Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / a52d20723b7f36fae0e0061c335328b6694b08c5 / . / dts / upstream / src / arm / ti / omap / dm816x.dtsi
blob: b68686f0643b05d4ff0dce18f59aa35bacaec220 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-only
2
3#include <dt-bindings/bus/ti-sysc.h>
4#include <dt-bindings/clock/dm816.h>
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/pinctrl/omap.h>
7
8/ {
9 compatible = "ti,dm816";
10 interrupt-parent = <&intc>;
11 #address-cells = <1>;
12 #size-cells = <1>;
13 chosen { };
14
15 aliases {
16 i2c0 = &i2c1;
17 i2c1 = &i2c2;
18 serial0 = &uart1;
19 serial1 = &uart2;
20 serial2 = &uart3;
21 ethernet0 = &eth0;
22 ethernet1 = &eth1;
23 };
24
25 cpus {
26 #address-cells = <1>;
27 #size-cells = <0>;
28 cpu@0 {
29 compatible = "arm,cortex-a8";
30 device_type = "cpu";
31 reg = <0>;
32 };
33 };
34
35 pmu {
36 compatible = "arm,cortex-a8-pmu";
37 interrupts = <3>;
38 };
39
40 /*
41 * The soc node represents the soc top level view. It is used for IPs
42 * that are not memory mapped in the MPU view or for the MPU itself.
43 */
44 soc {
45 compatible = "ti,omap-infra";
46 mpu {
47 compatible = "ti,omap3-mpu";
48 ti,hwmods = "mpu";
49 };
50 };
51
52 /*
53 * XXX: Use a flat representation of the dm816x interconnect.
54 * The real dm816x interconnect network is quite complex. Since
55 * it will not bring real advantage to represent that in DT
56 * for the moment, just use a fake OCP bus entry to represent
57 * the whole bus hierarchy.
58 */
59 ocp {
60 compatible = "simple-bus";
61 reg = <0x44000000 0x10000>;
62 interrupts = <9 10>;
63 #address-cells = <1>;
64 #size-cells = <1>;
65 ranges;
66
67 prcm: prcm@48180000 {
68 compatible = "ti,dm816-prcm", "simple-bus";
69 reg = <0x48180000 0x4000>;
70 #address-cells = <1>;
71 #size-cells = <1>;
72 ranges = <0 0x48180000 0x4000>;
73
74 prcm_clocks: clocks {
75 #address-cells = <1>;
76 #size-cells = <0>;
77 };
78
79 prcm_clockdomains: clockdomains {
80 };
81 };
82
83 scrm: scrm@48140000 {
84 compatible = "ti,dm816-scrm", "simple-bus";
85 reg = <0x48140000 0x21000>;
86 #address-cells = <1>;
87 #size-cells = <1>;
88 #pinctrl-cells = <1>;
89 ranges = <0 0x48140000 0x21000>;
90
91 dm816x_pinmux: pinmux@800 {
92 compatible = "pinctrl-single";
93 reg = <0x800 0x50a>;
94 #address-cells = <1>;
95 #size-cells = <0>;
96 #pinctrl-cells = <1>;
97 pinctrl-single,register-width = <16>;
98 pinctrl-single,function-mask = <0xf>;
99 };
100
101 /* Device Configuration Registers */
102 scm_conf: syscon@600 {
103 compatible = "syscon", "simple-bus";
104 reg = <0x600 0x110>;
105 #address-cells = <1>;
106 #size-cells = <1>;
107 ranges = <0 0x600 0x110>;
108
109 usb_phy0: usb-phy@20 {
110 compatible = "ti,dm8168-usb-phy";
111 reg = <0x20 0x8>;
112 reg-names = "phy";
113 clocks = <&main_fapll 6>;
114 clock-names = "refclk";
115 #phy-cells = <0>;
116 syscon = <&scm_conf>;
117 };
118
119 usb_phy1: usb-phy@28 {
120 compatible = "ti,dm8168-usb-phy";
121 reg = <0x28 0x8>;
122 reg-names = "phy";
