Nathan Rossi | ce1771e | 2015-11-17 22:56:56 +1000 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2015 Nathan Rossi <nathan@nathanrossi.com> |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | * |
| 6 | * The following Boot Header format/structures and values are defined in the |
| 7 | * following documents: |
| 8 | * * Xilinx Zynq-7000 Technical Reference Manual (Section 6.3) |
| 9 | * * Xilinx Zynq-7000 Software Developers Guide (Appendix A.7 and A.8) |
| 10 | * |
| 11 | * Expected Header Size = 0x8C0 |
| 12 | * Forced as 'little' endian, 32-bit words |
| 13 | * |
| 14 | * 0x 0 - Interrupt Table (8 words) |
| 15 | * ... (Default value = 0xeafffffe) |
| 16 | * 0x 1f |
| 17 | * 0x 20 - Width Detection |
| 18 | * * DEFAULT_WIDTHDETECTION 0xaa995566 |
| 19 | * 0x 24 - Image Identifier |
| 20 | * * DEFAULT_IMAGEIDENTIFIER 0x584c4e58 |
| 21 | * 0x 28 - Encryption |
| 22 | * * 0x00000000 - None |
| 23 | * * 0xa5c3c5a3 - eFuse |
| 24 | * * 0x3a5c3c5a - bbRam |
| 25 | * 0x 2C - User Field |
| 26 | * 0x 30 - Image Offset |
| 27 | * 0x 34 - Image Size |
| 28 | * 0x 38 - Reserved (0x00000000) (according to spec) |
| 29 | * * FSBL defines this field for Image Destination Address. |
| 30 | * 0x 3C - Image Load |
| 31 | * 0x 40 - Image Stored Size |
| 32 | * 0x 44 - Reserved (0x00000000) (according to spec) |
| 33 | * * FSBL defines this field for QSPI configuration Data. |
| 34 | * 0x 48 - Checksum |
| 35 | * 0x 4c - Unused (21 words) |
| 36 | * ... |
| 37 | * 0x 9c |
| 38 | * 0x a0 - Register Initialization, 256 Address and Data word pairs |
| 39 | * * List is terminated with an address of 0xffffffff or |
| 40 | * ... * at the max number of entries |
| 41 | * 0x89c |
| 42 | * 0x8a0 - Unused (8 words) |
| 43 | * ... |
| 44 | * 0x8bf |
| 45 | * 0x8c0 - Data/Image starts here or above |
| 46 | */ |
| 47 | |
| 48 | #include "imagetool.h" |
| 49 | #include "mkimage.h" |
| 50 | #include <image.h> |
| 51 | |
| 52 | #define HEADER_INTERRUPT_DEFAULT (cpu_to_le32(0xeafffffe)) |
| 53 | #define HEADER_REGINIT_NULL (cpu_to_le32(0xffffffff)) |
| 54 | #define HEADER_WIDTHDETECTION (cpu_to_le32(0xaa995566)) |
| 55 | #define HEADER_IMAGEIDENTIFIER (cpu_to_le32(0x584c4e58)) |
| 56 | |
| 57 | enum { |
| 58 | ENCRYPTION_EFUSE = 0xa5c3c5a3, |
| 59 | ENCRYPTION_BBRAM = 0x3a5c3c5a, |
| 60 | ENCRYPTION_NONE = 0x0, |
| 61 | }; |
| 62 | |
| 63 | struct zynq_reginit { |
| 64 | uint32_t address; |
| 65 | uint32_t data; |
| 66 | }; |
| 67 | |
| 68 | #define HEADER_INTERRUPT_VECTORS 8 |
| 69 | #define HEADER_REGINITS 256 |
| 70 | |
| 71 | struct zynq_header { |
| 72 | uint32_t interrupt_vectors[HEADER_INTERRUPT_VECTORS]; /* 0x0 */ |
| 73 | uint32_t width_detection; /* 0x20 */ |
| 74 | uint32_t image_identifier; /* 0x24 */ |
| 75 | uint32_t encryption; /* 0x28 */ |
| 76 | uint32_t user_field; /* 0x2c */ |
| 77 | uint32_t image_offset; /* 0x30 */ |
| 78 | uint32_t image_size; /* 0x34 */ |
| 79 | uint32_t __reserved1; /* 0x38 */ |
| 80 | uint32_t image_load; /* 0x3c */ |
| 81 | uint32_t image_stored_size; /* 0x40 */ |
| 82 | uint32_t __reserved2; /* 0x44 */ |
| 83 | uint32_t checksum; /* 0x48 */ |
| 84 | uint32_t __reserved3[21]; /* 0x4c */ |
