Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | |
| 3 | /dts-v1/; |
| 4 | |
| 5 | #include <dt-bindings/gpio/gpio.h> |
| 6 | #include <dt-bindings/pinctrl/rockchip.h> |
| 7 | #include <dt-bindings/soc/rockchip,vop2.h> |
| 8 | #include "rk3566.dtsi" |
| 9 | |
| 10 | / { |
| 11 | model = "Firefly Station M2"; |
| 12 | compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566"; |
| 13 | |
| 14 | aliases { |
Tom Rini | 93743d2 | 2024-04-01 09:08:13 -0400 | [diff] [blame] | 15 | ethernet0 = &gmac1; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 16 | mmc0 = &sdmmc0; |
| 17 | mmc1 = &sdhci; |
| 18 | mmc2 = &sdmmc1; |
| 19 | }; |
| 20 | |
| 21 | chosen: chosen { |
| 22 | stdout-path = "serial2:1500000n8"; |
| 23 | }; |
| 24 | |
| 25 | gmac1_clkin: external-gmac1-clock { |
| 26 | compatible = "fixed-clock"; |
| 27 | clock-frequency = <125000000>; |
| 28 | clock-output-names = "gmac1_clkin"; |
| 29 | #clock-cells = <0>; |
| 30 | }; |
| 31 | |
| 32 | hdmi-con { |
| 33 | compatible = "hdmi-connector"; |
| 34 | type = "a"; |
| 35 | |
| 36 | port { |
| 37 | hdmi_con_in: endpoint { |
| 38 | remote-endpoint = <&hdmi_out_con>; |
| 39 | }; |
| 40 | }; |
| 41 | }; |
| 42 | |
| 43 | leds { |
| 44 | compatible = "gpio-leds"; |
| 45 | |
| 46 | led-user { |
| 47 | label = "user-led"; |
| 48 | default-state = "on"; |
| 49 | gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; |
| 50 | linux,default-trigger = "heartbeat"; |
| 51 | pinctrl-names = "default"; |
| 52 | pinctrl-0 = <&user_led_enable_h>; |
| 53 | retain-state-suspended; |
| 54 | }; |
| 55 | }; |
| 56 | |
| 57 | rk809-sound { |
| 58 | compatible = "simple-audio-card"; |
| 59 | simple-audio-card,format = "i2s"; |
| 60 | simple-audio-card,name = "STATION-M2-FRONT"; |
| 61 | simple-audio-card,mclk-fs = <256>; |
| 62 | status = "okay"; |
| 63 | |
| 64 | simple-audio-card,cpu { |
| 65 | sound-dai = <&i2s1_8ch>; |
| 66 | }; |
| 67 | |
| 68 | simple-audio-card,codec { |
| 69 | sound-dai = <&rk809>; |
| 70 | }; |
| 71 | }; |
| 72 | |
| 73 | sdio_pwrseq: sdio-pwrseq { |
| 74 | status = "okay"; |
| 75 | compatible = "mmc-pwrseq-simple"; |
| 76 | clocks = <&rk809 1>; |
| 77 | clock-names = "ext_clock"; |
| 78 | pinctrl-names = "default"; |
| 79 | pinctrl-0 = <&wifi_enable_h>; |
| 80 | reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; |
| 81 | }; |
| 82 | |
| 83 | usb_5v: usb-5v-regulator { |
| 84 | compatible = "regulator-fixed"; |
| 85 | regulator-name = "usb_5v"; |
| 86 | regulator-always-on; |
| 87 | regulator-boot-on; |
| 88 | regulator-min-microvolt = <5000000>; |
| 89 | regulator-max-microvolt = <5000000>; |
| 90 | }; |
| 91 | |
| 92 | vcc5v0_sys: vcc5v0-sys-regulator { |
| 93 | compatible = "regulator-fixed"; |
| 94 | regulator-name = "vcc5v0_sys"; |
| 95 | regulator-always-on; |
| 96 | regulator-boot-on; |
| 97 | regulator-min-microvolt = <5000000>; |
| 98 | regulator-max-microvolt = <5000000>; |
