Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / a009fa7ec986186bcdccd3095b711a435c564ba7 / . / arch / arm / dts / am437x-sk-evm.dts
blob: dc8fcde4586f10dc8dbf970846bae06837074c14 [file] [log] [blame]
Mugunthan V Nbd2fb222015-09-28 16:17:52 +0530[diff] [blame]1/*
2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9/* AM437x SK EVM */
10
11/dts-v1/;
12
13#include "am4372.dtsi"
14#include <dt-bindings/pinctrl/am43xx.h>
15#include <dt-bindings/pwm/pwm.h>
16#include <dt-bindings/gpio/gpio.h>
17#include <dt-bindings/input/input.h>
18
19/ {
20 model = "TI AM437x SK EVM";
21 compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
22
23 aliases {
24 display0 = &lcd0;
25 };
26
27 chosen {
28 stdout-path = &uart0;
Mugunthan V N58770482015-12-24 16:08:09 +0530[diff] [blame]29 tick-timer = &timer2;
Mugunthan V Nbd2fb222015-09-28 16:17:52 +0530[diff] [blame]30 };
31
32 backlight {
33 compatible = "pwm-backlight";
34 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
35 brightness-levels = <0 51 53 56 62 75 101 152 255>;
36 default-brightness-level = <8>;
37 };
38
39 sound {
40 compatible = "ti,da830-evm-audio";
41 ti,model = "AM437x-SK-EVM";
42 ti,audio-codec = <&tlv320aic3106>;
43 ti,mcasp-controller = <&mcasp1>;
44 ti,codec-clock-rate = <24000000>;
45 ti,audio-routing =
46 "Headphone Jack", "HPLOUT",
47 "Headphone Jack", "HPROUT";
48 };
49
50 matrix_keypad: matrix_keypad@0 {
51 compatible = "gpio-matrix-keypad";
52
53 pinctrl-names = "default";
54 pinctrl-0 = <&matrix_keypad_pins>;
55
56 debounce-delay-ms = <5>;
57 col-scan-delay-us = <5>;
58
59 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
60 &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
61
62 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */
63 &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */
64
65 linux,keymap = <
66 MATRIX_KEY(0, 0, KEY_DOWN)
67 MATRIX_KEY(0, 1, KEY_RIGHT)
68 MATRIX_KEY(1, 0, KEY_LEFT)
69 MATRIX_KEY(1, 1, KEY_UP)
70 >;
71 };
72
73 leds {
74 compatible = "gpio-leds";
75
76 pinctrl-names = "default";
77 pinctrl-0 = <&leds_pins>;
78
79 led@0 {
80 label = "am437x-sk:red:heartbeat";
81 gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
82 linux,default-trigger = "heartbeat";
83 default-state = "off";
84 };
85
86 led@1 {
87 label = "am437x-sk:green:mmc1";
88 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
89 linux,default-trigger = "mmc0";
90 default-state = "off";
91 };
92
93 led@2 {
94 label = "am437x-sk:blue:cpu0";
95 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
96 linux,default-trigger = "cpu0";
97 default-state = "off";
98 };
99
100 led@3 {
101 label = "am437x-sk:blue:usr3";
102 gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
103 default-state = "off";
104 };
105 };
106
107 lcd0: display {
108 compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
109 label = "lcd";
110
111 pinctrl-names = "default";
112 pinctrl-0 = <&lcd_pins>;
113
114 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
115
116 panel-timing {
117 clock-frequency = <9000000>;
118 hactive = <480>;
119 vactive = <272>;
120 hfront-porch = <2>;
121 hback-porch = <2>;
122 hsync-len = <41>;
123 vfront-porch = <2>;
124 vback-porch = <2>;
125 vsync-len = <10>;
126 hsync-active = <0>;
127 vsync-active = <0>;
128 de-active = <1>;
129 pixelclk-active = <1>;
130 };
131
132 port {
133 lcd_in: endpoint {
134 remote-endpoint = <&dpi_out>;
135 };
136 };
137 };
138};
139
140&am43xx_pinmux {
141 matrix_keypad_pins: matrix_keypad_pins {
142 pinctrl-single,pins = <
143 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
144 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
145 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
146 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
147 >;
148 };
149
150 leds_pins: leds_pins {
151 pinctrl-single,pins = <
152 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
153 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
154 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
155 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
156 >;
157 };
158
159 i2c0_pins: i2c0_pins {
160 pinctrl-single,pins = <
161 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
162 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
163 >;
164 };
165
166 i2c1_pins: i2c1_pins {
167 pinctrl-single,pins = <
168 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
169 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
170 >;
171 };
172
173 mmc1_pins: pinmux_mmc1_pins {
174 pinctrl-single,pins = <
175 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
176 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
177 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
178 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
179 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
180 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
181 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
182 >;
183 };
184
185 ecap0_pins: backlight_pins {
186 pinctrl-single,pins = <
187 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
188 >;
189 };
190
191 edt_ft5306_ts_pins: edt_ft5306_ts_pins {
192 pinctrl-single,pins = <
193 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
194 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
195 >;
196 };
197
198 vpfe0_pins_default: vpfe0_pins_default {
199 pinctrl-single,pins = <
200 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
201 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
202 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
203 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
204 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
205 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
206 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
207 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