| 85 | struct zynq_reginit register_init[HEADER_REGINITS]; /* 0xa0 */ |
| 86 | uint32_t __reserved4[8]; /* 0x8a0 */ |
| 87 | }; |
| 88 | |
| 89 | static struct zynq_header zynqimage_header; |
| 90 | |
| 91 | static uint32_t zynqimage_checksum(struct zynq_header *ptr) |
| 92 | { |
| 93 | uint32_t checksum = 0; |
| 94 | |
| 95 | if (ptr == NULL) |
| 96 | return 0; |
| 97 | |
| 98 | checksum += le32_to_cpu(ptr->width_detection); |
| 99 | checksum += le32_to_cpu(ptr->image_identifier); |
| 100 | checksum += le32_to_cpu(ptr->encryption); |
| 101 | checksum += le32_to_cpu(ptr->user_field); |
| 102 | checksum += le32_to_cpu(ptr->image_offset); |
| 103 | checksum += le32_to_cpu(ptr->image_size); |
| 104 | checksum += le32_to_cpu(ptr->__reserved1); |
| 105 | checksum += le32_to_cpu(ptr->image_load); |
| 106 | checksum += le32_to_cpu(ptr->image_stored_size); |
| 107 | checksum += le32_to_cpu(ptr->__reserved2); |
| 108 | checksum = ~checksum; |
| 109 | |
| 110 | return cpu_to_le32(checksum); |
| 111 | } |
| 112 | |
| 113 | static void zynqimage_default_header(struct zynq_header *ptr) |
| 114 | { |
| 115 | int i; |
| 116 | |
| 117 | if (ptr == NULL) |
| 118 | return; |
| 119 | |
| 120 | ptr->width_detection = HEADER_WIDTHDETECTION; |
| 121 | ptr->image_identifier = HEADER_IMAGEIDENTIFIER; |
| 122 | ptr->encryption = cpu_to_le32(ENCRYPTION_NONE); |
| 123 | |
| 124 | /* Setup not-supported/constant/reserved fields */ |
| 125 | for (i = 0; i < HEADER_INTERRUPT_VECTORS; i++) |
| 126 | ptr->interrupt_vectors[i] = HEADER_INTERRUPT_DEFAULT; |
| 127 | |
| 128 | for (i = 0; i < HEADER_REGINITS; i++) { |
| 129 | ptr->register_init[i].address = HEADER_REGINIT_NULL; |
| 130 | ptr->register_init[i].data = HEADER_REGINIT_NULL; |
| 131 | } |
| 132 | |
| 133 | /* |
| 134 | * Certain reserved fields are required to be set to 0, ensure they are |
| 135 | * set as such. |
| 136 | */ |
| 137 | ptr->__reserved1 = 0x0; |
| 138 | ptr->__reserved2 = 0x0; |
| 139 | } |
| 140 | |
| 141 | /* mkimage glue functions */ |
| 142 | static int zynqimage_verify_header(unsigned char *ptr, int image_size, |
| 143 | struct image_tool_params *params) |
| 144 | { |
| 145 | struct zynq_header *zynqhdr = (struct zynq_header *)ptr; |
| 146 | |
| 147 | if (image_size < sizeof(struct zynq_header)) |
| 148 | return -1; |
| 149 | |
| 150 | if (zynqhdr->width_detection != HEADER_WIDTHDETECTION) |
| 151 | return -1; |
| 152 | if (zynqhdr->image_identifier != HEADER_IMAGEIDENTIFIER) |
| 153 | return -1; |
| 154 | |
| 155 | if (zynqimage_checksum(zynqhdr) != zynqhdr->checksum) |
| 156 | return -1; |
| 157 | |
| 158 | return 0; |
| 159 | } |
| 160 | |
| 161 | static void zynqimage_print_header(const void *ptr) |
| 162 | { |
| 163 | struct zynq_header *zynqhdr = (struct zynq_header *)ptr; |
| 164 | int i; |
| 165 | |
| 166 | printf("Image Type : Xilinx Zynq Boot Image support\n"); |
| 167 | printf("Image Offset : 0x%08x\n", le32_to_cpu(zynqhdr->image_offset)); |
| 168 | printf("Image Size : %lu bytes (%lu bytes packed)\n", |
| 169 | (unsigned long)le32_to_cpu(zynqhdr->image_size), |
| 170 | (unsigned long)le32_to_cpu(zynqhdr->image_stored_size)); |