| 99 | vin-supply = <&usb_5v>; |
| 100 | }; |
| 101 | |
| 102 | vcc3v3_pcie: vcc3v3-pcie-regulator { |
| 103 | compatible = "regulator-fixed"; |
| 104 | enable-active-high; |
| 105 | gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 106 | pinctrl-names = "default"; |
| 107 | pinctrl-0 = <&pcie_enable_h>; |
| 108 | regulator-name = "vcc3v3_pcie"; |
| 109 | regulator-min-microvolt = <3300000>; |
| 110 | regulator-max-microvolt = <3300000>; |
| 111 | vin-supply = <&vcc5v0_sys>; |
| 112 | }; |
| 113 | |
| 114 | vcc3v3_sys: vcc3v3-sys-regulator { |
| 115 | compatible = "regulator-fixed"; |
| 116 | regulator-name = "vcc3v3_sys"; |
| 117 | regulator-min-microvolt = <3300000>; |
| 118 | regulator-max-microvolt = <3300000>; |
| 119 | regulator-always-on; |
| 120 | vin-supply = <&vcc5v0_sys>; |
| 121 | }; |
| 122 | |
| 123 | vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { |
| 124 | compatible = "regulator-fixed"; |
| 125 | regulator-name = "vcc5v0_usb30_host"; |
| 126 | enable-active-high; |
| 127 | gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; |
| 128 | pinctrl-names = "default"; |
| 129 | pinctrl-0 = <&vcc5v0_usb30_host_en_h>; |
| 130 | regulator-always-on; |
| 131 | regulator-min-microvolt = <5000000>; |
| 132 | regulator-max-microvolt = <5000000>; |
| 133 | vin-supply = <&vcc5v0_sys>; |
| 134 | }; |
| 135 | |
| 136 | vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { |
| 137 | compatible = "regulator-fixed"; |
| 138 | regulator-name = "vcc5v0_usb_otg"; |
| 139 | enable-active-high; |
| 140 | gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 141 | pinctrl-names = "default"; |
| 142 | pinctrl-0 = <&vcc5v0_usb_otg_en_h>; |
| 143 | regulator-always-on; |
| 144 | regulator-min-microvolt = <5000000>; |
| 145 | regulator-max-microvolt = <5000000>; |
| 146 | vin-supply = <&vcc5v0_sys>; |
| 147 | }; |
| 148 | }; |
| 149 | |
| 150 | &combphy1 { |
| 151 | status = "okay"; |
| 152 | }; |
| 153 | |
| 154 | &combphy2 { |
| 155 | status = "okay"; |
| 156 | }; |
| 157 | |
| 158 | &cpu0 { |
| 159 | cpu-supply = <&vdd_cpu>; |
| 160 | }; |
| 161 | |
| 162 | &cpu1 { |
| 163 | cpu-supply = <&vdd_cpu>; |
| 164 | }; |
| 165 | |
| 166 | &cpu2 { |
| 167 | cpu-supply = <&vdd_cpu>; |
| 168 | }; |
| 169 | |
| 170 | &cpu3 { |
| 171 | cpu-supply = <&vdd_cpu>; |
| 172 | }; |
| 173 | |
| 174 | &gmac1 { |
| 175 | assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; |
| 176 | assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; |
| 177 | clock_in_out = "input"; |
| 178 | phy-mode = "rgmii"; |
| 179 | phy-supply = <&vcc_3v3>; |
| 180 | pinctrl-names = "default"; |
| 181 | pinctrl-0 = <&gmac1m0_miim |
| 182 | &gmac1m0_tx_bus2 |
| 183 | &gmac1m0_rx_bus2 |
| 184 | &gmac1m0_rgmii_clk |
| 185 | &gmac1m0_clkinout |
| 186 | &gmac1m0_rgmii_bus>; |
| 187 | snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; |
| 188 | snps,reset-active-low; |
| 189 | /* Reset time is 20ms, 100ms for rtl8211f */ |
