blob: 38ad14eff96dc8a62dc0bba4af2b5a41d8986583 [file] [log] [blame]
Stefan Roese3e103812014-10-22 12:13:14 +02001/*
2 * Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs.
3 *
4 * U-Boot version:
5 * Copyright (C) 2014 Stefan Roese <sr@denx.de>
6 *
7 * Based on the Linux version which is:
8 * Copyright (C) 2012 Marvell
9 *
10 * Rami Rosen <rosenr@marvell.com>
11 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
12 *
13 * SPDX-License-Identifier: GPL-2.0
14 */
15
16#include <common.h>
17#include <net.h>
18#include <netdev.h>
19#include <config.h>
20#include <malloc.h>
21#include <asm/io.h>
22#include <asm/errno.h>
23#include <phy.h>
24#include <miiphy.h>
25#include <watchdog.h>
26#include <asm/arch/cpu.h>
27#include <asm/arch/soc.h>
28#include <linux/compat.h>
29#include <linux/mbus.h>
30
31#if !defined(CONFIG_PHYLIB)
32# error Marvell mvneta requires PHYLIB
33#endif
34
35/* Some linux -> U-Boot compatibility stuff */
36#define netdev_err(dev, fmt, args...) \
37 printf(fmt, ##args)
38#define netdev_warn(dev, fmt, args...) \
39 printf(fmt, ##args)
40#define netdev_info(dev, fmt, args...) \
41 printf(fmt, ##args)
42
43#define CONFIG_NR_CPUS 1
Stefan Roese3e103812014-10-22 12:13:14 +020044#define ETH_HLEN 14 /* Total octets in header */
45
46/* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */
47#define WRAP (2 + ETH_HLEN + 4 + 32)
48#define MTU 1500
49#define RX_BUFFER_SIZE (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN))
50
51#define MVNETA_SMI_TIMEOUT 10000
52
53/* Registers */
54#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2))
55#define MVNETA_RXQ_HW_BUF_ALLOC BIT(1)
56#define MVNETA_RXQ_PKT_OFFSET_ALL_MASK (0xf << 8)
57#define MVNETA_RXQ_PKT_OFFSET_MASK(offs) ((offs) << 8)
58#define MVNETA_RXQ_THRESHOLD_REG(q) (0x14c0 + ((q) << 2))
59#define MVNETA_RXQ_NON_OCCUPIED(v) ((v) << 16)
60#define MVNETA_RXQ_BASE_ADDR_REG(q) (0x1480 + ((q) << 2))
61#define MVNETA_RXQ_SIZE_REG(q) (0x14a0 + ((q) << 2))
62#define MVNETA_RXQ_BUF_SIZE_SHIFT 19
63#define MVNETA_RXQ_BUF_SIZE_MASK (0x1fff << 19)
64#define MVNETA_RXQ_STATUS_REG(q) (0x14e0 + ((q) << 2))
65#define MVNETA_RXQ_OCCUPIED_ALL_MASK 0x3fff
66#define MVNETA_RXQ_STATUS_UPDATE_REG(q) (0x1500 + ((q) << 2))
67#define MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT 16
68#define MVNETA_RXQ_ADD_NON_OCCUPIED_MAX 255
69#define MVNETA_PORT_RX_RESET 0x1cc0
70#define MVNETA_PORT_RX_DMA_RESET BIT(0)
71#define MVNETA_PHY_ADDR 0x2000
72#define MVNETA_PHY_ADDR_MASK 0x1f
73#define MVNETA_SMI 0x2004
74#define MVNETA_PHY_REG_MASK 0x1f
75/* SMI register fields */
76#define MVNETA_SMI_DATA_OFFS 0 /* Data */
77#define MVNETA_SMI_DATA_MASK (0xffff << MVNETA_SMI_DATA_OFFS)
78#define MVNETA_SMI_DEV_ADDR_OFFS 16 /* PHY device address */
79#define MVNETA_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr*/
80#define MVNETA_SMI_OPCODE_OFFS 26 /* Write/Read opcode */
81#define MVNETA_SMI_OPCODE_READ (1 << MVNETA_SMI_OPCODE_OFFS)
82#define MVNETA_SMI_READ_VALID (1 << 27) /* Read Valid */
83#define MVNETA_SMI_BUSY (1 << 28) /* Busy */
84#define MVNETA_MBUS_RETRY 0x2010
85#define MVNETA_UNIT_INTR_CAUSE 0x2080
86#define MVNETA_UNIT_CONTROL 0x20B0
87#define MVNETA_PHY_POLLING_ENABLE BIT(1)
88#define MVNETA_WIN_BASE(w) (0x2200 + ((w) << 3))
89#define MVNETA_WIN_SIZE(w) (0x2204 + ((w) << 3))
90#define MVNETA_WIN_REMAP(w) (0x2280 + ((w) << 2))
91#define MVNETA_BASE_ADDR_ENABLE 0x2290
92#define MVNETA_PORT_CONFIG 0x2400
93#define MVNETA_UNI_PROMISC_MODE BIT(0)
94#define MVNETA_DEF_RXQ(q) ((q) << 1)
95#define MVNETA_DEF_RXQ_ARP(q) ((q) << 4)
96#define MVNETA_TX_UNSET_ERR_SUM BIT(12)
97#define MVNETA_DEF_RXQ_TCP(q) ((q) << 16)
98#define MVNETA_DEF_RXQ_UDP(q) ((q) << 19)
99#define MVNETA_DEF_RXQ_BPDU(q) ((q) << 22)
100#define MVNETA_RX_CSUM_WITH_PSEUDO_HDR BIT(25)
101#define MVNETA_PORT_CONFIG_DEFL_VALUE(q) (MVNETA_DEF_RXQ(q) | \
102 MVNETA_DEF_RXQ_ARP(q) | \
103 MVNETA_DEF_RXQ_TCP(q) | \
104 MVNETA_DEF_RXQ_UDP(q) | \
105 MVNETA_DEF_RXQ_BPDU(q) | \
106 MVNETA_TX_UNSET_ERR_SUM | \
107 MVNETA_RX_CSUM_WITH_PSEUDO_HDR)
108#define MVNETA_PORT_CONFIG_EXTEND 0x2404
109#define MVNETA_MAC_ADDR_LOW 0x2414
110#define MVNETA_MAC_ADDR_HIGH 0x2418
111#define MVNETA_SDMA_CONFIG 0x241c
112#define MVNETA_SDMA_BRST_SIZE_16 4
113#define MVNETA_RX_BRST_SZ_MASK(burst) ((burst) << 1)
114#define MVNETA_RX_NO_DATA_SWAP BIT(4)
115#define MVNETA_TX_NO_DATA_SWAP BIT(5)
116#define MVNETA_DESC_SWAP BIT(6)
117#define MVNETA_TX_BRST_SZ_MASK(burst) ((burst) << 22)
118#define MVNETA_PORT_STATUS 0x2444
119#define MVNETA_TX_IN_PRGRS BIT(1)
120#define MVNETA_TX_FIFO_EMPTY BIT(8)
121#define MVNETA_RX_MIN_FRAME_SIZE 0x247c
122#define MVNETA_SERDES_CFG 0x24A0
123#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
124#define MVNETA_QSGMII_SERDES_PROTO 0x0667
125#define MVNETA_TYPE_PRIO 0x24bc
126#define MVNETA_FORCE_UNI BIT(21)
127#define MVNETA_TXQ_CMD_1 0x24e4
128#define MVNETA_TXQ_CMD 0x2448
129#define MVNETA_TXQ_DISABLE_SHIFT 8
130#define MVNETA_TXQ_ENABLE_MASK 0x000000ff
131#define MVNETA_ACC_MODE 0x2500
132#define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2))
133#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff
134#define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00
135#define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2))
136
137/* Exception Interrupt Port/Queue Cause register */
138
139#define MVNETA_INTR_NEW_CAUSE 0x25a0
140#define MVNETA_INTR_NEW_MASK 0x25a4
141
142/* bits 0..7 = TXQ SENT, one bit per queue.
