| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC |
| 4 | * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC |
| 5 | * |
| 6 | * Copyright (C) 2013 Atmel, |
| 7 | * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> |
| 8 | */ |
| 9 | |
| 10 | #include <dt-bindings/dma/at91.h> |
| 11 | #include <dt-bindings/pinctrl/at91.h> |
| 12 | #include <dt-bindings/interrupt-controller/irq.h> |
| 13 | #include <dt-bindings/gpio/gpio.h> |
| 14 | #include <dt-bindings/clock/at91.h> |
| 15 | #include <dt-bindings/mfd/at91-usart.h> |
| 16 | |
| 17 | / { |
| 18 | #address-cells = <1>; |
| 19 | #size-cells = <1>; |
| 20 | model = "Atmel SAMA5D3 family SoC"; |
| 21 | compatible = "atmel,sama5d3", "atmel,sama5"; |
| 22 | interrupt-parent = <&aic>; |
| 23 | |
| 24 | aliases { |
| 25 | serial0 = &dbgu; |
| 26 | serial1 = &usart0; |
| 27 | serial2 = &usart1; |
| 28 | serial3 = &usart2; |
| 29 | serial4 = &usart3; |
| 30 | serial5 = &uart0; |
| 31 | gpio0 = &pioA; |
| 32 | gpio1 = &pioB; |
| 33 | gpio2 = &pioC; |
| 34 | gpio3 = &pioD; |
| 35 | gpio4 = &pioE; |
| 36 | tcb0 = &tcb0; |
| 37 | i2c0 = &i2c0; |
| 38 | i2c1 = &i2c1; |
| 39 | i2c2 = &i2c2; |
| 40 | ssc0 = &ssc0; |
| 41 | ssc1 = &ssc1; |
| 42 | pwm0 = &pwm0; |
| 43 | }; |
| 44 | cpus { |
| 45 | #address-cells = <1>; |
| 46 | #size-cells = <0>; |
| 47 | cpu@0 { |
| 48 | device_type = "cpu"; |
| 49 | compatible = "arm,cortex-a5"; |
| 50 | reg = <0x0>; |
| 51 | }; |
| 52 | }; |
| 53 | |
| 54 | pmu { |
| 55 | compatible = "arm,cortex-a5-pmu"; |
| 56 | interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>; |
| 57 | }; |
| 58 | |
| 59 | memory@20000000 { |
| 60 | device_type = "memory"; |
| 61 | reg = <0x20000000 0x8000000>; |
| 62 | }; |
| 63 | |
| 64 | clocks { |
| 65 | slow_xtal: slow_xtal { |
| 66 | compatible = "fixed-clock"; |
| 67 | #clock-cells = <0>; |
| 68 | clock-frequency = <0>; |
| 69 | }; |
| 70 | |
| 71 | main_xtal: main_xtal { |
| 72 | compatible = "fixed-clock"; |
| 73 | #clock-cells = <0>; |
| 74 | clock-frequency = <0>; |
| 75 | }; |
| 76 | |
| 77 | adc_op_clk: adc_op_clk { |
| 78 | compatible = "fixed-clock"; |
| 79 | #clock-cells = <0>; |
| 80 | clock-frequency = <1000000>; |
| 81 | }; |
| 82 | }; |
| 83 | |
| 84 | sram: sram@300000 { |
| 85 | compatible = "mmio-sram"; |
| 86 | reg = <0x00300000 0x20000>; |
| 87 | #address-cells = <1>; |
| 88 | #size-cells = <1>; |
| 89 | ranges = <0 0x00300000 0x20000>; |
| 90 | }; |
| 91 | |
| 92 | ahb { |
| 93 | compatible = "simple-bus"; |
| 94 | #address-cells = <1>; |
| 95 | #size-cells = <1>; |
| 96 | ranges; |
| 97 | |
| 98 | apb { |
| 99 | compatible = "simple-bus"; |
| 100 | #address-cells = <1>; |
| 101 | #size-cells = <1>; |
| 102 | ranges; |
| 103 | |
| 104 | mmc0: mmc@f0000000 { |
| 105 | compatible = "atmel,hsmci"; |
| 106 | reg = <0xf0000000 0x600>; |
| 107 | interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; |
| 108 | dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>; |
| 109 | dma-names = "rxtx"; |
| 110 | pinctrl-names = "default"; |
| 111 | pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; |
| 112 | status = "disabled"; |
| 113 | #address-cells = <1>; |
| 114 | #size-cells = <0>; |
| 115 | clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; |
| 116 | clock-names = "mci_clk"; |
| 117 | }; |
| 118 | |
| 119 | spi0: spi@f0004000 { |
| 120 | #address-cells = <1>; |
| 121 | #size-cells = <0>; |
| 122 | compatible = "atmel,at91rm9200-spi"; |
| 123 | reg = <0xf0004000 0x100>; |
| 124 | interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; |
| 125 | dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>, |
| 126 | <&dma0 2 AT91_DMA_CFG_PER_ID(2)>; |
| 127 | dma-names = "tx", "rx"; |
| 128 | pinctrl-names = "default"; |
| 129 | pinctrl-0 = <&pinctrl_spi0>; |
| 130 | clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; |
| 131 | clock-names = "spi_clk"; |
| 132 | status = "disabled"; |
| 133 | }; |
| 134 | |
| 135 | ssc0: ssc@f0008000 { |
| 136 | compatible = "atmel,at91sam9g45-ssc"; |
| 137 | reg = <0xf0008000 0x4000>; |
| 138 | interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; |
| 139 | dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>, |
| 140 | <&dma0 2 AT91_DMA_CFG_PER_ID(14)>; |
| 141 | dma-names = "tx", "rx"; |
| 142 | pinctrl-names = "default"; |
| 143 | pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; |
| 144 | clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| 145 | clock-names = "pclk"; |
| 146 | status = "disabled"; |
| 147 | }; |
| 148 | |
| 149 | tcb0: timer@f0010000 { |
| 150 | compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; |
| 151 | #address-cells = <1>; |
| 152 | #size-cells = <0>; |
| 153 | reg = <0xf0010000 0x100>; |
| 154 | interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; |
| 155 | clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>; |
| 156 | clock-names = "t0_clk", "slow_clk"; |
| 157 | }; |
| 158 | |
| 159 | i2c0: i2c@f0014000 { |
| 160 | compatible = "atmel,at91sam9x5-i2c"; |
| 161 | reg = <0xf0014000 0x4000>; |
| 162 | interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>; |
| 163 | dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>, |
| 164 | <&dma0 2 AT91_DMA_CFG_PER_ID(8)>; |
| 165 | dma-names = "tx", "rx"; |
| 166 | pinctrl-names = "default", "gpio"; |
| 167 | pinctrl-0 = <&pinctrl_i2c0>; |
| 168 | pinctrl-1 = <&pinctrl_i2c0_gpio>; |