| 190 | snps,reset-delays-us = <0 20000 100000>; |
| 191 | tx_delay = <0x4f>; |
| 192 | rx_delay = <0x24>; |
| 193 | phy-handle = <&rgmii_phy1>; |
| 194 | status = "okay"; |
| 195 | }; |
| 196 | |
| 197 | &gpu { |
| 198 | mali-supply = <&vdd_gpu>; |
| 199 | status = "okay"; |
| 200 | }; |
| 201 | |
| 202 | &hdmi { |
| 203 | avdd-0v9-supply = <&vdda0v9_image>; |
| 204 | avdd-1v8-supply = <&vcca1v8_image>; |
| 205 | status = "okay"; |
| 206 | }; |
| 207 | |
| 208 | &hdmi_in { |
| 209 | hdmi_in_vp0: endpoint { |
| 210 | remote-endpoint = <&vp0_out_hdmi>; |
| 211 | }; |
| 212 | }; |
| 213 | |
| 214 | &hdmi_out { |
| 215 | hdmi_out_con: endpoint { |
| 216 | remote-endpoint = <&hdmi_con_in>; |
| 217 | }; |
| 218 | }; |
| 219 | |
| 220 | &hdmi_sound { |
| 221 | status = "okay"; |
| 222 | }; |
| 223 | |
| 224 | &i2c0 { |
| 225 | status = "okay"; |
| 226 | |
| 227 | vdd_cpu: regulator@1c { |
| 228 | compatible = "tcs,tcs4525"; |
| 229 | reg = <0x1c>; |
| 230 | fcs,suspend-voltage-selector = <1>; |
| 231 | regulator-name = "vdd_cpu"; |
| 232 | regulator-min-microvolt = <800000>; |
| 233 | regulator-max-microvolt = <1150000>; |
| 234 | regulator-ramp-delay = <2300>; |
| 235 | regulator-always-on; |
| 236 | regulator-boot-on; |
| 237 | vin-supply = <&vcc5v0_sys>; |
| 238 | |
| 239 | regulator-state-mem { |
| 240 | regulator-off-in-suspend; |
| 241 | }; |
| 242 | }; |
| 243 | |
| 244 | rk809: pmic@20 { |
| 245 | compatible = "rockchip,rk809"; |
| 246 | reg = <0x20>; |
| 247 | interrupt-parent = <&gpio0>; |
| 248 | interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; |
| 249 | clock-output-names = "rk808-clkout1", "rk808-clkout2"; |
| 250 | assigned-clocks = <&cru I2S1_MCLKOUT_TX>; |
| 251 | assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; |
| 252 | clock-names = "mclk"; |
| 253 | clocks = <&cru I2S1_MCLKOUT_TX>; |
| 254 | pinctrl-names = "default"; |
| 255 | pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; |
| 256 | rockchip,system-power-controller; |
| 257 | wakeup-source; |
| 258 | #clock-cells = <1>; |
| 259 | #sound-dai-cells = <0>; |
| 260 | |
| 261 | vcc1-supply = <&vcc3v3_sys>; |
| 262 | vcc2-supply = <&vcc3v3_sys>; |
| 263 | vcc3-supply = <&vcc3v3_sys>; |
| 264 | vcc4-supply = <&vcc3v3_sys>; |
| 265 | vcc5-supply = <&vcc3v3_sys>; |
| 266 | vcc6-supply = <&vcc3v3_sys>; |
| 267 | vcc7-supply = <&vcc3v3_sys>; |
| 268 | vcc8-supply = <&vcc3v3_sys>; |
| 269 | vcc9-supply = <&vcc3v3_sys>; |
| 270 | |
| 271 | codec { |
| 272 | mic-in-differential; |
| 273 | }; |
| 274 | |
| 275 | regulators { |
| 276 | vdd_log: DCDC_REG1 { |
| 277 | regulator-name = "vdd_log"; |
| 278 | regulator-always-on; |
| 279 | regulator-boot-on; |
| 280 | regulator-min-microvolt = <500000>; |
| 281 | regulator-max-microvolt = <1350000>; |
| 282 | regulator-ramp-delay = <6001>; |
| 283 | |
| 284 | regulator-state-mem { |
| 285 | regulator-on-in-suspend; |
