wdenk | 452cfd6 | 2002-11-19 11:04:11 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2001 |
| 3 | * Denis Peter, MPL AG Switzerland |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | * |
| 23 | * Note: Part of this code has been derived from linux |
| 24 | * |
| 25 | */ |
| 26 | |
| 27 | /********************************************************************** |
| 28 | * How it works: |
| 29 | * ------------- |
| 30 | * The framelist / Transfer descriptor / Queue Heads are similar like |
| 31 | * in the linux usb_uhci.c. |
| 32 | * |
| 33 | * During initialization, the following skeleton is allocated in init_skel: |
| 34 | * |
| 35 | * framespecific | common chain |
| 36 | * |
| 37 | * framelist[] |
| 38 | * [ 0 ]-----> TD ---------\ |
| 39 | * [ 1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL |
| 40 | * ... TD ---------/ |
| 41 | * [1023]-----> TD --------/ |
| 42 | * |
| 43 | * ^^ ^^ ^^ ^^ ^^ |
| 44 | * 7 TDs for 1 TD for Start of Start of End Chain |
| 45 | * INT (2-128ms) 1ms-INT CTRL Chain BULK Chain |
| 46 | * |
| 47 | * |
| 48 | * Since this is a bootloader, the isochronous transfer descriptor have been removed. |
| 49 | * |
| 50 | * Interrupt Transfers. |
| 51 | * -------------------- |
| 52 | * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They |
| 53 | * will be inserted after the appropriate (depending the interval setting) skeleton TD. |
| 54 | * If an interrupt has been detected the dev->irqhandler is called. The status and number |
| 55 | * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the |
| 56 | * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned, |
| 57 | * the interrupt TD will be reactivated. |
| 58 | * |
| 59 | * Control Transfers |
| 60 | * ----------------- |
| 61 | * Control Transfers are issued by filling the tmp_td with the appropriate data and connect |
| 62 | * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued, |
| 63 | * the programm has to wait for completion. This does not allows asynchronous data transfer. |
| 64 | * |
| 65 | * Bulk Transfers |
| 66 | * -------------- |
| 67 | * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect |
| 68 | * them to the qh_bulk queue header. Before other control/bulk transfers can be issued, |
| 69 | * the programm has to wait for completion. This does not allows asynchronous data transfer. |
| 70 | * |
| 71 | * |
| 72 | */ |
| 73 | |
| 74 | #include <common.h> |
| 75 | #include <pci.h> |
| 76 | |
| 77 | #ifdef CONFIG_USB_UHCI |
| 78 | |
| 79 | #include <usb.h> |
| 80 | #include "usb_uhci.h" |
| 81 | |
| 82 | #define USB_MAX_TEMP_TD 128 /* number of temporary TDs for bulk and control transfers */ |
| 83 | #define USB_MAX_TEMP_INT_TD 32 /* number of temporary TDs for Interrupt transfers */ |
| 84 | |
| 85 | |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 86 | /*#define USB_UHCI_DEBUG */ |
wdenk | 452cfd6 | 2002-11-19 11:04:11 +0000 | [diff] [blame] | 87 | |
| 88 | #ifdef USB_UHCI_DEBUG |
| 89 | #define USB_UHCI_PRINTF(fmt,args...) printf (fmt ,##args) |
| 90 | #else |
| 91 | #define USB_UHCI_PRINTF(fmt,args...) |
| 92 | #endif |
| 93 | |
| 94 | |
| 95 | static int irqvec = -1; /* irq vector, if -1 uhci is stopped / reseted */ |
| 96 | unsigned int usb_base_addr; /* base address */ |
| 97 | |
| 98 | static uhci_td_t td_int[8]; /* Interrupt Transfer descriptors */ |
| 99 | static uhci_qh_t qh_cntrl; /* control Queue Head */ |
| 100 | static uhci_qh_t qh_bulk; /* bulk Queue Head */ |
| 101 | static uhci_qh_t qh_end; /* end Queue Head */ |
| 102 | static uhci_td_t td_last; /* last TD (linked with end chain) */ |
| 103 | |
| 104 | /* temporary tds */ |
| 105 | static uhci_td_t tmp_td[USB_MAX_TEMP_TD]; /* temporary bulk/control td's */ |
| 106 | static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD]; /* temporary interrupt td's */ |
| 107 | |
| 108 | static unsigned long framelist[1024] __attribute__ ((aligned (0x1000))); /* frame list */ |
| 109 | |
| 110 | static struct virt_root_hub rh; /* struct for root hub */ |
| 111 | |
| 112 | /********************************************************************** |
| 113 | * some forward decleration |
| 114 | */ |
| 115 | int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, |
| 116 | void *buffer, int transfer_len,struct devrequest *setup); |
| 117 | |
| 118 | /* fill a td with the approproiate data. Link, status, info and buffer |
| 119 | * are used by the USB controller itselfes, dev is used to identify the |
| 120 | * "connected" device |
| 121 | */ |
| 122 | void usb_fill_td(uhci_td_t* td,unsigned long link,unsigned long status, |
| 123 | unsigned long info, unsigned long buffer, unsigned long dev) |
| 124 | { |
| 125 | td->link=swap_32(link); |
| 126 | td->status=swap_32(status); |
| 127 | td->info=swap_32(info); |
| 128 | td->buffer=swap_32(buffer); |
| 129 | td->dev_ptr=dev; |
| 130 | } |
| 131 | |
| 132 | /* fill a qh with the approproiate data. Head and element are used by the USB controller |
| 133 | * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh. |
| 134 | * Please note, that after completion of the td chain, the entry element is removed / |
| 135 | * marked invalid by the USB controller. |
| 136 | */ |
| 137 | void usb_fill_qh(uhci_qh_t* qh,unsigned long head,unsigned long element) |
| 138 | { |
| 139 | qh->head=swap_32(head); |
| 140 | qh->element=swap_32(element); |
| 141 | qh->dev_ptr=0L; |
| 142 | } |
| 143 | |
| 144 | /* get the status of a td->status |
| 145 | */ |
| 146 | unsigned long usb_uhci_td_stat(unsigned long status) |