208 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
209 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
210 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
211 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
212 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
213 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
214 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
215 >;
216 };
217
218 vpfe0_pins_sleep: vpfe0_pins_sleep {
219 pinctrl-single,pins = <
220 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
221 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
222 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
223 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
224 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
225 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
226 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
227 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
228 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
229 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
230 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
231 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
232 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
233 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
234 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
235 >;
236 };
237
238 cpsw_default: cpsw_default {
239 pinctrl-single,pins = <
240 /* Slave 1 */
241 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
242 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
243 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
244 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
245 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
246 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
247 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
248 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
249 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
250 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
251 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
252 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
253
254 /* Slave 2 */
255 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
256 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
257 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
258 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
259 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
260 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
261 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
262 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
263 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
264 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
265 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
266 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
267 >;
268 };
269
270 cpsw_sleep: cpsw_sleep {
271 pinctrl-single,pins = <
272 /* Slave 1 reset value */
273 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
274 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
275 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
276 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
277 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
278 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
279 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
280 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
281 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
282 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
283 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
284 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
285
286 /* Slave 2 reset value */
287 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
288 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
289 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
290 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
291 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
292 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
293 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
294 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
295 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
296 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
297 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
298 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
299 >;
300 };
301
302 davinci_mdio_default: davinci_mdio_default {
303 pinctrl-single,pins = <
304 /* MDIO */
305 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
306 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
307 >;
308 };
309
310 davinci_mdio_sleep: davinci_mdio_sleep {
311 pinctrl-single,pins = <
312 /* MDIO reset value */
313 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
314 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
315 >;
316 };
317
318 dss_pins: dss_pins {
319 pinctrl-single,pins = <
320 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
321 0x024 (PIN_OUTPUT | MUX_MODE1)
322 0x028 (PIN_OUTPUT | MUX_MODE1)
323 0x02c (PIN_OUTPUT | MUX_MODE1)
324 0x030 (PIN_OUTPUT | MUX_MODE1)
325 0x034 (PIN_OUTPUT | MUX_MODE1)
326 0x038 (PIN_OUTPUT | MUX_MODE1)
327 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
328 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
329 0x0a4 (PIN_OUTPUT | MUX_MODE0)
330 0x0a8 (PIN_OUTPUT | MUX_MODE0)
331 0x0ac (PIN_OUTPUT | MUX_MODE0)
332 0x0b0 (PIN_OUTPUT | MUX_MODE0)
333 0x0b4 (PIN_OUTPUT | MUX_MODE0)
334 0x0b8 (PIN_OUTPUT | MUX_MODE0)
335 0x0bc (PIN_OUTPUT | MUX_MODE0)
336 0x0c0 (PIN_OUTPUT | MUX_MODE0)
337 0x0c4 (PIN_OUTPUT | MUX_MODE0)
338 0x0c8 (PIN_OUTPUT | MUX_MODE0)
339 0x0cc (PIN_OUTPUT | MUX_MODE0)
340 0x0d0 (PIN_OUTPUT | MUX_MODE0)
341 0x0d4 (PIN_OUTPUT | MUX_MODE0)
342 0x0d8 (PIN_OUTPUT | MUX_MODE0)
