Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 1 | /* |
| 2 | * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC |
| 3 | * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, |
| 4 | * AT91SAM9X25, AT91SAM9X35 SoC |
| 5 | * |
| 6 | * Copyright (C) 2012 Atmel, |
| 7 | * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> |
| 8 | * |
| 9 | * Licensed under GPLv2 or later. |
| 10 | */ |
| 11 | |
| 12 | #include "skeleton.dtsi" |
| 13 | #include <dt-bindings/dma/at91.h> |
| 14 | #include <dt-bindings/pinctrl/at91.h> |
| 15 | #include <dt-bindings/interrupt-controller/irq.h> |
| 16 | #include <dt-bindings/gpio/gpio.h> |
| 17 | #include <dt-bindings/clock/at91.h> |
| 18 | |
| 19 | / { |
| 20 | model = "Atmel AT91SAM9x5 family SoC"; |
| 21 | compatible = "atmel,at91sam9x5"; |
| 22 | interrupt-parent = <&aic>; |
| 23 | |
| 24 | aliases { |
| 25 | serial0 = &dbgu; |
| 26 | serial1 = &usart0; |
| 27 | serial2 = &usart1; |
| 28 | serial3 = &usart2; |
| 29 | gpio0 = &pioA; |
| 30 | gpio1 = &pioB; |
| 31 | gpio2 = &pioC; |
| 32 | gpio3 = &pioD; |
| 33 | tcb0 = &tcb0; |
| 34 | tcb1 = &tcb1; |
| 35 | i2c0 = &i2c0; |
| 36 | i2c1 = &i2c1; |
| 37 | i2c2 = &i2c2; |
| 38 | ssc0 = &ssc0; |
| 39 | pwm0 = &pwm0; |
| 40 | spi0 = &spi0; |
| 41 | }; |
| 42 | |
| 43 | cpus { |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 44 | cpu { |
| 45 | compatible = "arm,arm926ej-s"; |
| 46 | device_type = "cpu"; |
| 47 | }; |
| 48 | }; |
| 49 | |
| 50 | memory { |
| 51 | reg = <0x20000000 0x10000000>; |
| 52 | }; |
| 53 | |
| 54 | clocks { |
| 55 | slow_xtal: slow_xtal { |
| 56 | compatible = "fixed-clock"; |
| 57 | #clock-cells = <0>; |
| 58 | clock-frequency = <0>; |
| 59 | }; |
| 60 | |
| 61 | main_xtal: main_xtal { |
| 62 | compatible = "fixed-clock"; |
| 63 | #clock-cells = <0>; |
| 64 | clock-frequency = <0>; |
| 65 | }; |
| 66 | |
| 67 | adc_op_clk: adc_op_clk{ |
| 68 | compatible = "fixed-clock"; |
| 69 | #clock-cells = <0>; |
| 70 | clock-frequency = <1000000>; |
| 71 | }; |
| 72 | }; |
| 73 | |
| 74 | sram: sram@00300000 { |
| 75 | compatible = "mmio-sram"; |
| 76 | reg = <0x00300000 0x8000>; |
| 77 | }; |
| 78 | |
| 79 | ahb { |
| 80 | compatible = "simple-bus"; |
| 81 | #address-cells = <1>; |
| 82 | #size-cells = <1>; |
| 83 | ranges; |
Simon Glass | d3a98cb | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 84 | bootph-all; |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 85 | |
| 86 | apb { |
| 87 | compatible = "simple-bus"; |
| 88 | #address-cells = <1>; |
| 89 | #size-cells = <1>; |
| 90 | ranges; |
Simon Glass | d3a98cb | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 91 | bootph-all; |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 92 | |
| 93 | aic: interrupt-controller@fffff000 { |
| 94 | #interrupt-cells = <3>; |
| 95 | compatible = "atmel,at91rm9200-aic"; |
| 96 | interrupt-controller; |
| 97 | reg = <0xfffff000 0x200>; |
| 98 | atmel,external-irqs = <31>; |
| 99 | }; |
| 100 | |
| 101 | ramc0: ramc@ffffe800 { |
| 102 | compatible = "atmel,at91sam9g45-ddramc"; |
| 103 | reg = <0xffffe800 0x200>; |
| 104 | clocks = <&ddrck>; |
| 105 | clock-names = "ddrck"; |
| 106 | }; |
| 107 | |
| 108 | pmc: pmc@fffffc00 { |
| 109 | compatible = "atmel,at91sam9x5-pmc", "syscon"; |
| 110 | reg = <0xfffffc00 0x200>; |
| 111 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 112 | interrupt-controller; |
| 113 | #address-cells = <1>; |
| 114 | #size-cells = <0>; |
| 115 | #interrupt-cells = <1>; |
Simon Glass | d3a98cb | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 116 | bootph-all; |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 117 | |
| 118 | main_rc_osc: main_rc_osc { |
| 119 | compatible = "atmel,at91sam9x5-clk-main-rc-osc"; |
| 120 | #clock-cells = <0>; |
| 121 | interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; |
| 122 | clock-frequency = <12000000>; |
| 123 | clock-accuracy = <50000000>; |
| 124 | }; |
| 125 | |
| 126 | main_osc: main_osc { |
| 127 | compatible = "atmel,at91rm9200-clk-main-osc"; |
| 128 | #clock-cells = <0>; |
| 129 | interrupts-extended = <&pmc AT91_PMC_MOSCS>; |
| 130 | clocks = <&main_xtal>; |
| 131 | }; |
| 132 | |
| 133 | main: mainck { |
| 134 | compatible = "atmel,at91sam9x5-clk-main"; |
| 135 | #clock-cells = <0>; |
| 136 | interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; |
| 137 | clocks = <&main_rc_osc>, <&main_osc>; |
| 138 | }; |
| 139 | |
| 140 | plla: pllack@0 { |
| 141 | compatible = "atmel,at91rm9200-clk-pll"; |
| 142 | #clock-cells = <0>; |
| 143 | interrupts-extended = <&pmc AT91_PMC_LOCKA>; |
| 144 | clocks = <&main>; |
| 145 | reg = <0>; |
| 146 | atmel,clk-input-range = <2000000 32000000>; |
| 147 | #atmel,pll-clk-output-range-cells = <4>; |
| 148 | atmel,pll-clk-output-ranges = <745000000 800000000 0 0 |
| 149 | 695000000 750000000 1 0 |
| 150 | 645000000 700000000 2 0 |
| 151 | 595000000 650000000 3 0 |
| 152 | 545000000 600000000 0 1 |
| 153 | 495000000 555000000 1 1 |
| 154 | 445000000 500000000 2 1 |
| 155 | 400000000 450000000 3 1>; |
| 156 | }; |
| 157 | |
| 158 | plladiv: plladivck { |
| 159 | compatible = "atmel,at91sam9x5-clk-plldiv"; |
| 160 | #clock-cells = <0>; |
| 161 | clocks = <&plla>; |
| 162 | }; |
| 163 | |
| 164 | utmi: utmick { |
| 165 | compatible = "atmel,at91sam9x5-clk-utmi"; |
| 166 | #clock-cells = <0>; |
| 167 | interrupts-extended = <&pmc AT91_PMC_LOCKU>; |
| 168 | clocks = <&main>; |
