Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / a611ffc8cc87834ab6e52e2f8c82df85140c9905 / . / arch / arm / dts / am335x-pdu001.dts
blob: bdf3b277def6e61afa7d8a2b0673087ae4e76759 [file] [log] [blame]
Felix Brack1ba8c9e2018-01-23 18:27:22 +0100[diff] [blame]1/*
2 * pdu001.dts
3 *
4 * EETS GmbH PDU001 board device tree file
5 *
6 * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
7 *
8 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
9 *
10 * SPDX-License-Identifier: GPL-2.0+
11 */
12
13/dts-v1/;
14
15#include "am33xx.dtsi"
16#include <dt-bindings/interrupt-controller/irq.h>
17#include <dt-bindings/leds/leds-pca9532.h>
18
19/ {
20 model = "EETS,PDU001";
21 compatible = "eets,pdu001", "ti,am33xx";
22
23 chosen {
24 stdout-path = &uart3;
25 };
26
27 cpus {
28 cpu@0 {
29 cpu0-supply = <&vdd1_reg>;
30 };
31 };
32
33 memory {
34 device_type = "memory";
35 reg = <0x80000000 0x10000000>; /* 256 MB */
36 };
37
38 vbat: fixedregulator@0 {
39 compatible = "regulator-fixed";
40 regulator-name = "vbat";
41 regulator-min-microvolt = <3600000>;
42 regulator-max-microvolt = <3600000>;
43 regulator-boot-on;
44 };
45
46 lis3_reg: fixedregulator@1 {
47 compatible = "regulator-fixed";
48 regulator-name = "lis3_reg";
49 regulator-boot-on;
50 };
51
52 panel {
53 compatible = "ti,tilcdc,panel";
54 status = "okay";
55 pinctrl-names = "default";
56 pinctrl-0 = <&lcd_pins_s0>;
57 panel-info {
58 ac-bias = <255>;
59 ac-bias-intrpt = <0>;
60 dma-burst-sz = <16>;
61 bpp = <16>;
62 fdd = <0x80>;
63 sync-edge = <0>;
64 sync-ctrl = <1>;
65 raster-order = <0>;
66 fifo-th = <0>;
67 };
68
69 display-timings {
70 240x320p16 {
71 clock-frequency = <6500000>;
72 hactive = <240>;
73 vactive = <320>;
74 hfront-porch = <6>;
75 hback-porch = <6>;
76 hsync-len = <1>;
77 vback-porch = <6>;
78 vfront-porch = <6>;
79 vsync-len = <1>;
80 hsync-active = <0>;
81 vsync-active = <0>;
82 pixelclk-active = <1>;
83 de-active = <0>;
84 };
85 };
86 };
87};
88
89&am33xx_pinmux {
90 pinctrl-names = "default";
91 pinctrl-0 = <&clkout2_pin>;
92
93 i2c0_pins: pinmux_i2c0_pins {
94 pinctrl-single,pins = <
95 AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
96 AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
97 >;
98 };
99
100 i2c1_pins: pinmux_i2c1_pins {
101 pinctrl-single,pins = <
102 AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
103 AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
104 >;
105 };
106
107 i2c2_pins: pinmux_i2c2_pins {
108 pinctrl-single,pins = <
109 AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_clk.i2c2_sda */
110 AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d0.i2c2_scl */
111 >;
112 };
113
114 spi1_pins: pinmux_spi1_pins {
115 pinctrl-single,pins = <
116 AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
117 AM33XX_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
118 AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
119 AM33XX_IOPAD(0x99C, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
120 >;
121 };
122
123 uart0_pins: pinmux_uart0_pins {
124 pinctrl-single,pins = <
125 AM33XX_IOPAD(0x96C, PIN_OUTPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */
126 AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
127 AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
128 >;
129 };
130
131 uart1_pins: pinmux_uart1_pins {
132 pinctrl-single,pins = <
133 AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
134 AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
135 >;
136 };
137
138 uart3_pins: pinmux_uart3_pins {
139 pinctrl-single,pins = <
140 AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE1) /* spi0_cs1.uart3_rxd */
141 AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
142 >;
143 };
144
145 clkout2_pin: pinmux_clkout2_pin {
146 pinctrl-single,pins = <
147 AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
148 >;
149 };
150
151 cpsw_default: cpsw_default {
152 pinctrl-single,pins = <
153 /* Port 1 (emac0) */
154 AM33XX_IOPAD(0x908, PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */
155 AM33XX_IOPAD(0x90C, PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */
156 AM33XX_IOPAD(0x910, PIN_INPUT | MUX_MODE0) /* mii1_rxer.mii1_rxer */
157 AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE0) /* mii1_txen.mii1_txen */
158 AM33XX_IOPAD(0x918, PIN_INPUT | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
159 AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
160 AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
161 AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
162 AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
163 AM33XX_IOPAD(0x92c, PIN_INPUT | MUX_MODE0) /* mii1_txclk.mii1_txclk */
164 AM33XX_IOPAD(0x930, PIN_INPUT | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
165 AM33XX_IOPAD(0x934, PIN_INPUT | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
166 AM33XX_IOPAD(0x938, PIN_INPUT | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
167 AM33XX_IOPAD(0x93c, PIN_INPUT | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
168 AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
169
170 /* Port 2 (emac1) */
171 AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* mii2_txen.gpmc_a0 */
172 AM33XX_IOPAD(0x844, PIN_INPUT | MUX_MODE1) /* mii2_rxdv.gpmc_a1 */
173 AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* mii2_txd3.gpmc_a2 */
174 AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* mii2_txd2.gpmc_a3 */
175 AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* mii2_txd1.gpmc_a4 */
176 AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* mii2_txd0.gpmc_a5 */
177 AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE1) /* mii2_txclk.gpmc_a6 */
178 AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE1) /* mii2_rxclk.gpmc_a7 */
179 AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE1) /* mii2_rxd3.gpmc_a8 */
180 AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE1) /* mii2_rxd2.gpmc_a9 */
181 AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE1) /* mii2_rxd1.gpmc_a10 */
182 AM33XX_IOPAD(0x86C, PIN_INPUT | MUX_MODE1) /* mii2_rxd0.gpmc_a11 */
183 AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE1) /* mii2_crs.gpmc_wait0 */
184 AM33XX_IOPAD(0x874, PIN_INPUT | MUX_MODE1) /* mii2_rxer.gpmc_wpn */
185 AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE1) /* mii2_col.gpmc_ben1 */
186 >;
187 };
188
189 davinci_mdio_default: davinci_mdio_default {
190 pinctrl-single,pins = <
191 AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
192 AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
193 >;
194 };
195
196 mmc1_pins: pinmux_mmc1_pins {
197 /* eMMC */
198 pinctrl-single,pins = <
199 AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
200 AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
201 AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
202 AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
203 AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
204 AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
205 >;
206 };
207
208 mmc2_pins: pinmux_mmc2_pins {
209 /* SD cardcage */
210 pinctrl-single,pins = <
211 AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
212 AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
213 AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
214 AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
215 AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
216 AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
217 /* card change signal for frontpanel SD cardcage */
218 AM33XX_IOPAD(0x890, PIN_INPUT | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
219 >;
220 };
221
222 lcd_pins_s0: lcd_pins_s0 {
223 pinctrl-single,pins = <
224 AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
225 AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
226 AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
227 AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
228 AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
