| Anatolij Gustschin | fde0451 | 2012-08-31 01:29:57 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2012 |
| 3 | * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or |
| 6 | * modify it under the terms of the GNU General Public License as |
| 7 | * published by the Free Software Foundation; either version 2 of |
| 8 | * the License, or (at your option) any later version. |
| 9 | */ |
| 10 | |
| 11 | /* |
| 12 | * Valid values for CONFIG_SYS_TEXT_BASE are: |
| 13 | * 0xFC000000 boot low boot high (standard configuration) |
| 14 | * 0x00100000 boot from RAM (for testing only) |
| 15 | */ |
| 16 | #ifndef CONFIG_SYS_TEXT_BASE |
| 17 | #define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ |
| 18 | #endif |
| 19 | |
| 20 | /* Board specific flash config */ |
| 21 | #define CONFIG_SYS_FLASH_BASE 0xfc000000 |
| 22 | #define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ |
| 23 | /* max number of sectors on one chip */ |
| 24 | #define CONFIG_SYS_MAX_FLASH_SECT 512 |
| 25 | |
| 26 | /* |
| 27 | * Include common defines for all ifm boards |
| 28 | */ |
| 29 | #include "o2dnt-common.h" |
| 30 | |
| 31 | /* additional commands */ |
| 32 | #define CONFIG_CMD_ITEST |
| 33 | |
| 34 | /* |
| 35 | * GPIO configuration: |
| 36 | * CS1 SDRAM activate + no CAN + no PCI |
| 37 | */ |
| 38 | #define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 |
| 39 | |
| 40 | /* Other board specific configs */ |
| 41 | #define CONFIG_SYS_BOOTCS_CFG 0x00057d01 |
| 42 | #define CONFIG_SYS_RESET_ADDRESS 0xfc000000 |
| 43 | |
| 44 | #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ |
| 45 | #define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ |
| 46 | |
| 47 | #define CONFIG_BOARD_NAME "o2dnt2" |
| 48 | #define CONFIG_BOARD_BOOTCMD "run flash_self" |
| 49 | #define CONFIG_BOARD_MEM_LIMIT xstr(126) |
| 50 | #define BOARD_POST_CRC32_END xstr(0x01000000) |
| 51 | |
| 52 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 53 | CONFIG_IFM_DEFAULT_ENV_SETTINGS \ |
| 54 | CONFIG_IFM_DEFAULT_ENV_OLD \ |
| 55 | CONFIG_IFM_DEFAULT_ENV_NEW \ |
| 56 | "linbot=fc060000\0" \ |
| 57 | "lintop=fc15ffff\0" \ |
| 58 | "rambot=fc160000\0" \ |
| 59 | "ramtop=fc55ffff\0" \ |
| 60 | "jffbot=fc560000\0" \ |
| 61 | "jfftop=fce5ffff\0" \ |
| 62 | "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \ |
| 63 | "ubotop=fc03ffff\0" \ |
| 64 | "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \ |
| 65 | "calbot=fce60000\0" \ |
| 66 | "caltop=fcffffff\0" \ |
| 67 | "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \ |
| 68 | "cp.b ${fileaddr} ${calbot} ${filesize}\0" \ |
| 69 | "kernel_addr=0xfc060000\0" \ |
| 70 | "ramdisk_addr=0xfc160000\0" \ |
| 71 | "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ |
| 72 | "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" |