| 169 | sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; |
| 170 | scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 171 | #address-cells = <1>; |
| 172 | #size-cells = <0>; |
| 173 | clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; |
| 174 | status = "disabled"; |
| 175 | }; |
| 176 | |
| 177 | i2c1: i2c@f0018000 { |
| 178 | compatible = "atmel,at91sam9x5-i2c"; |
| 179 | reg = <0xf0018000 0x4000>; |
| 180 | interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>; |
| 181 | dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>, |
| 182 | <&dma0 2 AT91_DMA_CFG_PER_ID(10)>; |
| 183 | dma-names = "tx", "rx"; |
| 184 | pinctrl-names = "default", "gpio"; |
| 185 | pinctrl-0 = <&pinctrl_i2c1>; |
| 186 | pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| 187 | sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>; |
| 188 | scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 189 | #address-cells = <1>; |
| 190 | #size-cells = <0>; |
| 191 | clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; |
| 192 | status = "disabled"; |
| 193 | }; |
| 194 | |
| 195 | usart0: serial@f001c000 { |
| 196 | compatible = "atmel,at91sam9260-usart"; |
| 197 | reg = <0xf001c000 0x100>; |
| 198 | atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 199 | interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; |
| 200 | dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, |
| 201 | <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| 202 | dma-names = "tx", "rx"; |
| 203 | pinctrl-names = "default"; |
| 204 | pinctrl-0 = <&pinctrl_usart0>; |
| 205 | clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; |
| 206 | clock-names = "usart"; |
| 207 | status = "disabled"; |
| 208 | }; |
| 209 | |
| 210 | usart1: serial@f0020000 { |
| 211 | compatible = "atmel,at91sam9260-usart"; |
| 212 | reg = <0xf0020000 0x100>; |
| 213 | atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 214 | interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>; |
| 215 | dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>, |
| 216 | <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| 217 | dma-names = "tx", "rx"; |
| 218 | pinctrl-names = "default"; |
| 219 | pinctrl-0 = <&pinctrl_usart1>; |
| 220 | clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; |
| 221 | clock-names = "usart"; |
| 222 | status = "disabled"; |
| 223 | }; |
| 224 | |
| 225 | uart0: serial@f0024000 { |
| 226 | compatible = "atmel,at91sam9260-usart"; |
| 227 | reg = <0xf0024000 0x100>; |
| 228 | atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 229 | interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; |
| 230 | pinctrl-names = "default"; |
| 231 | pinctrl-0 = <&pinctrl_uart0>; |
| 232 | clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; |
| 233 | clock-names = "usart"; |
| 234 | status = "disabled"; |
| 235 | }; |
| 236 | |
| 237 | pwm0: pwm@f002c000 { |
| 238 | compatible = "atmel,sama5d3-pwm"; |
| 239 | reg = <0xf002c000 0x300>; |
| 240 | interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; |
| 241 | #pwm-cells = <3>; |
| 242 | clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; |
| 243 | status = "disabled"; |
| 244 | }; |
| 245 | |
| 246 | isi: isi@f0034000 { |
| 247 | compatible = "atmel,at91sam9g45-isi"; |
| 248 | reg = <0xf0034000 0x4000>; |
| 249 | interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; |
| 250 | pinctrl-names = "default"; |
| 251 | pinctrl-0 = <&pinctrl_isi_data_0_7>; |
| 252 | clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; |
| 253 | clock-names = "isi_clk"; |
| 254 | status = "disabled"; |
| 255 | port { |
| 256 | #address-cells = <1>; |
| 257 | #size-cells = <0>; |
| 258 | }; |
| 259 | }; |
| 260 | |
| 261 | sfr: sfr@f0038000 { |
| 262 | compatible = "atmel,sama5d3-sfr", "syscon"; |
| 263 | reg = <0xf0038000 0x60>; |
| 264 | }; |
| 265 | |
| 266 | mmc1: mmc@f8000000 { |
| 267 | compatible = "atmel,hsmci"; |
| 268 | reg = <0xf8000000 0x600>; |
| 269 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>; |
| 270 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>; |
| 271 | dma-names = "rxtx"; |
| 272 | pinctrl-names = "default"; |
| 273 | pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; |
| 274 | status = "disabled"; |
| 275 | #address-cells = <1>; |
| 276 | #size-cells = <0>; |
| 277 | clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; |
| 278 | clock-names = "mci_clk"; |
| 279 | }; |
| 280 | |
| 281 | spi1: spi@f8008000 { |
| 282 | #address-cells = <1>; |
| 283 | #size-cells = <0>; |
| 284 | compatible = "atmel,at91rm9200-spi"; |
| 285 | reg = <0xf8008000 0x100>; |
| 286 | interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; |
| 287 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>, |
| 288 | <&dma1 2 AT91_DMA_CFG_PER_ID(16)>; |
| 289 | dma-names = "tx", "rx"; |
| 290 | pinctrl-names = "default"; |
| 291 | pinctrl-0 = <&pinctrl_spi1>; |
| 292 | clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; |
| 293 | clock-names = "spi_clk"; |
| 294 | status = "disabled"; |
| 295 | }; |
| 296 | |
| 297 | ssc1: ssc@f800c000 { |
| 298 | compatible = "atmel,at91sam9g45-ssc"; |
| 299 | reg = <0xf800c000 0x4000>; |
| 300 | interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; |
| 301 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>, |
| 302 | <&dma1 2 AT91_DMA_CFG_PER_ID(4)>; |
| 303 | dma-names = "tx", "rx"; |
| 304 | pinctrl-names = "default"; |
