blob: 68e1db52c7395317df8137ba4bca829e6efdf5f8 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Peng Fandbf316a2015-07-20 19:28:35 +08002/*
3 * Copyright (C) 2015 Freescale Semiconductor, Inc.
4 *
5 * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
Peng Fandbf316a2015-07-20 19:28:35 +08006 */
7#ifndef __MX6UL_14X14_EVK_CONFIG_H
8#define __MX6UL_14X14_EVK_CONFIG_H
9
Peng Fandbf316a2015-07-20 19:28:35 +080010#include <asm/arch/imx-regs.h>
11#include <linux/sizes.h>
Simon Glassfb64e362020-05-10 11:40:09 -060012#include <linux/stringify.h>
Peng Fandbf316a2015-07-20 19:28:35 +080013#include "mx6_common.h"
Stefano Babic33731bc2017-06-29 10:16:06 +020014#include <asm/mach-imx/gpio.h>
Peng Fandbf316a2015-07-20 19:28:35 +080015
Peng Fan5630c982015-09-06 15:02:34 +080016#define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
17
Peng Fandbf316a2015-07-20 19:28:35 +080018/* SPL options */
Peng Fandbf316a2015-07-20 19:28:35 +080019#include "imx6_spl.h"
20
Peng Fandbf316a2015-07-20 19:28:35 +080021/* Size of malloc() pool */
22#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
23
Peng Fandbf316a2015-07-20 19:28:35 +080024#define CONFIG_MXC_UART_BASE UART1_BASE
25
Peng Fandbf316a2015-07-20 19:28:35 +080026/* MMC Configs */
27#ifdef CONFIG_FSL_USDHC
28#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
29
30/* NAND pin conflicts with usdhc2 */
31#ifdef CONFIG_NAND_MXS
32#define CONFIG_SYS_FSL_USDHC_NUM 1
33#else
34#define CONFIG_SYS_FSL_USDHC_NUM 2
35#endif
36
Peng Fandbf316a2015-07-20 19:28:35 +080037#endif
38
Peng Fandbf316a2015-07-20 19:28:35 +080039/* I2C configs */
Peng Fandbf316a2015-07-20 19:28:35 +080040#ifdef CONFIG_CMD_I2C
Peng Fandbf316a2015-07-20 19:28:35 +080041#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)eb943872015-09-21 22:43:38 +020042#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
43#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
Peng Fandbf316a2015-07-20 19:28:35 +080044#define CONFIG_SYS_I2C_SPEED 100000
Ye Li161bd562018-06-27 20:23:17 -070045#endif
Peng Fandbf316a2015-07-20 19:28:35 +080046
Peng Fandbf316a2015-07-20 19:28:35 +080047#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
48
49#define CONFIG_EXTRA_ENV_SETTINGS \
50 "script=boot.scr\0" \
51 "image=zImage\0" \
52 "console=ttymxc0\0" \
53 "fdt_high=0xffffffff\0" \
54 "initrd_high=0xffffffff\0" \
Peng Fan5630c982015-09-06 15:02:34 +080055 "fdt_file=undefined\0" \
Peng Fandbf316a2015-07-20 19:28:35 +080056 "fdt_addr=0x83000000\0" \
57 "boot_fdt=try\0" \
58 "ip_dyn=yes\0" \
Anatolij Gustschin87a0dd52019-09-23 18:05:05 +020059 "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
Peng Fan60c72b62015-10-29 15:54:48 +080060 "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
Peng Fandbf316a2015-07-20 19:28:35 +080061 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
62 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
63 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
64 "mmcautodetect=yes\0" \
65 "mmcargs=setenv bootargs console=${console},${baudrate} " \
66 "root=${mmcroot}\0" \
67 "loadbootscript=" \
68 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
69 "bootscript=echo Running bootscript from mmc ...; " \
70 "source\0" \
71 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
72 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
73 "mmcboot=echo Booting from mmc ...; " \
74 "run mmcargs; " \
75 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
76 "if run loadfdt; then " \
77 "bootz ${loadaddr} - ${fdt_addr}; " \
78 "else " \
79 "if test ${boot_fdt} = try; then " \
80 "bootz; " \
81 "else " \
82 "echo WARN: Cannot load the DT; " \
83 "fi; " \
84 "fi; " \
85 "else " \
86 "bootz; " \
87 "fi;\0" \
88 "netargs=setenv bootargs console=${console},${baudrate} " \
89 "root=/dev/nfs " \
90 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
91 "netboot=echo Booting from net ...; " \
92 "run netargs; " \
93 "if test ${ip_dyn} = yes; then " \
94 "setenv get_cmd dhcp; " \
95 "else " \
96 "setenv get_cmd tftp; " \
97 "fi; " \