143 * bits 8..15 = RXQ OCCUP, one bit per queue.
144 * bits 16..23 = RXQ FREE, one bit per queue.
145 * bit 29 = OLD_REG_SUM, see old reg ?
146 * bit 30 = TX_ERR_SUM, one bit for 4 ports
147 * bit 31 = MISC_SUM, one bit for 4 ports
148 */
149#define MVNETA_TX_INTR_MASK(nr_txqs) (((1 << nr_txqs) - 1) << 0)
150#define MVNETA_TX_INTR_MASK_ALL (0xff << 0)
151#define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8)
152#define MVNETA_RX_INTR_MASK_ALL (0xff << 8)
153
154#define MVNETA_INTR_OLD_CAUSE 0x25a8
155#define MVNETA_INTR_OLD_MASK 0x25ac
156
157/* Data Path Port/Queue Cause Register */
158#define MVNETA_INTR_MISC_CAUSE 0x25b0
159#define MVNETA_INTR_MISC_MASK 0x25b4
160#define MVNETA_INTR_ENABLE 0x25b8
161
162#define MVNETA_RXQ_CMD 0x2680
163#define MVNETA_RXQ_DISABLE_SHIFT 8
164#define MVNETA_RXQ_ENABLE_MASK 0x000000ff
165#define MVETH_TXQ_TOKEN_COUNT_REG(q) (0x2700 + ((q) << 4))
166#define MVETH_TXQ_TOKEN_CFG_REG(q) (0x2704 + ((q) << 4))
167#define MVNETA_GMAC_CTRL_0 0x2c00
168#define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2
169#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
170#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
171#define MVNETA_GMAC_CTRL_2 0x2c08
172#define MVNETA_GMAC2_PCS_ENABLE BIT(3)
173#define MVNETA_GMAC2_PORT_RGMII BIT(4)
174#define MVNETA_GMAC2_PORT_RESET BIT(6)
175#define MVNETA_GMAC_STATUS 0x2c10
176#define MVNETA_GMAC_LINK_UP BIT(0)
177#define MVNETA_GMAC_SPEED_1000 BIT(1)
178#define MVNETA_GMAC_SPEED_100 BIT(2)
179#define MVNETA_GMAC_FULL_DUPLEX BIT(3)
180#define MVNETA_GMAC_RX_FLOW_CTRL_ENABLE BIT(4)
181#define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5)
182#define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6)
183#define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7)
184#define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c
185#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
186#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
187#define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
188#define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
189#define MVNETA_GMAC_AN_SPEED_EN BIT(7)
190#define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
191#define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
192#define MVNETA_MIB_COUNTERS_BASE 0x3080
193#define MVNETA_MIB_LATE_COLLISION 0x7c
194#define MVNETA_DA_FILT_SPEC_MCAST 0x3400
195#define MVNETA_DA_FILT_OTH_MCAST 0x3500
196#define MVNETA_DA_FILT_UCAST_BASE 0x3600
197#define MVNETA_TXQ_BASE_ADDR_REG(q) (0x3c00 + ((q) << 2))
198#define MVNETA_TXQ_SIZE_REG(q) (0x3c20 + ((q) << 2))
199#define MVNETA_TXQ_SENT_THRESH_ALL_MASK 0x3fff0000
200#define MVNETA_TXQ_SENT_THRESH_MASK(coal) ((coal) << 16)
201#define MVNETA_TXQ_UPDATE_REG(q) (0x3c60 + ((q) << 2))
202#define MVNETA_TXQ_DEC_SENT_SHIFT 16
203#define MVNETA_TXQ_STATUS_REG(q) (0x3c40 + ((q) << 2))
204#define MVNETA_TXQ_SENT_DESC_SHIFT 16
205#define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000
206#define MVNETA_PORT_TX_RESET 0x3cf0
207#define MVNETA_PORT_TX_DMA_RESET BIT(0)
208#define MVNETA_TX_MTU 0x3e0c
209#define MVNETA_TX_TOKEN_SIZE 0x3e14
210#define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff
211#define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
212#define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
213
214/* Descriptor ring Macros */
215#define MVNETA_QUEUE_NEXT_DESC(q, index) \
216 (((index) < (q)->last_desc) ? ((index) + 1) : 0)
217
218/* Various constants */
219
220/* Coalescing */
221#define MVNETA_TXDONE_COAL_PKTS 16
222#define MVNETA_RX_COAL_PKTS 32
223#define MVNETA_RX_COAL_USEC 100
224
225/* The two bytes Marvell header. Either contains a special value used
226 * by Marvell switches when a specific hardware mode is enabled (not
227 * supported by this driver) or is filled automatically by zeroes on
228 * the RX side. Those two bytes being at the front of the Ethernet
229 * header, they allow to have the IP header aligned on a 4 bytes
230 * boundary automatically: the hardware skips those two bytes on its
231 * own.
232 */
233#define MVNETA_MH_SIZE 2
234
235#define MVNETA_VLAN_TAG_LEN 4
236
237#define MVNETA_CPU_D_CACHE_LINE_SIZE 32
238#define MVNETA_TX_CSUM_MAX_SIZE 9800
239#define MVNETA_ACC_MODE_EXT 1
240
241/* Timeout constants */
242#define MVNETA_TX_DISABLE_TIMEOUT_MSEC 1000
243#define MVNETA_RX_DISABLE_TIMEOUT_MSEC 1000
244#define MVNETA_TX_FIFO_EMPTY_TIMEOUT 10000
245
246#define MVNETA_TX_MTU_MAX 0x3ffff
247
248/* Max number of Rx descriptors */
249#define MVNETA_MAX_RXD 16
250
251/* Max number of Tx descriptors */
252#define MVNETA_MAX_TXD 16
253
254/* descriptor aligned size */
255#define MVNETA_DESC_ALIGNED_SIZE 32
256
257struct mvneta_port {
258 void __iomem *base;
259 struct mvneta_rx_queue *rxqs;
260 struct mvneta_tx_queue *txqs;
261
262 u8 mcast_count[256];
263 u16 tx_ring_size;
264 u16 rx_ring_size;
265
266 phy_interface_t phy_interface;
267 unsigned int link;
268 unsigned int duplex;
269 unsigned int speed;
270
271 int init;
272 int phyaddr;
273 struct phy_device *phydev;
274 struct mii_dev *bus;
275};
276
277/* The mvneta_tx_desc and mvneta_rx_desc structures describe the
278 * layout of the transmit and reception DMA descriptors, and their
279 * layout is therefore defined by the hardware design
280 */
281
282#define MVNETA_TX_L3_OFF_SHIFT 0
283#define MVNETA_TX_IP_HLEN_SHIFT 8
284#define MVNETA_TX_L4_UDP BIT(16)
285#define MVNETA_TX_L3_IP6 BIT(17)
286#define MVNETA_TXD_IP_CSUM BIT(18)
287#define MVNETA_TXD_Z_PAD BIT(19)
288#define MVNETA_TXD_L_DESC BIT(20)
289#define MVNETA_TXD_F_DESC BIT(21)
