dts/upstream/src/powerpc/fsl/t1040rdb.dts

/*
 * T1040RDB Device Tree Source
 *
 * Copyright 2014 - 2015 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *	 notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *	 notice, this list of conditions and the following disclaimer in the
 *	 documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *	 names of its contributors may be used to endorse or promote products
 *	 derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/include/ "t104xsi-pre.dtsi"
/include/ "t104xrdb.dtsi"

/ {
	model = "fsl,T1040RDB";
	compatible = "fsl,T1040RDB";

	aliases {
		phy_sgmii_2 = &phy_sgmii_2;
	};

	soc@ffe000000 {
		fman@400000 {
			ethernet@e0000 {
				fixed-link = <0 1 1000 0 0>;
				phy-connection-type = "sgmii";
			};

			ethernet@e2000 {
				fixed-link = <1 1 1000 0 0>;
				phy-connection-type = "sgmii";
			};

			ethernet@e4000 {
				phy-handle = <&phy_sgmii_2>;
				phy-connection-type = "sgmii";
			};

			mdio@fc000 {
				phy_sgmii_2: ethernet-phy@3 {
					reg = <0x03>;
				};

				/* VSC8514 QSGMII PHY */
				phy_qsgmii_0: ethernet-phy@4 {
					reg = <0x4>;
				};

				phy_qsgmii_1: ethernet-phy@5 {
					reg = <0x5>;
				};

				phy_qsgmii_2: ethernet-phy@6 {
					reg = <0x6>;
				};

				phy_qsgmii_3: ethernet-phy@7 {
					reg = <0x7>;
				};

				/* VSC8514 QSGMII PHY */
				phy_qsgmii_4: ethernet-phy@8 {
					reg = <0x8>;
				};

				phy_qsgmii_5: ethernet-phy@9 {
					reg = <0x9>;
				};

				phy_qsgmii_6: ethernet-phy@a {
					reg = <0xa>;
				};

				phy_qsgmii_7: ethernet-phy@b {
					reg = <0xb>;
				};
			};
		};
	};

	ifc: localbus@ffe124000 {
		cpld@3,0 {
			compatible = "fsl,t1040rdb-cpld";
		};
	};
};

#include "t1040si-post.dtsi"

&seville_switch {
	status = "okay";
};

&seville_port0 {
	managed = "in-band-status";
	phy-handle = <&phy_qsgmii_0>;
	phy-mode = "qsgmii";
	label = "ETH3";
	status = "okay";
};

&seville_port1 {
	managed = "in-band-status";
	phy-handle = <&phy_qsgmii_1>;
	phy-mode = "qsgmii";
	label = "ETH4";
	status = "okay";
};

&seville_port2 {
	managed = "in-band-status";
	phy-handle = <&phy_qsgmii_2>;
	phy-mode = "qsgmii";
	label = "ETH5";
	status = "okay";
};

&seville_port3 {
	managed = "in-band-status";
	phy-handle = <&phy_qsgmii_3>;
	phy-mode = "qsgmii";
	label = "ETH6";
	status = "okay";
};

&seville_port4 {
	managed = "in-band-status";
	phy-handle = <&phy_qsgmii_4>;
	phy-mode = "qsgmii";
	label = "ETH7";
	status = "okay";
};

&seville_port5 {
	managed = "in-band-status";
	phy-handle = <&phy_qsgmii_5>;
	phy-mode = "qsgmii";
	label = "ETH8";
	status = "okay";
};

&seville_port6 {
	managed = "in-band-status";
	phy-handle = <&phy_qsgmii_6>;
	phy-mode = "qsgmii";
	label = "ETH9";
	status = "okay";
};

&seville_port7 {
	managed = "in-band-status";
	phy-handle = <&phy_qsgmii_7>;
	phy-mode = "qsgmii";
	label = "ETH10";
	status = "okay";
};

&seville_port8 {
	status = "okay";
};

&seville_port9 {
	status = "okay";
};