| 147 | { |
| 148 | unsigned long result=0; |
| 149 | result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0; |
| 150 | result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0; |
| 151 | result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0; |
| 152 | result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0; |
| 153 | result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0; |
| 154 | result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0; |
| 155 | result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0; |
| 156 | return result; |
| 157 | } |
| 158 | |
| 159 | /* get the status and the transfered len of a td chain. |
| 160 | * called from the completion handler |
| 161 | */ |
| 162 | int usb_get_td_status(uhci_td_t *td,struct usb_device *dev) |
| 163 | { |
| 164 | unsigned long temp,info; |
| 165 | unsigned long stat; |
| 166 | uhci_td_t *mytd=td; |
| 167 | |
| 168 | if(dev->devnum==rh.devnum) |
| 169 | return 0; |
| 170 | dev->act_len=0; |
| 171 | stat=0; |
| 172 | do { |
| 173 | temp=swap_32((unsigned long)mytd->status); |
| 174 | stat=usb_uhci_td_stat(temp); |
| 175 | info=swap_32((unsigned long)mytd->info); |
| 176 | if(((info & 0xff)!= USB_PID_SETUP) && |
| 177 | (((info >> 21) & 0x7ff)!= 0x7ff) && |
| 178 | (temp & 0x7FF)!=0x7ff) |
| 179 | { /* if not setup and not null data pack */ |
| 180 | dev->act_len+=(temp & 0x7FF) + 1; /* the transfered len is act_len + 1 */ |
| 181 | } |
| 182 | if(stat) { /* status no ok */ |
| 183 | dev->status=stat; |
| 184 | return -1; |
| 185 | } |
| 186 | temp=swap_32((unsigned long)mytd->link); |
| 187 | mytd=(uhci_td_t *)(temp & 0xfffffff0); |
| 188 | }while((temp & 0x1)==0); /* process all TDs */ |
| 189 | dev->status=stat; |
| 190 | return 0; /* Ok */ |
| 191 | } |
| 192 | |
| 193 | |
| 194 | /*------------------------------------------------------------------- |
| 195 | * LOW LEVEL STUFF |
| 196 | * assembles QHs und TDs for control, bulk and iso |
| 197 | *-------------------------------------------------------------------*/ |
| 198 | |
| 199 | /* Submits a control message. That is a Setup, Data and Status transfer. |
| 200 | * Routine does not wait for completion. |
| 201 | */ |
| 202 | int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, |
| 203 | int transfer_len,struct devrequest *setup) |
| 204 | { |
| 205 | unsigned long destination, status; |
| 206 | int maxsze = usb_maxpacket(dev, pipe); |
| 207 | unsigned long dataptr; |
| 208 | int len; |
| 209 | int pktsze; |
| 210 | int i=0; |
| 211 | |
| 212 | if (!maxsze) { |
| 213 | USB_UHCI_PRINTF("uhci_submit_control_urb: pipesize for pipe %lx is zero\n", pipe); |
| 214 | return -1; |
| 215 | } |
| 216 | if(((pipe>>8)&0x7f)==rh.devnum) { |
| 217 | /* this is the root hub -> redirect it */ |
| 218 | return uhci_submit_rh_msg(dev,pipe,buffer,transfer_len,setup); |
| 219 | } |
| 220 | USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",transfer_len,maxsze); |
| 221 | /* The "pipe" thing contains the destination in bits 8--18 */ |
| 222 | destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP; /* Setup stage */ |
| 223 | /* 3 errors */ |
| 224 | status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); |
| 225 | /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */ |
| 226 | /* Build the TD for the control request, try forever, 8 bytes of data */ |
| 227 | usb_fill_td(&tmp_td[i],UHCI_PTR_TERM ,status, destination | (7 << 21),(unsigned long)setup,(unsigned long)dev); |
| 228 | #if 0 |
| 229 | { |
| 230 | char *sp=(char *)setup; |
| 231 | printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe, |
| 232 | sp[0],sp[1],sp[2],sp[3],sp[4],sp[5],sp[6],sp[7]); |
| 233 | } |
| 234 | #endif |
| 235 | dataptr = (unsigned long)buffer; |
| 236 | len=transfer_len; |
| 237 | |
| 238 | /* If direction is "send", change the frame from SETUP (0x2D) |
| 239 | to OUT (0xE1). Else change it from SETUP to IN (0x69). */ |
| 240 | destination = (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN)==0 ? USB_PID_OUT : USB_PID_IN); |
| 241 | while (len > 0) { |
| 242 | /* data stage */ |
| 243 | pktsze = len; |
| 244 | i++; |
| 245 | if (pktsze > maxsze) |
| 246 | pktsze = maxsze; |
| 247 | destination ^= 1 << TD_TOKEN_TOGGLE; /* toggle DATA0/1 */ |
| 248 | usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21),dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */ |
| 249 | tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); |
| 250 | |
| 251 | dataptr += pktsze; |
| 252 | len -= pktsze; |
| 253 | } |
| 254 | |
| 255 | /* Build the final TD for control status */ |
| 256 | /* It's only IN if the pipe is out AND we aren't expecting data */ |
| 257 | |
| 258 | destination &= ~UHCI_PID; |
| 259 | if (((pipe & USB_DIR_IN)==0) || (transfer_len == 0)) |
| 260 | destination |= USB_PID_IN; |
| 261 | else |
| 262 | destination |= USB_PID_OUT; |
| 263 | destination |= 1 << TD_TOKEN_TOGGLE; /* End in Data1 */ |
| 264 | i++; |
| 265 | status &=~TD_CTRL_SPD; |
| 266 | /* no limit on errors on final packet , 0 bytes of data */ |
| 267 | usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status | TD_CTRL_IOC, destination | (UHCI_NULL_DATA_SIZE << 21),0,(unsigned long)dev); |
| 268 | tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); /* queue status td */ |
| 269 | /* usb_show_td(i+1);*/ |
| 270 | USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n",i); |
| 271 | /* first mark the control QH element terminated */ |
