Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
maxims@google.com | 7f61331 | 2017-04-17 12:00:30 -0700 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2012-2020 ASPEED Technology Inc. |
| 4 | * Copyright 2016 IBM Corporation |
| 5 | * Copyright 2017 Google, Inc. |
maxims@google.com | 7f61331 | 2017-04-17 12:00:30 -0700 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <clk.h> |
| 10 | #include <dm.h> |
| 11 | #include <errno.h> |
| 12 | #include <fdtdec.h> |
| 13 | #include <i2c.h> |
Simon Glass | 0f2af88 | 2020-05-10 11:40:05 -0600 | [diff] [blame] | 14 | #include <log.h> |
maxims@google.com | 7f61331 | 2017-04-17 12:00:30 -0700 | [diff] [blame] | 15 | #include <asm/io.h> |
| 16 | #include <asm/arch/scu_ast2500.h> |
Simon Glass | dbd7954 | 2020-05-10 11:40:11 -0600 | [diff] [blame] | 17 | #include <linux/delay.h> |
Simon Glass | d66c5f7 | 2020-02-03 07:36:15 -0700 | [diff] [blame] | 18 | #include <linux/err.h> |
maxims@google.com | 7f61331 | 2017-04-17 12:00:30 -0700 | [diff] [blame] | 19 | |
| 20 | #include "ast_i2c.h" |
| 21 | |
| 22 | #define I2C_TIMEOUT_US 100000 |
| 23 | #define I2C_SLEEP_STEP_US 20 |
| 24 | |
| 25 | #define HIGHSPEED_TTIMEOUT 3 |
| 26 | |
maxims@google.com | 7f61331 | 2017-04-17 12:00:30 -0700 | [diff] [blame] | 27 | /* |
| 28 | * Device private data |
| 29 | */ |
| 30 | struct ast_i2c_priv { |
| 31 | /* This device's clock */ |
| 32 | struct clk clk; |
| 33 | /* Device registers */ |
| 34 | struct ast_i2c_regs *regs; |
| 35 | /* I2C speed in Hz */ |
| 36 | int speed; |
| 37 | }; |
| 38 | |
| 39 | /* |
| 40 | * Given desired divider ratio, return the value that needs to be set |
| 41 | * in Clock and AC Timing Control register |
| 42 | */ |
| 43 | static u32 get_clk_reg_val(ulong divider_ratio) |
| 44 | { |
| 45 | ulong inc = 0, div; |
| 46 | ulong scl_low, scl_high, data; |
| 47 | |
| 48 | for (div = 0; divider_ratio >= 16; div++) { |
| 49 | inc |= (divider_ratio & 1); |
| 50 | divider_ratio >>= 1; |
| 51 | } |
| 52 | divider_ratio += inc; |
| 53 | scl_low = (divider_ratio >> 1) - 1; |
| 54 | scl_high = divider_ratio - scl_low - 2; |
| 55 | data = I2CD_CACTC_BASE |
| 56 | | (scl_high << I2CD_TCKHIGH_SHIFT) |
| 57 | | (scl_low << I2CD_TCKLOW_SHIFT) |
| 58 | | (div << I2CD_BASE_DIV_SHIFT); |
| 59 | |
| 60 | return data; |
| 61 | } |
| 62 | |
| 63 | static void ast_i2c_clear_interrupts(struct udevice *dev) |
| 64 | { |
| 65 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 66 | |
| 67 | writel(~0, &priv->regs->isr); |
| 68 | } |
| 69 | |
| 70 | static void ast_i2c_init_bus(struct udevice *dev) |
| 71 | { |
| 72 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 73 | |
| 74 | /* Reset device */ |
| 75 | writel(0, &priv->regs->fcr); |
| 76 | /* Enable Master Mode. Assuming single-master */ |
| 77 | writel(I2CD_MASTER_EN |
| 78 | | I2CD_M_SDA_LOCK_EN |
| 79 | | I2CD_MULTI_MASTER_DIS | I2CD_M_SCL_DRIVE_EN, |
| 80 | &priv->regs->fcr); |
| 81 | /* Enable Interrupts */ |
| 82 | writel(I2CD_INTR_TX_ACK |
