Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ or MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 7 | #include <dt-bindings/clock/sun50i-h6-ccu.h> |
| 8 | #include <dt-bindings/clock/sun50i-h6-r-ccu.h> |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 9 | #include <dt-bindings/clock/sun8i-de2.h> |
| 10 | #include <dt-bindings/clock/sun8i-tcon-top.h> |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 11 | #include <dt-bindings/reset/sun50i-h6-ccu.h> |
| 12 | #include <dt-bindings/reset/sun50i-h6-r-ccu.h> |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 13 | #include <dt-bindings/reset/sun8i-de2.h> |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 14 | |
| 15 | / { |
| 16 | interrupt-parent = <&gic>; |
| 17 | #address-cells = <1>; |
| 18 | #size-cells = <1>; |
| 19 | |
| 20 | cpus { |
| 21 | #address-cells = <1>; |
| 22 | #size-cells = <0>; |
| 23 | |
| 24 | cpu0: cpu@0 { |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 25 | compatible = "arm,cortex-a53"; |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 26 | device_type = "cpu"; |
| 27 | reg = <0>; |
| 28 | enable-method = "psci"; |
| 29 | }; |
| 30 | |
| 31 | cpu1: cpu@1 { |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 32 | compatible = "arm,cortex-a53"; |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 33 | device_type = "cpu"; |
| 34 | reg = <1>; |
| 35 | enable-method = "psci"; |
| 36 | }; |
| 37 | |
| 38 | cpu2: cpu@2 { |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 39 | compatible = "arm,cortex-a53"; |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 40 | device_type = "cpu"; |
| 41 | reg = <2>; |
| 42 | enable-method = "psci"; |
| 43 | }; |
| 44 | |
| 45 | cpu3: cpu@3 { |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 46 | compatible = "arm,cortex-a53"; |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 47 | device_type = "cpu"; |
| 48 | reg = <3>; |
| 49 | enable-method = "psci"; |
| 50 | }; |
| 51 | }; |
| 52 | |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 53 | de: display-engine { |
| 54 | compatible = "allwinner,sun50i-h6-display-engine"; |
| 55 | allwinner,pipelines = <&mixer0>; |
| 56 | status = "disabled"; |
| 57 | }; |
| 58 | |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 59 | iosc: internal-osc-clk { |
| 60 | #clock-cells = <0>; |
| 61 | compatible = "fixed-clock"; |
| 62 | clock-frequency = <16000000>; |
| 63 | clock-accuracy = <300000000>; |
| 64 | clock-output-names = "iosc"; |
| 65 | }; |
| 66 | |
| 67 | osc24M: osc24M_clk { |
| 68 | #clock-cells = <0>; |
| 69 | compatible = "fixed-clock"; |
| 70 | clock-frequency = <24000000>; |
| 71 | clock-output-names = "osc24M"; |
| 72 | }; |
| 73 | |
| 74 | osc32k: osc32k_clk { |
| 75 | #clock-cells = <0>; |
| 76 | compatible = "fixed-clock"; |
| 77 | clock-frequency = <32768>; |
| 78 | clock-output-names = "osc32k"; |
| 79 | }; |
| 80 | |
| 81 | psci { |
| 82 | compatible = "arm,psci-0.2"; |
| 83 | method = "smc"; |
| 84 | }; |
| 85 | |
| 86 | timer { |
| 87 | compatible = "arm,armv8-timer"; |