| 169 | }; |
| 170 | |
| 171 | mck: masterck { |
| 172 | compatible = "atmel,at91sam9x5-clk-master"; |
| 173 | #clock-cells = <0>; |
| 174 | interrupts-extended = <&pmc AT91_PMC_MCKRDY>; |
| 175 | clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; |
| 176 | atmel,clk-output-range = <0 133333333>; |
| 177 | atmel,clk-divisors = <1 2 4 3>; |
| 178 | atmel,master-clk-have-div3-pres; |
Simon Glass | d3a98cb | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 179 | bootph-all; |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 180 | |
| 181 | }; |
| 182 | |
| 183 | usb: usbck { |
| 184 | compatible = "atmel,at91sam9x5-clk-usb"; |
| 185 | #clock-cells = <0>; |
| 186 | clocks = <&plladiv>, <&utmi>; |
| 187 | }; |
| 188 | |
| 189 | prog: progck { |
| 190 | compatible = "atmel,at91sam9x5-clk-programmable"; |
| 191 | #address-cells = <1>; |
| 192 | #size-cells = <0>; |
| 193 | interrupt-parent = <&pmc>; |
| 194 | clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; |
| 195 | |
| 196 | prog0: prog@0 { |
| 197 | #clock-cells = <0>; |
| 198 | reg = <0>; |
| 199 | interrupts = <AT91_PMC_PCKRDY(0)>; |
| 200 | }; |
| 201 | |
| 202 | prog1: prog@1 { |
| 203 | #clock-cells = <0>; |
| 204 | reg = <1>; |
| 205 | interrupts = <AT91_PMC_PCKRDY(1)>; |
| 206 | }; |
| 207 | }; |
| 208 | |
| 209 | smd: smdclk { |
| 210 | compatible = "atmel,at91sam9x5-clk-smd"; |
| 211 | #clock-cells = <0>; |
| 212 | clocks = <&plladiv>, <&utmi>; |
| 213 | }; |
| 214 | |
| 215 | systemck { |
| 216 | compatible = "atmel,at91rm9200-clk-system"; |
| 217 | #address-cells = <1>; |
| 218 | #size-cells = <0>; |
| 219 | |
| 220 | ddrck: ddrck@2 { |
| 221 | #clock-cells = <0>; |
| 222 | reg = <2>; |
| 223 | clocks = <&mck>; |
| 224 | }; |
| 225 | |
| 226 | smdck: smdck@4 { |
| 227 | #clock-cells = <0>; |
| 228 | reg = <4>; |
| 229 | clocks = <&smd>; |
| 230 | }; |
| 231 | |
| 232 | uhpck: uhpck@6 { |
| 233 | #clock-cells = <0>; |
| 234 | reg = <6>; |
| 235 | clocks = <&usb>; |
| 236 | }; |
| 237 | |
| 238 | udpck: udpck@7 { |
| 239 | #clock-cells = <0>; |
| 240 | reg = <7>; |
| 241 | clocks = <&usb>; |
| 242 | }; |
| 243 | |
| 244 | pck0: pck0@8 { |
| 245 | #clock-cells = <0>; |
| 246 | reg = <8>; |
| 247 | clocks = <&prog0>; |
| 248 | }; |
| 249 | |
| 250 | pck1: pck1@9 { |
| 251 | #clock-cells = <0>; |
| 252 | reg = <9>; |
| 253 | clocks = <&prog1>; |
| 254 | }; |
| 255 | }; |
| 256 | |
| 257 | periphck { |
| 258 | compatible = "atmel,at91sam9x5-clk-peripheral"; |
| 259 | #address-cells = <1>; |
| 260 | #size-cells = <0>; |
| 261 | clocks = <&mck>; |
Simon Glass | d3a98cb | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 262 | bootph-all; |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 263 | |
| 264 | |
| 265 | pioAB_clk: pioAB_clk@2 { |
| 266 | #clock-cells = <0>; |
| 267 | reg = <2>; |
| 268 | }; |
| 269 | |
| 270 | pioCD_clk: pioCD_clk@3 { |
| 271 | #clock-cells = <0>; |
| 272 | reg = <3>; |
| 273 | }; |
| 274 | |
| 275 | smd_clk: smd_clk@4 { |
| 276 | #clock-cells = <0>; |
| 277 | reg = <4>; |
| 278 | }; |
| 279 | |
| 280 | usart0_clk: usart0_clk@5 { |
| 281 | #clock-cells = <0>; |
| 282 | reg = <5>; |
| 283 | }; |
| 284 | |
| 285 | usart1_clk: usart1_clk@6 { |
| 286 | #clock-cells = <0>; |
| 287 | reg = <6>; |
| 288 | }; |
| 289 | |
| 290 | usart2_clk: usart2_clk@7 { |
| 291 | #clock-cells = <0>; |
| 292 | reg = <7>; |
| 293 | }; |
| 294 | |
| 295 | twi0_clk: twi0_clk@9 { |
| 296 | reg = <9>; |
| 297 | #clock-cells = <0>; |
| 298 | }; |
| 299 | |
| 300 | twi1_clk: twi1_clk@10 { |
| 301 | #clock-cells = <0>; |
| 302 | reg = <10>; |
| 303 | }; |
| 304 | |
| 305 | twi2_clk: twi2_clk@11 { |
| 306 | #clock-cells = <0>; |
| 307 | reg = <11>; |
| 308 | }; |
| 309 | |
| 310 | mci0_clk: mci0_clk@12 { |
| 311 | #clock-cells = <0>; |
| 312 | reg = <12>; |
| 313 | }; |
| 314 | |
| 315 | spi0_clk: spi0_clk@13 { |
| 316 | #clock-cells = <0>; |
| 317 | reg = <13>; |
| 318 | }; |
| 319 | |
| 320 | spi1_clk: spi1_clk@14 { |
| 321 | #clock-cells = <0>; |
| 322 | reg = <14>; |
| 323 | }; |
| 324 | |
| 325 | uart0_clk: uart0_clk@15 { |
| 326 | #clock-cells = <0>; |
| 327 | reg = <15>; |
| 328 | }; |
| 329 | |
| 330 | uart1_clk: uart1_clk@16 { |
| 331 | #clock-cells = <0>; |
| 332 | reg = <16>; |
| 333 | }; |
| 334 | |
| 335 | tcb0_clk: tcb0_clk@17 { |
| 336 | #clock-cells = <0>; |
| 337 | reg = <17>; |
| 338 | }; |
| 339 | |
| 340 | pwm_clk: pwm_clk@18 { |
| 341 | #clock-cells = <0>; |
| 342 | reg = <18>; |
| 343 | }; |
| 344 | |
| 345 | adc_clk: adc_clk@19 { |
| 346 | #clock-cells = <0>; |
| 347 | reg = <19>; |
| 348 | }; |
| 349 | |
| 350 | dma0_clk: dma0_clk@20 { |
| 351 | #clock-cells = <0>; |
| 352 | reg = <20>; |
| 353 | }; |
| 354 | |
| 355 | dma1_clk: dma1_clk@21 { |
| 356 | #clock-cells = <0>; |
| 357 | reg = <21>; |
| 358 | }; |
| 359 | |
| 360 | uhphs_clk: uhphs_clk@22 { |
| 361 | #clock-cells = <0>; |
| 362 | reg = <22>; |
| 363 | }; |
| 364 | |
| 365 | udphs_clk: udphs_clk@23 { |
| 366 | #clock-cells = <0>; |
| 367 | reg = <23>; |
| 368 | }; |
| 369 | |
| 370 | mci1_clk: mci1_clk@26 { |
| 371 | #clock-cells = <0>; |
| 372 | reg = <26>; |
| 373 | }; |
| 374 | |
| 375 | ssc0_clk: ssc0_clk@28 { |
| 376 | #clock-cells = <0>; |
| 377 | reg = <28>; |
| 378 | }; |
| 379 | }; |
| 380 | }; |
| 381 | |
| 382 | rstc@fffffe00 { |
| 383 | compatible = "atmel,at91sam9g45-rstc"; |
| 384 | reg = <0xfffffe00 0x10>; |
| 385 | clocks = <&clk32k>; |
| 386 | }; |