343 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
344 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
345 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
346 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
347 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
348
349 >;
350 };
351
352 qspi_pins: qspi_pins {
353 pinctrl-single,pins = <
354 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
355 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
356 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
357 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
358 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
359 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
360 >;
361 };
362
363 mcasp1_pins: mcasp1_pins {
364 pinctrl-single,pins = <
365 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
366 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
367 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
368 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
369 >;
370 };
371
372 lcd_pins: lcd_pins {
373 pinctrl-single,pins = <
374 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
375 >;
376 };
377
378 usb1_pins: usb1_pins {
379 pinctrl-single,pins = <
380 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
381 >;
382 };
383
384 usb2_pins: usb2_pins {
385 pinctrl-single,pins = <
386 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
387 >;
388 };
389};
390
391&i2c0 {
392 status = "okay";
393 pinctrl-names = "default";
394 pinctrl-0 = <&i2c0_pins>;
395 clock-frequency = <400000>;
396
397 tps@24 {
398 compatible = "ti,tps65218";
399 reg = <0x24>;
400 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
401 interrupt-controller;
402 #interrupt-cells = <2>;
403
404 dcdc1: regulator-dcdc1 {
405 compatible = "ti,tps65218-dcdc1";
406 /* VDD_CORE limits min of OPP50 and max of OPP100 */
407 regulator-name = "vdd_core";
408 regulator-min-microvolt = <912000>;
409 regulator-max-microvolt = <1144000>;
410 regulator-boot-on;
411 regulator-always-on;
412 };
413
414 dcdc2: regulator-dcdc2 {
415 compatible = "ti,tps65218-dcdc2";
416 /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
417 regulator-name = "vdd_mpu";
418 regulator-min-microvolt = <912000>;
419 regulator-max-microvolt = <1378000>;
420 regulator-boot-on;
421 regulator-always-on;
422 };
423
424 dcdc3: regulator-dcdc3 {
425 compatible = "ti,tps65218-dcdc3";
426 regulator-name = "vdds_ddr";
427 regulator-min-microvolt = <1500000>;
428 regulator-max-microvolt = <1500000>;
429 regulator-boot-on;
430 regulator-always-on;
431 };
432
433 dcdc4: regulator-dcdc4 {
434 compatible = "ti,tps65218-dcdc4";
435 regulator-name = "v3_3d";
436 regulator-min-microvolt = <3300000>;
437 regulator-max-microvolt = <3300000>;
438 regulator-boot-on;
439 regulator-always-on;
440 };
441
442 ldo1: regulator-ldo1 {
443 compatible = "ti,tps65218-ldo1";
444 regulator-name = "v1_8d";
445 regulator-min-microvolt = <1800000>;
446 regulator-max-microvolt = <1800000>;
447 regulator-boot-on;
448 regulator-always-on;
449 };
450
451 power-button {
452 compatible = "ti,tps65218-pwrbutton";
453 status = "okay";
454 interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
455 };
456 };
457
458 at24@50 {
459 compatible = "at24,24c256";
460 pagesize = <64>;
461 reg = <0x50>;
462 };
463};
464
465&i2c1 {
466 status = "okay";
467 pinctrl-names = "default";
468 pinctrl-0 = <&i2c1_pins>;
469 clock-frequency = <400000>;
470
471 edt-ft5306@38 {
472 status = "okay";
473 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
474 pinctrl-names = "default";
475 pinctrl-0 = <&edt_ft5306_ts_pins>;
476
477 reg = <0x38>;
478 interrupt-parent = <&gpio0>;
479 interrupts = <31 0>;
480
481 reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
482
483 touchscreen-size-x = <480>;
484 touchscreen-size-y = <272>;
485 };
486
487 tlv320aic3106: tlv320aic3106@1b {
488 compatible = "ti,tlv320aic3106";
489 reg = <0x1b>;
490 status = "okay";
491
492 /* Regulators */
493 AVDD-supply = <&dcdc4>;
494 IOVDD-supply = <&dcdc4>;
495 DRVDD-supply = <&dcdc4>;
496 DVDD-supply = <&ldo1>;
497 };
498
499 lis331dlh@18 {
500 compatible = "st,lis331dlh";
501 reg = <0x18>;
502 status = "okay";
503
504 Vdd-supply = <&dcdc4>;
505 Vdd_IO-supply = <&dcdc4>;
506 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
507 };
508};
509
510&epwmss0 {
511 status = "okay";
512};
513
514&ecap0 {
515 status = "okay";
516 pinctrl-names = "default";
517 pinctrl-0 = <&ecap0_pins>;
518};
519
520&gpio0 {
521 status = "okay";
522};
523
524&gpio1 {
525 status = "okay";
526};
527
528&gpio5 {
529 status = "okay";
530};
531
532&mmc1 {
533 status = "okay";
534 pinctrl-names = "default";
535 pinctrl-0 = <&mmc1_pins>;
536
537 vmmc-supply = <&dcdc4>;
538 bus-width = <4>;
Mugunthan V N0aa768f2016-04-04 17:28:02 +0530[diff] [blame]539 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
Mugunthan V Nbd2fb222015-09-28 16:17:52 +0530[diff] [blame]540};
541
542&usb2_phy1 {
543 status = "okay";
544};
545
546&usb1 {
547 dr_mode = "peripheral";
548 status = "okay";
549 pinctrl-names = "default";
550 pinctrl-0 = <&usb1_pins>;
551};
552
553&usb2_phy2 {
554 status = "okay";
555};
556
557&usb2 {
558 dr_mode = "host";
559 status = "okay";
560 pinctrl-names = "default";
561 pinctrl-0 = <&usb2_pins>;
562};
563
564&qspi {
565 status = "okay";
566 pinctrl-names = "default";
567 pinctrl-0 = <&qspi_pins>;
568
569 spi-max-frequency = <48000000>;
570 m25p80@0 {
Neil Armstronga009fa72019-02-10 10:16:20 +0000[diff] [blame^]571 compatible = "mx66l51235l","jedec,spi-nor";
Mugunthan V Nbd2fb222015-09-28 16:17:52 +0530[diff] [blame]572 spi-max-frequency = <48000000>;
573 reg = <0>;
574 spi-cpol;
575 spi-cpha;
576 spi-tx-bus-width = <1>;
577 spi-rx-bus-width = <4>;
578 #address-cells = <1>;
579 #size-cells = <1>;
580
581 /* MTD partition table.