| 305 | pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; |
| 306 | clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| 307 | clock-names = "pclk"; |
| 308 | status = "disabled"; |
| 309 | }; |
| 310 | |
| 311 | adc0: adc@f8018000 { |
| 312 | compatible = "atmel,sama5d3-adc"; |
| 313 | reg = <0xf8018000 0x100>; |
| 314 | interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>; |
| 315 | pinctrl-names = "default"; |
| 316 | pinctrl-0 = < |
| 317 | &pinctrl_adc0_adtrg |
| 318 | &pinctrl_adc0_ad0 |
| 319 | &pinctrl_adc0_ad1 |
| 320 | &pinctrl_adc0_ad2 |
| 321 | &pinctrl_adc0_ad3 |
| 322 | &pinctrl_adc0_ad4 |
| 323 | &pinctrl_adc0_ad5 |
| 324 | &pinctrl_adc0_ad6 |
| 325 | &pinctrl_adc0_ad7 |
| 326 | &pinctrl_adc0_ad8 |
| 327 | &pinctrl_adc0_ad9 |
| 328 | &pinctrl_adc0_ad10 |
| 329 | &pinctrl_adc0_ad11 |
| 330 | >; |
| 331 | clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, |
| 332 | <&adc_op_clk>; |
| 333 | clock-names = "adc_clk", "adc_op_clk"; |
| 334 | atmel,adc-channels-used = <0xfff>; |
| 335 | atmel,adc-startup-time = <40>; |
| 336 | atmel,adc-use-external-triggers; |
| 337 | atmel,adc-vref = <3000>; |
| 338 | atmel,adc-sample-hold-time = <11>; |
| 339 | status = "disabled"; |
| 340 | }; |
| 341 | |
| 342 | i2c2: i2c@f801c000 { |
| 343 | compatible = "atmel,at91sam9x5-i2c"; |
| 344 | reg = <0xf801c000 0x4000>; |
| 345 | interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>; |
| 346 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, |
| 347 | <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; |
| 348 | dma-names = "tx", "rx"; |
| 349 | pinctrl-names = "default", "gpio"; |
| 350 | pinctrl-0 = <&pinctrl_i2c2>; |
| 351 | pinctrl-1 = <&pinctrl_i2c2_gpio>; |
| 352 | sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>; |
| 353 | scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 354 | #address-cells = <1>; |
| 355 | #size-cells = <0>; |
| 356 | clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; |
| 357 | status = "disabled"; |
| 358 | }; |
| 359 | |
| 360 | usart2: serial@f8020000 { |
| 361 | compatible = "atmel,at91sam9260-usart"; |
| 362 | reg = <0xf8020000 0x100>; |
| 363 | atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 364 | interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; |
| 365 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>, |
| 366 | <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| 367 | dma-names = "tx", "rx"; |
| 368 | pinctrl-names = "default"; |
| 369 | pinctrl-0 = <&pinctrl_usart2>; |
| 370 | clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; |
| 371 | clock-names = "usart"; |
| 372 | status = "disabled"; |
| 373 | }; |
| 374 | |
| 375 | usart3: serial@f8024000 { |
| 376 | compatible = "atmel,at91sam9260-usart"; |
| 377 | reg = <0xf8024000 0x100>; |
| 378 | atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 379 | interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; |
| 380 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>, |
| 381 | <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| 382 | dma-names = "tx", "rx"; |
| 383 | pinctrl-names = "default"; |
| 384 | pinctrl-0 = <&pinctrl_usart3>; |
| 385 | clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; |
| 386 | clock-names = "usart"; |
| 387 | status = "disabled"; |
| 388 | }; |
| 389 | |
| 390 | sha: crypto@f8034000 { |
| 391 | compatible = "atmel,at91sam9g46-sha"; |
| 392 | reg = <0xf8034000 0x100>; |
| 393 | interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; |
| 394 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; |
| 395 | dma-names = "tx"; |
| 396 | clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; |
| 397 | clock-names = "sha_clk"; |
| 398 | }; |
| 399 | |
| 400 | aes: crypto@f8038000 { |
| 401 | compatible = "atmel,at91sam9g46-aes"; |
| 402 | reg = <0xf8038000 0x100>; |
| 403 | interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; |
| 404 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, |
| 405 | <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; |
| 406 | dma-names = "tx", "rx"; |
| 407 | clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; |
| 408 | clock-names = "aes_clk"; |
| 409 | }; |
| 410 | |
| 411 | tdes: crypto@f803c000 { |
| 412 | compatible = "atmel,at91sam9g46-tdes"; |
| 413 | reg = <0xf803c000 0x100>; |
| 414 | interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; |
| 415 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, |
| 416 | <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; |
| 417 | dma-names = "tx", "rx"; |
| 418 | clocks = <&pmc PMC_TYPE_PERIPHERAL 44>; |
| 419 | clock-names = "tdes_clk"; |
| 420 | }; |
| 421 | |
| 422 | trng@f8040000 { |
| 423 | compatible = "atmel,at91sam9g45-trng"; |
| 424 | reg = <0xf8040000 0x100>; |
| 425 | interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; |
| 426 | clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; |
| 427 | }; |
| 428 | |
| 429 | hsmc: hsmc@ffffc000 { |
| 430 | compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd"; |
| 431 | reg = <0xffffc000 0x1000>; |
| 432 | interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>; |
| 433 | clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; |
| 434 | #address-cells = <1>; |
| 435 | #size-cells = <1>; |
| 436 | ranges; |
| 437 | |
| 438 | pmecc: ecc-engine@ffffc070 { |
| 439 | compatible = "atmel,at91sam9g45-pmecc"; |
