Stefan Roese | 5f1cf2d | 2006-08-15 14:15:51 +0200 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2006 |
| 3 | * Heiko Schocher, hs@denx.de |
| 4 | * Based on ACE1XK.c |
| 5 | * |
| 6 | * See file CREDITS for list of people who contributed to this |
| 7 | * project. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License as |
| 11 | * published by the Free Software Foundation; either version 2 of |
| 12 | * the License, or (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 22 | * MA 02111-1307 USA |
| 23 | * |
| 24 | */ |
| 25 | |
| 26 | #include <common.h> /* core U-Boot definitions */ |
| 27 | #include <altera.h> |
| 28 | #include <ACEX1K.h> /* ACEX device family */ |
| 29 | |
Stefan Roese | 5f1cf2d | 2006-08-15 14:15:51 +0200 | [diff] [blame] | 30 | /* Define FPGA_DEBUG to get debug printf's */ |
| 31 | #ifdef FPGA_DEBUG |
| 32 | #define PRINTF(fmt,args...) printf (fmt ,##args) |
| 33 | #else |
| 34 | #define PRINTF(fmt,args...) |
| 35 | #endif |
| 36 | |
| 37 | /* Note: The assumption is that we cannot possibly run fast enough to |
| 38 | * overrun the device (the Slave Parallel mode can free run at 50MHz). |
| 39 | * If there is a need to operate slower, define CONFIG_FPGA_DELAY in |
| 40 | * the board config file to slow things down. |
| 41 | */ |
| 42 | #ifndef CONFIG_FPGA_DELAY |
| 43 | #define CONFIG_FPGA_DELAY() |
| 44 | #endif |
| 45 | |
| 46 | #ifndef CFG_FPGA_WAIT |
| 47 | #define CFG_FPGA_WAIT CFG_HZ/10 /* 100 ms */ |
| 48 | #endif |
| 49 | |
| 50 | static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize ); |
| 51 | static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize ); |
| 52 | /* static int CYC2_ps_info( Altera_desc *desc ); */ |
| 53 | static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset ); |
| 54 | |
| 55 | /* ------------------------------------------------------------------------- */ |
| 56 | /* CYCLON2 Generic Implementation */ |
| 57 | int CYC2_load (Altera_desc * desc, void *buf, size_t bsize) |
| 58 | { |
| 59 | int ret_val = FPGA_FAIL; |
| 60 | |
| 61 | switch (desc->iface) { |
| 62 | case passive_serial: |
| 63 | PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__); |
| 64 | ret_val = CYC2_ps_load (desc, buf, bsize); |
| 65 | break; |
| 66 | |
| 67 | /* Add new interface types here */ |
| 68 | |
| 69 | default: |
| 70 | printf ("%s: Unsupported interface type, %d\n", |
| 71 | __FUNCTION__, desc->iface); |
| 72 | } |
| 73 | |
| 74 | return ret_val; |
| 75 | } |
| 76 | |
| 77 | int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize) |
| 78 | { |
| 79 | int ret_val = FPGA_FAIL; |
| 80 | |
| 81 | switch (desc->iface) { |
| 82 | case passive_serial: |
| 83 | PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__); |
| 84 | ret_val = CYC2_ps_dump (desc, buf, bsize); |
| 85 | break; |
| 86 | |
| 87 | /* Add new interface types here */ |
| 88 | |
| 89 | default: |
| 90 | printf ("%s: Unsupported interface type, %d\n", |
| 91 | __FUNCTION__, desc->iface); |
| 92 | } |
| 93 | |
| 94 | return ret_val; |
| 95 | } |
| 96 | |
| 97 | int CYC2_info( Altera_desc *desc ) |
| 98 | { |
| 99 | return FPGA_SUCCESS; |
| 100 | } |
| 101 | |