| 88 | interrupts = <GIC_PPI 13 |
| 89 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| 90 | <GIC_PPI 14 |
| 91 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| 92 | <GIC_PPI 11 |
| 93 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| 94 | <GIC_PPI 10 |
| 95 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 96 | }; |
| 97 | |
| 98 | soc { |
| 99 | compatible = "simple-bus"; |
| 100 | #address-cells = <1>; |
| 101 | #size-cells = <1>; |
| 102 | ranges; |
| 103 | |
Clément Péron | 725089c | 2019-08-25 18:04:18 +0200 | [diff] [blame] | 104 | bus@1000000 { |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 105 | compatible = "allwinner,sun50i-h6-de3", |
| 106 | "allwinner,sun50i-a64-de2"; |
| 107 | reg = <0x1000000 0x400000>; |
| 108 | allwinner,sram = <&de2_sram 1>; |
| 109 | #address-cells = <1>; |
| 110 | #size-cells = <1>; |
| 111 | ranges = <0 0x1000000 0x400000>; |
| 112 | |
| 113 | display_clocks: clock@0 { |
| 114 | compatible = "allwinner,sun50i-h6-de3-clk"; |
| 115 | reg = <0x0 0x10000>; |
| 116 | clocks = <&ccu CLK_DE>, |
| 117 | <&ccu CLK_BUS_DE>; |
| 118 | clock-names = "mod", |
| 119 | "bus"; |
| 120 | resets = <&ccu RST_BUS_DE>; |
| 121 | #clock-cells = <1>; |
| 122 | #reset-cells = <1>; |
| 123 | }; |
| 124 | |
| 125 | mixer0: mixer@100000 { |
| 126 | compatible = "allwinner,sun50i-h6-de3-mixer-0"; |
| 127 | reg = <0x100000 0x100000>; |
| 128 | clocks = <&display_clocks CLK_BUS_MIXER0>, |
| 129 | <&display_clocks CLK_MIXER0>; |
| 130 | clock-names = "bus", |
| 131 | "mod"; |
| 132 | resets = <&display_clocks RST_MIXER0>; |
| 133 | |
| 134 | ports { |
| 135 | #address-cells = <1>; |
| 136 | #size-cells = <0>; |
| 137 | |
| 138 | mixer0_out: port@1 { |
| 139 | reg = <1>; |
| 140 | |
| 141 | mixer0_out_tcon_top_mixer0: endpoint { |
| 142 | remote-endpoint = <&tcon_top_mixer0_in_mixer0>; |
| 143 | }; |
| 144 | }; |
| 145 | }; |
| 146 | }; |
| 147 | }; |
| 148 | |
| 149 | video-codec@1c0e000 { |
| 150 | compatible = "allwinner,sun50i-h6-video-engine"; |
| 151 | reg = <0x01c0e000 0x2000>; |
| 152 | clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, |
| 153 | <&ccu CLK_MBUS_VE>; |
| 154 | clock-names = "ahb", "mod", "ram"; |
| 155 | resets = <&ccu RST_BUS_VE>; |
| 156 | interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 157 | allwinner,sram = <&ve_sram 1>; |
| 158 | }; |
| 159 | |
| 160 | syscon: syscon@3000000 { |
| 161 | compatible = "allwinner,sun50i-h6-system-control", |
| 162 | "allwinner,sun50i-a64-system-control"; |
| 163 | reg = <0x03000000 0x1000>; |
| 164 | #address-cells = <1>; |
| 165 | #size-cells = <1>; |
| 166 | ranges; |
| 167 | |
| 168 | sram_c: sram@28000 { |
| 169 | compatible = "mmio-sram"; |
| 170 | reg = <0x00028000 0x1e000>; |
| 171 | #address-cells = <1>; |
| 172 | #size-cells = <1>; |
| 173 | ranges = <0 0x00028000 0x1e000>; |
| 174 | |
| 175 | de2_sram: sram-section@0 { |
| 176 | compatible = "allwinner,sun50i-h6-sram-c", |
| 177 | "allwinner,sun50i-a64-sram-c"; |
| 178 | reg = <0x0000 0x1e000>; |
| 179 | }; |
| 180 | }; |
| 181 | |