| 440 | reg = <0xffffc070 0x490>, |
| 441 | <0xffffc500 0x100>; |
| 442 | }; |
| 443 | }; |
| 444 | |
| 445 | dma0: dma-controller@ffffe600 { |
| 446 | compatible = "atmel,at91sam9g45-dma"; |
| 447 | reg = <0xffffe600 0x200>; |
| 448 | interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>; |
| 449 | #dma-cells = <2>; |
| 450 | clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; |
| 451 | clock-names = "dma_clk"; |
| 452 | }; |
| 453 | |
| 454 | dma1: dma-controller@ffffe800 { |
| 455 | compatible = "atmel,at91sam9g45-dma"; |
| 456 | reg = <0xffffe800 0x200>; |
| 457 | interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; |
| 458 | #dma-cells = <2>; |
| 459 | clocks = <&pmc PMC_TYPE_PERIPHERAL 31>; |
| 460 | clock-names = "dma_clk"; |
| 461 | }; |
| 462 | |
| 463 | ramc0: ramc@ffffea00 { |
| 464 | compatible = "atmel,sama5d3-ddramc"; |
| 465 | reg = <0xffffea00 0x200>; |
| 466 | clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>; |
| 467 | clock-names = "ddrck", "mpddr"; |
| 468 | }; |
| 469 | |
| 470 | dbgu: serial@ffffee00 { |
| 471 | compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; |
| 472 | reg = <0xffffee00 0x200>; |
| 473 | atmel,usart-mode = <AT91_USART_MODE_SERIAL>; |
| 474 | interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; |
| 475 | dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>, |
| 476 | <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>; |
| 477 | dma-names = "tx", "rx"; |
| 478 | pinctrl-names = "default"; |
| 479 | pinctrl-0 = <&pinctrl_dbgu>; |
| 480 | clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; |
| 481 | clock-names = "usart"; |
| 482 | status = "disabled"; |
| 483 | }; |
| 484 | |
| 485 | aic: interrupt-controller@fffff000 { |
| 486 | #interrupt-cells = <3>; |
| 487 | compatible = "atmel,sama5d3-aic"; |
| 488 | interrupt-controller; |
| 489 | reg = <0xfffff000 0x200>; |
| 490 | atmel,external-irqs = <47>; |
| 491 | }; |
| 492 | |
| 493 | pinctrl: pinctrl@fffff200 { |
| 494 | #address-cells = <1>; |
| 495 | #size-cells = <1>; |
| 496 | compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; |
| 497 | ranges = <0xfffff200 0xfffff200 0xa00>; |
| 498 | atmel,mux-mask = < |
| 499 | /* A B C */ |
| 500 | 0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */ |
| 501 | 0xffffffff 0x0ff8ffff 0x00000000 /* pioB */ |
| 502 | 0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */ |
| 503 | 0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */ |
| 504 | 0xffffffff 0xbf9f8000 0x18000000 /* pioE */ |
| 505 | >; |
| 506 | |
| 507 | /* shared pinctrl settings */ |
| 508 | adc0 { |
| 509 | pinctrl_adc0_adtrg: adc0_adtrg { |
| 510 | atmel,pins = |
| 511 | <AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD19 periph A ADTRG */ |
| 512 | }; |
| 513 | pinctrl_adc0_ad0: adc0_ad0 { |
| 514 | atmel,pins = |
| 515 | <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD20 periph A AD0 */ |
| 516 | }; |
| 517 | pinctrl_adc0_ad1: adc0_ad1 { |
| 518 | atmel,pins = |
| 519 | <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A AD1 */ |
| 520 | }; |
| 521 | pinctrl_adc0_ad2: adc0_ad2 { |
| 522 | atmel,pins = |
| 523 | <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD22 periph A AD2 */ |
| 524 | }; |
| 525 | pinctrl_adc0_ad3: adc0_ad3 { |
| 526 | atmel,pins = |
| 527 | <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD23 periph A AD3 */ |
| 528 | }; |
| 529 | pinctrl_adc0_ad4: adc0_ad4 { |
| 530 | atmel,pins = |
| 531 | <AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD24 periph A AD4 */ |
| 532 | }; |
| 533 | pinctrl_adc0_ad5: adc0_ad5 { |
| 534 | atmel,pins = |
| 535 | <AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD25 periph A AD5 */ |
| 536 | }; |
| 537 | pinctrl_adc0_ad6: adc0_ad6 { |
| 538 | atmel,pins = |
| 539 | <AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD26 periph A AD6 */ |
| 540 | }; |
| 541 | pinctrl_adc0_ad7: adc0_ad7 { |
| 542 | atmel,pins = |
| 543 | <AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD27 periph A AD7 */ |
| 544 | }; |
| 545 | pinctrl_adc0_ad8: adc0_ad8 { |
| 546 | atmel,pins = |
| 547 | <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD28 periph A AD8 */ |
| 548 | }; |
| 549 | pinctrl_adc0_ad9: adc0_ad9 { |
| 550 | atmel,pins = |
| 551 | <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD29 periph A AD9 */ |
| 552 | }; |
| 553 | pinctrl_adc0_ad10: adc0_ad10 { |
| 554 | atmel,pins = |
| 555 | <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD30 periph A AD10, conflicts with PCK0 */ |
| 556 | }; |
| 557 | pinctrl_adc0_ad11: adc0_ad11 { |
| 558 | atmel,pins = |
| 559 | <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD31 periph A AD11, conflicts with PCK1 */ |
| 560 | }; |
| 561 | }; |
| 562 | |
| 563 | dbgu { |
| 564 | pinctrl_dbgu: dbgu-0 { |
| 565 | atmel,pins = |
| 566 | <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP |
| 567 | AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 568 | }; |
| 569 | }; |
| 570 | |
| 571 | ebi { |
| 572 | pinctrl_ebi_addr: ebi-addr-0 { |
| 573 | atmel,pins = |