| 286 | regulator-suspend-microvolt = <900000>; |
| 287 | }; |
| 288 | }; |
| 289 | |
| 290 | vdd_gpu: DCDC_REG2 { |
| 291 | regulator-name = "vdd_gpu"; |
| 292 | regulator-min-microvolt = <900000>; |
| 293 | regulator-max-microvolt = <1350000>; |
| 294 | regulator-ramp-delay = <6001>; |
| 295 | |
| 296 | regulator-state-mem { |
| 297 | regulator-off-in-suspend; |
| 298 | regulator-suspend-microvolt = <900000>; |
| 299 | }; |
| 300 | }; |
| 301 | |
| 302 | vcc_ddr: DCDC_REG3 { |
| 303 | regulator-name = "vcc_ddr"; |
| 304 | regulator-always-on; |
| 305 | regulator-boot-on; |
| 306 | regulator-min-microvolt = <1100000>; |
| 307 | regulator-max-microvolt = <1100000>; |
| 308 | regulator-initial-mode = <0x2>; |
| 309 | regulator-state-mem { |
| 310 | regulator-on-in-suspend; |
| 311 | }; |
| 312 | }; |
| 313 | |
| 314 | vdd_npu: DCDC_REG4 { |
| 315 | regulator-name = "vdd_npu"; |
| 316 | regulator-min-microvolt = <900000>; |
| 317 | regulator-max-microvolt = <1350000>; |
| 318 | regulator-initial-mode = <0x2>; |
| 319 | regulator-state-mem { |
| 320 | regulator-off-in-suspend; |
| 321 | }; |
| 322 | }; |
| 323 | |
| 324 | vcc_1v8: DCDC_REG5 { |
| 325 | regulator-name = "vcc_1v8"; |
| 326 | regulator-always-on; |
| 327 | regulator-boot-on; |
| 328 | regulator-min-microvolt = <1800000>; |
| 329 | regulator-max-microvolt = <1800000>; |
| 330 | |
| 331 | regulator-state-mem { |
| 332 | regulator-on-in-suspend; |
| 333 | regulator-suspend-microvolt = <1800000>; |
| 334 | }; |
| 335 | }; |
| 336 | |
| 337 | vdda0v9_image: LDO_REG1 { |
| 338 | regulator-name = "vdda0v9_image"; |
| 339 | regulator-always-on; |
| 340 | regulator-boot-on; |
| 341 | regulator-min-microvolt = <900000>; |
| 342 | regulator-max-microvolt = <900000>; |
| 343 | |
| 344 | regulator-state-mem { |
| 345 | regulator-on-in-suspend; |
| 346 | regulator-suspend-microvolt = <900000>; |
| 347 | }; |
| 348 | }; |
| 349 | |
| 350 | vdda_0v9: LDO_REG2 { |
| 351 | regulator-name = "vdda_0v9"; |
| 352 | regulator-always-on; |
| 353 | regulator-boot-on; |
| 354 | regulator-min-microvolt = <900000>; |
| 355 | regulator-max-microvolt = <900000>; |
| 356 | |
| 357 | regulator-state-mem { |
| 358 | regulator-on-in-suspend; |
| 359 | regulator-suspend-microvolt = <900000>; |
| 360 | }; |
| 361 | }; |
| 362 | |
| 363 | vdda0v9_pmu: LDO_REG3 { |
| 364 | regulator-name = "vdda0v9_pmu"; |
| 365 | regulator-always-on; |
| 366 | regulator-boot-on; |
| 367 | regulator-min-microvolt = <900000>; |
| 368 | regulator-max-microvolt = <900000>; |
| 369 | regulator-state-mem { |
| 370 | regulator-on-in-suspend; |
| 371 | regulator-suspend-microvolt = <900000>; |
| 372 | }; |
| 373 | }; |
| 374 | |
| 375 | vccio_acodec: LDO_REG4 { |
| 376 | regulator-name = "vccio_acodec"; |
| 377 | regulator-always-on; |
| 378 | regulator-boot-on; |
| 379 | regulator-min-microvolt = <3300000>; |
| 380 | regulator-max-microvolt = <3300000>; |
| 381 | |
| 382 | regulator-state-mem { |