| 387 | |
| 388 | shdwc@fffffe10 { |
| 389 | compatible = "atmel,at91sam9x5-shdwc"; |
| 390 | reg = <0xfffffe10 0x10>; |
| 391 | clocks = <&clk32k>; |
| 392 | }; |
| 393 | |
| 394 | pit: timer@fffffe30 { |
| 395 | compatible = "atmel,at91sam9260-pit"; |
| 396 | reg = <0xfffffe30 0xf>; |
| 397 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 398 | clocks = <&mck>; |
| 399 | }; |
| 400 | |
| 401 | sckc@fffffe50 { |
| 402 | compatible = "atmel,at91sam9x5-sckc"; |
| 403 | reg = <0xfffffe50 0x4>; |
| 404 | |
| 405 | slow_osc: slow_osc { |
| 406 | compatible = "atmel,at91sam9x5-clk-slow-osc"; |
| 407 | #clock-cells = <0>; |
| 408 | clocks = <&slow_xtal>; |
| 409 | }; |
| 410 | |
| 411 | slow_rc_osc: slow_rc_osc { |
| 412 | compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; |
| 413 | #clock-cells = <0>; |
| 414 | clock-frequency = <32768>; |
| 415 | clock-accuracy = <50000000>; |
| 416 | }; |
| 417 | |
| 418 | clk32k: slck { |
| 419 | compatible = "atmel,at91sam9x5-clk-slow"; |
| 420 | #clock-cells = <0>; |
| 421 | clocks = <&slow_rc_osc>, <&slow_osc>; |
| 422 | }; |
| 423 | }; |
| 424 | |
| 425 | tcb0: timer@f8008000 { |
| 426 | compatible = "atmel,at91sam9x5-tcb"; |
| 427 | reg = <0xf8008000 0x100>; |
| 428 | interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; |
| 429 | clocks = <&tcb0_clk>, <&clk32k>; |
| 430 | clock-names = "t0_clk", "slow_clk"; |
| 431 | }; |
| 432 | |
| 433 | tcb1: timer@f800c000 { |
| 434 | compatible = "atmel,at91sam9x5-tcb"; |
| 435 | reg = <0xf800c000 0x100>; |
| 436 | interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; |
| 437 | clocks = <&tcb0_clk>, <&clk32k>; |
| 438 | clock-names = "t0_clk", "slow_clk"; |
| 439 | }; |
| 440 | |
| 441 | dma0: dma-controller@ffffec00 { |
| 442 | compatible = "atmel,at91sam9g45-dma"; |
| 443 | reg = <0xffffec00 0x200>; |
| 444 | interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; |
| 445 | #dma-cells = <2>; |
| 446 | clocks = <&dma0_clk>; |
| 447 | clock-names = "dma_clk"; |
| 448 | }; |
| 449 | |
| 450 | dma1: dma-controller@ffffee00 { |
| 451 | compatible = "atmel,at91sam9g45-dma"; |
| 452 | reg = <0xffffee00 0x200>; |
| 453 | interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; |
| 454 | #dma-cells = <2>; |
| 455 | clocks = <&dma1_clk>; |
| 456 | clock-names = "dma_clk"; |
| 457 | }; |
| 458 | |
| 459 | pinctrl@fffff400 { |
| 460 | #address-cells = <1>; |
| 461 | #size-cells = <1>; |
| 462 | compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; |
| 463 | ranges = <0xfffff400 0xfffff400 0x800>; |
| 464 | reg = <0xfffff400 0x200 /* pioA */ |
| 465 | 0xfffff600 0x200 /* pioB */ |
| 466 | 0xfffff800 0x200 /* pioC */ |
| 467 | 0xfffffa00 0x200 /* pioD */ |
| 468 | >; |
Simon Glass | d3a98cb | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 469 | bootph-all; |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 470 | |
| 471 | |
| 472 | /* shared pinctrl settings */ |
| 473 | dbgu { |
Simon Glass | d3a98cb | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 474 | bootph-all; |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 475 | pinctrl_dbgu: dbgu-0 { |
| 476 | atmel,pins = |
| 477 | <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP |
| 478 | AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 479 | }; |
| 480 | }; |
| 481 | |
| 482 | usart0 { |
| 483 | pinctrl_usart0: usart0-0 { |
| 484 | atmel,pins = |
| 485 | <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */ |
| 486 | AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA1 periph A */ |
| 487 | }; |
| 488 | |
| 489 | pinctrl_usart0_rts: usart0_rts-0 { |
| 490 | atmel,pins = |
| 491 | <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ |
| 492 | }; |
| 493 | |
| 494 | pinctrl_usart0_cts: usart0_cts-0 { |
| 495 | atmel,pins = |
| 496 | <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ |
| 497 | }; |
| 498 | |
| 499 | pinctrl_usart0_sck: usart0_sck-0 { |
| 500 | atmel,pins = |
| 501 | <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ |
| 502 | }; |
| 503 | }; |
| 504 | |
| 505 | usart1 { |
| 506 | pinctrl_usart1: usart1-0 { |
| 507 | atmel,pins = |
| 508 | <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */ |
| 509 | AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ |
| 510 | }; |
| 511 | |
| 512 | pinctrl_usart1_rts: usart1_rts-0 { |
| 513 | atmel,pins = |
| 514 | <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */ |
| 515 | }; |
| 516 | |
| 517 | pinctrl_usart1_cts: usart1_cts-0 { |
| 518 | atmel,pins = |
| 519 | <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */ |
| 520 | }; |
| 521 | |
| 522 | pinctrl_usart1_sck: usart1_sck-0 { |
| 523 | atmel,pins = |
| 524 | <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ |
| 525 | }; |
| 526 | }; |
| 527 | |
| 528 | usart2 { |
| 529 | pinctrl_usart2: usart2-0 { |
| 530 | atmel,pins = |
| 531 | <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ |
| 532 | AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ |
| 533 | }; |
| 534 | |
| 535 | pinctrl_usart2_rts: usart2_rts-0 { |
| 536 | atmel,pins = |
| 537 | <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ |
| 538 | }; |
| 539 | |
| 540 | pinctrl_usart2_cts: usart2_cts-0 { |
| 541 | atmel,pins = |
| 542 | <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ |
| 543 | }; |
| 544 | |
| 545 | pinctrl_usart2_sck: usart2_sck-0 { |
| 546 | atmel,pins = |
| 547 | <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ |
| 548 | }; |
| 549 | }; |
| 550 | |
| 551 | uart0 { |
| 552 | pinctrl_uart0: uart0-0 { |
| 553 | atmel,pins = |
| 554 | <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC8 periph C */ |
| 555 | AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC9 periph C with pullup */ |
| 556 | }; |
| 557 | }; |
| 558 | |
| 559 | uart1 { |
| 560 | pinctrl_uart1: uart1-0 { |
| 561 | atmel,pins = |
| 562 | <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC16 periph C */ |
| 563 | AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC17 periph C with pullup */ |
| 564 | }; |
| 565 | }; |
| 566 | |
| 567 | nand { |
| 568 | pinctrl_nand: nand-0 { |
| 569 | atmel,pins = |
| 570 | <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */ |
| 571 | AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */ |
| 572 | AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */ |
| 573 | AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */ |
| 574 | AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */ |
| 575 | AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD5 gpio RDY/BUSY pin pull_up */ |
| 576 | AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD6 periph A Data bit 0 */ |
| 577 | AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A Data bit 1 */ |
| 578 | AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A Data bit 2 */ |
| 579 | AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A Data bit 3 */ |
| 580 | AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A Data bit 4 */ |
| 581 | AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A Data bit 5 */ |
| 582 | AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD12 periph A Data bit 6 */ |
| 583 | AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */ |
| 584 | }; |
| 585 | |
| 586 | pinctrl_nand_16bits: nand_16bits-0 { |
| 587 | atmel,pins = |
| 588 | <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD14 periph A Data bit 8 */ |
| 589 | AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A Data bit 9 */ |
| 590 | AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD16 periph A Data bit 10 */ |
| 591 | AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A Data bit 11 */ |
| 592 | AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD18 periph A Data bit 12 */ |
| 593 | AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD19 periph A Data bit 13 */ |
| 594 | AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD20 periph A Data bit 14 */ |
| 595 | AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */ |
| 596 | }; |
| 597 | }; |
| 598 | |
| 599 | mmc0 { |
| 600 | pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { |
| 601 | atmel,pins = |
| 602 | <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ |
| 603 | AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ |
| 604 | AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ |
| 605 | }; |
| 606 | |
| 607 | pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { |
| 608 | atmel,pins = |
| 609 | <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ |
| 610 | AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ |
| 611 | AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ |
| 612 | }; |
| 613 | }; |
| 614 | |
| 615 | mmc1 { |
| 616 | pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { |
| 617 | atmel,pins = |
| 618 | <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA13 periph B */ |
| 619 | AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ |
| 620 | AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA11 periph B with pullup */ |
| 621 | }; |
| 622 | |
| 623 | pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { |
| 624 | atmel,pins = |
| 625 | <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */ |
| 626 | AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */ |
| 627 | AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA4 periph B with pullup */ |
| 628 | }; |
| 629 | }; |
| 630 | |
| 631 | ssc0 { |
| 632 | pinctrl_ssc0_tx: ssc0_tx-0 { |
| 633 | atmel,pins = |
| 634 | <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ |
| 635 | AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ |
| 636 | AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ |
| 637 | }; |
| 638 | |
| 639 | pinctrl_ssc0_rx: ssc0_rx-0 { |
| 640 | atmel,pins = |
| 641 | <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ |
| 642 | AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ |
| 643 | AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ |
| 644 | }; |
| 645 | }; |
| 646 | |
| 647 | spi0 { |
| 648 | pinctrl_spi0: spi0-0 { |
| 649 | atmel,pins = |
| 650 | <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ |
| 651 | AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ |
| 652 | AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ |
| 653 | }; |
| 654 | }; |
| 655 | |
| 656 | spi1 { |
| 657 | pinctrl_spi1: spi1-0 { |
| 658 | atmel,pins = |
| 659 | <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ |
| 660 | AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ |
| 661 | AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ |
| 662 | }; |
| 663 | }; |
| 664 | |
| 665 | i2c0 { |
| 666 | pinctrl_i2c0: i2c0-0 { |
| 667 | atmel,pins = |
| 668 | <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A I2C0 data */ |
| 669 | AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */ |
| 670 | }; |
| 671 | }; |
| 672 | |
| 673 | i2c1 { |