| 574 | <AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 575 | AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 576 | AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 577 | AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 578 | AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 579 | AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 580 | AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 581 | AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 582 | AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 583 | AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 584 | AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 585 | AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 586 | AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 587 | AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 588 | AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 589 | AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 590 | AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 591 | AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 592 | AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 593 | AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 594 | AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 595 | AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 596 | AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 597 | }; |
| 598 | |
| 599 | pinctrl_ebi_nand_addr: ebi-addr-1 { |
| 600 | atmel,pins = |
| 601 | <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE |
| 602 | AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 603 | }; |
| 604 | |
| 605 | pinctrl_ebi_cs0: ebi-cs0-0 { |
| 606 | atmel,pins = |
| 607 | <AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 608 | }; |
| 609 | |
| 610 | pinctrl_ebi_cs1: ebi-cs1-0 { |
| 611 | atmel,pins = |
| 612 | <AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 613 | }; |
| 614 | |
| 615 | pinctrl_ebi_cs2: ebi-cs2-0 { |
| 616 | atmel,pins = |
| 617 | <AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 618 | }; |
| 619 | |
| 620 | pinctrl_ebi_nwait: ebi-nwait-0 { |
| 621 | atmel,pins = |
| 622 | <AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 623 | }; |
| 624 | |
| 625 | pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 { |
| 626 | atmel,pins = |
| 627 | <AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 628 | }; |
| 629 | }; |
| 630 | |
| 631 | i2c0 { |
| 632 | pinctrl_i2c0: i2c0-0 { |
| 633 | atmel,pins = |
| 634 | <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ |
| 635 | AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ |
| 636 | }; |
| 637 | |
| 638 | pinctrl_i2c0_gpio: i2c0-gpio { |
| 639 | atmel,pins = |
| 640 | <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE |
| 641 | AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 642 | }; |
| 643 | }; |
| 644 | |
| 645 | i2c1 { |
| 646 | pinctrl_i2c1: i2c1-0 { |
| 647 | atmel,pins = |
| 648 | <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ |
| 649 | AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ |
| 650 | }; |
| 651 | |
| 652 | pinctrl_i2c1_gpio: i2c1-gpio { |
| 653 | atmel,pins = |
| 654 | <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE |
| 655 | AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 656 | }; |
| 657 | }; |
| 658 | |
| 659 | i2c2 { |
| 660 | pinctrl_i2c2: i2c2-0 { |
| 661 | atmel,pins = |
| 662 | <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ |
| 663 | AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ |
| 664 | }; |
| 665 | |
| 666 | pinctrl_i2c2_gpio: i2c2-gpio { |
| 667 | atmel,pins = |
| 668 | <AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE |
| 669 | AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| 670 | }; |
| 671 | }; |
| 672 | |
| 673 | isi { |
| 674 | pinctrl_isi_data_0_7: isi-0-data-0-7 { |
| 675 | atmel,pins = |
| 676 | <AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */ |
| 677 | AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */ |
| 678 | AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */ |
| 679 | AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */ |
| 680 | AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */ |
| 681 | AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */ |
| 682 | AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */ |
| 683 | AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */ |
| 684 | AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC30 periph C ISI_PCK, conflicts with UTXD0 */ |
| 685 | AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */ |
| 686 | AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */ |
| 687 | }; |
| 688 | |
| 689 | pinctrl_isi_data_8_9: isi-0-data-8-9 { |
| 690 | atmel,pins = |
| 691 | <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */ |
| 692 | AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */ |
| 693 | }; |
| 694 | |
| 695 | pinctrl_isi_data_10_11: isi-0-data-10-11 { |
| 696 | atmel,pins = |
| 697 | <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */ |
| 698 | AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */ |
| 699 | }; |
| 700 | }; |
| 701 | |
| 702 | mmc0 { |
| 703 | pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { |
| 704 | atmel,pins = |
| 705 | <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A MCI0_CK */ |
| 706 | AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A MCI0_CDA with pullup */ |
| 707 | AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD1 periph A MCI0_DA0 with pullup */ |
| 708 | }; |
| 709 | pinctrl_mmc0_dat1_3: mmc0_dat1_3 { |
| 710 | atmel,pins = |
| 711 | <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A MCI0_DA1 with pullup */ |
| 712 | AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD3 periph A MCI0_DA2 with pullup */ |