| 182 | sram_c1: sram@1a00000 { |
| 183 | compatible = "mmio-sram"; |
| 184 | reg = <0x01a00000 0x200000>; |
| 185 | #address-cells = <1>; |
| 186 | #size-cells = <1>; |
| 187 | ranges = <0 0x01a00000 0x200000>; |
| 188 | |
| 189 | ve_sram: sram-section@0 { |
| 190 | compatible = "allwinner,sun50i-h6-sram-c1", |
| 191 | "allwinner,sun4i-a10-sram-c1"; |
| 192 | reg = <0x000000 0x200000>; |
| 193 | }; |
| 194 | }; |
| 195 | }; |
| 196 | |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 197 | ccu: clock@3001000 { |
| 198 | compatible = "allwinner,sun50i-h6-ccu"; |
| 199 | reg = <0x03001000 0x1000>; |
| 200 | clocks = <&osc24M>, <&osc32k>, <&iosc>; |
| 201 | clock-names = "hosc", "losc", "iosc"; |
| 202 | #clock-cells = <1>; |
| 203 | #reset-cells = <1>; |
| 204 | }; |
| 205 | |
Clément Péron | 725089c | 2019-08-25 18:04:18 +0200 | [diff] [blame] | 206 | dma: dma-controller@3002000 { |
| 207 | compatible = "allwinner,sun50i-h6-dma"; |
| 208 | reg = <0x03002000 0x1000>; |
| 209 | interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 210 | clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; |
| 211 | clock-names = "bus", "mbus"; |
| 212 | dma-channels = <16>; |
| 213 | dma-requests = <46>; |
| 214 | resets = <&ccu RST_BUS_DMA>; |
| 215 | #dma-cells = <1>; |
| 216 | }; |
| 217 | |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 218 | sid: sid@3006000 { |
| 219 | compatible = "allwinner,sun50i-h6-sid"; |
| 220 | reg = <0x03006000 0x400>; |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 221 | }; |
| 222 | |
Clément Péron | 725089c | 2019-08-25 18:04:18 +0200 | [diff] [blame] | 223 | watchdog: watchdog@30090a0 { |
| 224 | compatible = "allwinner,sun50i-h6-wdt", |
| 225 | "allwinner,sun6i-a31-wdt"; |
| 226 | reg = <0x030090a0 0x20>; |
| 227 | interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 228 | /* Broken on some H6 boards */ |
| 229 | status = "disabled"; |
| 230 | }; |
| 231 | |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 232 | pio: pinctrl@300b000 { |
| 233 | compatible = "allwinner,sun50i-h6-pinctrl"; |
| 234 | reg = <0x0300b000 0x400>; |
| 235 | interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| 236 | <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 237 | <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 238 | <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; |
| 239 | clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>; |
| 240 | clock-names = "apb", "hosc", "losc"; |
| 241 | gpio-controller; |
| 242 | #gpio-cells = <3>; |
| 243 | interrupt-controller; |
| 244 | #interrupt-cells = <3>; |
| 245 | |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 246 | ext_rgmii_pins: rgmii-pins { |
| 247 | pins = "PD0", "PD1", "PD2", "PD3", "PD4", |
| 248 | "PD5", "PD7", "PD8", "PD9", "PD10", |
| 249 | "PD11", "PD12", "PD13", "PD19", "PD20"; |
| 250 | function = "emac"; |
| 251 | drive-strength = <40>; |
| 252 | }; |
| 253 | |
| 254 | hdmi_pins: hdmi-pins { |
| 255 | pins = "PH8", "PH9", "PH10"; |
| 256 | function = "hdmi"; |
| 257 | }; |
