blob: 02b4e9cd7b1bcc6e05f6f81dcdd74fa787cf5cae [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -05001Maxim Integrated MAX2175 RF to Bits tuner
2-----------------------------------------
3
4The MAX2175 IC is an advanced analog/digital hybrid-radio receiver with
5RF to BitsĀ® front-end designed for software-defined radio solutions.
6
7Required properties:
8--------------------
9- compatible: "maxim,max2175" for MAX2175 RF-to-bits tuner.
10- clocks: clock specifier.
11- port: child port node corresponding to the I2S output, in accordance with
12 the video interface bindings defined in
13 Documentation/devicetree/bindings/media/video-interfaces.txt. The port
14 node must contain at least one endpoint.
15
16Optional properties:
17--------------------
18- maxim,master : phandle to the master tuner if it is a slave. This
19 is used to define two tuners in diversity mode
20 (1 master, 1 slave). By default each tuner is an
21 individual master.
22- maxim,refout-load : load capacitance value (in picofarads) on reference
23 output drive level. The possible load values are:
24 0 (default - refout disabled)
25 10
26 20
27 30
28 40
29 60
30 70
31- maxim,am-hiz-filter : empty property indicates the AM Hi-Z filter is used
32 in this hardware for AM antenna input.
33
34Example:
35--------
36
37Board specific DTS file
38
39/* Fixed XTAL clock node */
40maxim_xtal: clock {
41 compatible = "fixed-clock";
42 #clock-cells = <0>;
43 clock-frequency = <36864000>;
44};
45
46/* A tuner device instance under i2c bus */
47max2175_0: tuner@60 {
48 compatible = "maxim,max2175";
49 reg = <0x60>;
50 clocks = <&maxim_xtal>;
51 maxim,refout-load = <10>;
52
53 port {
54 max2175_0_ep: endpoint {
55 remote-endpoint = <&slave_rx_device>;
56 };
57 };
58
59};