wdenk | b5bb139 | 2004-07-10 23:11:10 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2002 |
| 3 | * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net |
| 4 | * |
| 5 | * (C) Copyright 2002 |
| 6 | * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| 7 | * Marius Groeger <mgroeger@sysgo.de> |
| 8 | * |
| 9 | * Configuation settings for the CERF250 board. |
| 10 | * |
| 11 | * See file CREDITS for list of people who contributed to this |
| 12 | * project. |
| 13 | * |
| 14 | * This program is free software; you can redistribute it and/or |
| 15 | * modify it under the terms of the GNU General Public License as |
| 16 | * published by the Free Software Foundation; either version 2 of |
| 17 | * the License, or (at your option) any later version. |
| 18 | * |
| 19 | * This program is distributed in the hope that it will be useful, |
| 20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 22 | * GNU General Public License for more details. |
| 23 | * |
| 24 | * You should have received a copy of the GNU General Public License |
| 25 | * along with this program; if not, write to the Free Software |
| 26 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 27 | * MA 02111-1307 USA |
| 28 | */ |
| 29 | |
| 30 | #ifndef __CONFIG_H |
| 31 | #define __CONFIG_H |
| 32 | |
| 33 | /* |
wdenk | b5bb139 | 2004-07-10 23:11:10 +0000 | [diff] [blame] | 34 | * High Level Configuration Options |
| 35 | * (easy to change) |
| 36 | */ |
| 37 | #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ |
| 38 | #define CONFIG_CERF250 1 /* on Cerf PXA Board */ |
| 39 | #define BOARD_LATE_INIT 1 |
| 40 | #define CONFIG_BAUDRATE 38400 |
| 41 | |
| 42 | #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ |
| 43 | |
| 44 | /* |
| 45 | * Size of malloc() pool |
| 46 | */ |
| 47 | #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) |
| 48 | #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| 49 | |
| 50 | /* |
| 51 | * Hardware drivers |
| 52 | */ |
| 53 | #define CONFIG_DRIVER_SMC91111 |
| 54 | #define CONFIG_SMC91111_BASE 0x04000300 |
| 55 | #define CONFIG_SMC_USE_32_BIT |
| 56 | |
| 57 | /* |
| 58 | * select serial console configuration |
| 59 | */ |
| 60 | #define CONFIG_FFUART 1 /* we use FFUART on CERF PXA */ |
| 61 | |
| 62 | /* allow to overwrite serial and ethaddr */ |
| 63 | #define CONFIG_ENV_OVERWRITE |
wdenk | b5bb139 | 2004-07-10 23:11:10 +0000 | [diff] [blame] | 64 | |
Jon Loeliger | 37ec35e | 2007-07-04 22:31:56 -0500 | [diff] [blame] | 65 | /* |
Jon Loeliger | e54e77a | 2007-07-10 09:29:01 -0500 | [diff] [blame] | 66 | * BOOTP options |
| 67 | */ |
| 68 | #define CONFIG_BOOTP_BOOTFILESIZE |
| 69 | #define CONFIG_BOOTP_BOOTPATH |
| 70 | #define CONFIG_BOOTP_GATEWAY |
| 71 | #define CONFIG_BOOTP_HOSTNAME |
| 72 | |
| 73 | |
| 74 | /* |
Jon Loeliger | 37ec35e | 2007-07-04 22:31:56 -0500 | [diff] [blame] | 75 | * Command line configuration. |
| 76 | */ |
| 77 | #include <config_cmd_default.h> |
| 78 | |
wdenk | b5bb139 | 2004-07-10 23:11:10 +0000 | [diff] [blame] | 79 | |
| 80 | #define CONFIG_BOOTDELAY 3 |
| 81 | #define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2 |
| 82 | #define CONFIG_NETMASK 255.255.255.0 |
| 83 | #define CONFIG_IPADDR 192.168.0.5 |
| 84 | #define CONFIG_SERVERIP 192.168.0.2 |
| 85 | #define CONFIG_BOOTCOMMAND "bootm 0xC0000" |
| 86 | #define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400" |
| 87 | #define CONFIG_CMDLINE_TAG |
| 88 | |
Jon Loeliger | 37ec35e | 2007-07-04 22:31:56 -0500 | [diff] [blame] | 89 | #if defined(CONFIG_CMD_KGDB) |
wdenk | b5bb139 | 2004-07-10 23:11:10 +0000 | [diff] [blame] | 90 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| 91 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ |
| 92 | #endif |
| 93 | |
| 94 | /* |
| 95 | * Miscellaneous configurable options |
| 96 | */ |
| 97 | #define CFG_HUSH_PARSER 1 |
| 98 | #define CFG_PROMPT_HUSH_PS2 "> " |
| 99 | |
| 100 | #define CFG_LONGHELP /* undef to save memory */ |
| 101 | #ifdef CFG_HUSH_PARSER |
| 102 | #define CFG_PROMPT "uboot$ " /* Monitor Command Prompt */ |
| 103 | #else |
| 104 | #define CFG_PROMPT "=> " /* Monitor Command Prompt */ |
| 105 | #endif |
| 106 | #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| 107 | #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) |
| 108 | /* Print Buffer Size */ |
| 109 | #define CFG_MAXARGS 16 /* max number of command args */ |
| 110 | #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| 111 | #define CFG_DEVICE_NULLDEV 1 |