| 258 | |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 259 | mmc0_pins: mmc0-pins { |
| 260 | pins = "PF0", "PF1", "PF2", "PF3", |
| 261 | "PF4", "PF5"; |
| 262 | function = "mmc0"; |
| 263 | drive-strength = <30>; |
| 264 | bias-pull-up; |
| 265 | }; |
| 266 | |
Clément Péron | 725089c | 2019-08-25 18:04:18 +0200 | [diff] [blame] | 267 | /* |
| 268 | * /omit-if-no-ref/ isn't supported by U-boot |
| 269 | * keep this comment to avoid bad sync with Linux |
| 270 | */ |
| 271 | mmc1_pins: mmc1-pins { |
| 272 | pins = "PG0", "PG1", "PG2", "PG3", |
| 273 | "PG4", "PG5"; |
| 274 | function = "mmc1"; |
| 275 | drive-strength = <30>; |
| 276 | bias-pull-up; |
| 277 | }; |
| 278 | |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 279 | mmc2_pins: mmc2-pins { |
| 280 | pins = "PC1", "PC4", "PC5", "PC6", |
| 281 | "PC7", "PC8", "PC9", "PC10", |
| 282 | "PC11", "PC12", "PC13", "PC14"; |
| 283 | function = "mmc2"; |
| 284 | drive-strength = <30>; |
| 285 | bias-pull-up; |
| 286 | }; |
| 287 | |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 288 | uart0_ph_pins: uart0-ph-pins { |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 289 | pins = "PH0", "PH1"; |
| 290 | function = "uart0"; |
| 291 | }; |
| 292 | }; |
| 293 | |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 294 | gic: interrupt-controller@3021000 { |
| 295 | compatible = "arm,gic-400"; |
| 296 | reg = <0x03021000 0x1000>, |
| 297 | <0x03022000 0x2000>, |
| 298 | <0x03024000 0x2000>, |
| 299 | <0x03026000 0x2000>; |
| 300 | interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 301 | interrupt-controller; |
| 302 | #interrupt-cells = <3>; |
| 303 | }; |
| 304 | |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 305 | mmc0: mmc@4020000 { |
| 306 | compatible = "allwinner,sun50i-h6-mmc", |
| 307 | "allwinner,sun50i-a64-mmc"; |
| 308 | reg = <0x04020000 0x1000>; |
| 309 | clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; |
| 310 | clock-names = "ahb", "mmc"; |
| 311 | resets = <&ccu RST_BUS_MMC0>; |
| 312 | reset-names = "ahb"; |
| 313 | interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 314 | pinctrl-names = "default"; |
| 315 | pinctrl-0 = <&mmc0_pins>; |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 316 | status = "disabled"; |
| 317 | #address-cells = <1>; |
| 318 | #size-cells = <0>; |
| 319 | }; |
| 320 | |
| 321 | mmc1: mmc@4021000 { |
| 322 | compatible = "allwinner,sun50i-h6-mmc", |
| 323 | "allwinner,sun50i-a64-mmc"; |
| 324 | reg = <0x04021000 0x1000>; |
| 325 | clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; |
| 326 | clock-names = "ahb", "mmc"; |
| 327 | resets = <&ccu RST_BUS_MMC1>; |
| 328 | reset-names = "ahb"; |
| 329 | interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
Clément Péron | 725089c | 2019-08-25 18:04:18 +0200 | [diff] [blame] | 330 | pinctrl-names = "default"; |
| 331 | pinctrl-0 = <&mmc1_pins>; |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 332 | status = "disabled"; |
| 333 | #address-cells = <1>; |
| 334 | #size-cells = <0>; |
| 335 | }; |
| 336 | |
