| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/display/panel/jdi,lpm102a188a.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: JDI LPM102A188A 2560x1800 10.2" DSI Panel |
| 8 | |
| 9 | maintainers: |
| 10 | - Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> |
| 11 | |
| 12 | description: | |
| 13 | This panel requires a dual-channel DSI host to operate. It supports two modes: |
| 14 | - left-right: each channel drives the left or right half of the screen |
| 15 | - even-odd: each channel drives the even or odd lines of the screen |
| 16 | |
| 17 | Each of the DSI channels controls a separate DSI peripheral. The peripheral |
| 18 | driven by the first link (DSI-LINK1) is considered the primary peripheral |
| 19 | and controls the device. The 'link2' property contains a phandle to the |
| 20 | peripheral driven by the second link (DSI-LINK2). |
| 21 | |
| 22 | allOf: |
| 23 | - $ref: panel-common.yaml# |
| 24 | |
| 25 | properties: |
| 26 | compatible: |
| 27 | const: jdi,lpm102a188a |
| 28 | |
| 29 | reg: true |
| 30 | enable-gpios: true |
| 31 | reset-gpios: true |
| 32 | power-supply: true |
| 33 | backlight: true |
| 34 | |
| 35 | ddi-supply: |
| 36 | description: The regulator that provides IOVCC (1.8V). |
| 37 | |
| 38 | link2: |
| 39 | $ref: /schemas/types.yaml#/definitions/phandle |
| 40 | description: | |
| 41 | phandle to the DSI peripheral on the secondary link. Note that the |
| 42 | presence of this property marks the containing node as DSI-LINK1. |
| 43 | |
| 44 | required: |
| 45 | - compatible |
| 46 | - reg |
| 47 | |
| 48 | if: |
| 49 | required: |
| 50 | - link2 |
| 51 | then: |
| 52 | required: |
| 53 | - power-supply |
| 54 | - ddi-supply |
| 55 | - enable-gpios |
| 56 | - reset-gpios |
| 57 | |
| 58 | additionalProperties: false |
| 59 | |
| 60 | examples: |
| 61 | - | |
| 62 | #include <dt-bindings/gpio/gpio.h> |
| 63 | #include <dt-bindings/gpio/tegra-gpio.h> |
| 64 | |
| 65 | dsia: dsi@54300000 { |
| 66 | #address-cells = <1>; |
| 67 | #size-cells = <0>; |
| 68 | reg = <0x0 0x54300000 0x0 0x00040000>; |
| 69 | |
| 70 | link2: panel@0 { |
| 71 | compatible = "jdi,lpm102a188a"; |
| 72 | reg = <0>; |
| 73 | }; |
| 74 | }; |
| 75 | |
| 76 | dsib: dsi@54400000{ |
| 77 | #address-cells = <1>; |
| 78 | #size-cells = <0>; |
| 79 | reg = <0x0 0x54400000 0x0 0x00040000>; |
| 80 | nvidia,ganged-mode = <&dsia>; |
| 81 | |
| 82 | link1: panel@0 { |
| 83 | compatible = "jdi,lpm102a188a"; |
| 84 | reg = <0>; |
| 85 | power-supply = <&pplcd_vdd>; |
| 86 | ddi-supply = <&pp1800_lcdio>; |
| 87 | enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; |
| 88 | reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; |
| 89 | link2 = <&link2>; |
| 90 | backlight = <&backlight>; |
| 91 | }; |
| 92 | }; |
| 93 | |
| 94 | ... |