| 83 | | I2CD_INTR_TX_NAK |
| 84 | | I2CD_INTR_RX_DONE |
| 85 | | I2CD_INTR_BUS_RECOVER_DONE |
| 86 | | I2CD_INTR_NORMAL_STOP |
| 87 | | I2CD_INTR_ABNORMAL, &priv->regs->icr); |
| 88 | } |
| 89 | |
| 90 | static int ast_i2c_ofdata_to_platdata(struct udevice *dev) |
| 91 | { |
| 92 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 93 | int ret; |
| 94 | |
Simon Glass | ba1dea4 | 2017-05-17 17:18:05 -0600 | [diff] [blame] | 95 | priv->regs = devfdt_get_addr_ptr(dev); |
maxims@google.com | 7f61331 | 2017-04-17 12:00:30 -0700 | [diff] [blame] | 96 | if (IS_ERR(priv->regs)) |
| 97 | return PTR_ERR(priv->regs); |
| 98 | |
| 99 | ret = clk_get_by_index(dev, 0, &priv->clk); |
| 100 | if (ret < 0) { |
| 101 | debug("%s: Can't get clock for %s: %d\n", __func__, dev->name, |
| 102 | ret); |
| 103 | return ret; |
| 104 | } |
| 105 | |
| 106 | return 0; |
| 107 | } |
| 108 | |
| 109 | static int ast_i2c_probe(struct udevice *dev) |
| 110 | { |
| 111 | struct ast2500_scu *scu; |
| 112 | |
| 113 | debug("Enabling I2C%u\n", dev->seq); |
| 114 | |
| 115 | /* |
| 116 | * Get all I2C devices out of Reset. |
| 117 | * Only needs to be done once, but doing it for every |
| 118 | * device does not hurt. |
| 119 | */ |
| 120 | scu = ast_get_scu(); |
| 121 | ast_scu_unlock(scu); |
| 122 | clrbits_le32(&scu->sysreset_ctrl1, SCU_SYSRESET_I2C); |
| 123 | ast_scu_lock(scu); |
| 124 | |
| 125 | ast_i2c_init_bus(dev); |
| 126 | |
| 127 | return 0; |
| 128 | } |
| 129 | |
| 130 | static int ast_i2c_wait_isr(struct udevice *dev, u32 flag) |
| 131 | { |
| 132 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 133 | int timeout = I2C_TIMEOUT_US; |
| 134 | |
| 135 | while (!(readl(&priv->regs->isr) & flag) && timeout > 0) { |
| 136 | udelay(I2C_SLEEP_STEP_US); |
| 137 | timeout -= I2C_SLEEP_STEP_US; |
| 138 | } |
| 139 | |
| 140 | ast_i2c_clear_interrupts(dev); |
| 141 | if (timeout <= 0) |
| 142 | return -ETIMEDOUT; |
| 143 | |
| 144 | return 0; |
| 145 | } |
| 146 | |
| 147 | static int ast_i2c_send_stop(struct udevice *dev) |
| 148 | { |
| 149 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 150 | |
| 151 | writel(I2CD_M_STOP_CMD, &priv->regs->csr); |
| 152 | |
| 153 | return ast_i2c_wait_isr(dev, I2CD_INTR_NORMAL_STOP); |
| 154 | } |
| 155 | |
| 156 | static int ast_i2c_wait_tx(struct udevice *dev) |
| 157 | { |
| 158 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 159 | int timeout = I2C_TIMEOUT_US; |
| 160 | u32 flag = I2CD_INTR_TX_ACK | I2CD_INTR_TX_NAK; |
| 161 | u32 status = readl(&priv->regs->isr) & flag; |
| 162 | int ret = 0; |
| 163 | |
| 164 | while (!status && timeout > 0) { |
| 165 | status = readl(&priv->regs->isr) & flag; |
| 166 | udelay(I2C_SLEEP_STEP_US); |
| 167 | timeout -= I2C_SLEEP_STEP_US; |
| 168 | } |
| 169 | |
| 170 | if (status == I2CD_INTR_TX_NAK) |
| 171 | ret = -EREMOTEIO; |
| 172 | |
| 173 | if (timeout <= 0) |
| 174 | ret = -ETIMEDOUT; |
| 175 | |
| 176 | ast_i2c_clear_interrupts(dev); |
| 177 | |
| 178 | return ret; |
| 179 | } |
| 180 | |
