Adam Ford | d42247d | 2020-12-11 06:01:46 -0600 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 | /* |
| 3 | * Copyright 2020 Compass Electronics Group, LLC |
| 4 | */ |
| 5 | |
| 6 | / { |
| 7 | leds { |
| 8 | compatible = "gpio-leds"; |
| 9 | |
| 10 | led-0 { |
| 11 | label = "gen_led0"; |
| 12 | gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>; |
| 13 | default-state = "off"; |
| 14 | }; |
| 15 | |
| 16 | led-1 { |
| 17 | label = "gen_led1"; |
| 18 | gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>; |
| 19 | default-state = "off"; |
| 20 | }; |
| 21 | |
| 22 | led-2 { |
| 23 | label = "gen_led2"; |
| 24 | gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>; |
| 25 | default-state = "off"; |
| 26 | }; |
| 27 | |
| 28 | led-3 { |
| 29 | pinctrl-names = "default"; |
| 30 | pinctrl-0 = <&pinctrl_led3>; |
| 31 | label = "heartbeat"; |
| 32 | gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; |
| 33 | linux,default-trigger = "heartbeat"; |
| 34 | }; |
| 35 | }; |
| 36 | |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 37 | reg_audio: regulator-audio { |
| 38 | compatible = "regulator-fixed"; |
| 39 | regulator-name = "3v3_aud"; |
| 40 | regulator-min-microvolt = <3300000>; |
| 41 | regulator-max-microvolt = <3300000>; |
| 42 | gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>; |
| 43 | enable-active-high; |
| 44 | }; |
| 45 | |
Adam Ford | d42247d | 2020-12-11 06:01:46 -0600 | [diff] [blame] | 46 | reg_usdhc2_vmmc: regulator-usdhc2 { |
| 47 | compatible = "regulator-fixed"; |
| 48 | regulator-name = "vsd_3v3"; |
| 49 | regulator-min-microvolt = <3300000>; |
| 50 | regulator-max-microvolt = <3300000>; |
| 51 | gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| 52 | enable-active-high; |
| 53 | }; |
| 54 | |
| 55 | reg_usb_otg_vbus: regulator-usb { |
| 56 | compatible = "regulator-fixed"; |
| 57 | pinctrl-names = "default"; |
| 58 | pinctrl-0 = <&pinctrl_reg_usb_otg>; |
| 59 | regulator-name = "usb_otg_vbus"; |
| 60 | regulator-min-microvolt = <5000000>; |
| 61 | regulator-max-microvolt = <5000000>; |
| 62 | gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; |
| 63 | enable-active-high; |
| 64 | }; |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 65 | |
| 66 | sound { |
| 67 | compatible = "fsl,imx-audio-wm8962"; |
| 68 | model = "wm8962-audio"; |
| 69 | audio-cpu = <&sai3>; |
| 70 | audio-codec = <&wm8962>; |
| 71 | audio-routing = |
| 72 | "Headphone Jack", "HPOUTL", |
| 73 | "Headphone Jack", "HPOUTR", |
| 74 | "Ext Spk", "SPKOUTL", |
| 75 | "Ext Spk", "SPKOUTR", |
| 76 | "AMIC", "MICBIAS", |
| 77 | "IN3R", "AMIC"; |
| 78 | }; |
Adam Ford | d42247d | 2020-12-11 06:01:46 -0600 | [diff] [blame] | 79 | }; |
| 80 | |
| 81 | &ecspi2 { |
| 82 | pinctrl-names = "default"; |
| 83 | pinctrl-0 = <&pinctrl_espi2>; |
| 84 | cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; |
| 85 | status = "okay"; |
| 86 | |
| 87 | eeprom@0 { |
| 88 | compatible = "microchip,at25160bn", "atmel,at25"; |
| 89 | reg = <0>; |
| 90 | spi-max-frequency = <5000000>; |
| 91 | spi-cpha; |
| 92 | spi-cpol; |
| 93 | pagesize = <32>; |
| 94 | size = <2048>; |
| 95 | address-width = <16>; |
| 96 | }; |
| 97 | }; |
| 98 | |
| 99 | &i2c4 { |
| 100 | clock-frequency = <400000>; |
| 101 | pinctrl-names = "default"; |
| 102 | pinctrl-0 = <&pinctrl_i2c4>; |
| 103 | status = "okay"; |
| 104 | |
| 105 | pca6416_0: gpio@20 { |
| 106 | compatible = "nxp,pcal6416"; |
| 107 | reg = <0x20>; |
| 108 | pinctrl-names = "default"; |
| 109 | pinctrl-0 = <&pinctrl_pcal6414>; |
| 110 | gpio-controller; |