| 383 | regulator-on-in-suspend; |
| 384 | regulator-suspend-microvolt = <3300000>; |
| 385 | |
| 386 | }; |
| 387 | }; |
| 388 | |
| 389 | vccio_sd: LDO_REG5 { |
| 390 | regulator-name = "vccio_sd"; |
| 391 | regulator-always-on; |
| 392 | regulator-boot-on; |
| 393 | regulator-min-microvolt = <1800000>; |
| 394 | regulator-max-microvolt = <3300000>; |
| 395 | |
| 396 | regulator-state-mem { |
| 397 | regulator-on-in-suspend; |
| 398 | regulator-suspend-microvolt = <3300000>; |
| 399 | }; |
| 400 | }; |
| 401 | |
| 402 | vcc3v3_pmu: LDO_REG6 { |
| 403 | regulator-name = "vcc3v3_pmu"; |
| 404 | regulator-always-on; |
| 405 | regulator-boot-on; |
| 406 | regulator-min-microvolt = <3300000>; |
| 407 | regulator-max-microvolt = <3300000>; |
| 408 | |
| 409 | regulator-state-mem { |
| 410 | regulator-on-in-suspend; |
| 411 | regulator-suspend-microvolt = <3300000>; |
| 412 | }; |
| 413 | }; |
| 414 | |
| 415 | vcca_1v8: LDO_REG7 { |
| 416 | regulator-name = "vcca_1v8"; |
| 417 | regulator-always-on; |
| 418 | regulator-boot-on; |
| 419 | regulator-min-microvolt = <1800000>; |
| 420 | regulator-max-microvolt = <1800000>; |
| 421 | |
| 422 | regulator-state-mem { |
| 423 | regulator-on-in-suspend; |
| 424 | regulator-suspend-microvolt = <1800000>; |
| 425 | }; |
| 426 | }; |
| 427 | |
| 428 | vcca1v8_pmu: LDO_REG8 { |
| 429 | regulator-name = "vcca1v8_pmu"; |
| 430 | regulator-always-on; |
| 431 | regulator-boot-on; |
| 432 | regulator-min-microvolt = <1800000>; |
| 433 | regulator-max-microvolt = <1800000>; |
| 434 | |
| 435 | regulator-state-mem { |
| 436 | regulator-on-in-suspend; |
| 437 | regulator-suspend-microvolt = <1800000>; |
| 438 | }; |
| 439 | }; |
| 440 | |
| 441 | vcca1v8_image: LDO_REG9 { |
| 442 | regulator-name = "vcca1v8_image"; |
| 443 | regulator-always-on; |
| 444 | regulator-boot-on; |
| 445 | regulator-min-microvolt = <1800000>; |
| 446 | regulator-max-microvolt = <1800000>; |
| 447 | |
| 448 | regulator-state-mem { |
| 449 | regulator-on-in-suspend; |
| 450 | regulator-suspend-microvolt = <1800000>; |
| 451 | }; |
| 452 | }; |
| 453 | |
| 454 | vcc_3v3: SWITCH_REG1 { |
| 455 | regulator-boot-on; |
| 456 | regulator-name = "vcc3v3"; |
| 457 | }; |
| 458 | |
| 459 | vcc3v3_sd: SWITCH_REG2 { |
| 460 | regulator-name = "vcc3v3_sd"; |
| 461 | regulator-always-on; |
| 462 | regulator-boot-on; |
| 463 | }; |
| 464 | }; |
| 465 | }; |
| 466 | }; |
| 467 | |
| 468 | &i2c1 { |
| 469 | status = "okay"; |
| 470 | }; |
| 471 | |
| 472 | &i2c2 { |
| 473 | status = "okay"; |
| 474 | }; |
| 475 | |
| 476 | &i2c3 { |
| 477 | pinctrl-names = "default"; |
| 478 | pinctrl-0 = <&i2c3m0_xfer>; |
| 479 | status = "okay"; |
| 480 | }; |
| 481 | |
| 482 | &i2s0_8ch { |
| 483 | status = "okay"; |
| 484 | }; |
| 485 | |
| 486 | &i2s1_8ch { |
| 487 | pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx |
| 488 | &i2s1m0_lrcktx &i2s1m0_lrckrx |
