Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2016 Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #ifndef __CONFIG_H |
| 8 | #define __CONFIG_H |
| 9 | |
| 10 | #define CONFIG_LS102XA |
| 11 | |
| 12 | #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR |
| 13 | |
| 14 | #define CONFIG_SYS_FSL_CLK |
| 15 | |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 16 | /* |
| 17 | * Size of malloc() pool |
| 18 | */ |
| 19 | #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) |
| 20 | |
| 21 | #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR |
| 22 | #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE |
| 23 | |
| 24 | /* XHCI Support - enabled by default */ |
| 25 | #define CONFIG_HAS_FSL_XHCI_USB |
| 26 | |
| 27 | #ifdef CONFIG_HAS_FSL_XHCI_USB |
| 28 | #define CONFIG_USB_XHCI_FSL |
| 29 | #define CONFIG_USB_XHCI_DWC3 |
| 30 | #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 |
| 31 | #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 |
| 32 | #endif |
| 33 | |
| 34 | #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB) |
| 35 | #define CONFIG_USB_STORAGE |
| 36 | #define CONFIG_CMD_EXT2 |
| 37 | #endif |
| 38 | |
| 39 | /* |
| 40 | * Generic Timer Definitions |
| 41 | */ |
| 42 | #define GENERIC_TIMER_CLK 12500000 |
| 43 | |
| 44 | #define CONFIG_SYS_CLK_FREQ 100000000 |
| 45 | #define CONFIG_DDR_CLK_FREQ 100000000 |
| 46 | |
| 47 | /* |
| 48 | * DDR: 800 MHz ( 1600 MT/s data rate ) |
| 49 | */ |
| 50 | |
| 51 | #define DDR_SDRAM_CFG 0x470c0008 |
| 52 | #define DDR_CS0_BNDS 0x008000bf |
| 53 | #define DDR_CS0_CONFIG 0x80014302 |
| 54 | #define DDR_TIMING_CFG_0 0x50550004 |
| 55 | #define DDR_TIMING_CFG_1 0xbcb38c56 |
| 56 | #define DDR_TIMING_CFG_2 0x0040d120 |
| 57 | #define DDR_TIMING_CFG_3 0x010e1000 |
| 58 | #define DDR_TIMING_CFG_4 0x00000001 |
| 59 | #define DDR_TIMING_CFG_5 0x03401400 |
| 60 | #define DDR_SDRAM_CFG_2 0x00401010 |
| 61 | #define DDR_SDRAM_MODE 0x00061c60 |
| 62 | #define DDR_SDRAM_MODE_2 0x00180000 |
| 63 | #define DDR_SDRAM_INTERVAL 0x18600618 |
| 64 | #define DDR_DDR_WRLVL_CNTL 0x8655f605 |
| 65 | #define DDR_DDR_WRLVL_CNTL_2 0x05060607 |
| 66 | #define DDR_DDR_WRLVL_CNTL_3 0x05050505 |
| 67 | #define DDR_DDR_CDR1 0x80040000 |
| 68 | #define DDR_DDR_CDR2 0x00000001 |
| 69 | #define DDR_SDRAM_CLK_CNTL 0x02000000 |
| 70 | #define DDR_DDR_ZQ_CNTL 0x89080600 |
| 71 | #define DDR_CS0_CONFIG_2 0 |
| 72 | #define DDR_SDRAM_CFG_MEM_EN 0x80000000 |
| 73 | #define SDRAM_CFG2_D_INIT 0x00000010 |
| 74 | #define DDR_CDR2_VREF_TRAIN_EN 0x00000080 |
| 75 | #define SDRAM_CFG2_FRC_SR 0x80000000 |
| 76 | #define SDRAM_CFG_BI 0x00000001 |
| 77 | |
| 78 | #ifdef CONFIG_RAMBOOT_PBL |
| 79 | #define CONFIG_SYS_FSL_PBL_PBI \ |
| 80 | board/freescale/ls1021aiot/ls102xa_pbi.cfg |
| 81 | #endif |
| 82 | |
| 83 | #ifdef CONFIG_SD_BOOT |
| 84 | #define CONFIG_SYS_FSL_PBL_RCW \ |
| 85 | board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg |
| 86 | #define CONFIG_SPL_FRAMEWORK |
| 87 | #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" |
| 88 | #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| 89 | #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| 90 | #define CONFIG_SPL_ENV_SUPPORT |
| 91 | #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| 92 | #define CONFIG_SPL_I2C_SUPPORT |
| 93 | #define CONFIG_SPL_WATCHDOG_SUPPORT |
| 94 | #define CONFIG_SPL_SERIAL_SUPPORT |
| 95 | #define CONFIG_SPL_MMC_SUPPORT |
| 96 | #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 97 | |
| 98 | #define CONFIG_SPL_TEXT_BASE 0x10000000 |
| 99 | #define CONFIG_SPL_MAX_SIZE 0x1a000 |
| 100 | #define CONFIG_SPL_STACK 0x1001d000 |
| 101 | #define CONFIG_SPL_PAD_TO 0x1c000 |
| 102 | #define CONFIG_SYS_TEXT_BASE 0x82000000 |
| 103 | |
| 104 | #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ |
| 105 | CONFIG_SYS_MONITOR_LEN) |
| 106 | #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 |
| 107 | #define CONFIG_SPL_BSS_START_ADDR 0x80100000 |