290#define MVNETA_TXD_FLZ_DESC (MVNETA_TXD_Z_PAD | \
291 MVNETA_TXD_L_DESC | \
292 MVNETA_TXD_F_DESC)
293#define MVNETA_TX_L4_CSUM_FULL BIT(30)
294#define MVNETA_TX_L4_CSUM_NOT BIT(31)
295
296#define MVNETA_RXD_ERR_CRC 0x0
297#define MVNETA_RXD_ERR_SUMMARY BIT(16)
298#define MVNETA_RXD_ERR_OVERRUN BIT(17)
299#define MVNETA_RXD_ERR_LEN BIT(18)
300#define MVNETA_RXD_ERR_RESOURCE (BIT(17) | BIT(18))
301#define MVNETA_RXD_ERR_CODE_MASK (BIT(17) | BIT(18))
302#define MVNETA_RXD_L3_IP4 BIT(25)
303#define MVNETA_RXD_FIRST_LAST_DESC (BIT(26) | BIT(27))
304#define MVNETA_RXD_L4_CSUM_OK BIT(30)
305
306struct mvneta_tx_desc {
307 u32 command; /* Options used by HW for packet transmitting.*/
308 u16 reserverd1; /* csum_l4 (for future use) */
309 u16 data_size; /* Data size of transmitted packet in bytes */
310 u32 buf_phys_addr; /* Physical addr of transmitted buffer */
311 u32 reserved2; /* hw_cmd - (for future use, PMT) */
312 u32 reserved3[4]; /* Reserved - (for future use) */
313};
314
315struct mvneta_rx_desc {
316 u32 status; /* Info about received packet */
317 u16 reserved1; /* pnc_info - (for future use, PnC) */
318 u16 data_size; /* Size of received packet in bytes */
319
320 u32 buf_phys_addr; /* Physical address of the buffer */
321 u32 reserved2; /* pnc_flow_id (for future use, PnC) */
322
323 u32 buf_cookie; /* cookie for access to RX buffer in rx path */
324 u16 reserved3; /* prefetch_cmd, for future use */
325 u16 reserved4; /* csum_l4 - (for future use, PnC) */
326
327 u32 reserved5; /* pnc_extra PnC (for future use, PnC) */
328 u32 reserved6; /* hw_cmd (for future use, PnC and HWF) */
329};
330
331struct mvneta_tx_queue {
332 /* Number of this TX queue, in the range 0-7 */
333 u8 id;
334
335 /* Number of TX DMA descriptors in the descriptor ring */
336 int size;
337
338 /* Index of last TX DMA descriptor that was inserted */
339 int txq_put_index;
340
341 /* Index of the TX DMA descriptor to be cleaned up */
342 int txq_get_index;
343
344 /* Virtual address of the TX DMA descriptors array */
345 struct mvneta_tx_desc *descs;
346
347 /* DMA address of the TX DMA descriptors array */
348 dma_addr_t descs_phys;
349
350 /* Index of the last TX DMA descriptor */
351 int last_desc;
352
353 /* Index of the next TX DMA descriptor to process */
354 int next_desc_to_proc;
355};
356
357struct mvneta_rx_queue {
358 /* rx queue number, in the range 0-7 */
359 u8 id;
360
361 /* num of rx descriptors in the rx descriptor ring */
362 int size;
363
364 /* Virtual address of the RX DMA descriptors array */
365 struct mvneta_rx_desc *descs;
366
367 /* DMA address of the RX DMA descriptors array */
368 dma_addr_t descs_phys;
369
370 /* Index of the last RX DMA descriptor */
371 int last_desc;
372
373 /* Index of the next RX DMA descriptor to process */
374 int next_desc_to_proc;
375};
376
377/* U-Boot doesn't use the queues, so set the number to 1 */
378static int rxq_number = 1;
379static int txq_number = 1;
380static int rxq_def;
381
382struct buffer_location {
383 struct mvneta_tx_desc *tx_descs;
384 struct mvneta_rx_desc *rx_descs;
385 u32 rx_buffers;
386};
387
388/*
389 * All 4 interfaces use the same global buffer, since only one interface
390 * can be enabled at once
391 */
392static struct buffer_location buffer_loc;
393
394/*
395 * Page table entries are set to 1MB, or multiples of 1MB
396 * (not < 1MB). driver uses less bd's so use 1MB bdspace.
397 */
398#define BD_SPACE (1 << 20)
399
400/* Utility/helper methods */
401
402/* Write helper method */
403static void mvreg_write(struct mvneta_port *pp, u32 offset, u32 data)
404{
405 writel(data, pp->base + offset);
406}
407
408/* Read helper method */
409static u32 mvreg_read(struct mvneta_port *pp, u32 offset)
410{
411 return readl(pp->base + offset);
412}
413
414/* Clear all MIB counters */
415static void mvneta_mib_counters_clear(struct mvneta_port *pp)
416{
417 int i;
418
419 /* Perform dummy reads from MIB counters */
420 for (i = 0; i < MVNETA_MIB_LATE_COLLISION; i += 4)
421 mvreg_read(pp, (MVNETA_MIB_COUNTERS_BASE + i));
422}
423
424/* Rx descriptors helper methods */
425
426/* Checks whether the RX descriptor having this status is both the first
427 * and the last descriptor for the RX packet. Each RX packet is currently
428 * received through a single RX descriptor, so not having each RX
429 * descriptor with its first and last bits set is an error
430 */
431static int mvneta_rxq_desc_is_first_last(u32 status)
432{
433 return (status & MVNETA_RXD_FIRST_LAST_DESC) ==
434 MVNETA_RXD_FIRST_LAST_DESC;
435}
436
437/* Add number of descriptors ready to receive new packets */
438static void mvneta_rxq_non_occup_desc_add(struct mvneta_port *pp,
439 struct mvneta_rx_queue *rxq,
440 int ndescs)
441{
442 /* Only MVNETA_RXQ_ADD_NON_OCCUPIED_MAX (255) descriptors can
443 * be added at once
444 */
445 while (ndescs > MVNETA_RXQ_ADD_NON_OCCUPIED_MAX) {
446 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
447 (MVNETA_RXQ_ADD_NON_OCCUPIED_MAX <<
448 MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
449 ndescs -= MVNETA_RXQ_ADD_NON_OCCUPIED_MAX;
450 }
451
452 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id),
453 (ndescs << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT));
454}
455
456/* Get number of RX descriptors occupied by received packets */
457static int mvneta_rxq_busy_desc_num_get(struct mvneta_port *pp,
458 struct mvneta_rx_queue *rxq)
459{
460 u32 val;
461
462 val = mvreg_read(pp, MVNETA_RXQ_STATUS_REG(rxq->id));
463 return val & MVNETA_RXQ_OCCUPIED_ALL_MASK;
464}
465
466/* Update num of rx desc called upon return from rx path or
467 * from mvneta_rxq_drop_pkts().