| 489 | &i2s1m0_sdi0 &i2s1m0_sdo0>; |
| 490 | rockchip,trcm-sync-tx-only; |
| 491 | status = "okay"; |
| 492 | }; |
| 493 | |
| 494 | &mdio1 { |
| 495 | rgmii_phy1: ethernet-phy@0 { |
| 496 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 497 | reg = <0x0>; |
| 498 | }; |
| 499 | }; |
| 500 | |
| 501 | &pcie2x1 { |
| 502 | pinctrl-names = "default"; |
| 503 | pinctrl-0 = <&pcie_reset_h>; |
| 504 | reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; |
| 505 | vpcie3v3-supply = <&vcc3v3_pcie>; |
| 506 | status = "okay"; |
| 507 | }; |
| 508 | |
| 509 | &pinctrl { |
| 510 | bt { |
| 511 | bt_enable_h: bt-enable-h { |
| 512 | rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 513 | }; |
| 514 | |
| 515 | bt_host_wake_l: bt-host-wake-l { |
| 516 | rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; |
| 517 | }; |
| 518 | |
| 519 | bt_wake_l: bt-wake-l { |
| 520 | rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 521 | }; |
| 522 | }; |
| 523 | |
| 524 | leds { |
| 525 | user_led_enable_h: user-led-enable-h { |
| 526 | rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 527 | }; |
| 528 | }; |
| 529 | |
| 530 | pcie { |
| 531 | pcie_enable_h: pcie-enable-h { |
| 532 | rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 533 | }; |
| 534 | |
| 535 | pcie_reset_h: pcie-reset-h { |
| 536 | rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 537 | }; |
| 538 | }; |
| 539 | |
| 540 | pmic { |
| 541 | pmic_int: pmic_int { |
| 542 | rockchip,pins = |
| 543 | <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 544 | }; |
| 545 | }; |
| 546 | |
| 547 | sdio-pwrseq { |
| 548 | wifi_enable_h: wifi-enable-h { |
| 549 | rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 550 | }; |
| 551 | }; |
| 552 | |
| 553 | usb { |
| 554 | vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h { |
| 555 | rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 556 | }; |
| 557 | |
| 558 | vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h { |
| 559 | rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 560 | }; |
| 561 | }; |
| 562 | }; |
| 563 | |
| 564 | &pmu_io_domains { |
| 565 | status = "okay"; |
| 566 | pmuio1-supply = <&vcc3v3_pmu>; |
| 567 | pmuio2-supply = <&vcc3v3_pmu>; |
| 568 | vccio1-supply = <&vccio_acodec>; |
| 569 | vccio2-supply = <&vcc_1v8>; |
| 570 | vccio3-supply = <&vccio_sd>; |
| 571 | vccio4-supply = <&vcc_1v8>; |
| 572 | vccio5-supply = <&vcc_3v3>; |
| 573 | vccio6-supply = <&vcc_1v8>; |
| 574 | vccio7-supply = <&vcc_3v3>; |
| 575 | }; |
| 576 | |
| 577 | &sdhci { |
| 578 | bus-width = <8>; |
| 579 | mmc-hs200-1_8v; |
| 580 | non-removable; |
| 581 | vmmc-supply = <&vcc_3v3>; |
| 582 | vqmmc-supply = <&vcc_1v8>; |
| 583 | status = "okay"; |
| 584 | }; |
| 585 | |
| 586 | &sdmmc0 { |
| 587 | bus-width = <4>; |
| 588 | cap-sd-highspeed; |
| 589 | cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 590 | disable-wp; |
| 591 | pinctrl-names = "default"; |