| 674 | pinctrl_i2c1: i2c1-0 { |
| 675 | atmel,pins = |
| 676 | <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC0 periph C I2C1 data */ |
| 677 | AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC1 periph C I2C1 clock */ |
| 678 | }; |
| 679 | }; |
| 680 | |
| 681 | i2c2 { |
| 682 | pinctrl_i2c2: i2c2-0 { |
| 683 | atmel,pins = |
| 684 | <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */ |
| 685 | AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */ |
| 686 | }; |
| 687 | }; |
| 688 | |
| 689 | i2c_gpio0 { |
| 690 | pinctrl_i2c_gpio0: i2c_gpio0-0 { |
| 691 | atmel,pins = |
| 692 | <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */ |
| 693 | AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA31 gpio multidrive I2C0 clock */ |
| 694 | }; |
| 695 | }; |
| 696 | |
| 697 | i2c_gpio1 { |
| 698 | pinctrl_i2c_gpio1: i2c_gpio1-0 { |
| 699 | atmel,pins = |
| 700 | <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PC0 gpio multidrive I2C1 data */ |
| 701 | AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PC1 gpio multidrive I2C1 clock */ |
| 702 | }; |
| 703 | }; |
| 704 | |
| 705 | i2c_gpio2 { |
| 706 | pinctrl_i2c_gpio2: i2c_gpio2-0 { |
| 707 | atmel,pins = |
| 708 | <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */ |
| 709 | AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */ |
| 710 | }; |
| 711 | }; |
| 712 | |
| 713 | pwm0 { |
| 714 | pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { |
| 715 | atmel,pins = |
| 716 | <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 717 | }; |
| 718 | pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { |
| 719 | atmel,pins = |
| 720 | <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 721 | }; |
| 722 | pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { |
| 723 | atmel,pins = |
| 724 | <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 725 | }; |
| 726 | |
| 727 | pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { |
| 728 | atmel,pins = |
| 729 | <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 730 | }; |
| 731 | pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { |
| 732 | atmel,pins = |
| 733 | <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 734 | }; |
| 735 | pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { |
| 736 | atmel,pins = |
| 737 | <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 738 | }; |
| 739 | |
| 740 | pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { |
| 741 | atmel,pins = |
| 742 | <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 743 | }; |
| 744 | pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { |
| 745 | atmel,pins = |
| 746 | <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 747 | }; |
| 748 | |
| 749 | pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { |
| 750 | atmel,pins = |
| 751 | <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 752 | }; |
| 753 | pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { |
| 754 | atmel,pins = |
| 755 | <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 756 | }; |
| 757 | }; |
| 758 | |
| 759 | tcb0 { |
| 760 | pinctrl_tcb0_tclk0: tcb0_tclk0-0 { |
| 761 | atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 762 | }; |
| 763 | |
| 764 | pinctrl_tcb0_tclk1: tcb0_tclk1-0 { |
| 765 | atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 766 | }; |
| 767 | |
| 768 | pinctrl_tcb0_tclk2: tcb0_tclk2-0 { |
| 769 | atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 770 | }; |
| 771 | |
| 772 | pinctrl_tcb0_tioa0: tcb0_tioa0-0 { |
| 773 | atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 774 | }; |
| 775 | |
| 776 | pinctrl_tcb0_tioa1: tcb0_tioa1-0 { |
| 777 | atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 778 | }; |
| 779 | |
| 780 | pinctrl_tcb0_tioa2: tcb0_tioa2-0 { |
| 781 | atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 782 | }; |
| 783 | |
| 784 | pinctrl_tcb0_tiob0: tcb0_tiob0-0 { |
| 785 | atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 786 | }; |
| 787 | |
| 788 | pinctrl_tcb0_tiob1: tcb0_tiob1-0 { |
| 789 | atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 790 | }; |
| 791 | |
| 792 | pinctrl_tcb0_tiob2: tcb0_tiob2-0 { |
| 793 | atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 794 | }; |
| 795 | }; |
| 796 | |
| 797 | tcb1 { |
| 798 | pinctrl_tcb1_tclk0: tcb1_tclk0-0 { |
| 799 | atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 800 | }; |
| 801 | |
| 802 | pinctrl_tcb1_tclk1: tcb1_tclk1-0 { |
| 803 | atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 804 | }; |
| 805 | |
| 806 | pinctrl_tcb1_tclk2: tcb1_tclk2-0 { |
| 807 | atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 808 | }; |
| 809 | |
| 810 | pinctrl_tcb1_tioa0: tcb1_tioa0-0 { |
| 811 | atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 812 | }; |
| 813 | |
| 814 | pinctrl_tcb1_tioa1: tcb1_tioa1-0 { |
| 815 | atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 816 | }; |
| 817 | |
| 818 | pinctrl_tcb1_tioa2: tcb1_tioa2-0 { |
| 819 | atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 820 | }; |
| 821 | |
| 822 | pinctrl_tcb1_tiob0: tcb1_tiob0-0 { |
| 823 | atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 824 | }; |
| 825 | |
| 826 | pinctrl_tcb1_tiob1: tcb1_tiob1-0 { |
| 827 | atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 828 | }; |
| 829 | |
| 830 | pinctrl_tcb1_tiob2: tcb1_tiob2-0 { |