468 */
469static void mvneta_rxq_desc_num_update(struct mvneta_port *pp,
470 struct mvneta_rx_queue *rxq,
471 int rx_done, int rx_filled)
472{
473 u32 val;
474
475 if ((rx_done <= 0xff) && (rx_filled <= 0xff)) {
476 val = rx_done |
477 (rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT);
478 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
479 return;
480 }
481
482 /* Only 255 descriptors can be added at once */
483 while ((rx_done > 0) || (rx_filled > 0)) {
484 if (rx_done <= 0xff) {
485 val = rx_done;
486 rx_done = 0;
487 } else {
488 val = 0xff;
489 rx_done -= 0xff;
490 }
491 if (rx_filled <= 0xff) {
492 val |= rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
493 rx_filled = 0;
494 } else {
495 val |= 0xff << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT;
496 rx_filled -= 0xff;
497 }
498 mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val);
499 }
500}
501
502/* Get pointer to next RX descriptor to be processed by SW */
503static struct mvneta_rx_desc *
504mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq)
505{
506 int rx_desc = rxq->next_desc_to_proc;
507
508 rxq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(rxq, rx_desc);
509 return rxq->descs + rx_desc;
510}
511
512/* Tx descriptors helper methods */
513
514/* Update HW with number of TX descriptors to be sent */
515static void mvneta_txq_pend_desc_add(struct mvneta_port *pp,
516 struct mvneta_tx_queue *txq,
517 int pend_desc)
518{
519 u32 val;
520
521 /* Only 255 descriptors can be added at once ; Assume caller
522 * process TX desriptors in quanta less than 256
523 */
524 val = pend_desc;
525 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
526}
527
528/* Get pointer to next TX descriptor to be processed (send) by HW */
529static struct mvneta_tx_desc *
530mvneta_txq_next_desc_get(struct mvneta_tx_queue *txq)
531{
532 int tx_desc = txq->next_desc_to_proc;
533
534 txq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(txq, tx_desc);
535 return txq->descs + tx_desc;
536}
537
538/* Set rxq buf size */
539static void mvneta_rxq_buf_size_set(struct mvneta_port *pp,
540 struct mvneta_rx_queue *rxq,
541 int buf_size)
542{
543 u32 val;
544
545 val = mvreg_read(pp, MVNETA_RXQ_SIZE_REG(rxq->id));
546
547 val &= ~MVNETA_RXQ_BUF_SIZE_MASK;
548 val |= ((buf_size >> 3) << MVNETA_RXQ_BUF_SIZE_SHIFT);
549
550 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), val);
551}
552
553/* Start the Ethernet port RX and TX activity */
554static void mvneta_port_up(struct mvneta_port *pp)
555{
556 int queue;
557 u32 q_map;
558
559 /* Enable all initialized TXs. */
560 mvneta_mib_counters_clear(pp);
561 q_map = 0;
562 for (queue = 0; queue < txq_number; queue++) {
563 struct mvneta_tx_queue *txq = &pp->txqs[queue];
564 if (txq->descs != NULL)
565 q_map |= (1 << queue);
566 }
567 mvreg_write(pp, MVNETA_TXQ_CMD, q_map);
568
569 /* Enable all initialized RXQs. */
570 q_map = 0;
571 for (queue = 0; queue < rxq_number; queue++) {
572 struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
573 if (rxq->descs != NULL)
574 q_map |= (1 << queue);
575 }
576 mvreg_write(pp, MVNETA_RXQ_CMD, q_map);
577}
578
579/* Stop the Ethernet port activity */
580static void mvneta_port_down(struct mvneta_port *pp)
581{
582 u32 val;
583 int count;
584
585 /* Stop Rx port activity. Check port Rx activity. */
586 val = mvreg_read(pp, MVNETA_RXQ_CMD) & MVNETA_RXQ_ENABLE_MASK;
587
588 /* Issue stop command for active channels only */
589 if (val != 0)
590 mvreg_write(pp, MVNETA_RXQ_CMD,
591 val << MVNETA_RXQ_DISABLE_SHIFT);
592
593 /* Wait for all Rx activity to terminate. */
594 count = 0;
595 do {
596 if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) {
597 netdev_warn(pp->dev,
598 "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n",
599 val);
600 break;
601 }
602 mdelay(1);
603
604 val = mvreg_read(pp, MVNETA_RXQ_CMD);
605 } while (val & 0xff);
606
607 /* Stop Tx port activity. Check port Tx activity. Issue stop
608 * command for active channels only
609 */
610 val = (mvreg_read(pp, MVNETA_TXQ_CMD)) & MVNETA_TXQ_ENABLE_MASK;
611
612 if (val != 0)
613 mvreg_write(pp, MVNETA_TXQ_CMD,
614 (val << MVNETA_TXQ_DISABLE_SHIFT));
615
616 /* Wait for all Tx activity to terminate. */
617 count = 0;
618 do {
619 if (count++ >= MVNETA_TX_DISABLE_TIMEOUT_MSEC) {
620 netdev_warn(pp->dev,
621 "TIMEOUT for TX stopped status=0x%08x\n",
622 val);
623 break;
624 }
625 mdelay(1);
626
627 /* Check TX Command reg that all Txqs are stopped */
628 val = mvreg_read(pp, MVNETA_TXQ_CMD);
629
630 } while (val & 0xff);
631
632 /* Double check to verify that TX FIFO is empty */
633 count = 0;
634 do {
635 if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) {
636 netdev_warn(pp->dev,
637 "TX FIFO empty timeout status=0x08%x\n",
638 val);
639 break;
640 }
641 mdelay(1);
642
643 val = mvreg_read(pp, MVNETA_PORT_STATUS);
644 } while (!(val & MVNETA_TX_FIFO_EMPTY) &&
645 (val & MVNETA_TX_IN_PRGRS));
646
647 udelay(200);
648}
649
650/* Enable the port by setting the port enable bit of the MAC control register */
651static void mvneta_port_enable(struct mvneta_port *pp)
652{
653 u32 val;
654
655 /* Enable port */
656 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
657 val |= MVNETA_GMAC0_PORT_ENABLE;
658 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
659}
660
661/* Disable the port and wait for about 200 usec before retuning */
662static void mvneta_port_disable(struct mvneta_port *pp)
663{
664 u32 val;
665
666 /* Reset the Enable bit in the Serial Control Register */
667 val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
668 val &= ~MVNETA_GMAC0_PORT_ENABLE;
669 mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
670
671 udelay(200);
672}
673
674/* Multicast tables methods */
675
676/* Set all entries in Unicast MAC Table; queue==-1 means reject all */
677static void mvneta_set_ucast_table(struct mvneta_port *pp, int queue)
678{
679 int offset;
680 u32 val;
681
682 if (queue == -1) {
683 val = 0;
684 } else {
685 val = 0x1 | (queue << 1);
686 val |= (val << 24) | (val << 16) | (val << 8);
687 }
688
689 for (offset = 0; offset <= 0xc; offset += 4)
690 mvreg_write(pp, MVNETA_DA_FILT_UCAST_BASE + offset, val);
691}
692
693/* Set all entries in Special Multicast MAC Table; queue==-1 means reject all */
694static void mvneta_set_special_mcast_table(struct mvneta_port *pp, int queue)
695{
696 int offset;
697 u32 val;
698
699 if (queue == -1) {
700 val = 0;
701 } else {
702 val = 0x1 | (queue << 1);
703 val |= (val << 24) | (val << 16) | (val << 8);
704 }
705
706 for (offset = 0; offset <= 0xfc; offset += 4)
707 mvreg_write(pp, MVNETA_DA_FILT_SPEC_MCAST + offset, val);
708}
709
710/* Set all entries in Other Multicast MAC Table. queue==-1 means reject all */
711static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue)
712{
713 int offset;
714 u32 val;
715
716 if (queue == -1) {
717 memset(pp->mcast_count, 0, sizeof(pp->mcast_count));
718 val = 0;
719 } else {
720 memset(pp->mcast_count, 1, sizeof(pp->mcast_count));
721 val = 0x1 | (queue << 1);
722 val |= (val << 24) | (val << 16) | (val << 8);
723 }
724
725 for (offset = 0; offset <= 0xfc; offset += 4)
726 mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
727}
728
729/* This method sets defaults to the NETA port:
730 * Clears interrupt Cause and Mask registers.
731 * Clears all MAC tables.
732 * Sets defaults to all registers.
733 * Resets RX and TX descriptor rings.
734 * Resets PHY.
735 * This method can be called after mvneta_port_down() to return the port
736 * settings to defaults.
