blob: 5e2647ddadffe61e3729d29d2ff5c9a9f0940f23 [file] [log] [blame]
Heiko Schocherac1956e2006-04-20 08:42:42 +02001/*
Wolfgang Denkf7290752006-06-10 22:00:40 +02002 * (C) Copyright 2005
Heiko Schocherac1956e2006-04-20 08:42:42 +02003 * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
Wolfgang Denkf7290752006-06-10 22:00:40 +02004 *
Heiko Schocherac1956e2006-04-20 08:42:42 +02005 * Based On
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27#include <common.h>
28#include "cfm_flash.h"
29
30#define PHYS_FLASH_1 CFG_FLASH_BASE
31#define FLASH_BANK_SIZE 0x200000
32
33flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
34
35void flash_print_info (flash_info_t * info)
36{
37 int i;
38
39 switch (info->flash_id & FLASH_VENDMASK) {
40 case (AMD_MANUFACT & FLASH_VENDMASK):
41 printf ("AMD: ");
42 switch (info->flash_id & FLASH_TYPEMASK) {
43 case (AMD_ID_LV160B & FLASH_TYPEMASK):
44 printf ("AM29LV160B (16Bit)\n");
45 break;
46 default:
47 printf ("Unknown Chip Type\n");
48 break;
49 }
50 break;
51 case FREESCALE_MANUFACT & FLASH_VENDMASK:
52 cfm_flash_print_info (info);
53 break;
54 default:
55 printf ("Unknown Vendor ");
56 break;
57 }
58
59 puts (" Size: ");
60 if ((info->size >> 20) > 0)
61 {
62 printf ("%ld MiB",info->size >> 20);
63 }
64 else
65 {
66 printf ("%ld KiB",info->size >> 10);
67 }
68 printf (" in %d Sectors\n", info->sector_count);
69
70 printf (" Sector Start Addresses:");
71 for (i = 0; i < info->sector_count; i++) {
72 if ((i % 4) == 0) {
73 printf ("\n ");
74 }
75 printf ("%02d: %08lX%s ", i,info->start[i],
76 info->protect[i] ? " P" : " ");
77 }
78 printf ("\n\n");
79}
80
81unsigned long flash_init (void)
82{
83 int i, j;
84 ulong size = 0;
85
86 for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
87 ulong flashbase = 0;
88
89 switch (i)
90 {
91 case 1:
92 flash_info[i].flash_id =
93 (AMD_MANUFACT & FLASH_VENDMASK) |
94 (AMD_ID_LV160B & FLASH_TYPEMASK);
95 flash_info[i].size = FLASH_BANK_SIZE;
96 flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
97 memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
98 flashbase = PHYS_FLASH_1;
99 for (j = 0; j < flash_info[i].sector_count; j++) {
100 if (j == 0) {
101 /* 1st is 16 KiB */
102 flash_info[i].start[j] = flashbase;
103 }
104 if ((j >= 1) && (j <= 2)) {
105 /* 2nd and 3rd are 8 KiB */
106 flash_info[i].start[j] =
107 flashbase + 0x4000 + 0x2000 * (j - 1);
108 }
109 if (j == 3) {
110 /* 4th is 32 KiB */
111 flash_info[i].start[j] = flashbase + 0x8000;
112 }
113 if ((j >= 4) && (j <= 34)) {
114 /* rest is 256 KiB */
115 flash_info[i].start[j] =
116 flashbase + 0x10000 + 0x10000 * (j - 4);
117 }
118 }
119 break;
120 case 0:
121 cfm_flash_init (&flash_info[i]);
122 break;
123 default:
124 panic ("configured to many flash banks!\n");
125 }
126
127 size += flash_info[i].size;
128 }
129
130 flash_protect (FLAG_PROTECT_SET,
131 CFG_FLASH_BASE,
132 CFG_FLASH_BASE + 0xffff, &flash_info[0]);
133
134 return size;
135}
136
137#define CMD_READ_ARRAY 0x00F0
138#define CMD_UNLOCK1 0x00AA
139#define CMD_UNLOCK2 0x0055
140#define CMD_ERASE_SETUP 0x0080
141#define CMD_ERASE_CONFIRM 0x0030
142#define CMD_PROGRAM 0x00A0
143#define CMD_UNLOCK_BYPASS 0x0020
144
145#define MEM_FLASH_ADDR1 (*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
146#define MEM_FLASH_ADDR2 (*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
147
148
149#define BIT_ERASE_DONE 0x0080
150#define BIT_RDY_MASK 0x0080
151#define BIT_PROGRAM_ERROR 0x0020
152#define BIT_TIMEOUT 0x80000000 /* our flag */
153
154#define ERR_READY -1
155
156int amd_flash_erase_sector(flash_info_t * info, int sector)
157{
158 int state;
159 ulong result;
160
161 volatile u16 *addr =
162 (volatile u16 *) (info->start[sector]);
163
164 MEM_FLASH_ADDR1 = CMD_UNLOCK1;
165 MEM_FLASH_ADDR2 = CMD_UNLOCK2;
166 MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
167
168 MEM_FLASH_ADDR1 = CMD_UNLOCK1;
169 MEM_FLASH_ADDR2 = CMD_UNLOCK2;
170 *addr = CMD_ERASE_CONFIRM;
171
172 /* wait until flash is ready */
173 state = 0;
174 set_timer (0);
175
176 do {
177 result = *addr;
178
179 /* check timeout */
180 if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
181 MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
182 state = ERR_TIMOUT;
183 }
184
185 if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
186 state = ERR_READY;
187 }
188 while (!state);
189 if (state == ERR_READY)
190 state = ERR_OK;
191
192 MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
193
194 return state;
195}
196