123 clocks = <&main_fapll 6>;
124 clock-names = "refclk";
125 #phy-cells = <0>;
126 syscon = <&scm_conf>;
127 };
128 };
129
130 scrm_clocks: clocks {
131 #address-cells = <1>;
132 #size-cells = <0>;
133 };
134
135 scrm_clockdomains: clockdomains {
136 };
137 };
138
139 target-module@49000000 {
140 compatible = "ti,sysc-omap4", "ti,sysc";
141 reg = <0x49000000 0x4>;
142 reg-names = "rev";
143 clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
144 clock-names = "fck";
145 #address-cells = <1>;
146 #size-cells = <1>;
147 ranges = <0x0 0x49000000 0x10000>;
148
149 edma: dma@0 {
150 compatible = "ti,edma3-tpcc";
151 reg = <0 0x10000>;
152 reg-names = "edma3_cc";
153 interrupts = <12 13 14>;
154 interrupt-names = "edma3_ccint", "edma3_mperr",
155 "edma3_ccerrint";
156 dma-requests = <64>;
157 #dma-cells = <2>;
158
159 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
160 <&edma_tptc2 3>, <&edma_tptc3 0>;
161
162 ti,edma-memcpy-channels = <20 21>;
163 };
164 };
165
166 target-module@49800000 {
167 compatible = "ti,sysc-omap4", "ti,sysc";
168 reg = <0x49800000 0x4>,
169 <0x49800010 0x4>;
170 reg-names = "rev", "sysc";
171 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
172 ti,sysc-midle = <SYSC_IDLE_FORCE>;
173 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
174 <SYSC_IDLE_SMART>;
175 clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
176 clock-names = "fck";
177 #address-cells = <1>;
178 #size-cells = <1>;
179 ranges = <0x0 0x49800000 0x100000>;
180
181 edma_tptc0: dma@0 {
182 compatible = "ti,edma3-tptc";
183 reg = <0 0x100000>;
184 interrupts = <112>;
185 interrupt-names = "edma3_tcerrint";
186 };
187 };
188
189 target-module@49900000 {
190 compatible = "ti,sysc-omap4", "ti,sysc";
191 reg = <0x49900000 0x4>,
192 <0x49900010 0x4>;
193 reg-names = "rev", "sysc";
194 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
195 ti,sysc-midle = <SYSC_IDLE_FORCE>;
196 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
197 <SYSC_IDLE_SMART>;
198 clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
199 clock-names = "fck";
200 #address-cells = <1>;
201 #size-cells = <1>;
202 ranges = <0x0 0x49900000 0x100000>;
203
204 edma_tptc1: dma@0 {
205 compatible = "ti,edma3-tptc";
206 reg = <0 0x100000>;
207 interrupts = <113>;
208 interrupt-names = "edma3_tcerrint";
209 };
210 };
211
212 target-module@49a00000 {
213 compatible = "ti,sysc-omap4", "ti,sysc";
214 reg = <0x49a00000 0x4>,
215 <0x49a00010 0x4>;
216 reg-names = "rev", "sysc";
217 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
218 ti,sysc-midle = <SYSC_IDLE_FORCE>;
219 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
220 <SYSC_IDLE_SMART>;
221 clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
222 clock-names = "fck";
223 #address-cells = <1>;
224 #size-cells = <1>;
225 ranges = <0x0 0x49a00000 0x100000>;
226
227 edma_tptc2: dma@0 {
228 compatible = "ti,edma3-tptc";
229 reg = <0 0x100000>;
230 interrupts = <114>;
231 interrupt-names = "edma3_tcerrint";
232 };
