Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | * Powerventure Semiconductor PV88060 Voltage Regulator |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: "pvs,pv88060". |
| 5 | - reg: I2C slave address, usually 0x49. |
| 6 | - interrupts: the interrupt outputs of the controller |
| 7 | - regulators: A node that houses a sub-node for each regulator within the |
| 8 | device. Each sub-node is identified using the node's name, with valid |
| 9 | values listed below. The content of each sub-node is defined by the |
| 10 | standard binding for regulators; see regulator.txt. |
| 11 | BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4, |
| 12 | SW5, and SW6. |
| 13 | |
| 14 | Optional properties: |
| 15 | - Any optional property defined in regulator.txt |
| 16 | |
| 17 | Example |
| 18 | |
| 19 | pmic: pv88060@49 { |
| 20 | compatible = "pvs,pv88060"; |
| 21 | reg = <0x49>; |
| 22 | interrupt-parent = <&gpio>; |
| 23 | interrupts = <24 24>; |
| 24 | |
| 25 | regulators { |
| 26 | BUCK1 { |
| 27 | regulator-name = "buck1"; |
| 28 | regulator-min-microvolt = <2800000>; |
| 29 | regulator-max-microvolt = <4387500>; |
| 30 | regulator-min-microamp = <1496000>; |
| 31 | regulator-max-microamp = <4189000>; |
| 32 | regulator-boot-on; |
| 33 | }; |
| 34 | |
| 35 | LDO1 { |
| 36 | regulator-name = "ldo1"; |
| 37 | regulator-min-microvolt = <1200000>; |
| 38 | regulator-max-microvolt = <3350000>; |
| 39 | regulator-boot-on; |
| 40 | }; |
| 41 | |
| 42 | LDO2 { |
| 43 | regulator-name = "ldo2"; |
| 44 | regulator-min-microvolt = <1200000>; |
| 45 | regulator-max-microvolt = <3350000>; |
| 46 | regulator-boot-on; |
| 47 | }; |
| 48 | |
| 49 | LDO3 { |
| 50 | regulator-name = "ldo3"; |
| 51 | regulator-min-microvolt = <1200000>; |
| 52 | regulator-max-microvolt = <3350000>; |
| 53 | regulator-boot-on; |
| 54 | }; |
| 55 | |
| 56 | LDO4 { |
| 57 | regulator-name = "ldo4"; |
| 58 | regulator-min-microvolt = <1200000>; |
| 59 | regulator-max-microvolt = <3350000>; |
| 60 | regulator-boot-on; |
| 61 | }; |
| 62 | |
| 63 | LDO5 { |
| 64 | regulator-name = "ldo5"; |
| 65 | regulator-min-microvolt = <1200000>; |
| 66 | regulator-max-microvolt = <3350000>; |
| 67 | regulator-boot-on; |
| 68 | }; |
| 69 | |
| 70 | LDO6 { |
| 71 | regulator-name = "ldo6"; |
| 72 | regulator-min-microvolt = <1200000>; |
| 73 | regulator-max-microvolt = <3350000>; |
| 74 | regulator-boot-on; |
| 75 | }; |
| 76 | |
| 77 | LDO7 { |
| 78 | regulator-name = "ldo7"; |
| 79 | regulator-min-microvolt = <1200000>; |
| 80 | regulator-max-microvolt = <3350000>; |
| 81 | regulator-boot-on; |
| 82 | }; |
| 83 | |
| 84 | SW1 { |
| 85 | regulator-name = "sw1"; |
| 86 | regulator-min-microvolt = <5000000>; |
| 87 | regulator-max-microvolt = <5000000>; |
| 88 | }; |
| 89 | |
| 90 | SW2 { |
| 91 | regulator-name = "sw2"; |
| 92 | regulator-min-microvolt = <5000000>; |
| 93 | regulator-max-microvolt = <5000000>; |
| 94 | regulator-boot-on; |
| 95 | }; |
| 96 | |
| 97 | SW3 { |
| 98 | regulator-name = "sw3"; |
| 99 | regulator-min-microvolt = <5000000>; |
| 100 | regulator-max-microvolt = <5000000>; |
| 101 | regulator-boot-on; |
| 102 | }; |
| 103 | |
| 104 | SW4 { |
| 105 | regulator-name = "sw4"; |
| 106 | regulator-min-microvolt = <5000000>; |
| 107 | regulator-max-microvolt = <5000000>; |
| 108 | regulator-boot-on; |
| 109 | }; |
| 110 | |
| 111 | SW5 { |
| 112 | regulator-name = "sw5"; |
| 113 | regulator-min-microvolt = <5000000>; |
| 114 | regulator-max-microvolt = <5000000>; |
| 115 | regulator-boot-on; |
| 116 | }; |
| 117 | |
| 118 | SW6 { |
| 119 | regulator-name = "sw6"; |
| 120 | regulator-min-microvolt = <5000000>; |
| 121 | regulator-max-microvolt = <5000000>; |
| 122 | }; |
| 123 | }; |
| 124 | }; |