| 272 | qh_cntrl.element=0xffffffffL; |
| 273 | /* set qh active */ |
| 274 | qh_cntrl.dev_ptr=(unsigned long)dev; |
| 275 | /* fill in tmp_td_chain */ |
| 276 | qh_cntrl.element=swap_32((unsigned long)&tmp_td[0]); |
| 277 | return 0; |
| 278 | } |
| 279 | |
| 280 | /*------------------------------------------------------------------- |
| 281 | * Prepare TDs for bulk transfers. |
| 282 | */ |
| 283 | int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len) |
| 284 | { |
| 285 | unsigned long destination, status,info; |
| 286 | unsigned long dataptr; |
| 287 | int maxsze = usb_maxpacket(dev, pipe); |
| 288 | int len; |
| 289 | int i=0; |
| 290 | |
| 291 | if(transfer_len < 0) { |
| 292 | printf("Negative transfer length in submit_bulk\n"); |
| 293 | return -1; |
| 294 | } |
| 295 | if (!maxsze) |
| 296 | return -1; |
| 297 | /* The "pipe" thing contains the destination in bits 8--18. */ |
| 298 | destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe); |
| 299 | /* 3 errors */ |
| 300 | status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27); |
| 301 | /* ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */ |
| 302 | /* Build the TDs for the bulk request */ |
| 303 | len = transfer_len; |
| 304 | dataptr = (unsigned long)buffer; |
| 305 | do { |
| 306 | int pktsze = len; |
| 307 | if (pktsze > maxsze) |
| 308 | pktsze = maxsze; |
| 309 | /* pktsze bytes of data */ |
| 310 | info = destination | (((pktsze - 1)&UHCI_NULL_DATA_SIZE) << 21) | |
| 311 | (usb_gettoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)) << TD_TOKEN_TOGGLE); |
| 312 | |
| 313 | if((len-pktsze)==0) |
| 314 | status |= TD_CTRL_IOC; /* last one generates INT */ |
| 315 | |
| 316 | usb_fill_td(&tmp_td[i],UHCI_PTR_TERM, status, info,dataptr,(unsigned long)dev); /* Status, pktsze bytes of data */ |
| 317 | if(i>0) |
| 318 | tmp_td[i-1].link=swap_32((unsigned long)&tmp_td[i]); |
| 319 | i++; |
| 320 | dataptr += pktsze; |
| 321 | len -= pktsze; |
| 322 | usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)); |
| 323 | } while (len > 0); |
| 324 | /* first mark the bulk QH element terminated */ |
| 325 | qh_bulk.element=0xffffffffL; |
| 326 | /* set qh active */ |
| 327 | qh_bulk.dev_ptr=(unsigned long)dev; |
| 328 | /* fill in tmp_td_chain */ |
| 329 | qh_bulk.element=swap_32((unsigned long)&tmp_td[0]); |
| 330 | return 0; |
| 331 | } |
| 332 | |
| 333 | |
| 334 | /* search a free interrupt td |
| 335 | */ |
| 336 | uhci_td_t *uhci_alloc_int_td(void) |
| 337 | { |
| 338 | int i; |
| 339 | for(i=0;i<USB_MAX_TEMP_INT_TD;i++) { |
| 340 | if(tmp_int_td[i].dev_ptr==0) /* no device assigned -> free TD */ |
| 341 | return &tmp_int_td[i]; |
| 342 | } |
| 343 | return NULL; |
| 344 | } |
| 345 | |
| 346 | #if 0 |
| 347 | void uhci_show_temp_int_td(void) |
| 348 | { |
| 349 | int i; |
| 350 | for(i=0;i<USB_MAX_TEMP_INT_TD;i++) { |
| 351 | if((tmp_int_td[i].dev_ptr&0x01)!=0x1L) /* no device assigned -> free TD */ |
| 352 | printf("temp_td %d is assigned to dev %lx\n",i,tmp_int_td[i].dev_ptr); |
| 353 | } |
| 354 | printf("all others temp_tds are free\n"); |
| 355 | } |
| 356 | #endif |
| 357 | /*------------------------------------------------------------------- |
| 358 | * submits USB interrupt (ie. polling ;-) |
| 359 | */ |
| 360 | int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len, int interval) |
| 361 | { |
| 362 | int nint, n; |
| 363 | unsigned long status, destination; |
| 364 | unsigned long info,tmp; |
| 365 | uhci_td_t *mytd; |
| 366 | if (interval < 0 || interval >= 256) |
| 367 | return -1; |
| 368 | |
| 369 | if (interval == 0) |
| 370 | nint = 0; |
| 371 | else { |
| 372 | for (nint = 0, n = 1; nint <= 8; nint++, n += n) /* round interval down to 2^n */ |
| 373 | { |
| 374 | if(interval < n) { |
| 375 | interval = n / 2; |
| 376 | break; |
| 377 | } |
| 378 | } |
| 379 | nint--; |
| 380 | } |
| 381 | |
| 382 | USB_UHCI_PRINTF("Rounded interval to %i, chain %i\n", interval, nint); |
| 383 | mytd=uhci_alloc_int_td(); |
| 384 | if(mytd==NULL) { |
| 385 | printf("No free INT TDs found\n"); |
| 386 | return -1; |
| 387 | } |
| 388 | status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27); |
| 389 | /* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27); |
| 390 | */ |
| 391 | |
| 392 | destination =(pipe & PIPE_DEVEP_MASK) | usb_packetid (pipe) | (((transfer_len - 1) & 0x7ff) << 21); |
| 393 | |
| 394 | info = destination | (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) << TD_TOKEN_TOGGLE); |
| 395 | tmp = swap_32(td_int[nint].link); |
| 396 | usb_fill_td(mytd,tmp,status, info,(unsigned long)buffer,(unsigned long)dev); |
| 397 | /* Link it */ |
| 398 | tmp = swap_32((unsigned long)mytd); |
| 399 | td_int[nint].link=tmp; |
| 400 | |
| 401 | usb_dotoggle (dev, usb_pipeendpoint (pipe), usb_pipeout (pipe)); |
| 402 | |
| 403 | return 0; |
| 404 | } |
| 405 | |
| 406 | /********************************************************************** |
| 407 | * Low Level functions |
| 408 | */ |
| 409 | |
| 410 | |
| 411 | void reset_hc(void) |
| 412 | { |
| 413 | |
| 414 | /* Global reset for 100ms */ |
| 415 | out16r( usb_base_addr + USBPORTSC1,0x0204); |
| 416 | out16r( usb_base_addr + USBPORTSC2,0x0204); |
| 417 | out16r( usb_base_addr + USBCMD,USBCMD_GRESET | USBCMD_RS); |
| 418 | /* Turn off all interrupts */ |
| 419 | out16r(usb_base_addr + USBINTR,0); |
| 420 | wait_ms(50); |
| 421 | out16r( usb_base_addr + USBCMD,0); |
| 422 | wait_ms(10); |
| 423 | } |
| 424 | |
| 425 | void start_hc(void) |
