| Tom Rini | 8b0c8a1 | 2018-05-06 18:27:01 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| Philipp Tomsich | 1620d35 | 2017-07-13 01:36:39 +0200 | [diff] [blame] | 2 | /* |
| 3 | * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH |
| Philipp Tomsich | 1620d35 | 2017-07-13 01:36:39 +0200 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | #include "rk3368.dtsi" |
| 8 | #include "rk3368-lion-u-boot.dtsi" |
| 9 | #include <dt-bindings/input/input.h> |
| 10 | |
| 11 | / { |
| 12 | model = "Theobroma Systems RK3368-uQ7 SoM"; |
| 13 | compatible = "tsd,rk3368-uq7", "tsd,lion", "rockchip,rk3368"; |
| 14 | |
| 15 | aliases { |
| 16 | mmc0 = &emmc; |
| 17 | mmc1 = &sdmmc; |
| 18 | }; |
| 19 | |
| 20 | memory@0 { |
| 21 | device_type = "memory"; |
| 22 | reg = <0x0 0x0 0x0 0x80000000>; |
| 23 | }; |
| 24 | |
| 25 | ext_gmac: gmac-clk { |
| 26 | compatible = "fixed-clock"; |
| 27 | clock-frequency = <125000000>; |
| 28 | clock-output-names = "ext_gmac"; |
| 29 | #clock-cells = <0>; |
| 30 | }; |
| 31 | |
| 32 | vcc_sys: vcc-sys-regulator { |
| 33 | compatible = "regulator-fixed"; |
| 34 | regulator-name = "vcc_sys"; |
| 35 | regulator-min-microvolt = <5000000>; |
| 36 | regulator-max-microvolt = <5000000>; |
| 37 | regulator-always-on; |
| 38 | regulator-boot-on; |
| 39 | }; |
| 40 | }; |
| 41 | |
| 42 | &uart0 { |
| 43 | status = "okay"; |
| 44 | }; |
| 45 | |
| 46 | &emmc { |
| 47 | status = "okay"; |
| 48 | bus-width = <8>; |
| 49 | cap-mmc-highspeed; |
| 50 | clock-frequency = <150000000>; |
| 51 | disable-wp; |
| 52 | keep-power-in-suspend; |
| 53 | non-removable; |
| 54 | num-slots = <1>; |
| 55 | vmmc-supply = <&vcc33_io>; |
| 56 | vqmmc-supply = <&vcc18_io>; |
| 57 | pinctrl-names = "default"; |
| 58 | pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; |
| 59 | }; |
| 60 | |
| 61 | &sdmmc { |
| 62 | status = "okay"; |
| 63 | }; |
| 64 | |
| 65 | &gmac { |
| 66 | status = "okay"; |
| 67 | phy-supply = <&vcc33_io>; |
| 68 | phy-mode = "rgmii"; |
| 69 | clock_in_out = "input"; |
| Klaus Goger | de02bc6 | 2017-11-06 23:02:54 +0100 | [diff] [blame] | 70 | snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; |
| Philipp Tomsich | 1620d35 | 2017-07-13 01:36:39 +0200 | [diff] [blame] | 71 | snps,reset-active-low; |
| 72 | snps,reset-delays-us = <2 10000 50000>; |
| 73 | assigned-clocks = <&cru SCLK_MAC>; |
| 74 | assigned-clock-parents = <&ext_gmac>; |
| 75 | pinctrl-names = "default"; |
| 76 | pinctrl-0 = <&rgmii_pins>; |
| 77 | tx_delay = <0x10>; |
| 78 | rx_delay = <0x10>; |
| 79 | }; |
| 80 | |
| 81 | &i2c0 { |
| 82 | status = "okay"; |
| 83 | |
| 84 | rk808: pmic@1b { |
| 85 | compatible = "rockchip,rk808"; |
| 86 | reg = <0x1b>; |
| 87 | interrupt-parent = <&gpio0>; |
| 88 | interrupts = <5 IRQ_TYPE_LEVEL_LOW>; |
| 89 | rockchip,system-power-controller; |
| 90 | vcc1-supply = <&vcc_sys>; |
| 91 | vcc2-supply = <&vcc_sys>; |
| 92 | vcc3-supply = <&vcc_sys>; |
| 93 | vcc4-supply = <&vcc_sys>; |
| 94 | vcc6-supply = <&vcc_sys>; |