| 102 | int CYC2_reloc (Altera_desc * desc, ulong reloc_offset) |
| 103 | { |
| 104 | int ret_val = FPGA_FAIL; /* assume a failure */ |
| 105 | |
| 106 | if (desc->family != Altera_CYC2) { |
| 107 | printf ("%s: Unsupported family type, %d\n", |
| 108 | __FUNCTION__, desc->family); |
| 109 | return FPGA_FAIL; |
| 110 | } else |
| 111 | switch (desc->iface) { |
| 112 | case passive_serial: |
| 113 | ret_val = CYC2_ps_reloc (desc, reloc_offset); |
| 114 | break; |
| 115 | |
| 116 | /* Add new interface types here */ |
| 117 | |
| 118 | default: |
| 119 | printf ("%s: Unsupported interface type, %d\n", |
| 120 | __FUNCTION__, desc->iface); |
| 121 | } |
| 122 | |
| 123 | return ret_val; |
| 124 | } |
| 125 | |
| 126 | /* ------------------------------------------------------------------------- */ |
| 127 | /* CYCLON2 Passive Serial Generic Implementation */ |
| 128 | static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize) |
| 129 | { |
| 130 | int ret_val = FPGA_FAIL; /* assume the worst */ |
| 131 | Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns; |
| 132 | int ret = 0; |
| 133 | |
| 134 | PRINTF ("%s: start with interface functions @ 0x%p\n", |
| 135 | __FUNCTION__, fn); |
| 136 | |
| 137 | if (fn) { |
| 138 | int cookie = desc->cookie; /* make a local copy */ |
| 139 | unsigned long ts; /* timestamp */ |
| 140 | |
| 141 | PRINTF ("%s: Function Table:\n" |
| 142 | "ptr:\t0x%p\n" |
| 143 | "struct: 0x%p\n" |
| 144 | "config:\t0x%p\n" |
| 145 | "status:\t0x%p\n" |
| 146 | "write:\t0x%p\n" |
| 147 | "done:\t0x%p\n\n", |
| 148 | __FUNCTION__, &fn, fn, fn->config, fn->status, |
| 149 | fn->write, fn->done); |
| 150 | #ifdef CFG_FPGA_PROG_FEEDBACK |
| 151 | printf ("Loading FPGA Device %d...", cookie); |
| 152 | #endif |
| 153 | |
| 154 | /* |
| 155 | * Run the pre configuration function if there is one. |
| 156 | */ |
| 157 | if (*fn->pre) { |
| 158 | (*fn->pre) (cookie); |
| 159 | } |
| 160 | |
| 161 | /* Establish the initial state */ |
| 162 | (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */ |
| 163 | |
| 164 | udelay(2); /* T_cfg > 2us */ |
| 165 | |
| 166 | /* Wait for nSTATUS to be asserted */ |
| 167 | ts = get_timer (0); /* get current time */ |
| 168 | do { |
| 169 | CONFIG_FPGA_DELAY (); |
| 170 | if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */ |
| 171 | puts ("** Timeout waiting for STATUS to go high.\n"); |
| 172 | (*fn->abort) (cookie); |
| 173 | return FPGA_FAIL; |
| 174 | } |
| 175 | } while (!(*fn->status) (cookie)); |
| 176 | |
| 177 | /* Get ready for the burn */ |
| 178 | CONFIG_FPGA_DELAY (); |
| 179 | |
| 180 | ret = (*fn->write) (buf, bsize, TRUE, cookie); |
| 181 | if (ret) { |
| 182 | puts ("** Write failed.\n"); |
| 183 | (*fn->abort) (cookie); |
| 184 | return FPGA_FAIL; |
| 185 | } |
| 186 | #ifdef CFG_FPGA_PROG_FEEDBACK |
| 187 | puts(" OK? ..."); |
| 188 | #endif |
| 189 | |
| 190 | CONFIG_FPGA_DELAY (); |
| 191 | |
| 192 | #ifdef CFG_FPGA_PROG_FEEDBACK |
| 193 | putc (' '); /* terminate the dotted line */ |
| 194 | #endif |
| 195 | |
| 196 | /* |
| 197 | * Checking FPGA's CONF_DONE signal - correctly booted ? |
| 198 | */ |
| 199 | |
| 200 | if ( ! (*fn->done) (cookie) ) { |