| 831 | atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; |
| 832 | }; |
| 833 | }; |
| 834 | }; |
| 835 | |
| 836 | pioA: gpio@fffff400 { |
| 837 | compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| 838 | reg = <0xfffff400 0x200>; |
| 839 | interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; |
| 840 | #gpio-cells = <2>; |
| 841 | gpio-controller; |
| 842 | interrupt-controller; |
| 843 | #interrupt-cells = <2>; |
| 844 | clocks = <&pioAB_clk>; |
| 845 | }; |
| 846 | |
| 847 | pioB: gpio@fffff600 { |
| 848 | compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| 849 | reg = <0xfffff600 0x200>; |
| 850 | interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; |
| 851 | #gpio-cells = <2>; |
| 852 | gpio-controller; |
| 853 | #gpio-lines = <19>; |
| 854 | interrupt-controller; |
| 855 | #interrupt-cells = <2>; |
| 856 | clocks = <&pioAB_clk>; |
| 857 | }; |
| 858 | |
| 859 | pioC: gpio@fffff800 { |
| 860 | compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| 861 | reg = <0xfffff800 0x200>; |
| 862 | interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; |
| 863 | #gpio-cells = <2>; |
| 864 | gpio-controller; |
| 865 | interrupt-controller; |
| 866 | #interrupt-cells = <2>; |
| 867 | clocks = <&pioCD_clk>; |
| 868 | }; |
| 869 | |
| 870 | pioD: gpio@fffffa00 { |
| 871 | compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| 872 | reg = <0xfffffa00 0x200>; |
| 873 | interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; |
| 874 | #gpio-cells = <2>; |
| 875 | gpio-controller; |
| 876 | #gpio-lines = <22>; |
| 877 | interrupt-controller; |
| 878 | #interrupt-cells = <2>; |
| 879 | clocks = <&pioCD_clk>; |
| 880 | }; |
| 881 | |
| 882 | ssc0: ssc@f0010000 { |
| 883 | compatible = "atmel,at91sam9g45-ssc"; |
| 884 | reg = <0xf0010000 0x4000>; |
| 885 | interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; |
| 886 | dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>, |
| 887 | <&dma0 1 AT91_DMA_CFG_PER_ID(14)>; |
| 888 | dma-names = "tx", "rx"; |
| 889 | pinctrl-names = "default"; |
| 890 | pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; |
| 891 | clocks = <&ssc0_clk>; |
| 892 | clock-names = "pclk"; |
| 893 | status = "disabled"; |
| 894 | }; |
| 895 | |
| 896 | mmc0: mmc@f0008000 { |
| 897 | compatible = "atmel,hsmci"; |
| 898 | reg = <0xf0008000 0x600>; |
| 899 | interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; |
| 900 | dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; |
| 901 | dma-names = "rxtx"; |
| 902 | pinctrl-names = "default"; |
| 903 | clocks = <&mci0_clk>; |
| 904 | clock-names = "mci_clk"; |
| 905 | #address-cells = <1>; |
| 906 | #size-cells = <0>; |
| 907 | status = "disabled"; |
| 908 | }; |
| 909 | |
| 910 | mmc1: mmc@f000c000 { |
| 911 | compatible = "atmel,hsmci"; |
| 912 | reg = <0xf000c000 0x600>; |
| 913 | interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; |
| 914 | dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; |
| 915 | dma-names = "rxtx"; |
| 916 | pinctrl-names = "default"; |
| 917 | clocks = <&mci1_clk>; |
| 918 | clock-names = "mci_clk"; |
| 919 | #address-cells = <1>; |
| 920 | #size-cells = <0>; |
| 921 | status = "disabled"; |
| 922 | }; |
| 923 | |
| 924 | dbgu: serial@fffff200 { |
| 925 | compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; |
| 926 | reg = <0xfffff200 0x200>; |
| 927 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 928 | pinctrl-names = "default"; |
| 929 | pinctrl-0 = <&pinctrl_dbgu>; |
| 930 | dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>, |
| 931 | <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| 932 | dma-names = "tx", "rx"; |
| 933 | clocks = <&mck>; |
| 934 | clock-names = "usart"; |
| 935 | status = "disabled"; |
| 936 | }; |
| 937 | |
| 938 | usart0: serial@f801c000 { |
| 939 | compatible = "atmel,at91sam9260-usart"; |
| 940 | reg = <0xf801c000 0x200>; |
| 941 | interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; |
| 942 | pinctrl-names = "default"; |
| 943 | pinctrl-0 = <&pinctrl_usart0>; |
| 944 | dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>, |
| 945 | <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| 946 | dma-names = "tx", "rx"; |
| 947 | clocks = <&usart0_clk>; |
| 948 | clock-names = "usart"; |
| 949 | status = "disabled"; |
| 950 | }; |
| 951 | |
| 952 | usart1: serial@f8020000 { |
| 953 | compatible = "atmel,at91sam9260-usart"; |
| 954 | reg = <0xf8020000 0x200>; |
| 955 | interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; |
| 956 | pinctrl-names = "default"; |
| 957 | pinctrl-0 = <&pinctrl_usart1>; |
| 958 | dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>, |
| 959 | <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| 960 | dma-names = "tx", "rx"; |
| 961 | clocks = <&usart1_clk>; |
| 962 | clock-names = "usart"; |
| 963 | status = "disabled"; |
| 964 | }; |
| 965 | |
| 966 | usart2: serial@f8024000 { |
| 967 | compatible = "atmel,at91sam9260-usart"; |
| 968 | reg = <0xf8024000 0x200>; |
| 969 | interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; |
| 970 | pinctrl-names = "default"; |
| 971 | pinctrl-0 = <&pinctrl_usart2>; |
| 972 | dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>, |
| 973 | <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| 974 | dma-names = "tx", "rx"; |
| 975 | clocks = <&usart2_clk>; |
| 976 | clock-names = "usart"; |
| 977 | status = "disabled"; |
| 978 | }; |
| 979 | |