| 426 | { |
| 427 | int timeout = 1000; |
| 428 | |
| 429 | while(in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) { |
| 430 | if (!--timeout) { |
| 431 | printf("USBCMD_HCRESET timed out!\n"); |
| 432 | break; |
| 433 | } |
| 434 | } |
| 435 | /* Turn on all interrupts */ |
| 436 | out16r(usb_base_addr + USBINTR,USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP); |
| 437 | /* Start at frame 0 */ |
| 438 | out16r(usb_base_addr + USBFRNUM,0); |
| 439 | /* set Framebuffer base address */ |
| 440 | out32r(usb_base_addr+USBFLBASEADD,(unsigned long)&framelist); |
| 441 | /* Run and mark it configured with a 64-byte max packet */ |
| 442 | out16r(usb_base_addr + USBCMD,USBCMD_RS | USBCMD_CF | USBCMD_MAXP); |
| 443 | } |
| 444 | |
| 445 | /* Initialize the skeleton |
| 446 | */ |
| 447 | void usb_init_skel(void) |
| 448 | { |
| 449 | unsigned long temp; |
| 450 | int n; |
| 451 | |
| 452 | for(n=0;n<USB_MAX_TEMP_INT_TD;n++) |
| 453 | tmp_int_td[n].dev_ptr=0L; /* no devices connected */ |
| 454 | /* last td */ |
| 455 | usb_fill_td(&td_last,UHCI_PTR_TERM,TD_CTRL_IOC ,0,0,0L); |
| 456 | /* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */ |
| 457 | /* End Queue Header */ |
| 458 | usb_fill_qh(&qh_end,UHCI_PTR_TERM,(unsigned long)&td_last); |
| 459 | /* Bulk Queue Header */ |
| 460 | temp=(unsigned long)&qh_end; |
| 461 | usb_fill_qh(&qh_bulk,temp | UHCI_PTR_QH,UHCI_PTR_TERM); |
| 462 | /* Control Queue Header */ |
| 463 | temp=(unsigned long)&qh_bulk; |
| 464 | usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH,UHCI_PTR_TERM); |
| 465 | /* 1ms Interrupt td */ |
| 466 | temp=(unsigned long)&qh_cntrl; |
| 467 | usb_fill_td(&td_int[0],temp | UHCI_PTR_QH,0,0,0,0L); |
| 468 | temp=(unsigned long)&td_int[0]; |
| 469 | for(n=1; n<8; n++) |
| 470 | usb_fill_td(&td_int[n],temp,0,0,0,0L); |
| 471 | for (n = 0; n < 1024; n++) { |
| 472 | /* link all framelist pointers to one of the interrupts */ |
| 473 | int m, o; |
| 474 | if ((n&127)==127) |
| 475 | framelist[n]= swap_32((unsigned long)&td_int[0]); |
| 476 | else |
| 477 | for (o = 1, m = 2; m <= 128; o++, m += m) |
| 478 | if ((n & (m - 1)) == ((m - 1) / 2)) |
| 479 | framelist[n]= swap_32((unsigned long)&td_int[o]); |
| 480 | } |
| 481 | } |
| 482 | |
| 483 | /* check the common skeleton for completed transfers, and update the status |
| 484 | * of the "connected" device. Called from the IRQ routine. |
| 485 | */ |
| 486 | void usb_check_skel(void) |
| 487 | { |
| 488 | struct usb_device *dev; |
| 489 | /* start with the control qh */ |
| 490 | if(qh_cntrl.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */ |
| 491 | { |
| 492 | dev=(struct usb_device *)qh_cntrl.dev_ptr; |
| 493 | usb_get_td_status(&tmp_td[0],dev); /* update status */ |
| 494 | if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ |
| 495 | qh_cntrl.dev_ptr=0; |
| 496 | } |
| 497 | } |
| 498 | /* now process the bulk */ |
| 499 | if(qh_bulk.dev_ptr!=0) /* it's a device assigned check if this caused IRQ */ |
| 500 | { |
| 501 | dev=(struct usb_device *)qh_bulk.dev_ptr; |
| 502 | usb_get_td_status(&tmp_td[0],dev); /* update status */ |
| 503 | if(!(dev->status & USB_ST_NOT_PROC)) { /* is not active anymore, disconnect devices */ |
| 504 | qh_bulk.dev_ptr=0; |
| 505 | } |
| 506 | } |
| 507 | } |
| 508 | |
| 509 | /* check the interrupt chain, ubdate the status of the appropriate device, |
| 510 | * call the appropriate irqhandler and reactivate the TD if the irqhandler |
| 511 | * returns with 1 |
| 512 | */ |
| 513 | void usb_check_int_chain(void) |
| 514 | { |
| 515 | int i,res; |
| 516 | unsigned long link,status; |
| 517 | struct usb_device *dev; |
| 518 | uhci_td_t *td,*prevtd; |
| 519 | |
| 520 | for(i=0;i<8;i++) { |
| 521 | prevtd=&td_int[i]; /* the first previous td is the skeleton td */ |
| 522 | link=swap_32(td_int[i].link) & 0xfffffff0; /* next in chain */ |
| 523 | td=(uhci_td_t *)link; /* assign it */ |
| 524 | /* all interrupt TDs are finally linked to the td_int[0]. |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame^] | 525 | * so we process all until we find the td_int[0]. |
wdenk | 452cfd6 | 2002-11-19 11:04:11 +0000 | [diff] [blame] | 526 | * if int0 chain points to a QH, we're also done |
| 527 | */ |
| 528 | while(((i>0) && (link != (unsigned long)&td_int[0])) || |
| 529 | ((i==0) && !(swap_32(td->link) & UHCI_PTR_QH))) |
| 530 | { |
| 531 | /* check if a device is assigned with this td */ |
| 532 | status=swap_32(td->status); |
| 533 | if((td->dev_ptr!=0L) && !(status & TD_CTRL_ACTIVE)) { |
| 534 | /* td is not active and a device is assigned -> call irqhandler */ |
| 535 | dev=(struct usb_device *)td->dev_ptr; |
| 536 | dev->irq_act_len=((status & 0x7FF)==0x7FF) ? 0 : (status & 0x7FF) + 1; /* transfered length */ |
| 537 | dev->irq_status=usb_uhci_td_stat(status); /* get status */ |
| 538 | res=dev->irq_handle(dev); /* call irqhandler */ |
| 539 | if(res==1) { |
| 540 | /* reactivate */ |
| 541 | status|=TD_CTRL_ACTIVE; |
| 542 | td->status=swap_32(status); |
| 543 | prevtd=td; /* previous td = this td */ |
| 544 | } |
| 545 | else { |
| 546 | prevtd->link=td->link; /* link previous td directly to the nex td -> unlinked */ |
| 547 | /* remove device pointer */ |
| 548 | td->dev_ptr=0L; |
| 549 | } |
| 550 | } /* if we call the irq handler */ |
| 551 | link=swap_32(td->link) & 0xfffffff0; /* next in chain */ |
| 552 | td=(uhci_td_t *)link; /* assign it */ |
| 553 | } /* process all td in this int chain */ |
| 554 | } /* next interrupt chain */ |