| 111 | #gpio-cells = <2>; |
| 112 | interrupt-parent = <&gpio4>; |
| 113 | interrupts = <27 IRQ_TYPE_LEVEL_LOW>; |
| 114 | }; |
| 115 | |
| 116 | pca6416_1: gpio@21 { |
| 117 | compatible = "nxp,pcal6416"; |
| 118 | reg = <0x21>; |
| 119 | gpio-controller; |
| 120 | #gpio-cells = <2>; |
| 121 | interrupt-parent = <&gpio4>; |
| 122 | interrupts = <27 IRQ_TYPE_LEVEL_LOW>; |
| 123 | }; |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 124 | |
| 125 | wm8962: audio-codec@1a { |
| 126 | compatible = "wlf,wm8962"; |
| 127 | reg = <0x1a>; |
| 128 | clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; |
| 129 | clock-names = "xclk"; |
| 130 | DCVDD-supply = <®_audio>; |
| 131 | DBVDD-supply = <®_audio>; |
| 132 | AVDD-supply = <®_audio>; |
| 133 | CPVDD-supply = <®_audio>; |
| 134 | MICVDD-supply = <®_audio>; |
| 135 | PLLVDD-supply = <®_audio>; |
| 136 | SPKVDD1-supply = <®_audio>; |
| 137 | SPKVDD2-supply = <®_audio>; |
| 138 | gpio-cfg = < |
| 139 | 0x0000 /* 0:Default */ |
| 140 | 0x0000 /* 1:Default */ |
| 141 | 0x0000 /* 2:FN_DMICCLK */ |
| 142 | 0x0000 /* 3:Default */ |
| 143 | 0x0000 /* 4:FN_DMICCDAT */ |
| 144 | 0x0000 /* 5:Default */ |
| 145 | >; |
| 146 | }; |
Adam Ford | d42247d | 2020-12-11 06:01:46 -0600 | [diff] [blame] | 147 | }; |
| 148 | |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 149 | &easrc { |
| 150 | fsl,asrc-rate = <48000>; |
| 151 | status = "okay"; |
| 152 | }; |
| 153 | |
| 154 | &sai3 { |
| 155 | pinctrl-names = "default"; |
| 156 | pinctrl-0 = <&pinctrl_sai3>; |
| 157 | assigned-clocks = <&clk IMX8MN_CLK_SAI3>; |
| 158 | assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; |
| 159 | assigned-clock-rates = <24576000>; |
| 160 | fsl,sai-mclk-direction-output; |
| 161 | status = "okay"; |
| 162 | }; |
| 163 | |
Adam Ford | d42247d | 2020-12-11 06:01:46 -0600 | [diff] [blame] | 164 | &snvs_pwrkey { |
| 165 | status = "okay"; |
| 166 | }; |
| 167 | |
| 168 | &uart2 { /* console */ |
| 169 | pinctrl-names = "default"; |
| 170 | pinctrl-0 = <&pinctrl_uart2>; |
| 171 | status = "okay"; |
| 172 | }; |
| 173 | |
| 174 | &uart3 { |
| 175 | pinctrl-names = "default"; |
| 176 | pinctrl-0 = <&pinctrl_uart3>; |
| 177 | assigned-clocks = <&clk IMX8MN_CLK_UART3>; |
| 178 | assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; |
| 179 | status = "okay"; |
| 180 | }; |
| 181 | |
| 182 | &usbotg1 { |
| 183 | vbus-supply = <®_usb_otg_vbus>; |
| 184 | disable-over-current; |
| 185 | dr_mode="otg"; |
| 186 | status = "okay"; |
| 187 | }; |
| 188 | |
| 189 | &usdhc2 { |
| 190 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 191 | pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| 192 | pinctrl-1 = <&pinctrl_usdhc2_100mhz>; |
| 193 | pinctrl-2 = <&pinctrl_usdhc2_200mhz>; |
| 194 | bus-width = <4>; |
| 195 | vmmc-supply = <®_usdhc2_vmmc>; |
| 196 | status = "okay"; |
| 197 | }; |
| 198 | |
| 199 | &iomuxc { |
| 200 | pinctrl_espi2: espi2grp { |
| 201 | fsl,pins = < |
| 202 | MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 |
| 203 | MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 |
| 204 | MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 |
| 205 | MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41 |
| 206 | >; |
| 207 | }; |
| 208 | |
| 209 | pinctrl_i2c2: i2c2grp { |
| 210 | fsl,pins = < |
| 211 | MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 |
| 212 | MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 |
| 213 | >; |
| 214 | }; |
| 215 | |
| 216 | pinctrl_i2c4: i2c4grp { |
| 217 | fsl,pins = < |