229 AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
230 AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
231 AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
232 AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
233 AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
234 AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
235 AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
236 AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
237 AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
238 AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
239 AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
240 AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
241 AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
242 AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
243 AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
244 >;
245 };
246
247 dcan0_pins: pinmux_dcan0_pins {
248 pinctrl-single,pins = <
249 AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
250 AM33XX_IOPAD(0x97c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
251 >;
252 };
253};
254
255&uart0 {
256 pinctrl-names = "default";
257 pinctrl-0 = <&uart0_pins>;
258
259 rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
260 rs485-rts-active-high;
261 rs485-rts-delay = <0 0>;
262 linux,rs485-enabled-at-boot-time;
263
264 status = "okay";
265};
266
267&uart1 {
268 pinctrl-names = "default";
269 pinctrl-0 = <&uart1_pins>;
270
271 status = "okay";
272};
273
274&uart3 {
275 pinctrl-names = "default";
276 pinctrl-0 = <&uart3_pins>;
277
278 status = "okay";
279};
280
281&i2c0 {
282 pinctrl-names = "default";
283 pinctrl-0 = <&i2c0_pins>;
284
285 status = "okay";
286 clock-frequency = <400000>;
287
288 tps: tps@2d {
289 reg = <0x2d>;
290 };
291
292 m2_eeprom: m2_eeprom@50 {
293 compatible = "atmel,24c256";
294 reg = <0x50>;
295 status = "okay";
296 };
297};
298
299&i2c1 {
300 pinctrl-names = "default";
301 pinctrl-0 = <&i2c1_pins>;
302
303 status = "okay";
304 clock-frequency = <100000>;
305
306 board_24aa025e48: board_24aa025e48@50 {
307 compatible = "microchip,24aa025e48";
308 reg = <0x50>;
309 };
310
311 backplane_24aa025e48: backplane_24aa025e48@53 {
312 compatible = "microchip,24aa025e48";
313 reg = <0x53>;
314 };
315
316 pca9532: pca9532@60 {
317 compatible = "nxp,pca9532";
318 reg = <0x60>;
319 psc0 = <0x97>;
320 pwm0 = <0x80>;
321 psc1 = <0x97>;
322 pwm1 = <0x10>;
323
324 run.red@0 {
325 type = <PCA9532_TYPE_LED>;
326 };
327 run.green@1 {
328 type = <PCA9532_TYPE_LED>;
329 default-state = "on";
330 };
331 s2.red@2 {
332 type = <PCA9532_TYPE_LED>;
333 };
334 s2.green@3 {
335 type = <PCA9532_TYPE_LED>;
336 };
337 s1.yellow@4 {
338 type = <PCA9532_TYPE_LED>;
339 };
340 s1.green@5 {
341 type = <PCA9532_TYPE_LED>;
342 };
343 };
344
345 pca9530: pca9530@61 {
346 compatible = "nxp,pca9530";
347 reg = <0x61>;
348
349 tft-panel@0 {
350 type = <PCA9532_TYPE_LED>;
351 linux,default-trigger = "backlight";
352 default-state = "on";
353 };
354 };
355
356 mcp79400: mcp79400@6f {
357 compatible = "microchip,mcp7940x";
358 reg = <0x6f>;
359 };
360};
361
362&i2c2 {
363 pinctrl-names = "default";
364 pinctrl-0 = <&i2c2_pins>;
365
366 status = "okay";
367 clock-frequency = <100000>;
368};
369
370&spi1 {
371 pinctrl-names = "default";
372 pinctrl-0 = <&spi1_pins>;
373 ti,pindir-d0-out-d1-in;
374 status = "okay";
375
376 cfaf240320a032t {
377 compatible = "orise,otm3225a";
378 reg = <0>;
379 spi-max-frequency = <1000000>;
380 // SPI mode 3
381 spi-cpol;
382 spi-cpha;
383 status = "okay";
384 };
385};
386
387&usb {
388 status = "okay";
389};
390
391&usb_ctrl_mod {
392 status = "okay";
393};
394
395&usb0_phy {
396 status = "okay";
397};
398
399&usb1_phy {
400 status = "okay";
401};
402
403&usb0 {
404 status = "okay";
405};
406
407&usb1 {
408 status = "okay";
409};
410
411&cppi41dma {
412 status = "okay";
413};
414
415/*
416 * Disable soc's rtc as we have no VBAT for it. This makes the board
417 * rtc (Microchip MCP79400) the default rtc device 'rtc0'.