737 */
738static void mvneta_defaults_set(struct mvneta_port *pp)
739{
740 int cpu;
741 int queue;
742 u32 val;
743
744 /* Clear all Cause registers */
745 mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0);
746 mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0);
747 mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
748
749 /* Mask all interrupts */
750 mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0);
751 mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0);
752 mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0);
753 mvreg_write(pp, MVNETA_INTR_ENABLE, 0);
754
755 /* Enable MBUS Retry bit16 */
756 mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20);
757
758 /* Set CPU queue access map - all CPUs have access to all RX
759 * queues and to all TX queues
760 */
761 for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++)
762 mvreg_write(pp, MVNETA_CPU_MAP(cpu),
763 (MVNETA_CPU_RXQ_ACCESS_ALL_MASK |
764 MVNETA_CPU_TXQ_ACCESS_ALL_MASK));
765
766 /* Reset RX and TX DMAs */
767 mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET);
768 mvreg_write(pp, MVNETA_PORT_TX_RESET, MVNETA_PORT_TX_DMA_RESET);
769
770 /* Disable Legacy WRR, Disable EJP, Release from reset */
771 mvreg_write(pp, MVNETA_TXQ_CMD_1, 0);
772 for (queue = 0; queue < txq_number; queue++) {
773 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(queue), 0);
774 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(queue), 0);
775 }
776
777 mvreg_write(pp, MVNETA_PORT_TX_RESET, 0);
778 mvreg_write(pp, MVNETA_PORT_RX_RESET, 0);
779
780 /* Set Port Acceleration Mode */
781 val = MVNETA_ACC_MODE_EXT;
782 mvreg_write(pp, MVNETA_ACC_MODE, val);
783
784 /* Update val of portCfg register accordingly with all RxQueue types */
785 val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def);
786 mvreg_write(pp, MVNETA_PORT_CONFIG, val);
787
788 val = 0;
789 mvreg_write(pp, MVNETA_PORT_CONFIG_EXTEND, val);
790 mvreg_write(pp, MVNETA_RX_MIN_FRAME_SIZE, 64);
791
792 /* Build PORT_SDMA_CONFIG_REG */
793 val = 0;
794
795 /* Default burst size */
796 val |= MVNETA_TX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
797 val |= MVNETA_RX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16);
798 val |= MVNETA_RX_NO_DATA_SWAP | MVNETA_TX_NO_DATA_SWAP;
799
800 /* Assign port SDMA configuration */
801 mvreg_write(pp, MVNETA_SDMA_CONFIG, val);
802
803 /* Enable PHY polling in hardware for U-Boot */
804 val = mvreg_read(pp, MVNETA_UNIT_CONTROL);
805 val |= MVNETA_PHY_POLLING_ENABLE;
806 mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
807
808 mvneta_set_ucast_table(pp, -1);
809 mvneta_set_special_mcast_table(pp, -1);
810 mvneta_set_other_mcast_table(pp, -1);
811}
812
813/* Set unicast address */
814static void mvneta_set_ucast_addr(struct mvneta_port *pp, u8 last_nibble,
815 int queue)
816{
817 unsigned int unicast_reg;
818 unsigned int tbl_offset;
819 unsigned int reg_offset;
820
821 /* Locate the Unicast table entry */
822 last_nibble = (0xf & last_nibble);
823
824 /* offset from unicast tbl base */
825 tbl_offset = (last_nibble / 4) * 4;
826
827 /* offset within the above reg */
828 reg_offset = last_nibble % 4;
829
830 unicast_reg = mvreg_read(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset));
831
832 if (queue == -1) {
833 /* Clear accepts frame bit at specified unicast DA tbl entry */
834 unicast_reg &= ~(0xff << (8 * reg_offset));
835 } else {
836 unicast_reg &= ~(0xff << (8 * reg_offset));
837 unicast_reg |= ((0x01 | (queue << 1)) << (8 * reg_offset));
838 }
839
840 mvreg_write(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset), unicast_reg);
841}
842
843/* Set mac address */
844static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr,
845 int queue)
846{
847 unsigned int mac_h;
848 unsigned int mac_l;
849
850 if (queue != -1) {
851 mac_l = (addr[4] << 8) | (addr[5]);
852 mac_h = (addr[0] << 24) | (addr[1] << 16) |
853 (addr[2] << 8) | (addr[3] << 0);
854
855 mvreg_write(pp, MVNETA_MAC_ADDR_LOW, mac_l);
856 mvreg_write(pp, MVNETA_MAC_ADDR_HIGH, mac_h);
857 }
858
859 /* Accept frames of this address */
860 mvneta_set_ucast_addr(pp, addr[5], queue);
861}
862
863/* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */
864static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc,
865 u32 phys_addr, u32 cookie)
866{
867 rx_desc->buf_cookie = cookie;
868 rx_desc->buf_phys_addr = phys_addr;
869}
870
871/* Decrement sent descriptors counter */
872static void mvneta_txq_sent_desc_dec(struct mvneta_port *pp,
873 struct mvneta_tx_queue *txq,
874 int sent_desc)
875{
876 u32 val;
877
878 /* Only 255 TX descriptors can be updated at once */
879 while (sent_desc > 0xff) {
880 val = 0xff << MVNETA_TXQ_DEC_SENT_SHIFT;
881 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
882 sent_desc = sent_desc - 0xff;
883 }
884
885 val = sent_desc << MVNETA_TXQ_DEC_SENT_SHIFT;
886 mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val);
887}
888
889/* Get number of TX descriptors already sent by HW */
890static int mvneta_txq_sent_desc_num_get(struct mvneta_port *pp,
891 struct mvneta_tx_queue *txq)
892{
893 u32 val;
894 int sent_desc;
895
896 val = mvreg_read(pp, MVNETA_TXQ_STATUS_REG(txq->id));
897 sent_desc = (val & MVNETA_TXQ_SENT_DESC_MASK) >>
898 MVNETA_TXQ_SENT_DESC_SHIFT;
899
900 return sent_desc;
901}
902
903/* Display more error info */
904static void mvneta_rx_error(struct mvneta_port *pp,
905 struct mvneta_rx_desc *rx_desc)
906{
907 u32 status = rx_desc->status;
908
909 if (!mvneta_rxq_desc_is_first_last(status)) {
910 netdev_err(pp->dev,
911 "bad rx status %08x (buffer oversize), size=%d\n",
912 status, rx_desc->data_size);
913 return;
914 }
915
916 switch (status & MVNETA_RXD_ERR_CODE_MASK) {
917 case MVNETA_RXD_ERR_CRC:
918 netdev_err(pp->dev, "bad rx status %08x (crc error), size=%d\n",
919 status, rx_desc->data_size);
920 break;
921 case MVNETA_RXD_ERR_OVERRUN:
922 netdev_err(pp->dev, "bad rx status %08x (overrun error), size=%d\n",
923 status, rx_desc->data_size);
924 break;
925 case MVNETA_RXD_ERR_LEN:
926 netdev_err(pp->dev, "bad rx status %08x (max frame length error), size=%d\n",
927 status, rx_desc->data_size);
928 break;
929 case MVNETA_RXD_ERR_RESOURCE:
930 netdev_err(pp->dev, "bad rx status %08x (resource error), size=%d\n",
931 status, rx_desc->data_size);
932 break;
933 }
934}
935
936static struct mvneta_rx_queue *mvneta_rxq_handle_get(struct mvneta_port *pp,
937 int rxq)
938{
939 return &pp->rxqs[rxq];
940}
941
942
