| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 | /* |
| 3 | * IPQ6018 CP01 board device tree source |
| 4 | * |
| 5 | * Copyright (c) 2019, The Linux Foundation. All rights reserved. |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include "ipq6018.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1"; |
| 14 | compatible = "qcom,ipq6018-cp01", "qcom,ipq6018"; |
| 15 | |
| 16 | aliases { |
| 17 | serial0 = &blsp1_uart3; |
| 18 | }; |
| 19 | |
| 20 | chosen { |
| 21 | stdout-path = "serial0:115200n8"; |
| 22 | }; |
| 23 | }; |
| 24 | |
| 25 | &blsp1_uart3 { |
| 26 | pinctrl-0 = <&serial_3_pins>; |
| 27 | pinctrl-names = "default"; |
| 28 | status = "okay"; |
| 29 | }; |
| 30 | |
| 31 | &blsp1_i2c3 { |
| 32 | pinctrl-0 = <&i2c_1_pins>; |
| 33 | pinctrl-names = "default"; |
| 34 | status = "okay"; |
| 35 | }; |
| 36 | |
| 37 | &blsp1_spi1 { |
| 38 | pinctrl-0 = <&spi_0_pins>; |
| 39 | pinctrl-names = "default"; |
| 40 | status = "okay"; |
| 41 | |
| 42 | flash@0 { |
| 43 | #address-cells = <1>; |
| 44 | #size-cells = <1>; |
| 45 | reg = <0>; |
| 46 | compatible = "micron,n25q128a11", "jedec,spi-nor"; |
| 47 | spi-max-frequency = <50000000>; |
| 48 | }; |
| 49 | }; |
| 50 | |
| 51 | &tlmm { |
| 52 | i2c_1_pins: i2c-1-state { |
| 53 | pins = "gpio42", "gpio43"; |
| 54 | function = "blsp2_i2c"; |
| 55 | drive-strength = <8>; |
| 56 | }; |
| 57 | |
| 58 | spi_0_pins: spi-0-state { |
| 59 | pins = "gpio38", "gpio39", "gpio40", "gpio41"; |
| 60 | function = "blsp0_spi"; |
| 61 | drive-strength = <8>; |
| 62 | bias-pull-down; |
| 63 | }; |
| 64 | }; |
| 65 | |
| 66 | &qpic_bam { |
| 67 | status = "okay"; |
| 68 | }; |
| 69 | |
| 70 | &qpic_nand { |
| 71 | status = "okay"; |
| 72 | |
| 73 | nand@0 { |
| 74 | reg = <0>; |
| 75 | |
| 76 | nand-ecc-strength = <4>; |
| 77 | nand-ecc-step-size = <512>; |
| 78 | nand-bus-width = <8>; |
| 79 | }; |
| 80 | }; |
| 81 | |
| 82 | &qusb_phy_1 { |
| 83 | status = "okay"; |
| 84 | }; |
| 85 | |
| 86 | &usb2 { |
| 87 | status = "okay"; |
| 88 | }; |