| 337 | mmc2: mmc@4022000 { |
| 338 | compatible = "allwinner,sun50i-h6-emmc", |
| 339 | "allwinner,sun50i-a64-emmc"; |
| 340 | reg = <0x04022000 0x1000>; |
| 341 | clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; |
| 342 | clock-names = "ahb", "mmc"; |
| 343 | resets = <&ccu RST_BUS_MMC2>; |
| 344 | reset-names = "ahb"; |
| 345 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 346 | pinctrl-names = "default"; |
| 347 | pinctrl-0 = <&mmc2_pins>; |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 348 | status = "disabled"; |
| 349 | #address-cells = <1>; |
| 350 | #size-cells = <0>; |
| 351 | }; |
| 352 | |
| 353 | uart0: serial@5000000 { |
| 354 | compatible = "snps,dw-apb-uart"; |
| 355 | reg = <0x05000000 0x400>; |
| 356 | interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| 357 | reg-shift = <2>; |
| 358 | reg-io-width = <4>; |
| 359 | clocks = <&ccu CLK_BUS_UART0>; |
| 360 | resets = <&ccu RST_BUS_UART0>; |
| 361 | status = "disabled"; |
| 362 | }; |
| 363 | |
| 364 | uart1: serial@5000400 { |
| 365 | compatible = "snps,dw-apb-uart"; |
| 366 | reg = <0x05000400 0x400>; |
| 367 | interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 368 | reg-shift = <2>; |
| 369 | reg-io-width = <4>; |
| 370 | clocks = <&ccu CLK_BUS_UART1>; |
| 371 | resets = <&ccu RST_BUS_UART1>; |
| 372 | status = "disabled"; |
| 373 | }; |
| 374 | |
| 375 | uart2: serial@5000800 { |
| 376 | compatible = "snps,dw-apb-uart"; |
| 377 | reg = <0x05000800 0x400>; |
| 378 | interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 379 | reg-shift = <2>; |
| 380 | reg-io-width = <4>; |
| 381 | clocks = <&ccu CLK_BUS_UART2>; |
| 382 | resets = <&ccu RST_BUS_UART2>; |
| 383 | status = "disabled"; |
| 384 | }; |
| 385 | |
| 386 | uart3: serial@5000c00 { |
| 387 | compatible = "snps,dw-apb-uart"; |
| 388 | reg = <0x05000c00 0x400>; |
| 389 | interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 390 | reg-shift = <2>; |
| 391 | reg-io-width = <4>; |
| 392 | clocks = <&ccu CLK_BUS_UART3>; |
| 393 | resets = <&ccu RST_BUS_UART3>; |
| 394 | status = "disabled"; |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 395 | }; |
| 396 | |
| 397 | emac: ethernet@5020000 { |
| 398 | compatible = "allwinner,sun50i-h6-emac", |
| 399 | "allwinner,sun50i-a64-emac"; |
| 400 | syscon = <&syscon>; |
| 401 | reg = <0x05020000 0x10000>; |
| 402 | interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 403 | interrupt-names = "macirq"; |
| 404 | resets = <&ccu RST_BUS_EMAC>; |
| 405 | reset-names = "stmmaceth"; |
| 406 | clocks = <&ccu CLK_BUS_EMAC>; |
| 407 | clock-names = "stmmaceth"; |
| 408 | status = "disabled"; |
| 409 | |
| 410 | mdio: mdio { |
| 411 | compatible = "snps,dwmac-mdio"; |
| 412 | #address-cells = <1>; |
| 413 | #size-cells = <0>; |
| 414 | }; |
| 415 | }; |
| 416 | |
| 417 | usb2otg: usb@5100000 { |
| 418 | compatible = "allwinner,sun50i-h6-musb", |
| 419 | "allwinner,sun8i-a33-musb"; |
| 420 | reg = <0x05100000 0x0400>; |
| 421 | clocks = <&ccu CLK_BUS_OTG>; |
| 422 | resets = <&ccu RST_BUS_OTG>; |