| 713 | AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD4 periph A MCI0_DA3 with pullup */ |
| 714 | }; |
| 715 | pinctrl_mmc0_dat4_7: mmc0_dat4_7 { |
| 716 | atmel,pins = |
| 717 | <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ |
| 718 | AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ |
| 719 | AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conflicts with TCLK0, PWMH3 */ |
| 720 | AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ |
| 721 | }; |
| 722 | }; |
| 723 | |
| 724 | mmc1 { |
| 725 | pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 { |
| 726 | atmel,pins = |
| 727 | <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB24 periph A MCI1_CK, conflicts with GRX5 */ |
| 728 | AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */ |
| 729 | AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */ |
| 730 | }; |
| 731 | pinctrl_mmc1_dat1_3: mmc1_dat1_3 { |
| 732 | atmel,pins = |
| 733 | <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */ |
| 734 | AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */ |
| 735 | AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */ |
| 736 | }; |
| 737 | }; |
| 738 | |
| 739 | nand0 { |
| 740 | pinctrl_nand0_ale_cle: nand0_ale_cle-0 { |
| 741 | atmel,pins = |
| 742 | <AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PE21 periph A with pullup */ |
| 743 | AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PE22 periph A with pullup */ |
| 744 | }; |
| 745 | }; |
| 746 | |
| 747 | pwm0 { |
| 748 | pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 { |
| 749 | atmel,pins = |
| 750 | <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */ |
| 751 | }; |
| 752 | pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 { |
| 753 | atmel,pins = |
| 754 | <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX0 */ |
| 755 | }; |
| 756 | pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 { |
| 757 | atmel,pins = |
| 758 | <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */ |
| 759 | }; |
| 760 | pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 { |
| 761 | atmel,pins = |
| 762 | <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX1 */ |
| 763 | }; |
| 764 | |
| 765 | pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 { |
| 766 | atmel,pins = |
| 767 | <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */ |
| 768 | }; |
| 769 | pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 { |
| 770 | atmel,pins = |
| 771 | <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX0 */ |
| 772 | }; |
| 773 | pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 { |
| 774 | atmel,pins = |
| 775 | <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */ |
| 776 | }; |
| 777 | pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 { |
| 778 | atmel,pins = |
| 779 | <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */ |
| 780 | }; |
| 781 | pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 { |
| 782 | atmel,pins = |
| 783 | <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX1 */ |
| 784 | }; |
| 785 | pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 { |
| 786 | atmel,pins = |
| 787 | <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */ |
| 788 | }; |
| 789 | |
| 790 | pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 { |
| 791 | atmel,pins = |
| 792 | <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXCK */ |
| 793 | }; |
| 794 | pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 { |
| 795 | atmel,pins = |
| 796 | <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA4 and TIOA0 */ |
| 797 | }; |
| 798 | pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 { |
| 799 | atmel,pins = |
| 800 | <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXEN */ |
| 801 | }; |
| 802 | pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 { |
| 803 | atmel,pins = |
| 804 | <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA5 and TIOB0 */ |
| 805 | }; |
| 806 | |
| 807 | pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 { |
| 808 | atmel,pins = |
| 809 | <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */ |
| 810 | }; |
| 811 | pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 { |
| 812 | atmel,pins = |
| 813 | <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA6 and TCLK0 */ |
| 814 | }; |
| 815 | pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 { |
| 816 | atmel,pins = |
| 817 | <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */ |
| 818 | }; |
| 819 | pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 { |
| 820 | atmel,pins = |
| 821 | <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA7 */ |
| 822 | }; |
| 823 | }; |
| 824 | |
| 825 | spi0 { |
| 826 | pinctrl_spi0: spi0-0 { |
| 827 | atmel,pins = |
| 828 | <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD10 periph A SPI0_MISO pin */ |
| 829 | AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD11 periph A SPI0_MOSI pin */ |
| 830 | AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A SPI0_SPCK pin */ |
| 831 | }; |
| 832 | }; |
| 833 | |
| 834 | spi1 { |
| 835 | pinctrl_spi1: spi1-0 { |
| 836 | atmel,pins = |
| 837 | <AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A SPI1_MISO pin */ |
| 838 | AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A SPI1_MOSI pin */ |
| 839 | AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC24 periph A SPI1_SPCK pin */ |
