Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
Ley Foon Tan | cfd0c54 | 2017-04-26 02:44:43 +0800 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2016-2017 Intel Corporation |
Ley Foon Tan | cfd0c54 | 2017-04-26 02:44:43 +0800 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | #include <altera.h> |
| 7 | #include <common.h> |
| 8 | #include <errno.h> |
| 9 | #include <fdtdec.h> |
| 10 | #include <miiphy.h> |
| 11 | #include <netdev.h> |
| 12 | #include <ns16550.h> |
| 13 | #include <watchdog.h> |
| 14 | #include <asm/arch/misc.h> |
| 15 | #include <asm/arch/pinmux.h> |
| 16 | #include <asm/arch/reset_manager.h> |
| 17 | #include <asm/arch/sdram_arria10.h> |
| 18 | #include <asm/arch/system_manager.h> |
| 19 | #include <asm/arch/nic301.h> |
| 20 | #include <asm/io.h> |
| 21 | #include <asm/pl310.h> |
| 22 | |
| 23 | #define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 0x08 |
| 24 | #define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 0x58 |
| 25 | #define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3 0x68 |
| 26 | #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 0x18 |
| 27 | #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 0x78 |
| 28 | #define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3 0x98 |
| 29 | |
Ley Foon Tan | cfd0c54 | 2017-04-26 02:44:43 +0800 | [diff] [blame] | 30 | #if defined(CONFIG_SPL_BUILD) |
| 31 | static struct pl310_regs *const pl310 = |
| 32 | (struct pl310_regs *)CONFIG_SYS_PL310_BASE; |
| 33 | static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base = |
| 34 | (void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS; |
| 35 | #endif |
| 36 | |
| 37 | static struct socfpga_system_manager *sysmgr_regs = |
| 38 | (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; |
| 39 | |
| 40 | /* |
| 41 | * DesignWare Ethernet initialization |
| 42 | */ |
| 43 | #ifdef CONFIG_ETH_DESIGNWARE |
Marek Vasut | 3386c85 | 2018-04-23 22:49:31 +0200 | [diff] [blame] | 44 | static void arria10_dwmac_reset(const u8 of_reset_id, const u8 phymode) |
Ley Foon Tan | cfd0c54 | 2017-04-26 02:44:43 +0800 | [diff] [blame] | 45 | { |
| 46 | u32 reset; |
| 47 | |
| 48 | if (of_reset_id == EMAC0_RESET) { |
| 49 | reset = SOCFPGA_RESET(EMAC0); |
| 50 | } else if (of_reset_id == EMAC1_RESET) { |
| 51 | reset = SOCFPGA_RESET(EMAC1); |
| 52 | } else if (of_reset_id == EMAC2_RESET) { |
| 53 | reset = SOCFPGA_RESET(EMAC2); |
| 54 | } else { |
| 55 | printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id); |
| 56 | return; |
| 57 | } |
| 58 | |
| 59 | clrsetbits_le32(&sysmgr_regs->emac[of_reset_id - EMAC0_RESET], |
| 60 | SYSMGR_EMACGRP_CTRL_PHYSEL_MASK, |
| 61 | phymode); |
| 62 | |
| 63 | /* Release the EMAC controller from reset */ |
| 64 | socfpga_per_reset(reset, 0); |
| 65 | } |
Marek Vasut | 3386c85 | 2018-04-23 22:49:31 +0200 | [diff] [blame] | 66 | |
| 67 | static int socfpga_eth_reset(void) |
| 68 | { |
| 69 | /* Put all GMACs into RESET state. */ |
| 70 | socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1); |
| 71 | socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1); |
| 72 | socfpga_per_reset(SOCFPGA_RESET(EMAC2), 1); |
