blob: 00255c80d6d3d0f64b7041bfb6ed6c77ff6cf3b1 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +01002/*
3 * Copyright 2013-2015 Toradex, Inc.
4 *
5 * Configuration settings for the Toradex Apalis iMX6
Max Krummenacher3b74ccf2016-11-30 19:43:08 +01006 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
11#include "mx6_common.h"
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010012
13#undef CONFIG_DISPLAY_BOARDINFO
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010014
15#define CONFIG_MACH_TYPE 4886
16
17#define CONFIG_SYS_GENERIC_BOARD
18
19#include <asm/arch/imx-regs.h>
Stefano Babic33731bc2017-06-29 10:16:06 +020020#include <asm/mach-imx/gpio.h>
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010021
22#ifdef CONFIG_SPL
23#include "imx6_spl.h"
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010024#endif
25
26#define CONFIG_CMDLINE_TAG
27#define CONFIG_SETUP_MEMORY_TAGS
28#define CONFIG_INITRD_TAG
29#define CONFIG_REVISION_TAG
30#define CONFIG_SERIAL_TAG
31
32/* Size of malloc() pool */
33#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
34
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010035#define CONFIG_MISC_INIT_R
36
37#define CONFIG_MXC_UART
38#define CONFIG_MXC_UART_BASE UART1_BASE
39
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010040/* I2C Configs */
41#define CONFIG_SYS_I2C
42#define CONFIG_SYS_I2C_MXC
43#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
44#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
45#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
46#define CONFIG_SYS_I2C_SPEED 100000
47
48/* OCOTP Configs */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010049#ifdef CONFIG_CMD_FUSE
50#define CONFIG_MXC_OCOTP
51#endif
52
53/* MMC Configs */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010054#define CONFIG_FSL_USDHC
55#define CONFIG_SYS_FSL_ESDHC_ADDR 0
56#define CONFIG_SYS_FSL_USDHC_NUM 3
57
58#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010059#define CONFIG_BOUNCE_BUFFER
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010060
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010061/*
62 * SATA Configs
63 */
64#ifdef CONFIG_CMD_SATA
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010065#define CONFIG_SYS_SATA_MAX_DEVICE 1
66#define CONFIG_DWC_AHSATA_PORT_ID 0
67#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
68#define CONFIG_LBA48
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010069#endif
70
71/* Network */
72#define CONFIG_FEC_MXC
73#define CONFIG_MII
74#define IMX_FEC_BASE ENET_BASE_ADDR
75#define CONFIG_FEC_XCV_TYPE RGMII
76#define CONFIG_ETHPRIME "FEC"
77#define CONFIG_FEC_MXC_PHYADDR 6
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010078#define CONFIG_IP_DEFRAG
79#define CONFIG_TFTP_BLOCKSIZE 4096
80#define CONFIG_TFTP_TSIZE
81
82/* USB Configs */
83/* Host */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010084#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
85#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
86#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
87#define CONFIG_MXC_USB_FLAGS 0
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010088/* Client */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010089#define CONFIG_USBD_HS
90
91#define CONFIG_USB_GADGET_MASS_STORAGE
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010092/* USB DFU */
93#define CONFIG_DFU_MMC
94
95/* Miscellaneous commands */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +010096
97/* Framebuffer and LCD */
98#define CONFIG_VIDEO_IPUV3
99#define CONFIG_SYS_CONSOLE_IS_IN_ENV
100#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
101#define CONFIG_VIDEO_BMP_RLE8
102#define CONFIG_SPLASH_SCREEN
103#define CONFIG_SPLASH_SCREEN_ALIGN
104#define CONFIG_BMP_16BPP
105#define CONFIG_VIDEO_LOGO
106#define CONFIG_VIDEO_BMP_LOGO
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100107#define CONFIG_CONSOLE_MUX
108#define CONFIG_IMX_HDMI
109#define CONFIG_IMX_VIDEO_SKIP
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100110
111/* allow to overwrite serial and ethaddr */
112#define CONFIG_ENV_OVERWRITE
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100113
114/* Command definition */
115#undef CONFIG_CMD_LOADB
116#undef CONFIG_CMD_LOADS
117#undef CONFIG_CMD_NFS
118#undef CONFIG_CMD_FLASH
119
120#undef CONFIG_IPADDR
121#define CONFIG_IPADDR 192.168.10.2
122#define CONFIG_NETMASK 255.255.255.0
123#undef CONFIG_SERVERIP
124#define CONFIG_SERVERIP 192.168.10.1
125
126#define CONFIG_LOADADDR 0x12000000
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100127
128#ifdef CONFIG_CMD_SATA
129#define CONFIG_DRIVE_SATA "sata "
130#else
131#define CONFIG_DRIVE_SATA
132#endif
133
134#ifdef CONFIG_CMD_MMC
135#define CONFIG_DRIVE_MMC "mmc "
136#else
137#define CONFIG_DRIVE_MMC
138#endif
139
140#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
141
142#define DFU_ALT_EMMC_INFO \
143 "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
144 "boot part 0 1;" \
145 "rootfs part 0 2;" \
146 "uImage fat 0 1;" \
147 "imx6q-colibri-eval-v3.dtb fat 0 1;" \
148 "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
149
150#define EMMC_BOOTCMD \
151 "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
152 "rootwait\0" \
153 "emmcboot=run setup; " \
154 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
155 "${vidargs}; echo Booting from internal eMMC chip...; " \