| 592 | pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 593 | sd-uhs-sdr104; |
| 594 | vmmc-supply = <&vcc3v3_sd>; |
| 595 | vqmmc-supply = <&vccio_sd>; |
| 596 | status = "okay"; |
| 597 | }; |
| 598 | |
| 599 | &sdmmc1 { |
| 600 | bus-width = <4>; |
| 601 | cap-sd-highspeed; |
| 602 | cap-sdio-irq; |
| 603 | keep-power-in-suspend; |
| 604 | mmc-pwrseq = <&sdio_pwrseq>; |
| 605 | vmmc-supply = <&vcc3v3_sys>; |
| 606 | vqmmc-supply = <&vcca1v8_pmu>; |
| 607 | pinctrl-names = "default"; |
| 608 | pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; |
| 609 | status = "okay"; |
| 610 | }; |
| 611 | |
| 612 | &tsadc { |
| 613 | status = "okay"; |
| 614 | }; |
| 615 | |
| 616 | &uart0 { |
| 617 | pinctrl-names = "default"; |
| 618 | pinctrl-0 = <&uart0_xfer>; |
| 619 | status = "okay"; |
| 620 | }; |
| 621 | |
| 622 | &uart1 { |
| 623 | pinctrl-names = "default"; |
| 624 | pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; |
| 625 | status = "okay"; |
| 626 | uart-has-rtscts; |
| 627 | |
| 628 | bluetooth { |
| 629 | compatible = "brcm,bcm43438-bt"; |
| 630 | clocks = <&rk809 1>; |
| 631 | clock-names = "lpo"; |
| 632 | device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 633 | host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; |
| 634 | shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 635 | pinctrl-names = "default"; |
| 636 | pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; |
| 637 | vbat-supply = <&vcc3v3_sys>; |
| 638 | vddio-supply = <&vcca1v8_pmu>; |
| 639 | }; |
| 640 | }; |
| 641 | |
| 642 | &uart2 { |
| 643 | status = "okay"; |
| 644 | }; |
| 645 | |
| 646 | &usb2phy0_host { |
| 647 | phy-supply = <&vcc5v0_usb30_host>; |
| 648 | status = "okay"; |
| 649 | }; |
| 650 | |
| 651 | &usb2phy0_otg { |
| 652 | phy-supply = <&vcc5v0_usb_otg>; |
| 653 | status = "okay"; |
| 654 | }; |
| 655 | |
| 656 | &usb2phy1_otg { |
| 657 | phy-supply = <&vcc5v0_usb30_host>; |
| 658 | status = "okay"; |
| 659 | }; |
| 660 | |
| 661 | &usb2phy0 { |
| 662 | status = "okay"; |
| 663 | }; |
| 664 | |
| 665 | &usb2phy1 { |
| 666 | status = "okay"; |
| 667 | }; |
| 668 | |
| 669 | &usb_host0_xhci { |
| 670 | status = "okay"; |
| 671 | }; |
| 672 | |
| 673 | &usb_host1_xhci { |
| 674 | status = "okay"; |
| 675 | }; |
| 676 | |
| 677 | &usb_host0_ehci { |
| 678 | status = "okay"; |
| 679 | }; |
| 680 | |
| 681 | &usb_host0_ohci { |
| 682 | status = "okay"; |
| 683 | }; |
| 684 | |
| 685 | &vop { |
| 686 | assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 687 | assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 688 | status = "okay"; |
| 689 | }; |
| 690 | |
| 691 | &vop_mmu { |
| 692 | status = "okay"; |
| 693 | }; |
| 694 | |
| 695 | &vp0 { |
| 696 | vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 697 | reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 698 | remote-endpoint = <&hdmi_in_vp0>; |
| 699 | }; |
| 700 | }; |