| 423 | interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 424 | interrupt-names = "mc"; |
| 425 | phys = <&usb2phy 0>; |
| 426 | phy-names = "usb"; |
| 427 | extcon = <&usb2phy 0>; |
| 428 | status = "disabled"; |
| 429 | }; |
| 430 | |
| 431 | usb2phy: phy@5100400 { |
| 432 | compatible = "allwinner,sun50i-h6-usb-phy"; |
| 433 | reg = <0x05100400 0x24>, |
| 434 | <0x05101800 0x4>, |
| 435 | <0x05311800 0x4>; |
| 436 | reg-names = "phy_ctrl", |
| 437 | "pmu0", |
| 438 | "pmu3"; |
| 439 | clocks = <&ccu CLK_USB_PHY0>, |
| 440 | <&ccu CLK_USB_PHY3>; |
| 441 | clock-names = "usb0_phy", |
| 442 | "usb3_phy"; |
| 443 | resets = <&ccu RST_USB_PHY0>, |
| 444 | <&ccu RST_USB_PHY3>; |
| 445 | reset-names = "usb0_reset", |
| 446 | "usb3_reset"; |
| 447 | status = "disabled"; |
| 448 | #phy-cells = <1>; |
| 449 | }; |
| 450 | |
| 451 | ehci0: usb@5101000 { |
| 452 | compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; |
| 453 | reg = <0x05101000 0x100>; |
| 454 | interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 455 | clocks = <&ccu CLK_BUS_OHCI0>, |
| 456 | <&ccu CLK_BUS_EHCI0>, |
| 457 | <&ccu CLK_USB_OHCI0>; |
| 458 | resets = <&ccu RST_BUS_OHCI0>, |
| 459 | <&ccu RST_BUS_EHCI0>; |
| 460 | status = "disabled"; |
| 461 | }; |
| 462 | |
| 463 | ohci0: usb@5101400 { |
| 464 | compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; |
| 465 | reg = <0x05101400 0x100>; |
| 466 | interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 467 | clocks = <&ccu CLK_BUS_OHCI0>, |
| 468 | <&ccu CLK_USB_OHCI0>; |
| 469 | resets = <&ccu RST_BUS_OHCI0>; |
| 470 | status = "disabled"; |
| 471 | }; |
| 472 | |
| 473 | ehci3: usb@5311000 { |
| 474 | compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; |
| 475 | reg = <0x05311000 0x100>; |
| 476 | interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 477 | clocks = <&ccu CLK_BUS_OHCI3>, |
| 478 | <&ccu CLK_BUS_EHCI3>, |
| 479 | <&ccu CLK_USB_OHCI3>; |
| 480 | resets = <&ccu RST_BUS_OHCI3>, |
| 481 | <&ccu RST_BUS_EHCI3>; |
| 482 | phys = <&usb2phy 3>; |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 483 | status = "disabled"; |
| 484 | }; |
| 485 | |
| 486 | ohci3: usb@5311400 { |
| 487 | compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; |
| 488 | reg = <0x05311400 0x100>; |
| 489 | interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 490 | clocks = <&ccu CLK_BUS_OHCI3>, |
| 491 | <&ccu CLK_USB_OHCI3>; |
| 492 | resets = <&ccu RST_BUS_OHCI3>; |
| 493 | phys = <&usb2phy 3>; |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 494 | status = "disabled"; |
| 495 | }; |
| 496 | |
| 497 | hdmi: hdmi@6000000 { |
| 498 | compatible = "allwinner,sun50i-h6-dw-hdmi"; |
| 499 | reg = <0x06000000 0x10000>; |
| 500 | reg-io-width = <1>; |
| 501 | interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| 502 | clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, |
| 503 | <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>, |
| 504 | <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>; |
| 505 | clock-names = "iahb", "isfr", "tmds", "cec", "hdcp", |