156 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
157 "${boot_file} && run fdt_fixup && " \
158 "bootm ${kernel_addr_r} ${dtbparam}\0" \
159 "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
160 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
161
162#define MEM_LAYOUT_ENV_SETTINGS \
Stefan Agner35eebee2017-03-09 17:17:51 -0800163 "bootm_size=0x20000000\0" \
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100164 "fdt_addr_r=0x12000000\0" \
165 "fdt_high=0xffffffff\0" \
166 "initrd_high=0xffffffff\0" \
167 "kernel_addr_r=0x11000000\0" \
168 "ramdisk_addr_r=0x12100000\0"
169
170#define NFS_BOOTCMD \
171 "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
172 "nfsboot=run setup; " \
173 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
174 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
175 "run nfsdtbload; dhcp ${kernel_addr_r} " \
176 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
177 "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
178 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
179
180#define SD_BOOTCMD \
181 "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
182 "rootwait\0" \
183 "sdboot=run setup; " \
184 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
185 "${vidargs}; echo Booting from SD card; " \
186 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
187 "${boot_file} && run fdt_fixup && " \
188 "bootm ${kernel_addr_r} ${dtbparam}\0" \
189 "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
190 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
191
192#define USB_BOOTCMD \
193 "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
194 "rootwait\0" \
195 "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
196 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
197 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
198 "${boot_file} && run fdt_fixup && " \
199 "bootm ${kernel_addr_r} ${dtbparam}\0" \
200 "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
201 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
202
203#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
204#define FDT_FILE "imx6q-apalis-eval.dtb"
205#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
206#else
207#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
208#endif
209#define CONFIG_EXTRA_ENV_SETTINGS \
210 "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
211 "run nfsboot ; echo ; echo nfsboot failed ; " \
212 "usb start ;" \
213 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
214 "boot_file=uImage\0" \
215 "console=ttymxc0\0" \
216 "defargs=enable_wait_mode=off vmalloc=400M\0" \
217 "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
218 EMMC_BOOTCMD \
219 "fdt_file=" FDT_FILE "\0" \
220 "fdt_fixup=;\0" \
221 MEM_LAYOUT_ENV_SETTINGS \
222 NFS_BOOTCMD \
223 SD_BOOTCMD \
224 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
225 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
226 "flash_eth.img && source ${loadaddr}\0" \
227 "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
228 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
229 "source ${loadaddr}\0" \
230 "setup=setenv setupargs fec_mac=${ethaddr} " \
231 "consoleblank=0 no_console_suspend=1 console=tty1 " \
232 "console=${console},${baudrate}n8\0 " \
233 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
234 "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
235 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
236 "source ${loadaddr}\0" \
237 "splashpos=m,m\0" \
238 "vidargs=mxc_hdmi.only_cea=1 " \
239 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
240 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
241 "fbmem=32M\0 "
242
243/* Miscellaneous configurable options */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100244#undef CONFIG_SYS_CBSIZE
245#define CONFIG_SYS_CBSIZE 1024
246#undef CONFIG_SYS_MAXARGS
247#define CONFIG_SYS_MAXARGS 48
248
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100249#define CONFIG_SYS_MEMTEST_START 0x10000000
250#define CONFIG_SYS_MEMTEST_END 0x10010000
251#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
252
253#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
254
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100255/* Physical Memory Map */
256#define CONFIG_NR_DRAM_BANKS 1
257#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
258
259#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
260#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
261#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
262
263#define CONFIG_SYS_INIT_SP_OFFSET \
264 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
265#define CONFIG_SYS_INIT_SP_ADDR \
266 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
267
Masahiro Yamada8cea9b52017-02-11 22:43:54 +0900268/* environment organization */
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100269
270#define CONFIG_ENV_SIZE (8 * 1024)
271
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100272#if defined(CONFIG_ENV_IS_IN_MMC)
273/* Environment in eMMC, before config block at the end of 1st "boot sector" */
274#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
275 CONFIG_TDX_CFG_BLOCK_OFFSET)
276#define CONFIG_SYS_MMC_ENV_DEV 0
277#define CONFIG_SYS_MMC_ENV_PART 1
278#endif
279
280#define CONFIG_OF_SYSTEM_SETUP
281
282#define CONFIG_CMD_TIME
283
Max Krummenacher3b74ccf2016-11-30 19:43:08 +0100284#endif /* __CONFIG_H */