| 980 | i2c0: i2c@f8010000 { |
| 981 | compatible = "atmel,at91sam9x5-i2c"; |
| 982 | reg = <0xf8010000 0x100>; |
| 983 | interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; |
| 984 | dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>, |
| 985 | <&dma0 1 AT91_DMA_CFG_PER_ID(8)>; |
| 986 | dma-names = "tx", "rx"; |
| 987 | #address-cells = <1>; |
| 988 | #size-cells = <0>; |
| 989 | pinctrl-names = "default"; |
| 990 | pinctrl-0 = <&pinctrl_i2c0>; |
| 991 | clocks = <&twi0_clk>; |
| 992 | status = "disabled"; |
| 993 | }; |
| 994 | |
| 995 | i2c1: i2c@f8014000 { |
| 996 | compatible = "atmel,at91sam9x5-i2c"; |
| 997 | reg = <0xf8014000 0x100>; |
| 998 | interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; |
| 999 | dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>, |
| 1000 | <&dma1 1 AT91_DMA_CFG_PER_ID(6)>; |
| 1001 | dma-names = "tx", "rx"; |
| 1002 | #address-cells = <1>; |
| 1003 | #size-cells = <0>; |
| 1004 | pinctrl-names = "default"; |
| 1005 | pinctrl-0 = <&pinctrl_i2c1>; |
| 1006 | clocks = <&twi1_clk>; |
| 1007 | status = "disabled"; |
| 1008 | }; |
| 1009 | |
| 1010 | i2c2: i2c@f8018000 { |
| 1011 | compatible = "atmel,at91sam9x5-i2c"; |
| 1012 | reg = <0xf8018000 0x100>; |
| 1013 | interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; |
| 1014 | dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>, |
| 1015 | <&dma0 1 AT91_DMA_CFG_PER_ID(10)>; |
| 1016 | dma-names = "tx", "rx"; |
| 1017 | #address-cells = <1>; |
| 1018 | #size-cells = <0>; |
| 1019 | pinctrl-names = "default"; |
| 1020 | pinctrl-0 = <&pinctrl_i2c2>; |
| 1021 | clocks = <&twi2_clk>; |
| 1022 | status = "disabled"; |
| 1023 | }; |
| 1024 | |
| 1025 | uart0: serial@f8040000 { |
| 1026 | compatible = "atmel,at91sam9260-usart"; |
| 1027 | reg = <0xf8040000 0x200>; |
| 1028 | interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; |
| 1029 | pinctrl-names = "default"; |
| 1030 | pinctrl-0 = <&pinctrl_uart0>; |
| 1031 | clocks = <&uart0_clk>; |
| 1032 | clock-names = "usart"; |
| 1033 | status = "disabled"; |
| 1034 | }; |
| 1035 | |
| 1036 | uart1: serial@f8044000 { |
| 1037 | compatible = "atmel,at91sam9260-usart"; |
| 1038 | reg = <0xf8044000 0x200>; |
| 1039 | interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; |
| 1040 | pinctrl-names = "default"; |
| 1041 | pinctrl-0 = <&pinctrl_uart1>; |
| 1042 | clocks = <&uart1_clk>; |
| 1043 | clock-names = "usart"; |
| 1044 | status = "disabled"; |
| 1045 | }; |
| 1046 | |
| 1047 | adc0: adc@f804c000 { |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 1048 | compatible = "atmel,at91sam9x5-adc"; |
| 1049 | reg = <0xf804c000 0x100>; |
| 1050 | interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; |
| 1051 | clocks = <&adc_clk>, |
| 1052 | <&adc_op_clk>; |
| 1053 | clock-names = "adc_clk", "adc_op_clk"; |
| 1054 | atmel,adc-use-external-triggers; |
| 1055 | atmel,adc-channels-used = <0xffff>; |
| 1056 | atmel,adc-vref = <3300>; |
| 1057 | atmel,adc-startup-time = <40>; |
| 1058 | atmel,adc-sample-hold-time = <11>; |
| 1059 | atmel,adc-res = <8 10>; |
| 1060 | atmel,adc-res-names = "lowres", "highres"; |
| 1061 | atmel,adc-use-res = "highres"; |
| 1062 | |
| 1063 | trigger0 { |
| 1064 | trigger-name = "external-rising"; |
| 1065 | trigger-value = <0x1>; |
| 1066 | trigger-external; |
| 1067 | }; |
| 1068 | |
| 1069 | trigger1 { |
| 1070 | trigger-name = "external-falling"; |
| 1071 | trigger-value = <0x2>; |
| 1072 | trigger-external; |
| 1073 | }; |
| 1074 | |
| 1075 | trigger2 { |
| 1076 | trigger-name = "external-any"; |
| 1077 | trigger-value = <0x3>; |
| 1078 | trigger-external; |
| 1079 | }; |
| 1080 | |
| 1081 | trigger3 { |
| 1082 | trigger-name = "continuous"; |
| 1083 | trigger-value = <0x6>; |
| 1084 | }; |
| 1085 | }; |
| 1086 | |
| 1087 | spi0: spi@f0000000 { |
| 1088 | #address-cells = <1>; |
| 1089 | #size-cells = <0>; |
| 1090 | compatible = "atmel,at91rm9200-spi"; |
| 1091 | reg = <0xf0000000 0x100>; |
| 1092 | interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; |
| 1093 | dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>, |
| 1094 | <&dma0 1 AT91_DMA_CFG_PER_ID(2)>; |
| 1095 | dma-names = "tx", "rx"; |
| 1096 | pinctrl-names = "default"; |
| 1097 | pinctrl-0 = <&pinctrl_spi0>; |
| 1098 | clocks = <&spi0_clk>; |
| 1099 | clock-names = "spi_clk"; |
| 1100 | status = "disabled"; |
| 1101 | }; |
| 1102 | |
| 1103 | spi1: spi@f0004000 { |
| 1104 | #address-cells = <1>; |
| 1105 | #size-cells = <0>; |
| 1106 | compatible = "atmel,at91rm9200-spi"; |
| 1107 | reg = <0xf0004000 0x100>; |
| 1108 | interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; |
| 1109 | dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>, |
| 1110 | <&dma1 1 AT91_DMA_CFG_PER_ID(2)>; |
| 1111 | dma-names = "tx", "rx"; |
| 1112 | pinctrl-names = "default"; |
| 1113 | pinctrl-0 = <&pinctrl_spi1>; |
| 1114 | clocks = <&spi1_clk>; |
| 1115 | clock-names = "spi_clk"; |
| 1116 | status = "disabled"; |
| 1117 | }; |
| 1118 | |
| 1119 | usb2: gadget@f803c000 { |
| 1120 | #address-cells = <1>; |
| 1121 | #size-cells = <0>; |
| 1122 | compatible = "atmel,at91sam9g45-udc"; |
| 1123 | reg = <0x00500000 0x80000 |
| 1124 | 0xf803c000 0x400>; |
| 1125 | interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; |
| 1126 | clocks = <&utmi>, <&udphs_clk>; |
| 1127 | clock-names = "hclk", "pclk"; |
| 1128 | status = "disabled"; |
| 1129 | |
| 1130 | ep@0 { |