| 840 | }; |
| 841 | }; |
| 842 | |
| 843 | ssc0 { |
| 844 | pinctrl_ssc0_tx: ssc0_tx { |
| 845 | atmel,pins = |
| 846 | <AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A TK0 */ |
| 847 | AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC17 periph A TF0 */ |
| 848 | AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC18 periph A TD0 */ |
| 849 | }; |
| 850 | |
| 851 | pinctrl_ssc0_rx: ssc0_rx { |
| 852 | atmel,pins = |
| 853 | <AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A RK0 */ |
| 854 | AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC20 periph A RF0 */ |
| 855 | AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC21 periph A RD0 */ |
| 856 | }; |
| 857 | }; |
| 858 | |
| 859 | ssc1 { |
| 860 | pinctrl_ssc1_tx: ssc1_tx { |
| 861 | atmel,pins = |
| 862 | <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB2 periph B TK1, conflicts with GTX2 */ |
| 863 | AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB3 periph B TF1, conflicts with GTX3 */ |
| 864 | AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB6 periph B TD1, conflicts with TD1 */ |
| 865 | }; |
| 866 | |
| 867 | pinctrl_ssc1_rx: ssc1_rx { |
| 868 | atmel,pins = |
| 869 | <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB7 periph B RK1, conflicts with EREFCK */ |
| 870 | AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB10 periph B RF1, conflicts with GTXER */ |
| 871 | AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB11 periph B RD1, conflicts with GRXCK */ |
| 872 | }; |
| 873 | }; |
| 874 | |
| 875 | uart0 { |
| 876 | pinctrl_uart0: uart0-0 { |
| 877 | atmel,pins = |
| 878 | <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* conflicts with PWMFI2, ISI_D8 */ |
| 879 | AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with ISI_PCK */ |
| 880 | }; |
| 881 | }; |
| 882 | |
| 883 | uart1 { |
| 884 | pinctrl_uart1: uart1-0 { |
| 885 | atmel,pins = |
| 886 | <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* conflicts with TWD0, ISI_VSYNC */ |
| 887 | AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with TWCK0, ISI_HSYNC */ |
| 888 | }; |
| 889 | }; |
| 890 | |
| 891 | usart0 { |
| 892 | pinctrl_usart0: usart0-0 { |
| 893 | atmel,pins = |
| 894 | <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP |
| 895 | AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 896 | }; |
| 897 | |
| 898 | pinctrl_usart0_rts_cts: usart0_rts_cts-0 { |
| 899 | atmel,pins = |
| 900 | <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */ |
| 901 | AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */ |
| 902 | }; |
| 903 | }; |
| 904 | |
| 905 | usart1 { |
| 906 | pinctrl_usart1: usart1-0 { |
| 907 | atmel,pins = |
| 908 | <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP |
| 909 | AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 910 | }; |
| 911 | |
| 912 | pinctrl_usart1_rts_cts: usart1_rts_cts-0 { |
| 913 | atmel,pins = |
| 914 | <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB26 periph A, conflicts with GRX7 */ |
| 915 | AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A, conflicts with G125CKO */ |
| 916 | }; |
| 917 | }; |
| 918 | |
| 919 | usart2 { |
| 920 | pinctrl_usart2: usart2-0 { |
| 921 | atmel,pins = |
| 922 | <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* conflicts with A25 */ |
| 923 | AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts NCS0 */ |
| 924 | }; |
| 925 | |
| 926 | pinctrl_usart2_rts_cts: usart2_rts_cts-0 { |
| 927 | atmel,pins = |
| 928 | <AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE23 periph B, conflicts with A23 */ |
| 929 | AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE24 periph B, conflicts with A24 */ |
| 930 | }; |
| 931 | }; |
| 932 | |
| 933 | usart3 { |
| 934 | pinctrl_usart3: usart3-0 { |
| 935 | atmel,pins = |
| 936 | <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* conflicts with A18 */ |
| 937 | AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with A19 */ |
| 938 | }; |
| 939 | |
| 940 | pinctrl_usart3_rts_cts: usart3_rts_cts-0 { |
| 941 | atmel,pins = |
| 942 | <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE16 periph B, conflicts with A16 */ |
| 943 | AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PE17 periph B, conflicts with A17 */ |
| 944 | }; |
| 945 | }; |
| 946 | |
| 947 | |
| 948 | pioA: gpio@fffff200 { |
| 949 | compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| 950 | reg = <0xfffff200 0x100>; |
| 951 | interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>; |
| 952 | #gpio-cells = <2>; |
| 953 | gpio-controller; |
| 954 | interrupt-controller; |
| 955 | #interrupt-cells = <2>; |
| 956 | clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; |
| 957 | }; |
| 958 | |
| 959 | pioB: gpio@fffff400 { |
| 960 | compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| 961 | reg = <0xfffff400 0x100>; |
| 962 | interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>; |
| 963 | #gpio-cells = <2>; |
| 964 | gpio-controller; |
| 965 | interrupt-controller; |
| 966 | #interrupt-cells = <2>; |
| 967 | clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; |
| 968 | }; |
| 969 | |
| 970 | pioC: gpio@fffff600 { |
| 971 | compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| 972 | reg = <0xfffff600 0x100>; |
| 973 | interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>; |
| 974 | #gpio-cells = <2>; |
