dts/upstream/src/arm64/marvell/armada-8040-db.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (C) 2016 Marvell Technology Group Ltd.
 *
 * Device Tree file for Marvell Armada 8040 Development board platform
 */

#include <dt-bindings/gpio/gpio.h>
#include "armada-8040.dtsi"

/ {
	model = "Marvell Armada 8040 DB board";
	compatible = "marvell,armada8040-db", "marvell,armada8040",
		     "marvell,armada-ap806-quad", "marvell,armada-ap806";

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x0 0x0 0x80000000>;
	};

	aliases {
		ethernet0 = &cp0_eth0;
		ethernet1 = &cp0_eth2;
		ethernet2 = &cp1_eth0;
		ethernet3 = &cp1_eth1;
		i2c1 = &cp0_i2c0;
		i2c2 = &cp1_i2c0;
	};

	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
		compatible = "regulator-fixed";
		regulator-name = "cp0-usb3h0-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
	};

	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
		compatible = "regulator-fixed";
		regulator-name = "cp0-usb3h1-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
	};

	cp0_usb3_0_phy: cp0-usb3-0-phy {
		compatible = "usb-nop-xceiv";
		vcc-supply = <&cp0_reg_usb3_0_vbus>;
	};

	cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
		compatible = "regulator-fixed";
		regulator-name = "cp1-usb3h0-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
	};

	cp1_usb3_0_phy: cp1-usb3-0-phy {
		compatible = "usb-nop-xceiv";
		vcc-supply = <&cp1_reg_usb3_0_vbus>;
	};
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "U-Boot";
				reg = <0 0x200000>;
			};
			partition@400000 {
				label = "Filesystem";
				reg = <0x200000 0xce0000>;
			};
		};
	};
};

/* Accessible over the mini-USB CON9 connector on the main board */
&uart0 {
	status = "okay";
	pinctrl-0 = <&uart0_pins>;
	pinctrl-names = "default";
};

/* CON6 on CP0 expansion */
&cp0_pcie0 {
	phys = <&cp0_comphy0 0>;
	phy-names = "cp0-pcie0-x1-phy";
	status = "okay";
};

/* CON5 on CP0 expansion */
&cp0_pcie2 {
	phys = <&cp0_comphy5 2>;
	phy-names = "cp0-pcie2-x1-phy";
	status = "okay";
};

&cp0_i2c0 {
	status = "okay";
	clock-frequency = <100000>;

	/* U31 */
	expander0: pca9555@21 {
		compatible = "nxp,pca9555";
		pinctrl-names = "default";
		gpio-controller;
		#gpio-cells = <2>;
		reg = <0x21>;
	};

	/* U25 */
	expander1: pca9555@25 {
		compatible = "nxp,pca9555";
		pinctrl-names = "default";
		gpio-controller;
		#gpio-cells = <2>;
		reg = <0x25>;
	};

};

/* CON4 on CP0 expansion */
&cp0_sata0 {
	status = "okay";

	sata-port@0 {
		phys = <&cp0_comphy1 0>;
		phy-names = "cp0-sata0-0-phy";
	};
	sata-port@1 {
		phys = <&cp0_comphy3 1>;
		phy-names = "cp0-sata0-1-phy";
	};
};

/* CON9 on CP0 expansion */
&cp0_utmi {
	status = "okay";
};

&cp0_usb3_0 {
	usb-phy = <&cp0_usb3_0_phy>;
	phys = <&cp0_utmi0>;
	phy-names = "utmi";
	dr_mode = "host";
	status = "okay";
};

&cp0_comphy4 {
	cp0_usbh1_con: connector {
		compatible = "usb-a-connector";
		phy-supply = <&cp0_reg_usb3_1_vbus>;
	};
};

/* CON10 on CP0 expansion */
&cp0_usb3_1 {
	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
	phy-names = "usb", "utmi";
	dr_mode = "host";
	status = "okay";
};

&cp0_mdio {
	status = "okay";

	phy1: ethernet-phy@1 {
		reg = <1>;
	};
};

&cp0_ethernet {
	status = "okay";
};

&cp0_eth0 {
	status = "okay";
	phy-mode = "10gbase-r";

	fixed-link {
		speed = <10000>;
		full-duplex;
	};
};

&cp0_eth2 {
	status = "okay";
	phy = <&phy1>;
	phy-mode = "rgmii-id";
};

/* CON6 on CP1 expansion */
&cp1_pcie0 {
	phys = <&cp1_comphy0 0>;
	phy-names = "cp1-pcie0-x1-phy";
	status = "okay";
};

/* CON7 on CP1 expansion */
&cp1_pcie1 {
	phys = <&cp1_comphy4 1>;
	phy-names = "cp1-pcie1-x1-phy";
	status = "okay";
};

/* CON5 on CP1 expansion */
&cp1_pcie2 {
	phys = <&cp1_comphy5 2>;
	phy-names = "cp1-pcie2-x1-phy";
	status = "okay";
};

&cp1_i2c0 {
	status = "okay";
	clock-frequency = <100000>;
};

&cp1_spi1 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0x0>;
		spi-max-frequency = <20000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "Boot";
				reg = <0x0 0x200000>;
			};
			partition@200000 {
				label = "Filesystem";
				reg = <0x200000 0xd00000>;
			};
			partition@f00000 {
				label = "Boot_2nd";
				reg = <0xf00000 0x100000>;
			};
		};
	};
};

/*
 * Proper NAND usage will require DPR-76 to be in position 1-2, which disables
 * MDIO signal of CP1.
 */
&cp1_nand_controller {
	pinctrl-0 = <&nand_pins>, <&nand_rb>;
	pinctrl-names = "default";

	nand@0 {
		reg = <0>;
		nand-rb = <0>;
		nand-on-flash-bbt;
		nand-ecc-strength = <4>;
		nand-ecc-step-size = <512>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "U-Boot";
				reg = <0 0x200000>;
			};
			partition@200000 {
				label = "Linux";
				reg = <0x200000 0xe00000>;
			};
			partition@1000000 {
				label = "Filesystem";
				reg = <0x1000000 0x3f000000>;
			};
		};
	};
};

/* CON4 on CP1 expansion */
&cp1_sata0 {
	status = "okay";

	sata-port@0 {
		phys = <&cp1_comphy1 0>;
		phy-names = "cp1-sata0-0-phy";
	};
	sata-port@1 {
		phys = <&cp1_comphy3 1>;
		phy-names = "cp1-sata0-1-phy";
	};
};

&cp1_utmi {
	status = "okay";
};

/* CON9 on CP1 expansion */
&cp1_usb3_0 {
	usb-phy = <&cp1_usb3_0_phy>;
	phys = <&cp1_utmi0>;
	phy-names = "utmi";
	dr_mode = "host";
	status = "okay";
};

/* CON10 on CP1 expansion */
&cp1_usb3_1 {
	phys = <&cp1_utmi1>;
	phy-names = "utmi";
	status = "okay";
};

&cp1_mdio {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&cp1_ethernet {
	status = "okay";
};

&cp1_eth0 {
	status = "okay";
	phy-mode = "10gbase-r";

	fixed-link {
		speed = <10000>;
		full-duplex;
	};
};

&cp1_eth1 {
	status = "okay";
	phy = <&phy0>;
	phy-mode = "rgmii-id";
};

&ap_sdhci0 {
	status = "okay";
	bus-width = <4>;
	non-removable;
};

&cp0_sdhci0 {
	status = "okay";
	bus-width = <8>;
	non-removable;
};