233 };
234
235 target-module@49b00000 {
236 compatible = "ti,sysc-omap4", "ti,sysc";
237 reg = <0x49b00000 0x4>,
238 <0x49b00010 0x4>;
239 reg-names = "rev", "sysc";
240 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
241 ti,sysc-midle = <SYSC_IDLE_FORCE>;
242 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
243 <SYSC_IDLE_SMART>;
244 clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
245 clock-names = "fck";
246 #address-cells = <1>;
247 #size-cells = <1>;
248 ranges = <0x0 0x49b00000 0x100000>;
249
250 edma_tptc3: dma@0 {
251 compatible = "ti,edma3-tptc";
252 reg = <0 0x100000>;
253 interrupts = <115>;
254 interrupt-names = "edma3_tcerrint";
255 };
256 };
257
258 elm: elm@48080000 {
259 compatible = "ti,am3352-elm";
260 ti,hwmods = "elm";
261 reg = <0x48080000 0x2000>;
262 interrupts = <4>;
263 };
264
265 gpio1: gpio@48032000 {
266 compatible = "ti,omap4-gpio";
267 ti,hwmods = "gpio1";
268 ti,gpio-always-on;
269 reg = <0x48032000 0x1000>;
270 interrupts = <96>;
271 gpio-controller;
272 #gpio-cells = <2>;
273 interrupt-controller;
274 #interrupt-cells = <2>;
275 };
276
277 gpio2: gpio@4804c000 {
278 compatible = "ti,omap4-gpio";
279 ti,hwmods = "gpio2";
280 ti,gpio-always-on;
281 reg = <0x4804c000 0x1000>;
282 interrupts = <98>;
283 gpio-controller;
284 #gpio-cells = <2>;
285 interrupt-controller;
286 #interrupt-cells = <2>;
287 };
288
289 gpmc: gpmc@50000000 {
290 compatible = "ti,am3352-gpmc";
291 ti,hwmods = "gpmc";
292 reg = <0x50000000 0x2000>;
293 #address-cells = <2>;
294 #size-cells = <1>;
295 interrupts = <100>;
296 dmas = <&edma 52 0>;
297 dma-names = "rxtx";
298 gpmc,num-cs = <6>;
299 gpmc,num-waitpins = <2>;
300 interrupt-controller;
301 #interrupt-cells = <2>;
302 gpio-controller;
303 #gpio-cells = <2>;
304 };
305
306 i2c1: i2c@48028000 {
307 compatible = "ti,omap4-i2c";
308 ti,hwmods = "i2c1";
309 reg = <0x48028000 0x1000>;
310 #address-cells = <1>;
311 #size-cells = <0>;
312 interrupts = <70>;
313 };
314
315 i2c2: i2c@4802a000 {
316 compatible = "ti,omap4-i2c";
317 ti,hwmods = "i2c2";
318 reg = <0x4802a000 0x1000>;
319 #address-cells = <1>;
320 #size-cells = <0>;
321 interrupts = <71>;
322 };
323
324 intc: interrupt-controller@48200000 {
325 compatible = "ti,dm816-intc";
326 interrupt-controller;
327 #interrupt-cells = <1>;
328 reg = <0x48200000 0x1000>;
329 };
330
331 rtc: rtc@480c0000 {
332 compatible = "ti,am3352-rtc", "ti,da830-rtc";
333 reg = <0x480c0000 0x1000>;
334 interrupts = <75 76>;
335 ti,hwmods = "rtc";
336 };
337
338 mailbox: mailbox@480c8000 {
339 compatible = "ti,omap4-mailbox";
340 reg = <0x480c8000 0x2000>;
341 interrupts = <77>;
342 ti,hwmods = "mailbox";
343 #mbox-cells = <1>;
344 ti,mbox-num-users = <4>;
345 ti,mbox-num-fifos = <12>;
346 mbox_dsp: mbox-dsp {
347 ti,mbox-tx = <3 0 0>;
348 ti,mbox-rx = <0 0 0>;
349 };
350 };
351
352 spinbox: spinbox@480ca000 {
353 compatible = "ti,omap4-hwspinlock";
354 reg = <0x480ca000 0x2000>;
355 ti,hwmods = "spinbox";
356 #hwlock-cells = <1>;
357 };