98 "${get_cmd} ${image}; " \
99 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
100 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
101 "bootz ${loadaddr} - ${fdt_addr}; " \
102 "else " \
103 "if test ${boot_fdt} = try; then " \
104 "bootz; " \
105 "else " \
106 "echo WARN: Cannot load the DT; " \
107 "fi; " \
108 "fi; " \
109 "else " \
110 "bootz; " \
Peng Fan5630c982015-09-06 15:02:34 +0800111 "fi;\0" \
112 "findfdt="\
113 "if test $fdt_file = undefined; then " \
114 "if test $board_name = EVK && test $board_rev = 9X9; then " \
115 "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
116 "if test $board_name = EVK && test $board_rev = 14X14; then " \
117 "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
118 "if test $fdt_file = undefined; then " \
119 "echo WARNING: Could not determine dtb to use; fi; " \
120 "fi;\0" \
Peng Fandbf316a2015-07-20 19:28:35 +0800121
122#define CONFIG_BOOTCOMMAND \
Peng Fan5630c982015-09-06 15:02:34 +0800123 "run findfdt;" \
Peng Fandbf316a2015-07-20 19:28:35 +0800124 "mmc dev ${mmcdev};" \
125 "mmc dev ${mmcdev}; if mmc rescan; then " \
126 "if run loadbootscript; then " \
127 "run bootscript; " \
128 "else " \
129 "if run loadimage; then " \
130 "run mmcboot; " \
131 "else run netboot; " \
132 "fi; " \
133 "fi; " \
134 "else run netboot; fi"
135
136/* Miscellaneous configurable options */
Peng Fandbf316a2015-07-20 19:28:35 +0800137
138#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
139#define CONFIG_SYS_HZ 1000
140
Peng Fandbf316a2015-07-20 19:28:35 +0800141/* Physical Memory Map */
Peng Fandbf316a2015-07-20 19:28:35 +0800142#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
143
144#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
145#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
146#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
147
148#define CONFIG_SYS_INIT_SP_OFFSET \
149 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
150#define CONFIG_SYS_INIT_SP_ADDR \
151 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
152
Masahiro Yamada8cea9b52017-02-11 22:43:54 +0900153/* environment organization */
Peng Fandbf316a2015-07-20 19:28:35 +0800154#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
155
Peng Fandbf316a2015-07-20 19:28:35 +0800156/* USB Configs */
Peng Fandbf316a2015-07-20 19:28:35 +0800157#ifdef CONFIG_CMD_USB
Peng Fandbf316a2015-07-20 19:28:35 +0800158#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
159#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
160#define CONFIG_MXC_USB_FLAGS 0
161#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
162#endif
163
Peng Fan32cfb352015-08-12 17:46:52 +0800164#ifdef CONFIG_CMD_NET
Peng Fan32cfb352015-08-12 17:46:52 +0800165#define CONFIG_FEC_ENET_DEV 1
166
167#if (CONFIG_FEC_ENET_DEV == 0)
168#define IMX_FEC_BASE ENET_BASE_ADDR
169#define CONFIG_FEC_MXC_PHYADDR 0x2
170#define CONFIG_FEC_XCV_TYPE RMII
Ye Li161bd562018-06-27 20:23:17 -0700171#define CONFIG_ETHPRIME "eth0"
Peng Fan32cfb352015-08-12 17:46:52 +0800172#elif (CONFIG_FEC_ENET_DEV == 1)
173#define IMX_FEC_BASE ENET2_BASE_ADDR
174#define CONFIG_FEC_MXC_PHYADDR 0x1
175#define CONFIG_FEC_XCV_TYPE RMII
Ye Li161bd562018-06-27 20:23:17 -0700176#define CONFIG_ETHPRIME "eth1"
Peng Fan32cfb352015-08-12 17:46:52 +0800177#endif
Peng Fan32cfb352015-08-12 17:46:52 +0800178#endif
179
Adrian Alonsoce08c362015-09-02 13:54:13 -0500180#define CONFIG_IMX_THERMAL
Peng Fandbf316a2015-07-20 19:28:35 +0800181
Peng Fanc0eaca22016-01-04 12:19:14 +0800182#ifndef CONFIG_SPL_BUILD
Peng Fanf2e78c82019-08-01 06:02:49 +0000183#if defined(CONFIG_DM_VIDEO)
Peng Fan60c72b62015-10-29 15:54:48 +0800184#define CONFIG_VIDEO_MXS
185#define CONFIG_VIDEO_LOGO
Peng Fan60c72b62015-10-29 15:54:48 +0800186#define CONFIG_BMP_16BPP
187#define CONFIG_VIDEO_BMP_RLE8
188#define CONFIG_VIDEO_BMP_LOGO
189#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
190#endif
Peng Fanc0eaca22016-01-04 12:19:14 +0800191#endif
Peng Fan60c72b62015-10-29 15:54:48 +0800192
Peng Fandbf316a2015-07-20 19:28:35 +0800193#endif