| 201 | puts ("** Booting failed! CONF_DONE is still deasserted.\n"); |
| 202 | (*fn->abort) (cookie); |
| 203 | return (FPGA_FAIL); |
| 204 | } |
| 205 | #ifdef CFG_FPGA_PROG_FEEDBACK |
| 206 | puts(" OK\n"); |
| 207 | #endif |
| 208 | |
| 209 | ret_val = FPGA_SUCCESS; |
| 210 | |
| 211 | #ifdef CFG_FPGA_PROG_FEEDBACK |
| 212 | if (ret_val == FPGA_SUCCESS) { |
| 213 | puts ("Done.\n"); |
| 214 | } |
| 215 | else { |
| 216 | puts ("Fail.\n"); |
| 217 | } |
| 218 | #endif |
| 219 | (*fn->post) (cookie); |
| 220 | |
| 221 | } else { |
| 222 | printf ("%s: NULL Interface function table!\n", __FUNCTION__); |
| 223 | } |
| 224 | |
| 225 | return ret_val; |
| 226 | } |
| 227 | |
| 228 | static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize) |
| 229 | { |
| 230 | /* Readback is only available through the Slave Parallel and */ |
| 231 | /* boundary-scan interfaces. */ |
| 232 | printf ("%s: Passive Serial Dumping is unavailable\n", |
| 233 | __FUNCTION__); |
| 234 | return FPGA_FAIL; |
| 235 | } |
| 236 | |
| 237 | static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset) |
| 238 | { |
| 239 | int ret_val = FPGA_FAIL; /* assume the worst */ |
| 240 | Altera_CYC2_Passive_Serial_fns *fn_r, *fn = |
| 241 | (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns); |
| 242 | |
| 243 | if (fn) { |
| 244 | ulong addr; |
| 245 | |
| 246 | /* Get the relocated table address */ |
| 247 | addr = (ulong) fn + reloc_offset; |
| 248 | fn_r = (Altera_CYC2_Passive_Serial_fns *) addr; |
| 249 | |
| 250 | if (!fn_r->relocated) { |
| 251 | |
| 252 | if (memcmp (fn_r, fn, |
| 253 | sizeof (Altera_CYC2_Passive_Serial_fns)) |
| 254 | == 0) { |
| 255 | /* good copy of the table, fix the descriptor pointer */ |
| 256 | desc->iface_fns = fn_r; |
| 257 | } else { |
| 258 | PRINTF ("%s: Invalid function table at 0x%p\n", |
| 259 | __FUNCTION__, fn_r); |
| 260 | return FPGA_FAIL; |
| 261 | } |
| 262 | |
| 263 | PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__, |
| 264 | desc); |
| 265 | |
| 266 | addr = (ulong) (fn->pre) + reloc_offset; |
| 267 | fn_r->pre = (Altera_pre_fn) addr; |
| 268 | |
| 269 | addr = (ulong) (fn->config) + reloc_offset; |
| 270 | fn_r->config = (Altera_config_fn) addr; |
| 271 | |
| 272 | addr = (ulong) (fn->status) + reloc_offset; |
| 273 | fn_r->status = (Altera_status_fn) addr; |
| 274 | |
| 275 | addr = (ulong) (fn->done) + reloc_offset; |
| 276 | fn_r->done = (Altera_done_fn) addr; |
| 277 | |
| 278 | addr = (ulong) (fn->write) + reloc_offset; |
| 279 | fn_r->write = (Altera_write_fn) addr; |
| 280 | |
| 281 | addr = (ulong) (fn->abort) + reloc_offset; |
| 282 | fn_r->abort = (Altera_abort_fn) addr; |
| 283 | |
| 284 | addr = (ulong) (fn->post) + reloc_offset; |
| 285 | fn_r->post = (Altera_post_fn) addr; |
| 286 | |
| 287 | fn_r->relocated = TRUE; |
| 288 | |
| 289 | } else { |
| 290 | /* this table has already been moved */ |
| 291 | /* XXX - should check to see if the descriptor is correct */ |
| 292 | desc->iface_fns = fn_r; |
| 293 | } |
| 294 | |
| 295 | ret_val = FPGA_SUCCESS; |
| 296 | } else { |
| 297 | printf ("%s: NULL Interface function table!\n", __FUNCTION__); |
| 298 | } |
| 299 | |
| 300 | return ret_val; |
| 301 | } |