358
359 mdio: mdio@4a100800 {
360 compatible = "ti,davinci_mdio";
361 #address-cells = <1>;
362 #size-cells = <0>;
363 reg = <0x4a100800 0x100>;
364 ti,hwmods = "davinci_mdio";
365 bus_freq = <1000000>;
366 phy0: ethernet-phy@0 {
367 reg = <1>;
368 };
369 phy1: ethernet-phy@1 {
370 reg = <2>;
371 };
372 };
373
374 eth0: ethernet@4a100000 {
375 compatible = "ti,dm816-emac";
376 ti,hwmods = "emac0";
377 reg = <0x4a100000 0x800
378 0x4a100900 0x3700>;
379 clocks = <&sysclk24_ck>;
380 syscon = <&scm_conf>;
381 ti,davinci-ctrl-reg-offset = <0>;
382 ti,davinci-ctrl-mod-reg-offset = <0x900>;
383 ti,davinci-ctrl-ram-offset = <0x2000>;
384 ti,davinci-ctrl-ram-size = <0x2000>;
385 interrupts = <40 41 42 43>;
386 phy-handle = <&phy0>;
387 };
388
389 eth1: ethernet@4a120000 {
390 compatible = "ti,dm816-emac";
391 ti,hwmods = "emac1";
392 reg = <0x4a120000 0x4000>;
393 clocks = <&sysclk24_ck>;
394 syscon = <&scm_conf>;
395 ti,davinci-ctrl-reg-offset = <0>;
396 ti,davinci-ctrl-mod-reg-offset = <0x900>;
397 ti,davinci-ctrl-ram-offset = <0x2000>;
398 ti,davinci-ctrl-ram-size = <0x2000>;
399 interrupts = <44 45 46 47>;
400 phy-handle = <&phy1>;
401 };
402
403 sata: sata@4a140000 {
404 compatible = "ti,dm816-ahci";
405 reg = <0x4a140000 0x10000>;
406 interrupts = <16>;
407 ti,hwmods = "sata";
408 };
409
410 mcspi1: spi@48030000 {
411 compatible = "ti,omap4-mcspi";
412 reg = <0x48030000 0x1000>;
413 #address-cells = <1>;
414 #size-cells = <0>;
415 interrupts = <65>;
416 ti,spi-num-cs = <4>;
417 ti,hwmods = "mcspi1";
418 dmas = <&edma 16 0 &edma 17 0
419 &edma 18 0 &edma 19 0
420 &edma 20 0 &edma 21 0
421 &edma 22 0 &edma 23 0>;
422 dma-names = "tx0", "rx0", "tx1", "rx1",
423 "tx2", "rx2", "tx3", "rx3";
424 };
425
426 mmc1: mmc@48060000 {
427 compatible = "ti,omap4-hsmmc";
428 reg = <0x48060000 0x11000>;
429 ti,hwmods = "mmc1";
430 interrupts = <64>;
431 dmas = <&edma 24 0 &edma 25 0>;
432 dma-names = "tx", "rx";
433 };
434
435 timer1_target: target-module@4802e000 {
436 compatible = "ti,sysc-omap4-timer", "ti,sysc";
437 reg = <0x4802e000 0x4>,
438 <0x4802e010 0x4>;
439 reg-names = "rev", "sysc";
440 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
441 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
442 <SYSC_IDLE_NO>,
443 <SYSC_IDLE_SMART>,
444 <SYSC_IDLE_SMART_WKUP>;
445 clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
446 clock-names = "fck";
447 #address-cells = <1>;
448 #size-cells = <1>;
449 ranges = <0x0 0x4802e000 0x1000>;
450
451 timer1: timer@0 {
452 compatible = "ti,dm816-timer";
453 reg = <0 0x1000>;
454 interrupts = <67>;
455 ti,timer-alwon;
456 clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
457 clock-names = "fck";
458 };
459 };
460
461 timer2_target: target-module@48040000 {
462 compatible = "ti,sysc-omap4-timer", "ti,sysc";
463 reg = <0x48040000 0x4>,
464 <0x48040010 0x4>;
465 reg-names = "rev", "sysc";
466 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
467 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