| 108 | #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 |
| 109 | #define CONFIG_SYS_MONITOR_LEN 0x80000 |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 110 | #endif |
| 111 | |
| 112 | #ifdef CONFIG_QSPI_BOOT |
| 113 | #define CONFIG_SYS_TEXT_BASE 0x40010000 |
| 114 | #endif |
| 115 | |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 116 | #define CONFIG_NR_DRAM_BANKS 1 |
| 117 | |
| 118 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL |
| 119 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE |
| 120 | |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 121 | /* |
| 122 | * Serial Port |
| 123 | */ |
| 124 | #define CONFIG_CONS_INDEX 1 |
| 125 | #define CONFIG_SYS_NS16550_SERIAL |
| 126 | #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| 127 | #define CONFIG_SYS_NS16550_CLK get_serial_clock() |
| 128 | #define CONFIG_BAUDRATE 115200 |
| 129 | |
| 130 | /* |
| 131 | * I2C |
| 132 | */ |
| 133 | #define CONFIG_CMD_I2C |
| 134 | #define CONFIG_SYS_I2C |
| 135 | #define CONFIG_SYS_I2C_MXC |
| 136 | #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ |
| 137 | #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ |
| 138 | #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ |
| 139 | |
| 140 | /* EEPROM */ |
| 141 | #define CONFIG_ID_EEPROM |
| 142 | #define CONFIG_SYS_I2C_EEPROM_NXID |
| 143 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 |
| 144 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 |
| 145 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
| 146 | |
| 147 | /* |
| 148 | * MMC |
| 149 | */ |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 150 | #define CONFIG_CMD_MMC |
| 151 | #define CONFIG_FSL_ESDHC |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 152 | |
| 153 | /* SATA */ |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 154 | #define CONFIG_CMD_SCSI |
| 155 | #define CONFIG_LIBATA |
| 156 | #define CONFIG_SCSI_AHCI |
| 157 | #define CONFIG_SCSI_AHCI_PLAT |
| 158 | #ifndef PCI_DEVICE_ID_FREESCALE_AHCI |
| 159 | #define PCI_DEVICE_ID_FREESCALE_AHCI 0x0440 |
| 160 | #endif |
| 161 | #define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_FREESCALE, \ |
| 162 | PCI_DEVICE_ID_FREESCALE_AHCI} |
| 163 | |
| 164 | #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 |
| 165 | #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| 166 | #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ |
| 167 | CONFIG_SYS_SCSI_MAX_LUN) |
| 168 | |
| 169 | #define CONFIG_CMD_FAT |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 170 | |
| 171 | /* SPI */ |
| 172 | #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) |
| 173 | #define CONFIG_SPI_FLASH_SPANSION |
| 174 | |
| 175 | /* QSPI */ |
| 176 | #define QSPI0_AMBA_BASE 0x40000000 |
| 177 | #define FSL_QSPI_FLASH_SIZE (1 << 24) |
| 178 | #define FSL_QSPI_FLASH_NUM 2 |
| 179 | #define CONFIG_SPI_FLASH_BAR |
| 180 | #define CONFIG_SPI_FLASH_SPANSION |
| 181 | #endif |
| 182 | |
| 183 | /* DM SPI */ |
| 184 | #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) |
| 185 | #define CONFIG_CMD_SF |
| 186 | #define CONFIG_DM_SPI_FLASH |
| 187 | #endif |
| 188 | |
| 189 | /* |
| 190 | * eTSEC |
| 191 | */ |
| 192 | #define CONFIG_TSEC_ENET |
| 193 | |
| 194 | #ifdef CONFIG_TSEC_ENET |
| 195 | #define CONFIG_MII |
| 196 | #define CONFIG_MII_DEFAULT_TSEC 1 |
| 197 | #define CONFIG_TSEC1 1 |
| 198 | #define CONFIG_TSEC1_NAME "eTSEC1" |
| 199 | #define CONFIG_TSEC2 1 |
| 200 | #define CONFIG_TSEC2_NAME "eTSEC2" |
| 201 | |
| 202 | #define TSEC1_PHY_ADDR 1 |
| 203 | #define TSEC2_PHY_ADDR 3 |
| 204 | |
| 205 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| 206 | #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
| 207 | |
| 208 | #define TSEC1_PHYIDX 0 |
| 209 | #define TSEC2_PHYIDX 0 |
| 210 | |
| 211 | #define CONFIG_ETHPRIME "eTSEC2" |
| 212 | |
| 213 | #define CONFIG_PHY_GIGE |
| 214 | #define CONFIG_PHYLIB |
| 215 | #define CONFIG_PHY_ATHEROS |
| 216 | |
| 217 | #define CONFIG_HAS_ETH0 |
| 218 | #define CONFIG_HAS_ETH1 |