943/* Drop packets received by the RXQ and free buffers */
944static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
945 struct mvneta_rx_queue *rxq)
946{
947 int rx_done;
948
949 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
950 if (rx_done)
951 mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
952}
953
954/* Handle rxq fill: allocates rxq skbs; called when initializing a port */
955static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq,
956 int num)
957{
958 int i;
959
960 for (i = 0; i < num; i++) {
961 u32 addr;
962
963 /* U-Boot special: Fill in the rx buffer addresses */
964 addr = buffer_loc.rx_buffers + (i * RX_BUFFER_SIZE);
965 mvneta_rx_desc_fill(rxq->descs + i, addr, addr);
966 }
967
968 /* Add this number of RX descriptors as non occupied (ready to
969 * get packets)
970 */
971 mvneta_rxq_non_occup_desc_add(pp, rxq, i);
972
973 return 0;
974}
975
976/* Rx/Tx queue initialization/cleanup methods */
977
978/* Create a specified RX queue */
979static int mvneta_rxq_init(struct mvneta_port *pp,
980 struct mvneta_rx_queue *rxq)
981
982{
983 rxq->size = pp->rx_ring_size;
984
985 /* Allocate memory for RX descriptors */
986 rxq->descs_phys = (dma_addr_t)rxq->descs;
987 if (rxq->descs == NULL)
988 return -ENOMEM;
989
990 rxq->last_desc = rxq->size - 1;
991
992 /* Set Rx descriptors queue starting address */
993 mvreg_write(pp, MVNETA_RXQ_BASE_ADDR_REG(rxq->id), rxq->descs_phys);
994 mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), rxq->size);
995
996 /* Fill RXQ with buffers from RX pool */
997 mvneta_rxq_buf_size_set(pp, rxq, RX_BUFFER_SIZE);
998 mvneta_rxq_fill(pp, rxq, rxq->size);
999
1000 return 0;
1001}
1002
1003/* Cleanup Rx queue */
1004static void mvneta_rxq_deinit(struct mvneta_port *pp,
1005 struct mvneta_rx_queue *rxq)
1006{
1007 mvneta_rxq_drop_pkts(pp, rxq);
1008
1009 rxq->descs = NULL;
1010 rxq->last_desc = 0;
1011 rxq->next_desc_to_proc = 0;
1012 rxq->descs_phys = 0;
1013}
1014
1015/* Create and initialize a tx queue */
1016static int mvneta_txq_init(struct mvneta_port *pp,
1017 struct mvneta_tx_queue *txq)
1018{
1019 txq->size = pp->tx_ring_size;
1020
1021 /* Allocate memory for TX descriptors */
1022 txq->descs_phys = (u32)txq->descs;
1023 if (txq->descs == NULL)
1024 return -ENOMEM;
1025
1026 txq->last_desc = txq->size - 1;
1027
1028 /* Set maximum bandwidth for enabled TXQs */
1029 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0x03ffffff);
1030 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0x3fffffff);
1031
1032 /* Set Tx descriptors queue starting address */
1033 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), txq->descs_phys);
1034 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), txq->size);
1035
1036 return 0;
1037}
1038
1039/* Free allocated resources when mvneta_txq_init() fails to allocate memory*/
1040static void mvneta_txq_deinit(struct mvneta_port *pp,
1041 struct mvneta_tx_queue *txq)
1042{
1043 txq->descs = NULL;
1044 txq->last_desc = 0;
1045 txq->next_desc_to_proc = 0;
1046 txq->descs_phys = 0;
1047
1048 /* Set minimum bandwidth for disabled TXQs */
1049 mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0);
1050 mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0);
1051
1052 /* Set Tx descriptors queue starting address and size */
1053 mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0);
1054 mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0);
1055}
1056
1057/* Cleanup all Tx queues */
1058static void mvneta_cleanup_txqs(struct mvneta_port *pp)
1059{
1060 int queue;
1061
1062 for (queue = 0; queue < txq_number; queue++)
1063 mvneta_txq_deinit(pp, &pp->txqs[queue]);
1064}
1065
1066/* Cleanup all Rx queues */
1067static void mvneta_cleanup_rxqs(struct mvneta_port *pp)
1068{
1069 int queue;
1070
1071 for (queue = 0; queue < rxq_number; queue++)
1072 mvneta_rxq_deinit(pp, &pp->rxqs[queue]);
1073}
1074
1075
1076/* Init all Rx queues */
1077static int mvneta_setup_rxqs(struct mvneta_port *pp)
1078{
1079 int queue;
1080
1081 for (queue = 0; queue < rxq_number; queue++) {
1082 int err = mvneta_rxq_init(pp, &pp->rxqs[queue]);
1083 if (err) {
1084 netdev_err(pp->dev, "%s: can't create rxq=%d\n",
1085 __func__, queue);
1086 mvneta_cleanup_rxqs(pp);
1087 return err;
1088 }
1089 }
1090
1091 return 0;
1092}
1093
1094/* Init all tx queues */
1095static int mvneta_setup_txqs(struct mvneta_port *pp)
1096{
1097 int queue;
1098
1099 for (queue = 0; queue < txq_number; queue++) {
1100 int err = mvneta_txq_init(pp, &pp->txqs[queue]);
1101 if (err) {
1102 netdev_err(pp->dev, "%s: can't create txq=%d\n",
1103 __func__, queue);
1104 mvneta_cleanup_txqs(pp);
1105 return err;
1106 }
1107 }
1108
1109 return 0;
1110}
1111
1112static void mvneta_start_dev(struct mvneta_port *pp)
1113{
1114 /* start the Rx/Tx activity */
1115 mvneta_port_enable(pp);
1116}
1117
1118static void mvneta_adjust_link(struct eth_device *dev)
1119{
1120 struct mvneta_port *pp = dev->priv;
1121 struct phy_device *phydev = pp->phydev;
1122 int status_change = 0;
1123
1124 if (phydev->link) {
1125 if ((pp->speed != phydev->speed) ||
1126 (pp->duplex != phydev->duplex)) {
1127 u32 val;
1128
1129 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
1130 val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
1131 MVNETA_GMAC_CONFIG_GMII_SPEED |
1132 MVNETA_GMAC_CONFIG_FULL_DUPLEX |
1133 MVNETA_GMAC_AN_SPEED_EN |
1134 MVNETA_GMAC_AN_DUPLEX_EN);
1135
1136 if (phydev->duplex)
1137 val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
1138
1139 if (phydev->speed == SPEED_1000)
1140 val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
1141 else
1142 val |= MVNETA_GMAC_CONFIG_MII_SPEED;
1143
1144 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1145
1146 pp->duplex = phydev->duplex;
1147 pp->speed = phydev->speed;
1148 }
1149 }
1150
1151 if (phydev->link != pp->link) {
1152 if (!phydev->link) {
1153 pp->duplex = -1;
1154 pp->speed = 0;
1155 }
1156
1157 pp->link = phydev->link;
1158 status_change = 1;
1159 }
1160
1161 if (status_change) {
1162 if (phydev->link) {
1163 u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
1164 val |= (MVNETA_GMAC_FORCE_LINK_PASS |
1165 MVNETA_GMAC_FORCE_LINK_DOWN);
1166 mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
1167 mvneta_port_up(pp);
1168 } else {
1169 mvneta_port_down(pp);
1170 }
1171 }
1172}
1173
1174static int mvneta_open(struct eth_device *dev)
1175{
1176 struct mvneta_port *pp = dev->priv;
1177 int ret;
1178
1179 ret = mvneta_setup_rxqs(pp);
1180 if (ret)
1181 return ret;
1182