468 <SYSC_IDLE_NO>,
469 <SYSC_IDLE_SMART>,
470 <SYSC_IDLE_SMART_WKUP>;
471 clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
472 clock-names = "fck";
473 #address-cells = <1>;
474 #size-cells = <1>;
475 ranges = <0x0 0x48040000 0x1000>;
476
477 timer2: timer@0 {
478 compatible = "ti,dm816-timer";
479 reg = <0 0x1000>;
480 interrupts = <68>;
481 clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
482 clock-names = "fck";
483 };
484 };
485
486 timer3: timer@48042000 {
487 compatible = "ti,dm816-timer";
488 reg = <0x48042000 0x2000>;
489 interrupts = <69>;
490 ti,hwmods = "timer3";
491 };
492
493 timer4: timer@48044000 {
494 compatible = "ti,dm816-timer";
495 reg = <0x48044000 0x2000>;
496 interrupts = <92>;
497 ti,hwmods = "timer4";
498 ti,timer-pwm;
499 };
500
501 timer5: timer@48046000 {
502 compatible = "ti,dm816-timer";
503 reg = <0x48046000 0x2000>;
504 interrupts = <93>;
505 ti,hwmods = "timer5";
506 ti,timer-pwm;
507 };
508
509 timer6: timer@48048000 {
510 compatible = "ti,dm816-timer";
511 reg = <0x48048000 0x2000>;
512 interrupts = <94>;
513 ti,hwmods = "timer6";
514 ti,timer-pwm;
515 };
516
517 timer7: timer@4804a000 {
518 compatible = "ti,dm816-timer";
519 reg = <0x4804a000 0x2000>;
520 interrupts = <95>;
521 ti,hwmods = "timer7";
522 ti,timer-pwm;
523 };
524
525 uart1: serial@48020000 {
526 compatible = "ti,am3352-uart", "ti,omap3-uart";
527 ti,hwmods = "uart1";
528 reg = <0x48020000 0x2000>;
529 clock-frequency = <48000000>;
530 interrupts = <72>;
531 dmas = <&edma 26 0 &edma 27 0>;
532 dma-names = "tx", "rx";
533 };
534
535 uart2: serial@48022000 {
536 compatible = "ti,am3352-uart", "ti,omap3-uart";
537 ti,hwmods = "uart2";
538 reg = <0x48022000 0x2000>;
539 clock-frequency = <48000000>;
540 interrupts = <73>;
541 dmas = <&edma 28 0 &edma 29 0>;
542 dma-names = "tx", "rx";
543 };
544
545 uart3: serial@48024000 {
546 compatible = "ti,am3352-uart", "ti,omap3-uart";
547 ti,hwmods = "uart3";
548 reg = <0x48024000 0x2000>;
549 clock-frequency = <48000000>;
550 interrupts = <74>;
551 dmas = <&edma 30 0 &edma 31 0>;
552 dma-names = "tx", "rx";
553 };
554
555 /* NOTE: USB needs a transceiver driver for phys to work */
556 usb: usb_otg_hs@47401000 {
557 compatible = "ti,am33xx-usb";
558 reg = <0x47401000 0x400000>;
559 ranges;
560 #address-cells = <1>;
561 #size-cells = <1>;
562 ti,hwmods = "usb_otg_hs";
563
564 usb0: usb@47401000 {
565 compatible = "ti,musb-dm816";
566 reg = <0x47401400 0x400
567 0x47401000 0x200>;
568 reg-names = "mc", "control";
569 interrupts = <18>;
570 interrupt-names = "mc";
571 dr_mode = "host";
572 interface-type = <0>;
573 phys = <&usb_phy0>;
574 phy-names = "usb2-phy";
575 mentor,multipoint = <1>;
576 mentor,num-eps = <16>;
577 mentor,ram-bits = <12>;
578 mentor,power = <500>;
579
580 dmas = <&cppi41dma 0 0 &cppi41dma 1 0
581 &cppi41dma 2 0 &cppi41dma 3 0
582 &cppi41dma 4 0 &cppi41dma 5 0
583 &cppi41dma 6 0 &cppi41dma 7 0
584 &cppi41dma 8 0 &cppi41dma 9 0
585 &cppi41dma 10 0 &cppi41dma 11 0
