blob: 99fe1616e555525247d66de1d5a5d89b971919d3 [file] [log] [blame]
Heiko Schocherb7a6d142015-06-15 14:56:41 +02001/*
2 * (C) Copyright 2013 Siemens Schweiz AG
3 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4 *
5 * Based on:
6 * U-Boot file:/include/configs/am335x_evm.h
7 *
8 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9 *
10 * SPDX-License-Identifier: GPL-2.0+
11 */
12
13#ifndef __CONFIG_RASTABAN_H
14#define __CONFIG_RASTABAN_H
15
16#include "siemens-am33x-common.h"
17
Heiko Schocherb7a6d142015-06-15 14:56:41 +020018#define DDR_PLL_FREQ 303
19#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
20
21/* FWD Button = 27
22 * SRV Button = 87 */
23#define BOARD_DFU_BUTTON_GPIO 27
24#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
25/* In dfu mode keep led1 on */
26#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
27 "button_dfu0=27\0" \
28 "button_dfu1=87\0" \
29 "led0=3,0,1\0" \
30 "led1=4,0,0\0" \
31 "led2=5,0,1\0" \
32 "led3=62,0,1\0" \
33 "led4=60,0,1\0" \
34 "led5=63,0,1\0"
35
Heiko Schocherb7a6d142015-06-15 14:56:41 +020036 /* Physical Memory Map */
37#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
38
39/* I2C Configuration */
40#define CONFIG_SYS_I2C_SPEED 100000
41
42#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
43#define EEPROM_ADDR_DDR3 0x90
44#define EEPROM_ADDR_CHIP 0x120
45
Heiko Schocherb7a6d142015-06-15 14:56:41 +020046#undef CONFIG_MII
47#undef CONFIG_PHY_GIGE
48#define CONFIG_PHY_SMSC
49
50#define CONFIG_FACTORYSET
51
52/* Watchdog */
53#define CONFIG_OMAP_WATCHDOG
54
55/* Define own nand partitions */
56#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
57#define CONFIG_ENV_SIZE_REDUND 0x2000
58#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
59
Heiko Schocherb7a6d142015-06-15 14:56:41 +020060#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V3
61
62#ifndef CONFIG_SPL_BUILD
63
64/* Default env settings */
65#define CONFIG_EXTRA_ENV_SETTINGS \
66 "hostname=rastaban\0" \
Heiko Schochercbec11a2016-06-07 08:55:45 +020067 "ubi_off=2048\0"\
Heiko Schocherb7a6d142015-06-15 14:56:41 +020068 "nand_img_size=0x400000\0" \
69 "optargs=\0" \
70 "preboot=draco_led 0\0" \
71 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
72 CONFIG_ENV_SETTINGS_V2 \
73 CONFIG_ENV_SETTINGS_NAND_V2
74
75#ifndef CONFIG_RESTORE_FLASH
76/* set to negative value for no autoboot */
Heiko Schocherb7a6d142015-06-15 14:56:41 +020077
78#define CONFIG_BOOTCOMMAND \
79"if dfubutton; then " \
80 "run dfu_start; " \
81 "reset; " \
82"fi;" \
83"run nand_boot;" \
84"run nand_boot_backup;" \
85"reset;"
86
Heiko Schocherb7a6d142015-06-15 14:56:41 +020087#else
Heiko Schocherb7a6d142015-06-15 14:56:41 +020088
89#define CONFIG_BOOTCOMMAND \
90 "setenv autoload no; " \
91 "dhcp; " \
92 "if tftp 80000000 debrick.scr; then " \
93 "source 80000000; " \
94 "fi"
95#endif
96#endif /* CONFIG_SPL_BUILD */
97#endif /* ! __CONFIG_RASTABAN_H */