| 218 | MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 |
| 219 | MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 |
| 220 | >; |
| 221 | }; |
| 222 | |
| 223 | pinctrl_led3: led3grp { |
| 224 | fsl,pins = < |
| 225 | MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x41 |
| 226 | >; |
| 227 | }; |
| 228 | |
| 229 | pinctrl_pcal6414: pcal6414-gpiogrp { |
| 230 | fsl,pins = < |
| 231 | MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 |
| 232 | >; |
| 233 | }; |
| 234 | |
| 235 | pinctrl_reg_usb_otg: reg-otggrp { |
| 236 | fsl,pins = < |
| 237 | MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 |
| 238 | >; |
| 239 | }; |
| 240 | |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 241 | pinctrl_sai3: sai3grp { |
| 242 | fsl,pins = < |
| 243 | MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 |
| 244 | MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 |
| 245 | MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 |
| 246 | MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 |
| 247 | MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 |
| 248 | >; |
| 249 | }; |
| 250 | |
Adam Ford | d42247d | 2020-12-11 06:01:46 -0600 | [diff] [blame] | 251 | pinctrl_uart2: uart2grp { |
| 252 | fsl,pins = < |
| 253 | MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 |
| 254 | MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 |
| 255 | >; |
| 256 | }; |
| 257 | |
| 258 | pinctrl_uart3: uart3grp { |
| 259 | fsl,pins = < |
| 260 | MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40 |
| 261 | MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40 |
| 262 | >; |
| 263 | }; |
| 264 | |
| 265 | pinctrl_usdhc2_gpio: usdhc2gpiogrp { |
| 266 | fsl,pins = < |
| 267 | MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x41 |
| 268 | MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 |
| 269 | >; |
| 270 | }; |
| 271 | |
| 272 | pinctrl_usdhc2: usdhc2grp { |
| 273 | fsl,pins = < |
| 274 | MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 |
| 275 | MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 |
| 276 | MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 |
| 277 | MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 |
| 278 | MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 |
| 279 | MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 |
| 280 | MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| 281 | >; |
| 282 | }; |
| 283 | |
| 284 | pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| 285 | fsl,pins = < |
| 286 | MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 |
| 287 | MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 |
| 288 | MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 |
| 289 | MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 |
| 290 | MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 |
| 291 | MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 |
| 292 | MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| 293 | >; |
| 294 | }; |
| 295 | |
| 296 | pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| 297 | fsl,pins = < |
| 298 | MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 |
| 299 | MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 |
| 300 | MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 |
| 301 | MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 |
| 302 | MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 |
| 303 | MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 |
| 304 | MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| 305 | >; |
| 306 | }; |
| 307 | }; |