Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / a3d6939ca80e6628505268a9753ad42e50529efb / . / dts / upstream / src / arm64 / qcom / pm7250b.dtsi
blob: 3bf7cf5d17008253f466c2ba87abc3b49751ce4a [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com>
4 */
5
6#include <dt-bindings/iio/qcom,spmi-vadc.h>
7#include <dt-bindings/interrupt-controller/irq.h>
8#include <dt-bindings/spmi/spmi.h>
9
10/ {
11 thermal-zones {
12 pm7250b-thermal {
13 polling-delay-passive = <100>;
14 polling-delay = <0>;
15
16 thermal-sensors = <&pm7250b_temp>;
17
18 trips {
19 trip0 {
20 temperature = <95000>;
21 hysteresis = <0>;
22 type = "passive";
23 };
24
25 trip1 {
26 temperature = <115000>;
27 hysteresis = <0>;
28 type = "hot";
29 };
30
31 trip2 {
32 temperature = <145000>;
33 hysteresis = <0>;
34 type = "critical";
35 };
36 };
37 };
38 };
39};
40
41&spmi_bus {
42 pmic@PM7250B_SID {
43 compatible = "qcom,pm7250b", "qcom,spmi-pmic";
44 reg = <PM7250B_SID SPMI_USID>;
45 #address-cells = <1>;
46 #size-cells = <0>;
47
48 pm7250b_temp: temp-alarm@2400 {
49 compatible = "qcom,spmi-temp-alarm";
50 reg = <0x2400>;
51 interrupts = <PM7250B_SID 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
52 io-channels = <&pm7250b_adc ADC5_DIE_TEMP>;
53 io-channel-names = "thermal";
54 #thermal-sensor-cells = <0>;
55 };
56
57 pm7250b_adc: adc@3100 {
58 compatible = "qcom,spmi-adc5";
59 reg = <0x3100>;
60 #address-cells = <1>;
61 #size-cells = <0>;
62 #io-channel-cells = <1>;
63 interrupts = <PM7250B_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
64
65 channel@0 {
66 reg = <ADC5_REF_GND>;
67 qcom,pre-scaling = <1 1>;
68 label = "ref_gnd";
69 };
70
71 channel@1 {
72 reg = <ADC5_1P25VREF>;
73 qcom,pre-scaling = <1 1>;
74 label = "vref_1p25";
75 };
76
77 channel@2 {
78 reg = <ADC5_DIE_TEMP>;
79 qcom,pre-scaling = <1 1>;
80 label = "die_temp";
81 };
82
83 channel@7 {
84 reg = <ADC5_USB_IN_I>;
85 qcom,pre-scaling = <1 1>;
86 label = "usb_in_i_uv";
87 };
88
89 channel@8 {
90 reg = <ADC5_USB_IN_V_16>;
91 qcom,pre-scaling = <1 16>;
92 label = "usb_in_v_div_16";
93 };
94
95 channel@9 {
96 reg = <ADC5_CHG_TEMP>;
97 qcom,pre-scaling = <1 1>;
98 label = "chg_temp";
99 };
100
101 channel@e {
102 reg = <ADC5_AMUX_THM2>;
103 qcom,hw-settle-time = <200>;
104 qcom,pre-scaling = <1 1>;
105 label = "smb1390_therm";
106 };
107
108 channel@1e {
109 reg = <ADC5_MID_CHG_DIV6>;
110 qcom,pre-scaling = <1 6>;
111 label = "chg_mid";
112 };
113
114 channel@4b {
115 reg = <ADC5_BAT_ID_100K_PU>;
116 qcom,hw-settle-time = <200>;
117 qcom,pre-scaling = <1 1>;
118 qcom,ratiometric;
119 label = "bat_id";
120 };
121
122 channel@83 {
123 reg = <ADC5_VPH_PWR>;
124 qcom,pre-scaling = <1 3>;
125 label = "vph_pwr";
126 };
127
128 channel@84 {
129 reg = <ADC5_VBAT_SNS>;
130 qcom,pre-scaling = <1 3>;
131 label = "vbat_sns";
132 };
133
134 channel@99 {
135 reg = <ADC5_SBUx>;
136 qcom,pre-scaling = <1 3>;
137 label = "chg_sbux";
138 };
139 };
140
141 pm7250b_adc_tm: adc-tm@3500 {
142 compatible = "qcom,spmi-adc-tm5";
143 reg = <0x3500>;
144 interrupts = <PM7250B_SID 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
145 #thermal-sensor-cells = <1>;
146 #address-cells = <1>;
147 #size-cells = <0>;
148 status = "disabled";
149 };
150
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]151 pm7250b_gpios: gpio@c000 {
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]152 compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
153 reg = <0xc000>;
154 gpio-controller;
155 gpio-ranges = <&pm7250b_gpios 0 0 12>;
156 #gpio-cells = <2>;
157 interrupt-controller;
158 #interrupt-cells = <2>;
159 };
160 };
161
162 pmic@PM7250B_SID1 {
163 compatible = "qcom,pm7250b", "qcom,spmi-pmic";
164 reg = <PM7250B_SID1 SPMI_USID>;
165 #address-cells = <1>;
166 #size-cells = <0>;
167 };
168};