blob: 4c4e72763e128dfdfa5c0689678943d0c78d1859 [file] [log] [blame]
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01001/*
2 * (C) Copyright 2015
Kamil Lulko75d48a62015-12-01 09:08:19 +01003 * Kamil Lulko, <kamil.lulko@gmail.com>
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +01004 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
Antonio Borneo989e8b22015-07-19 22:19:46 +080011#define CONFIG_MISC_INIT_R
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010012
13#define CONFIG_SYS_FLASH_BASE 0x08000000
14
15#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010016
17#define CONFIG_SYS_ICACHE_OFF
18#define CONFIG_SYS_DCACHE_OFF
19
20/*
21 * Configuration of the external SDRAM memory
22 */
23#define CONFIG_NR_DRAM_BANKS 1
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010024#define CONFIG_SYS_RAM_CS 1
25#define CONFIG_SYS_RAM_FREQ_DIV 2
26#define CONFIG_SYS_RAM_BASE 0xD0000000
27#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
28#define CONFIG_SYS_LOAD_ADDR 0xD0400000
29#define CONFIG_LOADADDR 0xD0400000
30
31#define CONFIG_SYS_MAX_FLASH_SECT 12
32#define CONFIG_SYS_MAX_FLASH_BANKS 2
33
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010034#define CONFIG_ENV_OFFSET (256 << 10)
35#define CONFIG_ENV_SECT_SIZE (128 << 10)
36#define CONFIG_ENV_SIZE (8 << 10)
37
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010038#define CONFIG_RED_LED 110
39#define CONFIG_GREEN_LED 109
40
Vikas Manochae750d562016-03-09 15:18:13 -080041#define CONFIG_STM32_FLASH
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010042
Antonio Borneof4a1a862015-07-19 22:19:48 +080043#define CONFIG_SYS_CLK_FREQ 180000000 /* 180 MHz */
44
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010045#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
46
47#define CONFIG_CMDLINE_TAG
48#define CONFIG_SETUP_MEMORY_TAGS
49#define CONFIG_INITRD_TAG
50#define CONFIG_REVISION_TAG
51
52#define CONFIG_SYS_CBSIZE 1024
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010053
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010054#define CONFIG_SYS_MALLOC_LEN (2 << 20)
55
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010056#define CONFIG_BOOTCOMMAND \
57 "run bootcmd_romfs"
58
59#define CONFIG_EXTRA_ENV_SETTINGS \
60 "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
61 "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
62 "bootm 0x08044000 - 0x08042000\0"
63
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010064/*
65 * Command line configuration.
66 */
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010067
rev13@wp.pl6b5e5a92015-03-01 12:44:42 +010068#endif /* __CONFIG_H */