| 171 | printf("Image Load : 0x%08x\n", le32_to_cpu(zynqhdr->image_load)); |
| 172 | printf("User Field : 0x%08x\n", le32_to_cpu(zynqhdr->user_field)); |
| 173 | printf("Checksum : 0x%08x\n", le32_to_cpu(zynqhdr->checksum)); |
| 174 | |
| 175 | for (i = 0; i < HEADER_INTERRUPT_VECTORS; i++) { |
| 176 | if (zynqhdr->interrupt_vectors[i] == HEADER_INTERRUPT_DEFAULT) |
| 177 | continue; |
| 178 | |
| 179 | printf("Modified Interrupt Vector Address [%d]: 0x%08x\n", i, |
| 180 | le32_to_cpu(zynqhdr->interrupt_vectors[i])); |
| 181 | } |
| 182 | |
| 183 | for (i = 0; i < HEADER_REGINITS; i++) { |
| 184 | if (zynqhdr->register_init[i].address == HEADER_REGINIT_NULL) |
| 185 | break; |
| 186 | |
| 187 | if (i == 0) |
| 188 | printf("Custom Register Initialization:\n"); |
| 189 | |
| 190 | printf(" @ 0x%08x -> 0x%08x\n", |
| 191 | le32_to_cpu(zynqhdr->register_init[i].address), |
| 192 | le32_to_cpu(zynqhdr->register_init[i].data)); |
| 193 | } |
| 194 | } |
| 195 | |
| 196 | static int zynqimage_check_params(struct image_tool_params *params) |
| 197 | { |
| 198 | if (!params) |
| 199 | return 0; |
| 200 | |
| 201 | if (params->addr != 0x0) { |
| 202 | fprintf(stderr, "Error: Load Address cannot be specified.\n"); |
| 203 | return -1; |
| 204 | } |
| 205 | |
| 206 | /* |
| 207 | * If the entry point is specified ensure it is 64 byte aligned. |
| 208 | */ |
| 209 | if (params->eflag && (params->ep % 64 != 0)) { |
| 210 | fprintf(stderr, |
| 211 | "Error: Entry Point must be aligned to a 64-byte boundary.\n"); |
| 212 | return -1; |
| 213 | } |
| 214 | |
Nathan Rossi | d54f0e7 | 2015-12-09 00:44:43 +1000 | [diff] [blame] | 215 | return !(params->lflag || params->dflag); |
Nathan Rossi | ce1771e | 2015-11-17 22:56:56 +1000 | [diff] [blame] | 216 | } |
| 217 | |
| 218 | static int zynqimage_check_image_types(uint8_t type) |
| 219 | { |
| 220 | if (type == IH_TYPE_ZYNQIMAGE) |
| 221 | return EXIT_SUCCESS; |
| 222 | return EXIT_FAILURE; |
| 223 | } |
| 224 | |
| 225 | static void zynqimage_set_header(void *ptr, struct stat *sbuf, int ifd, |
| 226 | struct image_tool_params *params) |
| 227 | { |
| 228 | struct zynq_header *zynqhdr = (struct zynq_header *)ptr; |
| 229 | zynqimage_default_header(zynqhdr); |
| 230 | |
| 231 | /* place image directly after header */ |
| 232 | zynqhdr->image_offset = |
| 233 | cpu_to_le32((uint32_t)sizeof(struct zynq_header)); |
| 234 | zynqhdr->image_size = cpu_to_le32((uint32_t)sbuf->st_size); |
| 235 | zynqhdr->image_stored_size = zynqhdr->image_size; |
| 236 | zynqhdr->image_load = 0x0; |
| 237 | if (params->eflag) |
| 238 | zynqhdr->image_load = cpu_to_le32((uint32_t)params->ep); |
| 239 | |
| 240 | zynqhdr->checksum = zynqimage_checksum(zynqhdr); |
| 241 | } |
| 242 | |
| 243 | U_BOOT_IMAGE_TYPE( |
| 244 | zynqimage, |
| 245 | "Xilinx Zynq Boot Image support", |
| 246 | sizeof(struct zynq_header), |
| 247 | (void *)&zynqimage_header, |
| 248 | zynqimage_check_params, |
| 249 | zynqimage_verify_header, |
| 250 | zynqimage_print_header, |
| 251 | zynqimage_set_header, |
| 252 | NULL, |
| 253 | zynqimage_check_image_types, |
| 254 | NULL, |
| 255 | NULL |
| 256 | ); |