| 112 | |
| 113 | #define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ |
| 114 | #define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ |
| 115 | |
| 116 | #undef CFG_CLKS_IN_HZ |
| 117 | |
| 118 | #define CFG_LOAD_ADDR 0xa2000000 /* default load address */ |
| 119 | |
| 120 | #define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ |
| 121 | #define CFG_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */ |
| 122 | |
| 123 | #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| 124 | |
| 125 | |
| 126 | /* |
| 127 | * Stack sizes |
| 128 | * |
| 129 | * The stack sizes are set up in start.S using the settings below |
| 130 | */ |
| 131 | #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| 132 | #ifdef CONFIG_USE_IRQ |
| 133 | #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| 134 | #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| 135 | #endif |
| 136 | |
| 137 | /* |
| 138 | * Physical Memory Map |
| 139 | */ |
| 140 | #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ |
| 141 | #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ |
| 142 | #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ |
| 143 | #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ |
| 144 | #define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ |
| 145 | #define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ |
| 146 | #define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ |
| 147 | #define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ |
| 148 | #define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ |
| 149 | |
| 150 | #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ |
| 151 | #define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ |
| 152 | #define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ |
| 153 | #define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ |
| 154 | #define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ |
| 155 | |
| 156 | #define CFG_DRAM_BASE 0xa0000000 |
| 157 | #define CFG_DRAM_SIZE 0x04000000 |
| 158 | |
| 159 | #define CFG_FLASH_BASE PHYS_FLASH_1 |
| 160 | |
| 161 | /* |
| 162 | * GPIO settings |
| 163 | */ |
| 164 | |
| 165 | |
| 166 | #define CFG_GPSR0_VAL 0x00408030 |
| 167 | #define CFG_GPSR1_VAL 0x00BFA882 |
| 168 | #define CFG_GPSR2_VAL 0x0001C000 |
| 169 | #define CFG_GPCR0_VAL 0xC0031100 |
| 170 | #define CFG_GPCR1_VAL 0xFC400300 |
| 171 | #define CFG_GPCR2_VAL 0x00003FFF |
| 172 | #define CFG_GPDR0_VAL 0xC0439330 |
| 173 | #define CFG_GPDR1_VAL 0xFCFFAB82 |
| 174 | #define CFG_GPDR2_VAL 0x0001FFFF |
| 175 | #define CFG_GAFR0_L_VAL 0x80000000 |
| 176 | #define CFG_GAFR0_U_VAL 0xA5000010 |
| 177 | #define CFG_GAFR1_L_VAL 0x60008018 |
| 178 | #define CFG_GAFR1_U_VAL 0xAAA5AAAA |
| 179 | #define CFG_GAFR2_L_VAL 0xAAA0000A |
| 180 | #define CFG_GAFR2_U_VAL 0x00000002 |
| 181 | |
| 182 | #define CFG_PSSR_VAL 0x20 |
| 183 | |
| 184 | /* |
| 185 | * Memory settings |
| 186 | */ |
| 187 | #define CFG_MSC0_VAL 0x12447FF0 |
| 188 | #define CFG_MSC1_VAL 0x12BC5554 |
| 189 | #define CFG_MSC2_VAL 0x7FF97FF1 |
| 190 | #define CFG_MDCNFG_VAL 0x00001AC9 |
| 191 | #define CFG_MDREFR_VAL 0x03CDC017 |
| 192 | #define CFG_MDMRS_VAL 0x00000000 |
| 193 | |
| 194 | /* |
| 195 | * PCMCIA and CF Interfaces |
| 196 | */ |
| 197 | #define CFG_MECR_VAL 0x00000000 |
| 198 | #define CFG_MCMEM0_VAL 0x00010504 |
| 199 | #define CFG_MCMEM1_VAL 0x00010504 |
| 200 | #define CFG_MCATT0_VAL 0x00010504 |
| 201 | #define CFG_MCATT1_VAL 0x00010504 |
| 202 | #define CFG_MCIO0_VAL 0x00004715 |
| 203 | #define CFG_MCIO1_VAL 0x00004715 |
| 204 | |
| 205 | #define _LED 0x08000010 /*check this */ |
| 206 | #define LED_BLANK 0x08000040 |
| 207 | #define LED_GPIO 0x10 |
| 208 | |
| 209 | /* |
| 210 | * FLASH and environment organization |
| 211 | */ |
| 212 | #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| 213 | #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ |
| 214 | |
| 215 | /* timeout values are in ticks */ |
| 216 | #define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ |
| 217 | #define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ |
| 218 | |
| 219 | #define CFG_MONITOR_LEN 0x40000 /* 256 KiB */ |
| 220 | #define CFG_ENV_IS_IN_FLASH 1 |
| 221 | #define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) |
| 222 | #define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ |
| 223 | |
| 224 | |
| 225 | #endif /* __CONFIG_H */ |