1183 ret = mvneta_setup_txqs(pp);
1184 if (ret)
1185 return ret;
1186
1187 mvneta_adjust_link(dev);
1188
1189 mvneta_start_dev(pp);
1190
1191 return 0;
1192}
1193
1194/* Initialize hw */
1195static int mvneta_init(struct mvneta_port *pp)
1196{
1197 int queue;
1198
1199 /* Disable port */
1200 mvneta_port_disable(pp);
1201
1202 /* Set port default values */
1203 mvneta_defaults_set(pp);
1204
1205 pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue),
1206 GFP_KERNEL);
1207 if (!pp->txqs)
1208 return -ENOMEM;
1209
1210 /* U-Boot special: use preallocated area */
1211 pp->txqs[0].descs = buffer_loc.tx_descs;
1212
1213 /* Initialize TX descriptor rings */
1214 for (queue = 0; queue < txq_number; queue++) {
1215 struct mvneta_tx_queue *txq = &pp->txqs[queue];
1216 txq->id = queue;
1217 txq->size = pp->tx_ring_size;
1218 }
1219
1220 pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue),
1221 GFP_KERNEL);
1222 if (!pp->rxqs) {
1223 kfree(pp->txqs);
1224 return -ENOMEM;
1225 }
1226
1227 /* U-Boot special: use preallocated area */
1228 pp->rxqs[0].descs = buffer_loc.rx_descs;
1229
1230 /* Create Rx descriptor rings */
1231 for (queue = 0; queue < rxq_number; queue++) {
1232 struct mvneta_rx_queue *rxq = &pp->rxqs[queue];
1233 rxq->id = queue;
1234 rxq->size = pp->rx_ring_size;
1235 }
1236
1237 return 0;
1238}
1239
1240/* platform glue : initialize decoding windows */
1241static void mvneta_conf_mbus_windows(struct mvneta_port *pp)
1242{
1243 const struct mbus_dram_target_info *dram;
1244 u32 win_enable;
1245 u32 win_protect;
1246 int i;
1247
1248 dram = mvebu_mbus_dram_info();
1249 for (i = 0; i < 6; i++) {
1250 mvreg_write(pp, MVNETA_WIN_BASE(i), 0);
1251 mvreg_write(pp, MVNETA_WIN_SIZE(i), 0);
1252
1253 if (i < 4)
1254 mvreg_write(pp, MVNETA_WIN_REMAP(i), 0);
1255 }
1256
1257 win_enable = 0x3f;
1258 win_protect = 0;
1259
1260 for (i = 0; i < dram->num_cs; i++) {
1261 const struct mbus_dram_window *cs = dram->cs + i;
1262 mvreg_write(pp, MVNETA_WIN_BASE(i), (cs->base & 0xffff0000) |
1263 (cs->mbus_attr << 8) | dram->mbus_dram_target_id);
1264
1265 mvreg_write(pp, MVNETA_WIN_SIZE(i),
1266 (cs->size - 1) & 0xffff0000);
1267
1268 win_enable &= ~(1 << i);
1269 win_protect |= 3 << (2 * i);
1270 }
1271
1272 mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
1273}
1274
1275/* Power up the port */
1276static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
1277{
1278 u32 ctrl;
1279
1280 /* MAC Cause register should be cleared */
1281 mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
1282
1283 ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
1284
1285 /* Even though it might look weird, when we're configured in
1286 * SGMII or QSGMII mode, the RGMII bit needs to be set.
1287 */
1288 switch (phy_mode) {
1289 case PHY_INTERFACE_MODE_QSGMII:
1290 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
1291 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
1292 break;
1293 case PHY_INTERFACE_MODE_SGMII:
1294 mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
1295 ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
1296 break;
1297 case PHY_INTERFACE_MODE_RGMII:
1298 case PHY_INTERFACE_MODE_RGMII_ID:
1299 ctrl |= MVNETA_GMAC2_PORT_RGMII;
1300 break;
1301 default:
1302 return -EINVAL;
1303 }
1304
1305 /* Cancel Port Reset */
1306 ctrl &= ~MVNETA_GMAC2_PORT_RESET;
1307 mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
1308
1309 while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
1310 MVNETA_GMAC2_PORT_RESET) != 0)
1311 continue;
1312
1313 return 0;
1314}
1315
1316/* Device initialization routine */
1317static int mvneta_probe(struct eth_device *dev)
1318{
1319 struct mvneta_port *pp = dev->priv;
1320 int err;
1321
1322 pp->tx_ring_size = MVNETA_MAX_TXD;
1323 pp->rx_ring_size = MVNETA_MAX_RXD;
1324
1325 err = mvneta_init(pp);
1326 if (err < 0) {
1327 dev_err(&pdev->dev, "can't init eth hal\n");
1328 return err;
1329 }
1330
1331 mvneta_conf_mbus_windows(pp);
1332
1333 mvneta_mac_addr_set(pp, dev->enetaddr, rxq_def);
1334
1335 err = mvneta_port_power_up(pp, pp->phy_interface);
1336 if (err < 0) {
1337 dev_err(&pdev->dev, "can't power up port\n");
1338 return err;
1339 }
1340
1341 /* Call open() now as it needs to be done before runing send() */
1342 mvneta_open(dev);
1343
1344 return 0;
1345}
1346
1347/* U-Boot only functions follow here */
1348
1349/* SMI / MDIO functions */
1350
1351static int smi_wait_ready(struct mvneta_port *pp)
1352{
1353 u32 timeout = MVNETA_SMI_TIMEOUT;
1354 u32 smi_reg;
1355
1356 /* wait till the SMI is not busy */
1357 do {
1358 /* read smi register */
1359 smi_reg = mvreg_read(pp, MVNETA_SMI);
1360 if (timeout-- == 0) {
1361 printf("Error: SMI busy timeout\n");
1362 return -EFAULT;
1363 }
1364 } while (smi_reg & MVNETA_SMI_BUSY);
1365
1366 return 0;
1367}
1368
1369/*
1370 * smi_reg_read - miiphy_read callback function.
1371 *
1372 * Returns 16bit phy register value, or 0xffff on error
1373 */
1374static int smi_reg_read(const char *devname, u8 phy_adr, u8 reg_ofs, u16 *data)
1375{
1376 struct eth_device *dev = eth_get_dev_by_name(devname);
1377 struct mvneta_port *pp = dev->priv;
1378 u32 smi_reg;
1379 u32 timeout;
1380
1381 /* check parameters */
1382 if (phy_adr > MVNETA_PHY_ADDR_MASK) {
1383 printf("Error: Invalid PHY address %d\n", phy_adr);
1384 return -EFAULT;
1385 }
1386
1387 if (reg_ofs > MVNETA_PHY_REG_MASK) {
1388 printf("Err: Invalid register offset %d\n", reg_ofs);
1389 return -EFAULT;
1390 }
1391
1392 /* wait till the SMI is not busy */
1393 if (smi_wait_ready(pp) < 0)
1394 return -EFAULT;
1395
1396 /* fill the phy address and regiser offset and read opcode */
1397 smi_reg = (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
1398 | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS)
1399 | MVNETA_SMI_OPCODE_READ;
1400
1401 /* write the smi register */
1402 mvreg_write(pp, MVNETA_SMI, smi_reg);
1403
1404 /*wait till read value is ready */
1405 timeout = MVNETA_SMI_TIMEOUT;
1406
1407 do {
1408 /* read smi register */
1409 smi_reg = mvreg_read(pp, MVNETA_SMI);
1410 if (timeout-- == 0) {
1411 printf("Err: SMI read ready timeout\n");
1412 return -EFAULT;
1413 }
1414 } while (!(smi_reg & MVNETA_SMI_READ_VALID));
1415
1416 /* Wait for the data to update in the SMI register */
1417 for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++)
1418 ;
1419
1420 *data = (u16)(mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK);
1421
1422 return 0;
1423}
1424
1425/*
1426 * smi_reg_write - imiiphy_write callback function.