| 975 | gpio-controller; |
| 976 | interrupt-controller; |
| 977 | #interrupt-cells = <2>; |
| 978 | clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; |
| 979 | }; |
| 980 | |
| 981 | pioD: gpio@fffff800 { |
| 982 | compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| 983 | reg = <0xfffff800 0x100>; |
| 984 | interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>; |
| 985 | #gpio-cells = <2>; |
| 986 | gpio-controller; |
| 987 | interrupt-controller; |
| 988 | #interrupt-cells = <2>; |
| 989 | clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; |
| 990 | }; |
| 991 | |
| 992 | pioE: gpio@fffffa00 { |
| 993 | compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; |
| 994 | reg = <0xfffffa00 0x100>; |
| 995 | interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>; |
| 996 | #gpio-cells = <2>; |
| 997 | gpio-controller; |
| 998 | interrupt-controller; |
| 999 | #interrupt-cells = <2>; |
| 1000 | clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; |
| 1001 | }; |
| 1002 | }; |
| 1003 | |
| 1004 | pmc: clock-controller@fffffc00 { |
| 1005 | compatible = "atmel,sama5d3-pmc", "syscon"; |
| 1006 | reg = <0xfffffc00 0x120>; |
| 1007 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1008 | #clock-cells = <2>; |
| 1009 | clocks = <&clk32k>, <&main_xtal>; |
| 1010 | clock-names = "slow_clk", "main_xtal"; |
| 1011 | }; |
| 1012 | |
| 1013 | reset_controller: reset-controller@fffffe00 { |
| 1014 | compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; |
| 1015 | reg = <0xfffffe00 0x10>; |
| 1016 | clocks = <&clk32k>; |
| 1017 | }; |
| 1018 | |
| 1019 | shutdown_controller: poweroff@fffffe10 { |
| 1020 | compatible = "atmel,at91sam9x5-shdwc"; |
| 1021 | reg = <0xfffffe10 0x10>; |
| 1022 | clocks = <&clk32k>; |
| 1023 | }; |
| 1024 | |
| 1025 | pit: timer@fffffe30 { |
| 1026 | compatible = "atmel,at91sam9260-pit"; |
| 1027 | reg = <0xfffffe30 0xf>; |
| 1028 | interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; |
| 1029 | clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; |
| 1030 | }; |
| 1031 | |
| 1032 | watchdog: watchdog@fffffe40 { |
| 1033 | compatible = "atmel,at91sam9260-wdt"; |
| 1034 | reg = <0xfffffe40 0x10>; |
| 1035 | interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1036 | clocks = <&clk32k>; |
| 1037 | atmel,watchdog-type = "hardware"; |
| 1038 | atmel,reset-type = "all"; |
| 1039 | atmel,dbg-halt; |
| 1040 | status = "disabled"; |
| 1041 | }; |
| 1042 | |
| 1043 | clk32k: clock-controller@fffffe50 { |
| 1044 | compatible = "atmel,sama5d3-sckc"; |
| 1045 | reg = <0xfffffe50 0x4>; |
| 1046 | clocks = <&slow_xtal>; |
| 1047 | #clock-cells = <0>; |
| 1048 | }; |
| 1049 | |
| 1050 | rtc@fffffeb0 { |
| 1051 | compatible = "atmel,at91rm9200-rtc"; |
| 1052 | reg = <0xfffffeb0 0x30>; |
| 1053 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1054 | clocks = <&clk32k>; |
| 1055 | }; |
| 1056 | }; |
| 1057 | |
| 1058 | nfc_sram: sram@200000 { |
| 1059 | compatible = "mmio-sram"; |
| 1060 | no-memory-wc; |
| 1061 | reg = <0x200000 0x2400>; |
| 1062 | #address-cells = <1>; |
| 1063 | #size-cells = <1>; |
| 1064 | ranges = <0 0x200000 0x2400>; |
| 1065 | }; |
| 1066 | |
| 1067 | usb0: gadget@500000 { |
| 1068 | compatible = "atmel,sama5d3-udc"; |
| 1069 | reg = <0x00500000 0x100000 |
| 1070 | 0xf8030000 0x4000>; |
| 1071 | interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; |
| 1072 | clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| 1073 | clock-names = "pclk", "hclk"; |
| 1074 | status = "disabled"; |
| 1075 | }; |
| 1076 | |
| 1077 | usb1: ohci@600000 { |
| 1078 | compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| 1079 | reg = <0x00600000 0x100000>; |
| 1080 | interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; |
| 1081 | clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>; |
| 1082 | clock-names = "ohci_clk", "hclk", "uhpck"; |
| 1083 | status = "disabled"; |
| 1084 | }; |
| 1085 | |
| 1086 | usb2: ehci@700000 { |
| 1087 | compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; |
| 1088 | reg = <0x00700000 0x100000>; |
| 1089 | interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; |
| 1090 | clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>; |
| 1091 | clock-names = "usb_clk", "ehci_clk"; |
| 1092 | status = "disabled"; |
| 1093 | }; |
| 1094 | |
| 1095 | ebi: ebi@10000000 { |
| 1096 | compatible = "atmel,sama5d3-ebi"; |
| 1097 | #address-cells = <2>; |
| 1098 | #size-cells = <1>; |
| 1099 | atmel,smc = <&hsmc>; |
| 1100 | reg = <0x10000000 0x10000000 |
| 1101 | 0x40000000 0x30000000>; |
| 1102 | ranges = <0x0 0x0 0x10000000 0x10000000 |
| 1103 | 0x1 0x0 0x40000000 0x10000000 |
| 1104 | 0x2 0x0 0x50000000 0x10000000 |
| 1105 | 0x3 0x0 0x60000000 0x10000000>; |
| 1106 | clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; |
| 1107 | status = "disabled"; |
| 1108 | |
| 1109 | nand_controller: nand-controller { |
| 1110 | compatible = "atmel,sama5d3-nand-controller"; |
| 1111 | atmel,nfc-sram = <&nfc_sram>; |
| 1112 | atmel,nfc-io = <&nfc_io>; |
| 1113 | ecc-engine = <&pmecc>; |
| 1114 | #address-cells = <2>; |
| 1115 | #size-cells = <1>; |
| 1116 | ranges; |
| 1117 | status = "disabled"; |
| 1118 | }; |
| 1119 | }; |
| 1120 | |
| 1121 | nfc_io: nfc-io@70000000 { |
| 1122 | compatible = "atmel,sama5d3-nfc-io", "syscon"; |
| 1123 | reg = <0x70000000 0x8000000>; |
| 1124 | }; |
| 1125 | }; |
| 1126 | }; |