586 &cppi41dma 12 0 &cppi41dma 13 0
587 &cppi41dma 14 0 &cppi41dma 0 1
588 &cppi41dma 1 1 &cppi41dma 2 1
589 &cppi41dma 3 1 &cppi41dma 4 1
590 &cppi41dma 5 1 &cppi41dma 6 1
591 &cppi41dma 7 1 &cppi41dma 8 1
592 &cppi41dma 9 1 &cppi41dma 10 1
593 &cppi41dma 11 1 &cppi41dma 12 1
594 &cppi41dma 13 1 &cppi41dma 14 1>;
595 dma-names =
596 "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
597 "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
598 "rx14", "rx15",
599 "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
600 "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
601 "tx14", "tx15";
602 };
603
604 usb1: usb@47401800 {
605 compatible = "ti,musb-dm816";
606 reg = <0x47401c00 0x400
607 0x47401800 0x200>;
608 reg-names = "mc", "control";
609 interrupts = <19>;
610 interrupt-names = "mc";
611 dr_mode = "host";
612 interface-type = <0>;
613 phys = <&usb_phy1>;
614 phy-names = "usb2-phy";
615 mentor,multipoint = <1>;
616 mentor,num-eps = <16>;
617 mentor,ram-bits = <12>;
618 mentor,power = <500>;
619
620 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
621 &cppi41dma 17 0 &cppi41dma 18 0
622 &cppi41dma 19 0 &cppi41dma 20 0
623 &cppi41dma 21 0 &cppi41dma 22 0
624 &cppi41dma 23 0 &cppi41dma 24 0
625 &cppi41dma 25 0 &cppi41dma 26 0
626 &cppi41dma 27 0 &cppi41dma 28 0
627 &cppi41dma 29 0 &cppi41dma 15 1
628 &cppi41dma 16 1 &cppi41dma 17 1
629 &cppi41dma 18 1 &cppi41dma 19 1
630 &cppi41dma 20 1 &cppi41dma 21 1
631 &cppi41dma 22 1 &cppi41dma 23 1
632 &cppi41dma 24 1 &cppi41dma 25 1
633 &cppi41dma 26 1 &cppi41dma 27 1
634 &cppi41dma 28 1 &cppi41dma 29 1>;
635 dma-names =
636 "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
637 "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
638 "rx14", "rx15",
639 "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
640 "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
641 "tx14", "tx15";
642 };
643
644 cppi41dma: dma-controller@47402000 {
645 compatible = "ti,am3359-cppi41";
646 reg = <0x47400000 0x1000
647 0x47402000 0x1000
648 0x47403000 0x1000
649 0x47404000 0x4000>;
650 reg-names = "glue", "controller", "scheduler", "queuemgr";
651 interrupts = <17>;
652 interrupt-names = "glue";
653 #dma-cells = <2>;
654 /* For backwards compatibility: */
655 #dma-channels = <30>;
656 dma-channels = <30>;
657 #dma-requests = <256>;
658 dma-requests = <256>;
659 };
660 };
661
662 wd_timer2: wd_timer@480c2000 {
663 compatible = "ti,omap3-wdt";
664 ti,hwmods = "wd_timer";
665 reg = <0x480c2000 0x1000>;
666 interrupts = <0>;
667 };
668 };
669};
670
671#include "dm816x-clocks.dtsi"
672
673/* Preferred always-on timer for clocksource */
674&timer1_target {
675 ti,no-reset-on-init;
676 ti,no-idle;
677 timer@0 {
678 assigned-clocks = <&timer1_fck>;
679 assigned-clock-parents = <&sys_clkin_ck>;
680 };
681};
682
683/* Preferred timer for clockevent */
684&timer2_target {
685 ti,no-reset-on-init;
686 ti,no-idle;
687 timer@0 {
688 assigned-clocks = <&timer2_fck>;
689 assigned-clock-parents = <&sys_clkin_ck>;
690 };
691};