| 506 | "hdcp-bus"; |
| 507 | resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; |
| 508 | reset-names = "ctrl", "hdcp"; |
| 509 | phys = <&hdmi_phy>; |
| 510 | phy-names = "hdmi-phy"; |
| 511 | pinctrl-names = "default"; |
| 512 | pinctrl-0 = <&hdmi_pins>; |
| 513 | status = "disabled"; |
| 514 | |
| 515 | ports { |
| 516 | #address-cells = <1>; |
| 517 | #size-cells = <0>; |
| 518 | |
| 519 | hdmi_in: port@0 { |
| 520 | reg = <0>; |
| 521 | |
| 522 | hdmi_in_tcon_top: endpoint { |
| 523 | remote-endpoint = <&tcon_top_hdmi_out_hdmi>; |
| 524 | }; |
| 525 | }; |
| 526 | |
| 527 | hdmi_out: port@1 { |
| 528 | reg = <1>; |
| 529 | }; |
| 530 | }; |
| 531 | }; |
| 532 | |
| 533 | hdmi_phy: hdmi-phy@6010000 { |
| 534 | compatible = "allwinner,sun50i-h6-hdmi-phy"; |
| 535 | reg = <0x06010000 0x10000>; |
| 536 | clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; |
| 537 | clock-names = "bus", "mod"; |
| 538 | resets = <&ccu RST_BUS_HDMI>; |
| 539 | reset-names = "phy"; |
| 540 | #phy-cells = <0>; |
| 541 | }; |
| 542 | |
| 543 | tcon_top: tcon-top@6510000 { |
| 544 | compatible = "allwinner,sun50i-h6-tcon-top"; |
| 545 | reg = <0x06510000 0x1000>; |
| 546 | clocks = <&ccu CLK_BUS_TCON_TOP>, |
| 547 | <&ccu CLK_TCON_TV0>; |
| 548 | clock-names = "bus", |
| 549 | "tcon-tv0"; |
| 550 | clock-output-names = "tcon-top-tv0"; |
| 551 | resets = <&ccu RST_BUS_TCON_TOP>; |
| 552 | reset-names = "rst"; |
| 553 | #clock-cells = <1>; |
| 554 | |
| 555 | ports { |
| 556 | #address-cells = <1>; |
| 557 | #size-cells = <0>; |
| 558 | |
| 559 | tcon_top_mixer0_in: port@0 { |
| 560 | #address-cells = <1>; |
| 561 | #size-cells = <0>; |
| 562 | reg = <0>; |
| 563 | |
| 564 | tcon_top_mixer0_in_mixer0: endpoint@0 { |
| 565 | reg = <0>; |
| 566 | remote-endpoint = <&mixer0_out_tcon_top_mixer0>; |
| 567 | }; |
| 568 | }; |
| 569 | |
| 570 | tcon_top_mixer0_out: port@1 { |
| 571 | #address-cells = <1>; |
| 572 | #size-cells = <0>; |
| 573 | reg = <1>; |
| 574 | |
| 575 | tcon_top_mixer0_out_tcon_tv: endpoint@2 { |
| 576 | reg = <2>; |
| 577 | remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>; |
| 578 | }; |
| 579 | }; |
| 580 | |
| 581 | tcon_top_hdmi_in: port@4 { |
| 582 | #address-cells = <1>; |
| 583 | #size-cells = <0>; |
| 584 | reg = <4>; |
| 585 | |
| 586 | tcon_top_hdmi_in_tcon_tv: endpoint@0 { |
| 587 | reg = <0>; |
| 588 | remote-endpoint = <&tcon_tv_out_tcon_top>; |
| 589 | }; |
| 590 | }; |
| 591 | |
| 592 | tcon_top_hdmi_out: port@5 { |
| 593 | reg = <5>; |
| 594 | |
| 595 | tcon_top_hdmi_out_hdmi: endpoint { |
| 596 | remote-endpoint = <&hdmi_in_tcon_top>; |
| 597 | }; |
| 598 | }; |
| 599 | }; |
| 600 | }; |
| 601 | |
| 602 | tcon_tv: lcd-controller@6515000 { |
| 603 | compatible = "allwinner,sun50i-h6-tcon-tv", |
| 604 | "allwinner,sun8i-r40-tcon-tv"; |
| 605 | reg = <0x06515000 0x1000>; |
| 606 | interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| 607 | clocks = <&ccu CLK_BUS_TCON_TV0>, |
| 608 | <&tcon_top CLK_TCON_TOP_TV0>; |
| 609 | clock-names = "ahb", |