| 555 | } |
| 556 | |
| 557 | |
| 558 | /* usb interrupt service routine. |
| 559 | */ |
| 560 | void handle_usb_interrupt(void) |
| 561 | { |
| 562 | unsigned short status; |
| 563 | |
| 564 | /* |
| 565 | * Read the interrupt status, and write it back to clear the |
| 566 | * interrupt cause |
| 567 | */ |
| 568 | |
| 569 | status = in16r(usb_base_addr + USBSTS); |
| 570 | |
| 571 | if (!status) /* shared interrupt, not mine */ |
| 572 | return; |
| 573 | if (status != 1) { |
| 574 | /* remove host controller halted state */ |
| 575 | if ((status&0x20) && ((in16r(usb_base_addr+USBCMD) && USBCMD_RS)==0)) { |
| 576 | out16r(usb_base_addr + USBCMD, USBCMD_RS | in16r(usb_base_addr + USBCMD)); |
| 577 | } |
| 578 | } |
| 579 | usb_check_int_chain(); /* call interrupt handlers for int tds */ |
| 580 | usb_check_skel(); /* call completion handler for common transfer routines */ |
| 581 | out16r(usb_base_addr+USBSTS,status); |
| 582 | } |
| 583 | |
| 584 | |
| 585 | /* init uhci |
| 586 | */ |
| 587 | int usb_lowlevel_init(void) |
| 588 | { |
| 589 | unsigned char temp; |
| 590 | int busdevfunc; |
| 591 | /* |
| 592 | * HJF - configure IRQ and base from variables optionally. |
| 593 | */ |
| 594 | char *s; |
| 595 | |
| 596 | |
| 597 | busdevfunc=pci_find_device(USB_UHCI_VEND_ID,USB_UHCI_DEV_ID,0); /* get PCI Device ID */ |
| 598 | if(busdevfunc==-1) { |
| 599 | printf("Error USB UHCI (%04X,%04X) not found\n",USB_UHCI_VEND_ID,USB_UHCI_DEV_ID); |
| 600 | return -1; |
| 601 | } |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 602 | |
wdenk | 452cfd6 | 2002-11-19 11:04:11 +0000 | [diff] [blame] | 603 | #if 1 |
| 604 | s = getenv("usb_irq"); |
| 605 | if (s) |
| 606 | { |
| 607 | temp = atoi(s); |
| 608 | pci_write_config_byte(busdevfunc, PCI_INTERRUPT_LINE, temp); |
| 609 | } |
| 610 | else |
| 611 | #endif |
| 612 | pci_read_config_byte(busdevfunc,PCI_INTERRUPT_LINE,&temp); |
| 613 | |
| 614 | s = getenv("usb_base"); |
| 615 | if (s) |
| 616 | { |
| 617 | unsigned long temp2; |
| 618 | temp2 = atoi(s); |
| 619 | pci_write_config_dword(busdevfunc, PCI_BASE_ADDRESS_4, temp2|0x01); |
| 620 | } |
| 621 | |
| 622 | irqvec = temp; |
| 623 | irq_free_handler(irqvec); |
| 624 | USB_UHCI_PRINTF("Interrupt Line = %d\n",irqvec); |
| 625 | pci_read_config_byte(busdevfunc,PCI_INTERRUPT_PIN,&temp); |
| 626 | USB_UHCI_PRINTF("Interrupt Pin = %ld\n",temp); |
| 627 | pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr); |
| 628 | USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr); |
| 629 | usb_base_addr&=0xFFFFFFF0; |
| 630 | usb_base_addr+=CFG_ISA_IO_BASE_ADDRESS; |
| 631 | rh.devnum = 0; |
| 632 | usb_init_skel(); |
| 633 | reset_hc(); |
| 634 | start_hc(); |
| 635 | irq_install_handler(irqvec, (interrupt_handler_t *)handle_usb_interrupt, NULL); |
| 636 | irq_install_handler(0, (interrupt_handler_t *)handle_usb_interrupt, NULL); |
| 637 | |
| 638 | return 0; |
| 639 | } |
| 640 | |
| 641 | /* stop uhci |
| 642 | */ |
| 643 | int usb_lowlevel_stop(void) |
| 644 | { |
| 645 | if(irqvec==-1) |
| 646 | return 1; |
| 647 | irq_free_handler(irqvec); |
| 648 | irq_free_handler(0); |
| 649 | reset_hc(); |
| 650 | irqvec=-1; |
| 651 | return 0; |
| 652 | } |
| 653 | |
| 654 | /******************************************************************************************* |
| 655 | * Virtual Root Hub |
| 656 | * Since the uhci does not have a real HUB, we simulate one ;-) |
| 657 | */ |
| 658 | #undef USB_RH_DEBUG |
| 659 | |
| 660 | #ifdef USB_RH_DEBUG |
| 661 | #define USB_RH_PRINTF(fmt,args...) printf (fmt ,##args) |
| 662 | static void usb_display_wValue(unsigned short wValue,unsigned short wIndex); |
| 663 | static void usb_display_Req(unsigned short req); |
| 664 | #else |
| 665 | #define USB_RH_PRINTF(fmt,args...) |
| 666 | static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) {} |
| 667 | static void usb_display_Req(unsigned short req) {} |
| 668 | #endif |
| 669 | |
| 670 | static unsigned char root_hub_dev_des[] = |
| 671 | { |
| 672 | 0x12, /* __u8 bLength; */ |
| 673 | 0x01, /* __u8 bDescriptorType; Device */ |
| 674 | 0x00, /* __u16 bcdUSB; v1.0 */ |
| 675 | 0x01, |
| 676 | 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ |
| 677 | 0x00, /* __u8 bDeviceSubClass; */ |
| 678 | 0x00, /* __u8 bDeviceProtocol; */ |
| 679 | 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ |
| 680 | 0x00, /* __u16 idVendor; */ |
| 681 | 0x00, |
| 682 | 0x00, /* __u16 idProduct; */ |
| 683 | 0x00, |
| 684 | 0x00, /* __u16 bcdDevice; */ |
| 685 | 0x00, |
| 686 | 0x01, /* __u8 iManufacturer; */ |
| 687 | 0x00, /* __u8 iProduct; */ |
| 688 | 0x00, /* __u8 iSerialNumber; */ |
| 689 | 0x01 /* __u8 bNumConfigurations; */ |
| 690 | }; |
| 691 | |
| 692 | |
| 693 | /* Configuration descriptor */ |
| 694 | static unsigned char root_hub_config_des[] = |
| 695 | { |
| 696 | 0x09, /* __u8 bLength; */ |
| 697 | 0x02, /* __u8 bDescriptorType; Configuration */ |
| 698 | 0x19, /* __u16 wTotalLength; */ |
| 699 | 0x00, |
| 700 | 0x01, /* __u8 bNumInterfaces; */ |
| 701 | 0x01, /* __u8 bConfigurationValue; */ |
| 702 | 0x00, /* __u8 iConfiguration; */ |
| 703 | 0x40, /* __u8 bmAttributes; |
| 704 | Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */ |
| 705 | 0x00, /* __u8 MaxPower; */ |
| 706 | |
| 707 | /* interface */ |
| 708 | 0x09, /* __u8 if_bLength; */ |
| 709 | 0x04, /* __u8 if_bDescriptorType; Interface */ |
| 710 | 0x00, /* __u8 if_bInterfaceNumber; */ |
| 711 | 0x00, /* __u8 if_bAlternateSetting; */ |