| 1131 | reg = <0>; |
| 1132 | atmel,fifo-size = <64>; |
| 1133 | atmel,nb-banks = <1>; |
| 1134 | }; |
| 1135 | |
| 1136 | ep@1 { |
| 1137 | reg = <1>; |
| 1138 | atmel,fifo-size = <1024>; |
| 1139 | atmel,nb-banks = <2>; |
| 1140 | atmel,can-dma; |
| 1141 | atmel,can-isoc; |
| 1142 | }; |
| 1143 | |
| 1144 | ep@2 { |
| 1145 | reg = <2>; |
| 1146 | atmel,fifo-size = <1024>; |
| 1147 | atmel,nb-banks = <2>; |
| 1148 | atmel,can-dma; |
| 1149 | atmel,can-isoc; |
| 1150 | }; |
| 1151 | |
| 1152 | ep@3 { |
| 1153 | reg = <3>; |
| 1154 | atmel,fifo-size = <1024>; |
| 1155 | atmel,nb-banks = <3>; |
| 1156 | atmel,can-dma; |
| 1157 | }; |
| 1158 | |
| 1159 | ep@4 { |
| 1160 | reg = <4>; |
| 1161 | atmel,fifo-size = <1024>; |
| 1162 | atmel,nb-banks = <3>; |
| 1163 | atmel,can-dma; |
| 1164 | }; |
| 1165 | |
| 1166 | ep@5 { |
| 1167 | reg = <5>; |
| 1168 | atmel,fifo-size = <1024>; |
| 1169 | atmel,nb-banks = <3>; |
| 1170 | atmel,can-dma; |
| 1171 | atmel,can-isoc; |
| 1172 | }; |
| 1173 | |
| 1174 | ep@6 { |
| 1175 | reg = <6>; |
| 1176 | atmel,fifo-size = <1024>; |
| 1177 | atmel,nb-banks = <3>; |
| 1178 | atmel,can-dma; |
| 1179 | atmel,can-isoc; |
| 1180 | }; |
| 1181 | }; |
| 1182 | |
Stefan Roese | 9be1ee8 | 2019-04-02 10:57:26 +0200 | [diff] [blame] | 1183 | watchdog: watchdog@fffffe40 { |
Wenyou Yang | 66eb6a7 | 2017-04-18 13:49:34 +0800 | [diff] [blame] | 1184 | compatible = "atmel,at91sam9260-wdt"; |
| 1185 | reg = <0xfffffe40 0x10>; |
| 1186 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1187 | clocks = <&clk32k>; |
| 1188 | atmel,watchdog-type = "hardware"; |
| 1189 | atmel,reset-type = "all"; |
| 1190 | atmel,dbg-halt; |
| 1191 | status = "disabled"; |
| 1192 | }; |
| 1193 | |
| 1194 | rtc@fffffeb0 { |
| 1195 | compatible = "atmel,at91sam9x5-rtc"; |
| 1196 | reg = <0xfffffeb0 0x40>; |
| 1197 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1198 | clocks = <&clk32k>; |
| 1199 | status = "disabled"; |
| 1200 | }; |
| 1201 | |
| 1202 | pwm0: pwm@f8034000 { |
| 1203 | compatible = "atmel,at91sam9rl-pwm"; |
| 1204 | reg = <0xf8034000 0x300>; |
| 1205 | interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; |
| 1206 | clocks = <&pwm_clk>; |
| 1207 | #pwm-cells = <3>; |
| 1208 | status = "disabled"; |
| 1209 | }; |
| 1210 | }; |
| 1211 | |
| 1212 | nand0: nand@40000000 { |
| 1213 | compatible = "atmel,at91rm9200-nand"; |
| 1214 | #address-cells = <1>; |
| 1215 | #size-cells = <1>; |
| 1216 | reg = <0x40000000 0x10000000 |
| 1217 | 0xffffe000 0x600 /* PMECC Registers */ |
| 1218 | 0xffffe600 0x200 /* PMECC Error Location Registers */ |
| 1219 | 0x00108000 0x18000 /* PMECC looup table in ROM code */ |
| 1220 | >; |
| 1221 | atmel,pmecc-lookup-table-offset = <0x0 0x8000>; |
| 1222 | atmel,nand-addr-offset = <21>; |
| 1223 | atmel,nand-cmd-offset = <22>; |
| 1224 | atmel,nand-has-dma; |
| 1225 | pinctrl-names = "default"; |
| 1226 | pinctrl-0 = <&pinctrl_nand>; |
| 1227 | gpios = <&pioD 5 GPIO_ACTIVE_HIGH |
| 1228 | &pioD 4 GPIO_ACTIVE_HIGH |
| 1229 | 0 |
| 1230 | >; |
| 1231 | status = "disabled"; |
| 1232 | }; |
| 1233 | |
| 1234 | usb0: ohci@00600000 { |
| 1235 | compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| 1236 | reg = <0x00600000 0x100000>; |
| 1237 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; |
| 1238 | clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; |
| 1239 | clock-names = "ohci_clk", "hclk", "uhpck"; |
| 1240 | status = "disabled"; |
| 1241 | }; |
| 1242 | |
| 1243 | usb1: ehci@00700000 { |
| 1244 | compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; |
| 1245 | reg = <0x00700000 0x100000>; |
| 1246 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; |
| 1247 | clocks = <&utmi>, <&uhphs_clk>; |
| 1248 | clock-names = "usb_clk", "ehci_clk"; |
| 1249 | status = "disabled"; |
| 1250 | }; |
| 1251 | }; |
| 1252 | |
| 1253 | i2c-gpio-0 { |
| 1254 | compatible = "i2c-gpio"; |
| 1255 | gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ |
| 1256 | &pioA 31 GPIO_ACTIVE_HIGH /* scl */ |
| 1257 | >; |
| 1258 | i2c-gpio,sda-open-drain; |
| 1259 | i2c-gpio,scl-open-drain; |
| 1260 | i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| 1261 | #address-cells = <1>; |
| 1262 | #size-cells = <0>; |
| 1263 | pinctrl-names = "default"; |
| 1264 | pinctrl-0 = <&pinctrl_i2c_gpio0>; |
| 1265 | status = "disabled"; |
| 1266 | }; |
| 1267 | |
| 1268 | i2c-gpio-1 { |
| 1269 | compatible = "i2c-gpio"; |
| 1270 | gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ |
| 1271 | &pioC 1 GPIO_ACTIVE_HIGH /* scl */ |
| 1272 | >; |
| 1273 | i2c-gpio,sda-open-drain; |
| 1274 | i2c-gpio,scl-open-drain; |
| 1275 | i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| 1276 | #address-cells = <1>; |
| 1277 | #size-cells = <0>; |
| 1278 | pinctrl-names = "default"; |
| 1279 | pinctrl-0 = <&pinctrl_i2c_gpio1>; |
| 1280 | status = "disabled"; |
| 1281 | }; |
| 1282 | |
| 1283 | i2c-gpio-2 { |
| 1284 | compatible = "i2c-gpio"; |
| 1285 | gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ |
| 1286 | &pioB 5 GPIO_ACTIVE_HIGH /* scl */ |
| 1287 | >; |
| 1288 | i2c-gpio,sda-open-drain; |
| 1289 | i2c-gpio,scl-open-drain; |
| 1290 | i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| 1291 | #address-cells = <1>; |
| 1292 | #size-cells = <0>; |
| 1293 | pinctrl-names = "default"; |
| 1294 | pinctrl-0 = <&pinctrl_i2c_gpio2>; |
| 1295 | status = "disabled"; |
| 1296 | }; |
| 1297 | }; |