| 73 | return socfpga_eth_reset_common(arria10_dwmac_reset); |
| 74 | }; |
| 75 | #else |
| 76 | static int socfpga_eth_reset(void) |
| 77 | { |
| 78 | return 0; |
| 79 | }; |
Ley Foon Tan | cfd0c54 | 2017-04-26 02:44:43 +0800 | [diff] [blame] | 80 | #endif |
| 81 | |
| 82 | #if defined(CONFIG_SPL_BUILD) |
| 83 | /* |
| 84 | + * This function initializes security policies to be consistent across |
| 85 | + * all logic units in the Arria 10. |
| 86 | + * |
| 87 | + * The idea is to set all security policies to be normal, nonsecure |
| 88 | + * for all units. |
| 89 | + */ |
| 90 | static void initialize_security_policies(void) |
| 91 | { |
| 92 | /* Put OCRAM in non-secure */ |
| 93 | writel(0x003f0000, &noc_fw_ocram_base->region0); |
| 94 | writel(0x1, &noc_fw_ocram_base->enable); |
| 95 | } |
| 96 | |
| 97 | int arch_early_init_r(void) |
| 98 | { |
| 99 | initialize_security_policies(); |
| 100 | |
| 101 | /* Configure the L2 controller to make SDRAM start at 0 */ |
| 102 | writel(0x1, &pl310->pl310_addr_filter_start); |
| 103 | |
| 104 | /* assert reset to all except L4WD0 and L4TIMER0 */ |
| 105 | socfpga_per_reset_all(); |
| 106 | |
Ley Foon Tan | cfd0c54 | 2017-04-26 02:44:43 +0800 | [diff] [blame] | 107 | return 0; |
| 108 | } |
| 109 | #else |
| 110 | int arch_early_init_r(void) |
| 111 | { |
| 112 | return 0; |
| 113 | } |
| 114 | #endif |
| 115 | |
| 116 | /* |
| 117 | * This function looking the 1st encounter UART peripheral, |
| 118 | * and then return its offset of the dedicated/shared IO pin |
| 119 | * mux. offset value (zero and above). |
| 120 | */ |
| 121 | static int find_peripheral_uart(const void *blob, |
| 122 | int child, const char *node_name) |
| 123 | { |
| 124 | int len; |
| 125 | fdt_addr_t base_addr = 0; |
| 126 | fdt_size_t size; |
| 127 | const u32 *cell; |
| 128 | u32 value, offset = 0; |
| 129 | |
| 130 | base_addr = fdtdec_get_addr_size(blob, child, "reg", &size); |
| 131 | if (base_addr != FDT_ADDR_T_NONE) { |
| 132 | cell = fdt_getprop(blob, child, "pinctrl-single,pins", |
| 133 | &len); |
| 134 | if (cell != NULL) { |
| 135 | for (; len > 0; len -= (2 * sizeof(u32))) { |
| 136 | offset = fdt32_to_cpu(*cell++); |
| 137 | value = fdt32_to_cpu(*cell++); |
| 138 | /* Found UART peripheral. */ |
| 139 | if (value == PINMUX_UART) |
| 140 | return offset; |
| 141 | } |
| 142 | } |
| 143 | } |
| 144 | return -EINVAL; |
| 145 | } |
| 146 | |
| 147 | /* |
| 148 | * This function looks up the 1st encounter UART peripheral, |
| 149 | * and then return its offset of the dedicated/shared IO pin |
| 150 | * mux. UART peripheral is found if the offset is not in negative |
| 151 | * value. |
| 152 | */ |
| 153 | static int is_peripheral_uart_true(const void *blob, |
| 154 | int node, const char *child_name) |
| 155 | { |
| 156 | int child, len; |
| 157 | const char *node_name; |
| 158 | |
| 159 | child = fdt_first_subnode(blob, node); |
| 160 | |
| 161 | if (child < 0) |
| 162 | return -EINVAL; |
| 163 | |
| 164 | node_name = fdt_get_name(blob, child, &len); |
| 165 | |
| 166 | while (node_name) { |
| 167 | if (!strcmp(child_name, node_name)) |
| 168 | return find_peripheral_uart(blob, child, node_name); |