| 610 | "tcon-ch1"; |
| 611 | resets = <&ccu RST_BUS_TCON_TV0>; |
| 612 | reset-names = "lcd"; |
| 613 | |
| 614 | ports { |
| 615 | #address-cells = <1>; |
| 616 | #size-cells = <0>; |
| 617 | |
| 618 | tcon_tv_in: port@0 { |
| 619 | reg = <0>; |
| 620 | |
| 621 | tcon_tv_in_tcon_top_mixer0: endpoint { |
| 622 | remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>; |
| 623 | }; |
| 624 | }; |
| 625 | |
| 626 | tcon_tv_out: port@1 { |
| 627 | #address-cells = <1>; |
| 628 | #size-cells = <0>; |
| 629 | reg = <1>; |
| 630 | |
| 631 | tcon_tv_out_tcon_top: endpoint@1 { |
| 632 | reg = <1>; |
| 633 | remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>; |
| 634 | }; |
| 635 | }; |
| 636 | }; |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 637 | }; |
| 638 | |
| 639 | r_ccu: clock@7010000 { |
| 640 | compatible = "allwinner,sun50i-h6-r-ccu"; |
| 641 | reg = <0x07010000 0x400>; |
| 642 | clocks = <&osc24M>, <&osc32k>, <&iosc>, |
| 643 | <&ccu CLK_PLL_PERIPH0>; |
| 644 | clock-names = "hosc", "losc", "iosc", "pll-periph"; |
| 645 | #clock-cells = <1>; |
| 646 | #reset-cells = <1>; |
| 647 | }; |
| 648 | |
Clément Péron | 725089c | 2019-08-25 18:04:18 +0200 | [diff] [blame] | 649 | r_watchdog: watchdog@7020400 { |
| 650 | compatible = "allwinner,sun50i-h6-wdt", |
| 651 | "allwinner,sun6i-a31-wdt"; |
| 652 | reg = <0x07020400 0x20>; |
| 653 | interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| 654 | }; |
| 655 | |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 656 | r_intc: interrupt-controller@7021000 { |
| 657 | compatible = "allwinner,sun50i-h6-r-intc", |
| 658 | "allwinner,sun6i-a31-r-intc"; |
| 659 | interrupt-controller; |
| 660 | #interrupt-cells = <2>; |
| 661 | reg = <0x07021000 0x400>; |
| 662 | interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 663 | }; |
| 664 | |
| 665 | r_pio: pinctrl@7022000 { |
| 666 | compatible = "allwinner,sun50i-h6-r-pinctrl"; |
| 667 | reg = <0x07022000 0x400>; |
| 668 | interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| 669 | <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| 670 | clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>; |
| 671 | clock-names = "apb", "hosc", "losc"; |
| 672 | gpio-controller; |
| 673 | #gpio-cells = <3>; |
| 674 | interrupt-controller; |
| 675 | #interrupt-cells = <3>; |
| 676 | |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 677 | r_i2c_pins: r-i2c-pins { |
Icenowy Zheng | 0c01b96 | 2018-07-21 16:20:31 +0800 | [diff] [blame] | 678 | pins = "PL0", "PL1"; |
| 679 | function = "s_i2c"; |
| 680 | }; |
| 681 | }; |
| 682 | |
| 683 | r_i2c: i2c@7081400 { |
| 684 | compatible = "allwinner,sun6i-a31-i2c"; |
| 685 | reg = <0x07081400 0x400>; |
| 686 | interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| 687 | clocks = <&r_ccu CLK_R_APB2_I2C>; |
| 688 | resets = <&r_ccu RST_R_APB2_I2C>; |
| 689 | pinctrl-names = "default"; |
| 690 | pinctrl-0 = <&r_i2c_pins>; |
| 691 | status = "disabled"; |
| 692 | #address-cells = <1>; |
| 693 | #size-cells = <0>; |
| 694 | }; |
| 695 | }; |
| 696 | }; |