197int flash_erase (flash_info_t * info, int s_first, int s_last)
198{
199 int iflag, cflag;
200 int sector;
201 int rc;
202
203 rc = ERR_OK;
204
205 if (info->flash_id == FLASH_UNKNOWN)
206 {
207 rc = ERR_UNKNOWN_FLASH_TYPE;
208 } /* (info->flash_id == FLASH_UNKNOWN) */
209
210 if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
211 {
212 rc = ERR_INVAL;
213 }
214
215 cflag = icache_status ();
216 icache_disable ();
217 iflag = disable_interrupts ();
218
219 for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
220
221 if (info->protect[sector])
222 {
223 putc('P'); /* protected sector will not erase */
224 }
225 else
226 {
227 /* erase on unprotected sector */
228 puts("E\b");
229 switch (info->flash_id & FLASH_VENDMASK)
230 {
231 case (AMD_MANUFACT & FLASH_VENDMASK):
232 rc = amd_flash_erase_sector(info,sector);
233 break;
234 case (FREESCALE_MANUFACT & FLASH_VENDMASK):
235 rc = cfm_flash_erase_sector(info,sector);
236 break;
237 default:
238 return ERR_UNKNOWN_FLASH_VENDOR;
239 }
240 putc('.');
241 }
242 }
243 if (rc!=ERR_OK)
244 {
245 printf ("\n ");
246 flash_perror (rc);
247 }
248 else
249 {
250 printf (" done\n");
251 }
252
253 udelay (10000); /* allow flash to settle - wait 10 ms */
254
255 if (iflag)
256 enable_interrupts ();
257
258 if (cflag)
Wolfgang Denk87b3d4b2006-11-30 18:02:20 +0100259 icache_enable ();
Heiko Schocherac1956e2006-04-20 08:42:42 +0200260
261 return rc;
262}
263
264volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
265{
266 volatile u16 *addr;
267 ulong result;
268 int cflag, iflag;
269 int state;
270
271 /*
272 * Check if Flash is (sufficiently) erased
273 */
274 addr = (volatile u16 *) dest;
275
276 result = *addr;
277 if ((result & data) != data)
278 return ERR_NOT_ERASED;
279
280 /*
281 * Disable interrupts which might cause a timeout
282 * here. Remember that our exception vectors are
283 * at address 0 in the flash, and we don't want a
284 * (ticker) exception to happen while the flash
285 * chip is in programming mode.
286 */
287
288 cflag = icache_status ();
289 icache_disable ();
290 iflag = disable_interrupts ();
291
292 MEM_FLASH_ADDR1 = CMD_UNLOCK1;
293 MEM_FLASH_ADDR2 = CMD_UNLOCK2;
294 MEM_FLASH_ADDR1 = CMD_PROGRAM;
295 *addr = data;
296
297 /* arm simple, non interrupt dependent timer */
298 set_timer (0);
299
300 /* wait until flash is ready */
301 state = 0;
302 do {
303 result = *addr;
304
305 /* check timeout */
306 if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
307 state = ERR_TIMOUT;
308 }
309 if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
310 state = ERR_READY;
311
312 } while (!state);
313
314 *addr = CMD_READ_ARRAY;
315
316 if (state == ERR_READY)
317 state = ERR_OK;
318 if ((*addr != data) && (state != ERR_TIMOUT))
319 state = ERR_PROG_ERROR;
320
321 if (iflag)
322 enable_interrupts ();
323
324 if (cflag)
325 icache_enable ();
326
327 return state;
328}
329
330int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
331{
332 int rc;
333 ulong dest;
334 u16 data;
335
336 rc = ERR_OK;
337 if (addr & 1)
338 {
339 debug ("Byte alignment not supported\n");
340 rc = ERR_ALIGN;
341 }
342 if (cnt & 1)
343 {
344 debug ("Byte transfer not supported\n");
345 rc = ERR_ALIGN;
346 }
347
348 dest = addr;
349 while ((cnt>=2) && (rc == ERR_OK))
350 {
351 data =*((volatile u16 *) src);
352 rc=amd_write_word (info,dest,data);
353 src +=2;
354 dest +=2;
355 cnt -=2;
356 }
357 return rc;
358}
359
360int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
361{
362 int rc;
363
364 switch (info->flash_id & FLASH_VENDMASK)
365 {
366 case (AMD_MANUFACT & FLASH_VENDMASK):
367 rc = amd_flash_write_buff(info,src,addr,cnt);
368 break;
369 case (FREESCALE_MANUFACT & FLASH_VENDMASK):
370 rc = cfm_flash_write_buff(info,src,addr,cnt);
371 break;
372 default:
373 rc = ERR_UNKNOWN_FLASH_VENDOR;
374 }
375 return rc;
376
377}
378int amd_flash_protect(flash_info_t * info,long sector,int prot)
379{
380 int rc;
381 rc= ERR_OK;
382 if (prot)
383 {
384 info->protect[sector]=1;
385 }
386 else
387 {
388 info->protect[sector]=0;
389 }
390 return rc;
391}
392
393#ifdef CFG_FLASH_PROTECTION
394
395int flash_real_protect(flash_info_t * info,long sector,int prot)
396{
397 int rc;
398
399 switch (info->flash_id & FLASH_VENDMASK)
400 {
401 case (AMD_MANUFACT & FLASH_VENDMASK):
402 rc = amd_flash_protect(info,sector,prot);
403 break;
404 case (FREESCALE_MANUFACT & FLASH_VENDMASK):
405 rc = cfm_flash_protect(info,sector,prot);
406 break;
407 default:
408 rc = ERR_UNKNOWN_FLASH_VENDOR;
409 }
410 return rc;
411}
412
413#endif