| 712 | 0x01, /* __u8 if_bNumEndpoints; */ |
| 713 | 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ |
| 714 | 0x00, /* __u8 if_bInterfaceSubClass; */ |
| 715 | 0x00, /* __u8 if_bInterfaceProtocol; */ |
| 716 | 0x00, /* __u8 if_iInterface; */ |
| 717 | |
| 718 | /* endpoint */ |
| 719 | 0x07, /* __u8 ep_bLength; */ |
| 720 | 0x05, /* __u8 ep_bDescriptorType; Endpoint */ |
| 721 | 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ |
| 722 | 0x03, /* __u8 ep_bmAttributes; Interrupt */ |
| 723 | 0x08, /* __u16 ep_wMaxPacketSize; 8 Bytes */ |
| 724 | 0x00, |
| 725 | 0xff /* __u8 ep_bInterval; 255 ms */ |
| 726 | }; |
| 727 | |
| 728 | |
| 729 | static unsigned char root_hub_hub_des[] = |
| 730 | { |
| 731 | 0x09, /* __u8 bLength; */ |
| 732 | 0x29, /* __u8 bDescriptorType; Hub-descriptor */ |
| 733 | 0x02, /* __u8 bNbrPorts; */ |
| 734 | 0x00, /* __u16 wHubCharacteristics; */ |
| 735 | 0x00, |
| 736 | 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ |
| 737 | 0x00, /* __u8 bHubContrCurrent; 0 mA */ |
| 738 | 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ |
| 739 | 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ |
| 740 | }; |
| 741 | |
| 742 | static unsigned char root_hub_str_index0[] = |
| 743 | { |
| 744 | 0x04, /* __u8 bLength; */ |
| 745 | 0x03, /* __u8 bDescriptorType; String-descriptor */ |
| 746 | 0x09, /* __u8 lang ID */ |
| 747 | 0x04, /* __u8 lang ID */ |
| 748 | }; |
| 749 | |
| 750 | static unsigned char root_hub_str_index1[] = |
| 751 | { |
| 752 | 28, /* __u8 bLength; */ |
| 753 | 0x03, /* __u8 bDescriptorType; String-descriptor */ |
| 754 | 'U', /* __u8 Unicode */ |
| 755 | 0, /* __u8 Unicode */ |
| 756 | 'H', /* __u8 Unicode */ |
| 757 | 0, /* __u8 Unicode */ |
| 758 | 'C', /* __u8 Unicode */ |
| 759 | 0, /* __u8 Unicode */ |
| 760 | 'I', /* __u8 Unicode */ |
| 761 | 0, /* __u8 Unicode */ |
| 762 | ' ', /* __u8 Unicode */ |
| 763 | 0, /* __u8 Unicode */ |
| 764 | 'R', /* __u8 Unicode */ |
| 765 | 0, /* __u8 Unicode */ |
| 766 | 'o', /* __u8 Unicode */ |
| 767 | 0, /* __u8 Unicode */ |
| 768 | 'o', /* __u8 Unicode */ |
| 769 | 0, /* __u8 Unicode */ |
| 770 | 't', /* __u8 Unicode */ |
| 771 | 0, /* __u8 Unicode */ |
| 772 | ' ', /* __u8 Unicode */ |
| 773 | 0, /* __u8 Unicode */ |
| 774 | 'H', /* __u8 Unicode */ |
| 775 | 0, /* __u8 Unicode */ |
| 776 | 'u', /* __u8 Unicode */ |
| 777 | 0, /* __u8 Unicode */ |
| 778 | 'b', /* __u8 Unicode */ |
| 779 | 0, /* __u8 Unicode */ |
| 780 | }; |
| 781 | |
| 782 | |
| 783 | /* |
| 784 | * Root Hub Control Pipe (interrupt Pipes are not supported) |
| 785 | */ |
| 786 | |
| 787 | |
| 788 | int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len,struct devrequest *cmd) |
| 789 | { |
| 790 | void *data = buffer; |
| 791 | int leni = transfer_len; |
| 792 | int len = 0; |
| 793 | int status = 0; |
| 794 | int stat = 0; |
| 795 | int i; |
| 796 | |
| 797 | unsigned short cstatus; |
| 798 | |
| 799 | unsigned short bmRType_bReq; |
| 800 | unsigned short wValue; |
| 801 | unsigned short wIndex; |
| 802 | unsigned short wLength; |
| 803 | |
| 804 | if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) { |
| 805 | printf("Root-Hub submit IRQ: NOT implemented\n"); |
| 806 | #if 0 |
| 807 | uhci->rh.urb = urb; |
| 808 | uhci->rh.send = 1; |
| 809 | uhci->rh.interval = urb->interval; |
| 810 | rh_init_int_timer (urb); |
| 811 | #endif |
| 812 | return 0; |
| 813 | } |
| 814 | bmRType_bReq = cmd->requesttype | cmd->request << 8; |
| 815 | wValue = swap_16(cmd->value); |
| 816 | wIndex = swap_16(cmd->index); |
| 817 | wLength = swap_16(cmd->length); |
| 818 | usb_display_Req(bmRType_bReq); |
| 819 | for (i = 0; i < 8; i++) |
| 820 | rh.c_p_r[i] = 0; |
| 821 | USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n", |
| 822 | dev->devnum, 8, cmd->requesttype,cmd->request, wValue, wIndex, wLength); |
| 823 | |
| 824 | switch (bmRType_bReq) { |
| 825 | /* Request Destination: |
| 826 | without flags: Device, |
| 827 | RH_INTERFACE: interface, |
| 828 | RH_ENDPOINT: endpoint, |
| 829 | RH_CLASS means HUB here, |
| 830 | RH_OTHER | RH_CLASS almost ever means HUB_PORT here |
| 831 | */ |
| 832 | |
| 833 | case RH_GET_STATUS: |
| 834 | *(unsigned short *) data = swap_16(1); |
| 835 | len=2; |
| 836 | break; |
| 837 | case RH_GET_STATUS | RH_INTERFACE: |
| 838 | *(unsigned short *) data = swap_16(0); |
| 839 | len=2; |
| 840 | break; |
| 841 | case RH_GET_STATUS | RH_ENDPOINT: |
| 842 | *(unsigned short *) data = swap_16(0); |
| 843 | len=2; |
| 844 | break; |
| 845 | case RH_GET_STATUS | RH_CLASS: |
| 846 | *(unsigned long *) data = swap_32(0); |
| 847 | len=4; |
| 848 | break; /* hub power ** */ |
| 849 | case RH_GET_STATUS | RH_OTHER | RH_CLASS: |
| 850 | |
| 851 | status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1)); |
| 852 | cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) | |
| 853 | ((status & USBPORTSC_PEC) >> (3 - 1)) | |
| 854 | (rh.c_p_r[wIndex - 1] << (0 + 4)); |
| 855 | status = (status & USBPORTSC_CCS) | |
| 856 | ((status & USBPORTSC_PE) >> (2 - 1)) | |
| 857 | ((status & USBPORTSC_SUSP) >> (12 - 2)) | |
| 858 | ((status & USBPORTSC_PR) >> (9 - 4)) | |
| 859 | (1 << 8) | /* power on ** */ |
| 860 | ((status & USBPORTSC_LSDA) << (-8 + 9)); |
| 861 | |
| 862 | *(unsigned short *) data = swap_16(status); |
| 863 | *(unsigned short *) (data + 2) = swap_16(cstatus); |
| 864 | len=4; |
| 865 | break; |
| 866 | case RH_CLEAR_FEATURE | RH_ENDPOINT: |
| 867 | switch (wValue) { |
| 868 | case (RH_ENDPOINT_STALL): |