| 219 | #define CONFIG_HAS_ETH2 |
| 220 | #endif |
| 221 | |
| 222 | /* PCIe */ |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 223 | #define CONFIG_PCIE1 /* PCIE controler 1 */ |
| 224 | #define CONFIG_PCIE2 /* PCIE controler 2 */ |
| 225 | |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 226 | #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" |
| 227 | |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 228 | #ifdef CONFIG_PCI |
Feng Li | 39e112d | 2016-11-03 14:15:17 +0800 | [diff] [blame] | 229 | #define CONFIG_PCI_SCAN_SHOW |
| 230 | #define CONFIG_CMD_PCI |
| 231 | #endif |
| 232 | |
| 233 | #define CONFIG_CMD_PING |
| 234 | #define CONFIG_CMD_DHCP |
| 235 | #define CONFIG_CMD_MII |
| 236 | |
| 237 | #define CONFIG_CMDLINE_TAG |
| 238 | #define CONFIG_CMDLINE_EDITING |
| 239 | |
| 240 | #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT) |
| 241 | #undef CONFIG_CMD_IMLS |
| 242 | #endif |
| 243 | |
| 244 | #define CONFIG_PEN_ADDR_BIG_ENDIAN |
| 245 | #define CONFIG_LAYERSCAPE_NS_ACCESS |
| 246 | #define CONFIG_SMP_PEN_ADDR 0x01ee0200 |
| 247 | #define CONFIG_TIMER_CLK_FREQ 12500000 |
| 248 | |
| 249 | #define CONFIG_HWCONFIG |
| 250 | #define HWCONFIG_BUFFER_SIZE 256 |
| 251 | |
| 252 | #define CONFIG_FSL_DEVICE_DISABLE |
| 253 | |
| 254 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 255 | "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ |
| 256 | "initrd_high=0xffffffff\0" \ |
| 257 | "fdt_high=0xffffffff\0" |
| 258 | |
| 259 | /* |
| 260 | * Miscellaneous configurable options |
| 261 | */ |
| 262 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| 263 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| 264 | #define CONFIG_AUTO_COMPLETE |
| 265 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| 266 | #define CONFIG_SYS_PBSIZE \ |
| 267 | (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| 268 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| 269 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| 270 | |
| 271 | #define CONFIG_CMD_GREPENV |
| 272 | #define CONFIG_CMD_MEMINFO |
| 273 | |
| 274 | #define CONFIG_SYS_LOAD_ADDR 0x82000000 |
| 275 | |
| 276 | #define CONFIG_LS102XA_STREAM_ID |
| 277 | |
| 278 | /* |
| 279 | * Stack sizes |
| 280 | * The stack sizes are set up in start.S using the settings below |
| 281 | */ |
| 282 | #define CONFIG_STACKSIZE (30 * 1024) |
| 283 | |
| 284 | #define CONFIG_SYS_INIT_SP_OFFSET \ |
| 285 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| 286 | #define CONFIG_SYS_INIT_SP_ADDR \ |
| 287 | (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| 288 | |
| 289 | #ifdef CONFIG_SPL_BUILD |
| 290 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE |
| 291 | #else |
| 292 | /* start of monitor */ |
| 293 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| 294 | #endif |
| 295 | |
| 296 | #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 |
| 297 | |
| 298 | /* |
| 299 | * Environment |
| 300 | */ |
| 301 | |
| 302 | #define CONFIG_ENV_OVERWRITE |
| 303 | |
| 304 | #if defined(CONFIG_SD_BOOT) |
| 305 | #define CONFIG_ENV_OFFSET 0x100000 |
| 306 | #define CONFIG_ENV_IS_IN_MMC |
| 307 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 308 | #define CONFIG_ENV_SIZE 0x2000 |
| 309 | #elif defined(CONFIG_QSPI_BOOT) |
| 310 | #define CONFIG_ENV_IS_IN_SPI_FLASH |
| 311 | #define CONFIG_ENV_SIZE 0x2000 |
| 312 | #define CONFIG_ENV_OFFSET 0x100000 |
| 313 | #define CONFIG_ENV_SECT_SIZE 0x10000 |
| 314 | #endif |
| 315 | |
| 316 | #define CONFIG_OF_BOARD_SETUP |
| 317 | #define CONFIG_OF_STDOUT_VIA_ALIAS |
| 318 | #define CONFIG_CMD_BOOTZ |
| 319 | |
| 320 | #define CONFIG_MISC_INIT_R |
| 321 | |
| 322 | /* Hash command with SHA acceleration supported in hardware */ |
| 323 | |
| 324 | #ifdef CONFIG_FSL_CAAM |
| 325 | |
| 326 | #define CONFIG_CMD_HASH |
| 327 | |
| 328 | #define CONFIG_SHA_HW_ACCEL |
| 329 | |
| 330 | #endif |
| 331 | |
| 332 | #include <asm/fsl_secure_boot.h> |
| 333 | |
| 334 | #endif |