| 181 | static int ast_i2c_start_txn(struct udevice *dev, uint devaddr) |
| 182 | { |
| 183 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 184 | |
| 185 | /* Start and Send Device Address */ |
| 186 | writel(devaddr, &priv->regs->trbbr); |
| 187 | writel(I2CD_M_START_CMD | I2CD_M_TX_CMD, &priv->regs->csr); |
| 188 | |
| 189 | return ast_i2c_wait_tx(dev); |
| 190 | } |
| 191 | |
| 192 | static int ast_i2c_read_data(struct udevice *dev, u8 chip_addr, u8 *buffer, |
| 193 | size_t len, bool send_stop) |
| 194 | { |
| 195 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 196 | u32 i2c_cmd = I2CD_M_RX_CMD; |
| 197 | int ret; |
| 198 | |
| 199 | ret = ast_i2c_start_txn(dev, (chip_addr << 1) | I2C_M_RD); |
| 200 | if (ret < 0) |
| 201 | return ret; |
| 202 | |
| 203 | for (; len > 0; len--, buffer++) { |
| 204 | if (len == 1) |
| 205 | i2c_cmd |= I2CD_M_S_RX_CMD_LAST; |
| 206 | writel(i2c_cmd, &priv->regs->csr); |
| 207 | ret = ast_i2c_wait_isr(dev, I2CD_INTR_RX_DONE); |
| 208 | if (ret < 0) |
| 209 | return ret; |
| 210 | *buffer = (readl(&priv->regs->trbbr) & I2CD_RX_DATA_MASK) |
| 211 | >> I2CD_RX_DATA_SHIFT; |
| 212 | } |
| 213 | ast_i2c_clear_interrupts(dev); |
| 214 | |
| 215 | if (send_stop) |
| 216 | return ast_i2c_send_stop(dev); |
| 217 | |
| 218 | return 0; |
| 219 | } |
| 220 | |
| 221 | static int ast_i2c_write_data(struct udevice *dev, u8 chip_addr, u8 |
| 222 | *buffer, size_t len, bool send_stop) |
| 223 | { |
| 224 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 225 | int ret; |
| 226 | |
| 227 | ret = ast_i2c_start_txn(dev, (chip_addr << 1)); |
| 228 | if (ret < 0) |
| 229 | return ret; |
| 230 | |
| 231 | for (; len > 0; len--, buffer++) { |
| 232 | writel(*buffer, &priv->regs->trbbr); |
| 233 | writel(I2CD_M_TX_CMD, &priv->regs->csr); |
| 234 | ret = ast_i2c_wait_tx(dev); |
| 235 | if (ret < 0) |
| 236 | return ret; |
| 237 | } |
| 238 | |
| 239 | if (send_stop) |
| 240 | return ast_i2c_send_stop(dev); |
| 241 | |
| 242 | return 0; |
| 243 | } |
| 244 | |
| 245 | static int ast_i2c_deblock(struct udevice *dev) |
| 246 | { |
| 247 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 248 | struct ast_i2c_regs *regs = priv->regs; |
| 249 | u32 csr = readl(®s->csr); |
| 250 | bool sda_high = csr & I2CD_SDA_LINE_STS; |
| 251 | bool scl_high = csr & I2CD_SCL_LINE_STS; |
| 252 | int ret = 0; |
| 253 | |
| 254 | if (sda_high && scl_high) { |
| 255 | /* Bus is idle, no deblocking needed. */ |
| 256 | return 0; |
| 257 | } else if (sda_high) { |
| 258 | /* Send stop command */ |
| 259 | debug("Unterminated TXN in (%x), sending stop\n", csr); |
| 260 | ret = ast_i2c_send_stop(dev); |
| 261 | } else if (scl_high) { |
| 262 | /* Possibly stuck slave */ |
| 263 | debug("Bus stuck (%x), attempting recovery\n", csr); |
| 264 | writel(I2CD_BUS_RECOVER_CMD, ®s->csr); |
| 265 | ret = ast_i2c_wait_isr(dev, I2CD_INTR_BUS_RECOVER_DONE); |
| 266 | } else { |
| 267 | /* Just try to reinit the device. */ |
| 268 | ast_i2c_init_bus(dev); |