418 */
419&rtc {
420 status = "disabled";
421};
422
423&lcdc {
424 status = "okay";
425};
426
427&elm {
428 status = "okay";
429};
430
431#include "tps65910.dtsi"
432
433&tps {
434 vcc1-supply = <&vbat>;
435 vcc2-supply = <&vbat>;
436 vcc3-supply = <&vbat>;
437 vcc4-supply = <&vbat>;
438 vcc5-supply = <&vbat>;
439 vcc6-supply = <&vbat>;
440 vcc7-supply = <&vbat>;
441 vccio-supply = <&vbat>;
442
443 regulators {
444 vrtc_reg: regulator@0 {
445 regulator-name = "ldo_vrtc";
446 regulator-always-on;
447 };
448
449 vio_reg: regulator@1 {
450 regulator-name = "buck_vdd_ddr";
451 regulator-always-on;
452 };
453
454 vdd1_reg: regulator@2 {
455 /* VDD_MPU voltage limits */
456 regulator-name = "buck_vdd_mpu";
457 regulator-min-microvolt = <912500>;
458 regulator-max-microvolt = <1312500>;
459 regulator-boot-on;
460 regulator-always-on;
461 };
462
463 vdd2_reg: regulator@3 {
464 /* VDD_CORE voltage limits */
465 regulator-name = "buck_vdd_core";
466 regulator-min-microvolt = <912500>;
467 regulator-max-microvolt = <1150000>;
468 regulator-boot-on;
469 regulator-always-on;
470 };
471
472 vdd3_reg: regulator@4 {
473 regulator-name = "boost_res";
474 regulator-always-on;
475 };
476
477 vdig1_reg: regulator@5 {
478 regulator-name = "ldo_vdig1";
479 regulator-always-on;
480 };
481
482 vdig2_reg: regulator@6 {
483 regulator-name = "ldo_vdig2";
484 regulator-always-on;
485 };
486
487 vpll_reg: regulator@7 {
488 regulator-name = "ldo_vpll";
489 regulator-always-on;
490 };
491
492 vdac_reg: regulator@8 {
493 regulator-name = "ldo_vdac";
494 regulator-always-on;
495 };
496
497 vaux1_reg: regulator@9 {
498 regulator-name = "ldo_vaux1";
499 regulator-always-on;
500 };
501
502 vaux2_reg: regulator@10 {
503 regulator-name = "ldo_vaux2";
504 regulator-always-on;
505 };
506
507 vaux33_reg: regulator@11 {
508 regulator-name = "ldo_vaux33";
509 regulator-always-on;
510 };
511
512 vmmc_reg: regulator@12 {
513 regulator-name = "ldo_vmmc";
514 regulator-min-microvolt = <1800000>;
515 regulator-max-microvolt = <3300000>;
516 regulator-always-on;
517 };
518
519 vbb_reg: regulator@13 {
520 regulator-name = "bat_vbb";
521 };
522 };
523};
524
525&mac {
526 pinctrl-names = "default";
527 pinctrl-0 = <&cpsw_default>;
528 dual_emac; /* no switch, two distinct MACs */
529 status = "okay";
530};
531
532&davinci_mdio {
533 pinctrl-names = "default";
534 pinctrl-0 = <&davinci_mdio_default>;
535 status = "okay";
536};
537
538&cpsw_emac0 {
539 phy_id = <&davinci_mdio>, <0>;
540 phy-mode = "mii";
541 dual_emac_res_vlan = <1>;
542};
543
544&cpsw_emac1 {
545 phy_id = <&davinci_mdio>, <1>;
546 phy-mode = "mii";
547 dual_emac_res_vlan = <2>;
548};
549
550&tscadc {
551 status = "okay";
552 tsc {
553 ti,wires = <4>;
554 ti,x-plate-resistance = <200>;
555 ti,coordinate-readouts = <5>;
556 ti,wire-config = <0x01 0x10 0x22 0x33>;
557 ti,charge-delay = <0x400>;
558 };
559
560 adc {
561 ti,adc-channels = <4 5 6 7>;
562 };
563};
564
565&mmc1 {
566 status = "okay";
567 vmmc-supply = <&vmmc_reg>;
568 bus-width = <4>;
569 pinctrl-names = "default";
570 pinctrl-0 = <&mmc1_pins>;
571 non-removable;
572};
573
574&mmc2 {
575 status = "okay";
576 vmmc-supply = <&vmmc_reg>;
577 bus-width = <4>;
578 pinctrl-names = "default";
579 pinctrl-0 = <&mmc2_pins>;
580 cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
581};
582
583&sham {
584 status = "okay";
585};
586
587&aes {
588 status = "okay";
589};
590
591&dcan0 {
592 status = "okay";
593 pinctrl-names = "default";
594 pinctrl-0 = <&dcan0_pins>;
595};