| 869 | len=0; |
| 870 | break; |
| 871 | } |
| 872 | break; |
| 873 | |
| 874 | case RH_CLEAR_FEATURE | RH_CLASS: |
| 875 | switch (wValue) { |
| 876 | case (RH_C_HUB_OVER_CURRENT): |
| 877 | len=0; /* hub power over current ** */ |
| 878 | break; |
| 879 | } |
| 880 | break; |
| 881 | |
| 882 | case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: |
| 883 | usb_display_wValue(wValue,wIndex); |
| 884 | switch (wValue) { |
| 885 | case (RH_PORT_ENABLE): |
| 886 | status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); |
| 887 | status = (status & 0xfff5) & ~USBPORTSC_PE; |
| 888 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 889 | len=0; |
| 890 | break; |
| 891 | case (RH_PORT_SUSPEND): |
| 892 | status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); |
| 893 | status = (status & 0xfff5) & ~USBPORTSC_SUSP; |
| 894 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 895 | len=0; |
| 896 | break; |
| 897 | case (RH_PORT_POWER): |
| 898 | len=0; /* port power ** */ |
| 899 | break; |
| 900 | case (RH_C_PORT_CONNECTION): |
| 901 | status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); |
| 902 | status = (status & 0xfff5) | USBPORTSC_CSC; |
| 903 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 904 | len=0; |
| 905 | break; |
| 906 | case (RH_C_PORT_ENABLE): |
| 907 | status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); |
| 908 | status = (status & 0xfff5) | USBPORTSC_PEC; |
| 909 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 910 | len=0; |
| 911 | break; |
| 912 | case (RH_C_PORT_SUSPEND): |
| 913 | /*** WR_RH_PORTSTAT(RH_PS_PSSC); */ |
| 914 | len=0; |
| 915 | break; |
| 916 | case (RH_C_PORT_OVER_CURRENT): |
| 917 | len=0; |
| 918 | break; |
| 919 | case (RH_C_PORT_RESET): |
| 920 | rh.c_p_r[wIndex - 1] = 0; |
| 921 | len=0; |
| 922 | break; |
| 923 | } |
| 924 | break; |
| 925 | case RH_SET_FEATURE | RH_OTHER | RH_CLASS: |
| 926 | usb_display_wValue(wValue,wIndex); |
| 927 | switch (wValue) { |
| 928 | case (RH_PORT_SUSPEND): |
| 929 | status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); |
| 930 | status = (status & 0xfff5) | USBPORTSC_SUSP; |
| 931 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 932 | len=0; |
| 933 | break; |
| 934 | case (RH_PORT_RESET): |
| 935 | status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); |
| 936 | status = (status & 0xfff5) | USBPORTSC_PR; |
| 937 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 938 | wait_ms(10); |
| 939 | status = (status & 0xfff5) & ~USBPORTSC_PR; |
| 940 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 941 | udelay(10); |
| 942 | status = (status & 0xfff5) | USBPORTSC_PE; |
| 943 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 944 | wait_ms(10); |
| 945 | status = (status & 0xfff5) | 0xa; |
| 946 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 947 | len=0; |
| 948 | break; |
| 949 | case (RH_PORT_POWER): |
| 950 | len=0; /* port power ** */ |
| 951 | break; |
| 952 | case (RH_PORT_ENABLE): |
| 953 | status = in16r(usb_base_addr+USBPORTSC1+2*(wIndex-1)); |
| 954 | status = (status & 0xfff5) | USBPORTSC_PE; |
| 955 | out16r(usb_base_addr+USBPORTSC1+2*(wIndex-1),status); |
| 956 | len=0; |
| 957 | break; |
| 958 | } |
| 959 | break; |
| 960 | |
| 961 | case RH_SET_ADDRESS: |
| 962 | rh.devnum = wValue; |
| 963 | len=0; |
| 964 | break; |
| 965 | case RH_GET_DESCRIPTOR: |
| 966 | switch ((wValue & 0xff00) >> 8) { |
| 967 | case (0x01): /* device descriptor */ |
| 968 | i=sizeof(root_hub_config_des); |
| 969 | status=i > wLength ? wLength : i; |
| 970 | len = leni > status ? status : leni; |
| 971 | memcpy (data, root_hub_dev_des, len); |
| 972 | break; |
| 973 | case (0x02): /* configuration descriptor */ |
| 974 | i=sizeof(root_hub_config_des); |
| 975 | status=i > wLength ? wLength : i; |
| 976 | len = leni > status ? status : leni; |
| 977 | memcpy (data, root_hub_config_des, len); |
| 978 | break; |
| 979 | case (0x03): /*string descriptors */ |
| 980 | if(wValue==0x0300) { |
| 981 | i=sizeof(root_hub_str_index0); |
| 982 | status = i > wLength ? wLength : i; |
| 983 | len = leni > status ? status : leni; |
| 984 | memcpy (data, root_hub_str_index0, len); |
| 985 | break; |
| 986 | } |
| 987 | if(wValue==0x0301) { |
| 988 | i=sizeof(root_hub_str_index1); |
| 989 | status = i > wLength ? wLength : i; |
| 990 | len = leni > status ? status : leni; |
| 991 | memcpy (data, root_hub_str_index1, len); |
| 992 | break; |
| 993 | } |
| 994 | stat = USB_ST_STALLED; |
| 995 | } |
| 996 | break; |
| 997 | |
| 998 | case RH_GET_DESCRIPTOR | RH_CLASS: |
| 999 | root_hub_hub_des[2] = 2; |
| 1000 | i=sizeof(root_hub_hub_des); |
| 1001 | status= i > wLength ? wLength : i; |
| 1002 | len = leni > status ? status : leni; |
| 1003 | memcpy (data, root_hub_hub_des, len); |
| 1004 | break; |
| 1005 | case RH_GET_CONFIGURATION: |
| 1006 | *(unsigned char *) data = 0x01; |
| 1007 | len = 1; |
| 1008 | break; |
| 1009 | case RH_SET_CONFIGURATION: |
| 1010 | len=0; |
| 1011 | break; |
| 1012 | default: |
| 1013 | stat = USB_ST_STALLED; |
| 1014 | } |
| 1015 | USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n",stat, |
| 1016 | in16r(usb_base_addr + USBPORTSC1), in16r(usb_base_addr + USBPORTSC2)); |
| 1017 | dev->act_len=len; |
| 1018 | dev->status=stat; |
| 1019 | return stat; |
| 1020 | |
| 1021 | } |
| 1022 | |
| 1023 | /******************************************************************************** |
| 1024 | * Some Debug Routines |
| 1025 | */ |