582 * The ROM checks the first 512KiB
583 * for a valid file to boot(XIP).
584 */
585 partition@0 {
586 label = "QSPI.U_BOOT";
587 reg = <0x00000000 0x000080000>;
588 };
589 partition@1 {
590 label = "QSPI.U_BOOT.backup";
591 reg = <0x00080000 0x00080000>;
592 };
593 partition@2 {
594 label = "QSPI.U-BOOT-SPL_OS";
595 reg = <0x00100000 0x00010000>;
596 };
597 partition@3 {
598 label = "QSPI.U_BOOT_ENV";
599 reg = <0x00110000 0x00010000>;
600 };
601 partition@4 {
602 label = "QSPI.U-BOOT-ENV.backup";
603 reg = <0x00120000 0x00010000>;
604 };
605 partition@5 {
606 label = "QSPI.KERNEL";
607 reg = <0x00130000 0x0800000>;
608 };
609 partition@6 {
610 label = "QSPI.FILESYSTEM";
611 reg = <0x00930000 0x36D0000>;
612 };
613 };
614};
615
616&mac {
617 pinctrl-names = "default", "sleep";
618 pinctrl-0 = <&cpsw_default>;
619 pinctrl-1 = <&cpsw_sleep>;
620 dual_emac = <1>;
621 status = "okay";
622};
623
624&davinci_mdio {
625 pinctrl-names = "default", "sleep";
626 pinctrl-0 = <&davinci_mdio_default>;
627 pinctrl-1 = <&davinci_mdio_sleep>;
628 status = "okay";
629};
630
631&cpsw_emac0 {
632 phy_id = <&davinci_mdio>, <4>;
633 phy-mode = "rgmii";
634 dual_emac_res_vlan = <1>;
635};
636
637&cpsw_emac1 {
638 phy_id = <&davinci_mdio>, <5>;
639 phy-mode = "rgmii";
640 dual_emac_res_vlan = <2>;
641};
642
643&elm {
644 status = "okay";
645};
646
647&mcasp1 {
648 pinctrl-names = "default";
649 pinctrl-0 = <&mcasp1_pins>;
650
651 status = "okay";
652
653 op-mode = <0>;
654 tdm-slots = <2>;
655 serial-dir = <
656 0 0 1 2
657 >;
658
659 tx-num-evt = <1>;
660 rx-num-evt = <1>;
661};
662
663&dss {
664 status = "okay";
665
666 pinctrl-names = "default";
667 pinctrl-0 = <&dss_pins>;
668
669 port {
670 dpi_out: endpoint@0 {
671 remote-endpoint = <&lcd_in>;
672 data-lines = <24>;
673 };
674 };
675};
676
677&rtc {
678 status = "okay";
679};
680
681&wdt {
682 status = "okay";
683};
684
685&cpu {
686 cpu0-supply = <&dcdc2>;
687};
688
689&vpfe0 {
690 status = "okay";
691 pinctrl-names = "default", "sleep";
692 pinctrl-0 = <&vpfe0_pins_default>;
693 pinctrl-1 = <&vpfe0_pins_sleep>;
694
695 /* Camera port */
696 port {
697 vpfe0_ep: endpoint {
698 /* remote-endpoint = <&sensor>; add once we have it */
699 ti,am437x-vpfe-interface = <0>;
700 bus-width = <8>;
701 hsync-active = <0>;
702 vsync-active = <0>;
703 };
704 };
705};