| 95 | vcc7-supply = <&vcc_sys>; |
| 96 | vcc8-supply = <&vcc_sys>; |
| 97 | vcc9-supply = <&vcc_sys>; |
| 98 | vcc10-supply = <&vcc_sys>; |
| 99 | vcc11-supply = <&vcc_sys>; |
| 100 | vcc12-supply = <&vcc_sys>; |
| 101 | clock-output-names = "xin32k", "rk808-clkout2"; |
| 102 | #clock-cells = <1>; |
| 103 | |
| 104 | regulators { |
| 105 | vdd_cpu: DCDC_REG1 { |
| 106 | regulator-always-on; |
| 107 | regulator-boot-on; |
| 108 | regulator-min-microvolt = <700000>; |
| 109 | regulator-max-microvolt = <1500000>; |
| 110 | regulator-name = "vdd_cpu"; |
| 111 | }; |
| 112 | |
| 113 | vdd_log: DCDC_REG2 { |
| 114 | regulator-always-on; |
| 115 | regulator-boot-on; |
| 116 | regulator-min-microvolt = <700000>; |
| 117 | regulator-max-microvolt = <1500000>; |
| 118 | regulator-name = "vdd_log"; |
| 119 | }; |
| 120 | |
| 121 | vcc_ddr: DCDC_REG3 { |
| 122 | regulator-always-on; |
| 123 | regulator-boot-on; |
| 124 | regulator-name = "vcc_ddr"; |
| 125 | }; |
| 126 | |
| 127 | vcc33_io: DCDC_REG4 { |
| 128 | regulator-always-on; |
| 129 | regulator-boot-on; |
| 130 | regulator-min-microvolt = <3300000>; |
| 131 | regulator-max-microvolt = <3300000>; |
| 132 | regulator-name = "vcc33_io"; |
| 133 | }; |
| 134 | |
| 135 | vcc33_video: LDO_REG2 { |
| 136 | regulator-always-on; |
| 137 | regulator-boot-on; |
| 138 | regulator-min-microvolt = <3300000>; |
| 139 | regulator-max-microvolt = <3300000>; |
| 140 | regulator-name = "vcc33_video"; |
| 141 | }; |
| 142 | |
| 143 | vdd10_pll: LDO_REG3 { |
| 144 | regulator-always-on; |
| 145 | regulator-boot-on; |
| 146 | regulator-min-microvolt = <1000000>; |
| 147 | regulator-max-microvolt = <1000000>; |
| 148 | regulator-name = "vdd10_pll"; |
| 149 | }; |
| 150 | |
| 151 | vcc18_io: LDO_REG4 { |
| 152 | regulator-boot-on; |
| 153 | regulator-min-microvolt = <1800000>; |
| 154 | regulator-max-microvolt = <1800000>; |
| 155 | regulator-name = "vcc18_io"; |
| 156 | }; |
| 157 | |
| 158 | vdd10_video: LDO_REG6 { |
| 159 | regulator-always-on; |
| 160 | regulator-boot-on; |
| 161 | regulator-min-microvolt = <1000000>; |
| 162 | regulator-max-microvolt = <1000000>; |
| 163 | regulator-name = "vdd10_video"; |
| 164 | }; |
| 165 | |
| 166 | vcc18_video: LDO_REG8 { |
| 167 | regulator-always-on; |
| 168 | regulator-boot-on; |
| 169 | regulator-min-microvolt = <1800000>; |
| 170 | regulator-max-microvolt = <1800000>; |
| 171 | regulator-name = "vcc18_video"; |
| 172 | }; |
| 173 | }; |
| 174 | }; |
| 175 | }; |
| 176 | |
| 177 | &uart0 { |
| 178 | status = "okay"; |
| 179 | }; |
| 180 | |
| 181 | &spi1 { |
| 182 | status = "okay"; |
| 183 | |
| 184 | #address-cells = <1>; |
| 185 | #size-cells = <0>; |
| 186 | |
| 187 | spiflash: w25q32dw@0 { |
| Neil Armstrong | a009fa7 | 2019-02-10 10:16:20 +0000 | [diff] [blame] | 188 | compatible = "jedec,spi-nor"; |
| Philipp Tomsich | 1620d35 | 2017-07-13 01:36:39 +0200 | [diff] [blame] | 189 | reg = <0>; |
| 190 | spi-max-frequency = <49500000>; |
| 191 | spi-cpol; |
| 192 | spi-cpha; |
| 193 | }; |
| 194 | }; |