| 169 | |
| 170 | child = fdt_next_subnode(blob, child); |
| 171 | if (child < 0) |
| 172 | break; |
| 173 | |
| 174 | node_name = fdt_get_name(blob, child, &len); |
| 175 | } |
| 176 | |
| 177 | return -1; |
| 178 | } |
| 179 | |
| 180 | /* |
| 181 | * This function looking the 1st encounter UART dedicated IO peripheral, |
| 182 | * and then return based address of the 1st encounter UART dedicated |
| 183 | * IO peripheral. |
| 184 | */ |
| 185 | unsigned int dedicated_uart_com_port(const void *blob) |
| 186 | { |
| 187 | int node; |
| 188 | |
| 189 | node = fdtdec_next_compatible(blob, 0, |
| 190 | COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE); |
| 191 | if (node < 0) |
| 192 | return 0; |
| 193 | |
| 194 | if (is_peripheral_uart_true(blob, node, "dedicated") >= 0) |
| 195 | return SOCFPGA_UART1_ADDRESS; |
| 196 | |
| 197 | return 0; |
| 198 | } |
| 199 | |
| 200 | /* |
| 201 | * This function looking the 1st encounter UART shared IO peripheral, and then |
| 202 | * return based address of the 1st encounter UART shared IO peripheral. |
| 203 | */ |
| 204 | unsigned int shared_uart_com_port(const void *blob) |
| 205 | { |
| 206 | int node, ret; |
| 207 | |
| 208 | node = fdtdec_next_compatible(blob, 0, |
| 209 | COMPAT_ALTERA_SOCFPGA_PINCTRL_SINGLE); |
| 210 | if (node < 0) |
| 211 | return 0; |
| 212 | |
| 213 | ret = is_peripheral_uart_true(blob, node, "shared"); |
| 214 | |
| 215 | if (ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 || |
| 216 | ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 || |
| 217 | ret == PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3) |
| 218 | return SOCFPGA_UART0_ADDRESS; |
| 219 | else if (ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 || |
| 220 | ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 || |
| 221 | ret == PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3) |
| 222 | return SOCFPGA_UART1_ADDRESS; |
| 223 | |
| 224 | return 0; |
| 225 | } |
| 226 | |
| 227 | /* |
| 228 | * This function looking the 1st encounter UART peripheral, and then return |
| 229 | * base address of the 1st encounter UART peripheral. |
| 230 | */ |
| 231 | unsigned int uart_com_port(const void *blob) |
| 232 | { |
| 233 | unsigned int ret; |
| 234 | |
| 235 | ret = dedicated_uart_com_port(blob); |
| 236 | |
| 237 | if (ret) |
| 238 | return ret; |
| 239 | |
| 240 | return shared_uart_com_port(blob); |
| 241 | } |
| 242 | |
| 243 | /* |
| 244 | * Print CPU information |
| 245 | */ |
| 246 | #if defined(CONFIG_DISPLAY_CPUINFO) |
| 247 | int print_cpuinfo(void) |
| 248 | { |
| 249 | const u32 bsel = |
| 250 | SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo)); |
| 251 | |
| 252 | puts("CPU: Altera SoCFPGA Arria 10\n"); |
| 253 | |
| 254 | printf("BOOT: %s\n", bsel_str[bsel].name); |
| 255 | return 0; |
| 256 | } |
| 257 | #endif |
| 258 | |
| 259 | #ifdef CONFIG_ARCH_MISC_INIT |
| 260 | int arch_misc_init(void) |
| 261 | { |
Marek Vasut | 3386c85 | 2018-04-23 22:49:31 +0200 | [diff] [blame] | 262 | return socfpga_eth_reset(); |
Ley Foon Tan | cfd0c54 | 2017-04-26 02:44:43 +0800 | [diff] [blame] | 263 | } |
| 264 | #endif |