1427 *
1428 * Returns 0 if write succeed, -EINVAL on bad parameters
1429 * -ETIME on timeout
1430 */
1431static int smi_reg_write(const char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
1432{
1433 struct eth_device *dev = eth_get_dev_by_name(devname);
1434 struct mvneta_port *pp = dev->priv;
1435 u32 smi_reg;
1436
1437 /* check parameters */
1438 if (phy_adr > MVNETA_PHY_ADDR_MASK) {
1439 printf("Error: Invalid PHY address %d\n", phy_adr);
1440 return -EFAULT;
1441 }
1442
1443 if (reg_ofs > MVNETA_PHY_REG_MASK) {
1444 printf("Err: Invalid register offset %d\n", reg_ofs);
1445 return -EFAULT;
1446 }
1447
1448 /* wait till the SMI is not busy */
1449 if (smi_wait_ready(pp) < 0)
1450 return -EFAULT;
1451
1452 /* fill the phy addr and reg offset and write opcode and data */
1453 smi_reg = (data << MVNETA_SMI_DATA_OFFS);
1454 smi_reg |= (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
1455 | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS);
1456 smi_reg &= ~MVNETA_SMI_OPCODE_READ;
1457
1458 /* write the smi register */
1459 mvreg_write(pp, MVNETA_SMI, smi_reg);
1460
1461 return 0;
1462}
1463
1464static int mvneta_init_u_boot(struct eth_device *dev, bd_t *bis)
1465{
1466 struct mvneta_port *pp = dev->priv;
1467 struct phy_device *phydev;
1468
1469 mvneta_port_power_up(pp, pp->phy_interface);
1470
1471 if (!pp->init || pp->link == 0) {
1472 /* Set phy address of the port */
1473 mvreg_write(pp, MVNETA_PHY_ADDR, pp->phyaddr);
1474 phydev = phy_connect(pp->bus, pp->phyaddr, dev,
1475 pp->phy_interface);
1476
1477 pp->phydev = phydev;
1478 phy_config(phydev);
1479 phy_startup(phydev);
1480 if (!phydev->link) {
1481 printf("%s: No link.\n", phydev->dev->name);
1482 return -1;
1483 }
1484
1485 /* Full init on first call */
1486 mvneta_probe(dev);
1487 pp->init = 1;
1488 } else {
1489 /* Upon all following calls, this is enough */
1490 mvneta_port_up(pp);
1491 mvneta_port_enable(pp);
1492 }
1493
1494 return 0;
1495}
1496
1497static int mvneta_send(struct eth_device *dev, void *ptr, int len)
1498{
1499 struct mvneta_port *pp = dev->priv;
1500 struct mvneta_tx_queue *txq = &pp->txqs[0];
1501 struct mvneta_tx_desc *tx_desc;
1502 int sent_desc;
1503 u32 timeout = 0;
1504
1505 /* Get a descriptor for the first part of the packet */
1506 tx_desc = mvneta_txq_next_desc_get(txq);
1507
1508 tx_desc->buf_phys_addr = (u32)ptr;
1509 tx_desc->data_size = len;
1510 flush_dcache_range((u32)ptr, (u32)ptr + len);
1511
1512 /* First and Last descriptor */
1513 tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC;
1514 mvneta_txq_pend_desc_add(pp, txq, 1);
1515
1516 /* Wait for packet to be sent (queue might help with speed here) */
1517 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
1518 while (!sent_desc) {
1519 if (timeout++ > 10000) {
1520 printf("timeout: packet not sent\n");
1521 return -1;
1522 }
1523 sent_desc = mvneta_txq_sent_desc_num_get(pp, txq);
1524 }
1525
1526 /* txDone has increased - hw sent packet */
1527 mvneta_txq_sent_desc_dec(pp, txq, sent_desc);
1528 return 0;
1529
1530 return 0;
1531}
1532
1533static int mvneta_recv(struct eth_device *dev)
1534{
1535 struct mvneta_port *pp = dev->priv;
1536 int rx_done;
1537 int packets_done;
1538 struct mvneta_rx_queue *rxq;
1539
1540 /* get rx queue */
1541 rxq = mvneta_rxq_handle_get(pp, rxq_def);
1542 rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
1543 packets_done = rx_done;
1544
1545 while (packets_done--) {
1546 struct mvneta_rx_desc *rx_desc;
1547 unsigned char *data;
1548 u32 rx_status;
1549 int rx_bytes;
1550
1551 /*
1552 * No cache invalidation needed here, since the desc's are
1553 * located in a uncached memory region
1554 */
1555 rx_desc = mvneta_rxq_next_desc_get(rxq);
1556
1557 rx_status = rx_desc->status;
1558 if (!mvneta_rxq_desc_is_first_last(rx_status) ||
1559 (rx_status & MVNETA_RXD_ERR_SUMMARY)) {
1560 mvneta_rx_error(pp, rx_desc);
1561 /* leave the descriptor untouched */
1562 continue;
1563 }
1564
1565 /* 2 bytes for marvell header. 4 bytes for crc */
1566 rx_bytes = rx_desc->data_size - 6;
1567
1568 /* give packet to stack - skip on first 2 bytes */
1569 data = (u8 *)rx_desc->buf_cookie + 2;
1570 /*
1571 * No cache invalidation needed here, since the rx_buffer's are
1572 * located in a uncached memory region
1573 */
Joe Hershberger9f09a362015-04-08 01:41:06 -05001574 net_process_received_packet(data, rx_bytes);
Stefan Roese3e103812014-10-22 12:13:14 +02001575 }
1576
1577 /* Update rxq management counters */
1578 if (rx_done)
1579 mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
1580
1581 return 0;
1582}
1583
1584static void mvneta_halt(struct eth_device *dev)
1585{
1586 struct mvneta_port *pp = dev->priv;
1587
1588 mvneta_port_down(pp);
1589 mvneta_port_disable(pp);
1590}
1591
1592int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr)
1593{
1594 struct eth_device *dev;
1595 struct mvneta_port *pp;
1596 void *bd_space;
1597
1598 dev = calloc(1, sizeof(*dev));
1599 if (dev == NULL)
1600 return -ENOMEM;
1601
1602 pp = calloc(1, sizeof(*pp));
1603 if (pp == NULL)
1604 return -ENOMEM;
1605
1606 dev->priv = pp;
1607
1608 /*
1609 * Allocate buffer area for descs and rx_buffers. This is only
1610 * done once for all interfaces. As only one interface can
1611 * be active. Make this area DMA save by disabling the D-cache
1612 */
1613 if (!buffer_loc.tx_descs) {
1614 /* Align buffer area for descs and rx_buffers to 1MiB */
1615 bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE);
1616 mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE,
1617 DCACHE_OFF);
1618 buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space;
1619 buffer_loc.rx_descs = (struct mvneta_rx_desc *)
1620 ((u32)bd_space +
1621 MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc));
1622 buffer_loc.rx_buffers = (u32)
1623 (bd_space +
1624 MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc) +
1625 MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc));
1626 }
1627
1628 sprintf(dev->name, "neta%d", devnum);
1629
1630 pp->base = (void __iomem *)base_addr;
1631 dev->iobase = base_addr;
1632 dev->init = mvneta_init_u_boot;
1633 dev->halt = mvneta_halt;
1634 dev->send = mvneta_send;
1635 dev->recv = mvneta_recv;
1636 dev->write_hwaddr = NULL;
1637
1638 /*
1639 * The PHY interface type is configured via the
1640 * board specific CONFIG_SYS_NETA_INTERFACE_TYPE
1641 * define.
1642 */
1643 pp->phy_interface = CONFIG_SYS_NETA_INTERFACE_TYPE;
1644
1645 eth_register(dev);
1646
1647 pp->phyaddr = phy_addr;
1648 miiphy_register(dev->name, smi_reg_read, smi_reg_write);
1649 pp->bus = miiphy_get_dev_by_name(dev->name);
1650
1651 return 1;
1652}