| 269 | } |
| 270 | |
| 271 | return ret; |
| 272 | } |
| 273 | |
| 274 | static int ast_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs) |
| 275 | { |
| 276 | int ret; |
| 277 | |
| 278 | ret = ast_i2c_deblock(dev); |
| 279 | if (ret < 0) |
| 280 | return ret; |
| 281 | |
| 282 | debug("i2c_xfer: %d messages\n", nmsgs); |
| 283 | for (; nmsgs > 0; nmsgs--, msg++) { |
| 284 | if (msg->flags & I2C_M_RD) { |
| 285 | debug("i2c_read: chip=0x%x, len=0x%x, flags=0x%x\n", |
| 286 | msg->addr, msg->len, msg->flags); |
| 287 | ret = ast_i2c_read_data(dev, msg->addr, msg->buf, |
| 288 | msg->len, (nmsgs == 1)); |
| 289 | } else { |
| 290 | debug("i2c_write: chip=0x%x, len=0x%x, flags=0x%x\n", |
| 291 | msg->addr, msg->len, msg->flags); |
| 292 | ret = ast_i2c_write_data(dev, msg->addr, msg->buf, |
| 293 | msg->len, (nmsgs == 1)); |
| 294 | } |
| 295 | if (ret) { |
| 296 | debug("%s: error (%d)\n", __func__, ret); |
| 297 | return -EREMOTEIO; |
| 298 | } |
| 299 | } |
| 300 | |
| 301 | return 0; |
| 302 | } |
| 303 | |
| 304 | static int ast_i2c_set_speed(struct udevice *dev, unsigned int speed) |
| 305 | { |
| 306 | struct ast_i2c_priv *priv = dev_get_priv(dev); |
| 307 | struct ast_i2c_regs *regs = priv->regs; |
| 308 | ulong i2c_rate, divider; |
| 309 | |
| 310 | debug("Setting speed for I2C%d to <%u>\n", dev->seq, speed); |
| 311 | if (!speed) { |
| 312 | debug("No valid speed specified\n"); |
| 313 | return -EINVAL; |
| 314 | } |
| 315 | |
| 316 | i2c_rate = clk_get_rate(&priv->clk); |
| 317 | divider = i2c_rate / speed; |
| 318 | |
| 319 | priv->speed = speed; |
Simon Glass | 712e149 | 2020-01-23 11:48:17 -0700 | [diff] [blame] | 320 | if (speed > I2C_SPEED_FAST_RATE) { |
maxims@google.com | 7f61331 | 2017-04-17 12:00:30 -0700 | [diff] [blame] | 321 | debug("Enable High Speed\n"); |
| 322 | setbits_le32(®s->fcr, I2CD_M_HIGH_SPEED_EN |
| 323 | | I2CD_M_SDA_DRIVE_1T_EN |
| 324 | | I2CD_SDA_DRIVE_1T_EN); |
| 325 | writel(HIGHSPEED_TTIMEOUT, ®s->cactcr2); |
| 326 | } else { |
| 327 | debug("Enabling Normal Speed\n"); |
| 328 | writel(I2CD_NO_TIMEOUT_CTRL, ®s->cactcr2); |
| 329 | } |
| 330 | |
| 331 | writel(get_clk_reg_val(divider), ®s->cactcr1); |
| 332 | ast_i2c_clear_interrupts(dev); |
| 333 | |
| 334 | return 0; |
| 335 | } |
| 336 | |
| 337 | static const struct dm_i2c_ops ast_i2c_ops = { |
| 338 | .xfer = ast_i2c_xfer, |
| 339 | .set_bus_speed = ast_i2c_set_speed, |
| 340 | .deblock = ast_i2c_deblock, |
| 341 | }; |
| 342 | |
| 343 | static const struct udevice_id ast_i2c_ids[] = { |
| 344 | { .compatible = "aspeed,ast2400-i2c-bus" }, |
| 345 | { .compatible = "aspeed,ast2500-i2c-bus" }, |
| 346 | { }, |
| 347 | }; |
| 348 | |
| 349 | U_BOOT_DRIVER(ast_i2c) = { |
| 350 | .name = "ast_i2c", |
| 351 | .id = UCLASS_I2C, |
| 352 | .of_match = ast_i2c_ids, |
| 353 | .probe = ast_i2c_probe, |
| 354 | .ofdata_to_platdata = ast_i2c_ofdata_to_platdata, |
| 355 | .priv_auto_alloc_size = sizeof(struct ast_i2c_priv), |
| 356 | .ops = &ast_i2c_ops, |
| 357 | }; |