| 1026 | |
| 1027 | #ifdef USB_RH_DEBUG |
| 1028 | |
| 1029 | static void usb_display_Req(unsigned short req) |
| 1030 | { |
| 1031 | USB_RH_PRINTF("- Root-Hub Request: "); |
| 1032 | switch (req) { |
| 1033 | case RH_GET_STATUS: |
| 1034 | USB_RH_PRINTF("Get Status "); |
| 1035 | break; |
| 1036 | case RH_GET_STATUS | RH_INTERFACE: |
| 1037 | USB_RH_PRINTF("Get Status Interface "); |
| 1038 | break; |
| 1039 | case RH_GET_STATUS | RH_ENDPOINT: |
| 1040 | USB_RH_PRINTF("Get Status Endpoint "); |
| 1041 | break; |
| 1042 | case RH_GET_STATUS | RH_CLASS: |
| 1043 | USB_RH_PRINTF("Get Status Class"); |
| 1044 | break; /* hub power ** */ |
| 1045 | case RH_GET_STATUS | RH_OTHER | RH_CLASS: |
| 1046 | USB_RH_PRINTF("Get Status Class Others"); |
| 1047 | break; |
| 1048 | case RH_CLEAR_FEATURE | RH_ENDPOINT: |
| 1049 | USB_RH_PRINTF("Clear Feature Endpoint "); |
| 1050 | break; |
| 1051 | case RH_CLEAR_FEATURE | RH_CLASS: |
| 1052 | USB_RH_PRINTF("Clear Feature Class "); |
| 1053 | break; |
| 1054 | case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: |
| 1055 | USB_RH_PRINTF("Clear Feature Other Class "); |
| 1056 | break; |
| 1057 | case RH_SET_FEATURE | RH_OTHER | RH_CLASS: |
| 1058 | USB_RH_PRINTF("Set Feature Other Class "); |
| 1059 | break; |
| 1060 | case RH_SET_ADDRESS: |
| 1061 | USB_RH_PRINTF("Set Address "); |
| 1062 | break; |
| 1063 | case RH_GET_DESCRIPTOR: |
| 1064 | USB_RH_PRINTF("Get Descriptor "); |
| 1065 | break; |
| 1066 | case RH_GET_DESCRIPTOR | RH_CLASS: |
| 1067 | USB_RH_PRINTF("Get Descriptor Class "); |
| 1068 | break; |
| 1069 | case RH_GET_CONFIGURATION: |
| 1070 | USB_RH_PRINTF("Get Configuration "); |
| 1071 | break; |
| 1072 | case RH_SET_CONFIGURATION: |
| 1073 | USB_RH_PRINTF("Get Configuration "); |
| 1074 | break; |
| 1075 | default: |
| 1076 | USB_RH_PRINTF("****UNKNOWN**** 0x%04X ",req); |
| 1077 | } |
| 1078 | USB_RH_PRINTF("\n"); |
| 1079 | |
| 1080 | } |
| 1081 | |
| 1082 | static void usb_display_wValue(unsigned short wValue,unsigned short wIndex) |
| 1083 | { |
| 1084 | switch (wValue) { |
| 1085 | case (RH_PORT_ENABLE): |
| 1086 | USB_RH_PRINTF("Root-Hub: Enable Port %d\n",wIndex); |
| 1087 | break; |
| 1088 | case (RH_PORT_SUSPEND): |
| 1089 | USB_RH_PRINTF("Root-Hub: Suspend Port %d\n",wIndex); |
| 1090 | break; |
| 1091 | case (RH_PORT_POWER): |
| 1092 | USB_RH_PRINTF("Root-Hub: Port Power %d\n",wIndex); |
| 1093 | break; |
| 1094 | case (RH_C_PORT_CONNECTION): |
| 1095 | USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n",wIndex); |
| 1096 | break; |
| 1097 | case (RH_C_PORT_ENABLE): |
| 1098 | USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n",wIndex); |
| 1099 | break; |
| 1100 | case (RH_C_PORT_SUSPEND): |
| 1101 | USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n",wIndex); |
| 1102 | break; |
| 1103 | case (RH_C_PORT_OVER_CURRENT): |
| 1104 | USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",wIndex); |
| 1105 | break; |
| 1106 | case (RH_C_PORT_RESET): |
| 1107 | USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n",wIndex); |
| 1108 | break; |
| 1109 | default: |
| 1110 | USB_RH_PRINTF("Root-Hub: unknown %x %x\n",wValue,wIndex); |
| 1111 | break; |
| 1112 | } |
| 1113 | } |
| 1114 | |
| 1115 | #endif |
| 1116 | |
| 1117 | |
wdenk | 452cfd6 | 2002-11-19 11:04:11 +0000 | [diff] [blame] | 1118 | #ifdef USB_UHCI_DEBUG |
| 1119 | |
| 1120 | static int usb_display_td(uhci_td_t *td) |
| 1121 | { |
| 1122 | unsigned long tmp; |
| 1123 | int valid; |
| 1124 | |
| 1125 | printf("TD at %p:\n",td); |
| 1126 | |
| 1127 | tmp=swap_32(td->link); |
| 1128 | printf("Link points to 0x%08lX, %s first, %s, %s\n",tmp&0xfffffff0, |
| 1129 | ((tmp & 0x4)==0x4) ? "Depth" : "Breath", |
| 1130 | ((tmp & 0x2)==0x2) ? "QH" : "TD", |
| 1131 | ((tmp & 0x1)==0x1) ? "invalid" : "valid"); |
| 1132 | valid=((tmp & 0x1)==0x0); |
| 1133 | tmp=swap_32(td->status); |
| 1134 | printf(" %s %ld Errors %s %s %s \n %s %s %s %s %s %s\n Len 0x%lX\n", |
| 1135 | (((tmp>>29)&0x1)==0x1) ? "SPD Enable" : "SPD Disable", |
| 1136 | ((tmp>>28)&0x3), |
| 1137 | (((tmp>>26)&0x1)==0x1) ? "Low Speed" : "Full Speed", |
| 1138 | (((tmp>>25)&0x1)==0x1) ? "ISO " : "", |
| 1139 | (((tmp>>24)&0x1)==0x1) ? "IOC " : "", |
| 1140 | (((tmp>>23)&0x1)==0x1) ? "Active " : "Inactive ", |
| 1141 | (((tmp>>22)&0x1)==0x1) ? "Stalled" : "", |
| 1142 | (((tmp>>21)&0x1)==0x1) ? "Data Buffer Error" : "", |
| 1143 | (((tmp>>20)&0x1)==0x1) ? "Babble" : "", |
| 1144 | (((tmp>>19)&0x1)==0x1) ? "NAK" : "", |
| 1145 | (((tmp>>18)&0x1)==0x1) ? "Bitstuff Error" : "", |
| 1146 | (tmp&0x7ff)); |
| 1147 | tmp=swap_32(td->info); |
| 1148 | printf(" MaxLen 0x%lX\n",((tmp>>21)&0x7FF)); |
| 1149 | printf(" %s Endpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",((tmp>>19)&0x1)==0x1 ? "TOGGLE" : "", |
| 1150 | ((tmp>>15)&0xF),((tmp>>8)&0x7F),tmp&0xFF); |
| 1151 | tmp=swap_32(td->buffer); |
| 1152 | printf(" Buffer 0x%08lX\n",tmp); |
| 1153 | printf(" DEV %08lX\n",td->dev_ptr); |
| 1154 | return valid; |
| 1155 | } |
| 1156 | |
| 1157 | |
| 1158 | void usb_show_td(int max) |
| 1159 | { |
| 1160 | int i; |
| 1161 | if(max>0) { |
| 1162 | for(i=0;i<max;i++) { |
| 1163 | usb_display_td(&tmp_td[i]); |
| 1164 | } |
| 1165 | } |
| 1166 | else { |
| 1167 | i=0; |
| 1168 | do { |
| 1169 | printf("tmp_td[%d]\n",i); |
| 1170 | }while(usb_display_td(&tmp_td[i++])); |
| 1171 | } |
| 1172 | } |
| 1173 | |
| 1174 | |
| 1175 | #endif |
| 1176 | #endif /* CONFIG_USB_UHCI */ |
| 1177 | |
| 1178 | /* EOF */ |