| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | ES7241 i2s AD converter |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible : "everest,es7241" |
| 5 | - VDDP-supply: regulator phandle for the VDDA supply |
| 6 | - VDDA-supply: regulator phandle for the VDDP supply |
| 7 | - VDDD-supply: regulator phandle for the VDDD supply |
| 8 | |
| 9 | Optional properties: |
| 10 | - reset-gpios: gpio connected to the reset pin |
| 11 | - m0-gpios : gpio connected to the m0 pin |
| 12 | - m1-gpios : gpio connected to the m1 pin |
| 13 | - everest,sdout-pull-down: |
| 14 | Format used by the serial interface is controlled by pulling |
| 15 | the sdout. If the sdout is pulled down, leftj format is used. |
| 16 | If this property is not provided, sdout is assumed to pulled |
| 17 | up and i2s format is used |
| 18 | |
| 19 | Example: |
| 20 | |
| 21 | linein: audio-codec@2 { |
| 22 | #sound-dai-cells = <0>; |
| 23 | compatible = "everest,es7241"; |
| 24 | VDDA-supply = <&vcc_3v3>; |
| 25 | VDDP-supply = <&vcc_3v3>; |
| 26 | VDDD-supply = <&vcc_3v3>; |
| 27 | reset-gpios = <&gpio GPIOH_42>; |
| 28 | }; |