Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * Copyright 2013 Gateworks Corporation |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/gpio/gpio.h> |
| 7 | #include <dt-bindings/input/linux-event-codes.h> |
| 8 | #include <dt-bindings/interrupt-controller/irq.h> |
| 9 | |
| 10 | / { |
| 11 | /* these are used by bootloader for disabling nodes */ |
| 12 | aliases { |
| 13 | led0 = &led0; |
| 14 | led1 = &led1; |
| 15 | led2 = &led2; |
| 16 | nand = &gpmi; |
| 17 | ssi0 = &ssi1; |
| 18 | usb0 = &usbh1; |
| 19 | usb1 = &usbotg; |
| 20 | }; |
| 21 | |
| 22 | chosen { |
| 23 | bootargs = "console=ttymxc1,115200"; |
| 24 | }; |
| 25 | |
| 26 | backlight { |
| 27 | compatible = "pwm-backlight"; |
Tom Rini | 762f85b | 2024-07-20 11:15:10 -0600 | [diff] [blame] | 28 | pwms = <&pwm4 0 5000000 0>; |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 29 | brightness-levels = <0 4 8 16 32 64 128 255>; |
| 30 | default-brightness-level = <7>; |
| 31 | }; |
| 32 | |
| 33 | gpio-keys { |
| 34 | compatible = "gpio-keys"; |
| 35 | |
| 36 | user-pb { |
| 37 | label = "user_pb"; |
| 38 | gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; |
| 39 | linux,code = <BTN_0>; |
| 40 | }; |
| 41 | |
| 42 | user-pb1x { |
| 43 | label = "user_pb1x"; |
| 44 | linux,code = <BTN_1>; |
| 45 | interrupt-parent = <&gsc>; |
| 46 | interrupts = <0>; |
| 47 | }; |
| 48 | |
| 49 | key-erased { |
| 50 | label = "key-erased"; |
| 51 | linux,code = <BTN_2>; |
| 52 | interrupt-parent = <&gsc>; |
| 53 | interrupts = <1>; |
| 54 | }; |
| 55 | |
| 56 | eeprom-wp { |
| 57 | label = "eeprom_wp"; |
| 58 | linux,code = <BTN_3>; |
| 59 | interrupt-parent = <&gsc>; |
| 60 | interrupts = <2>; |
| 61 | }; |
| 62 | |
| 63 | tamper { |
| 64 | label = "tamper"; |
| 65 | linux,code = <BTN_4>; |
| 66 | interrupt-parent = <&gsc>; |
| 67 | interrupts = <5>; |
| 68 | }; |
| 69 | |
| 70 | switch-hold { |
| 71 | label = "switch_hold"; |
| 72 | linux,code = <BTN_5>; |
| 73 | interrupt-parent = <&gsc>; |
| 74 | interrupts = <7>; |
| 75 | }; |
| 76 | }; |
| 77 | |
| 78 | leds { |
| 79 | compatible = "gpio-leds"; |
| 80 | pinctrl-names = "default"; |
| 81 | pinctrl-0 = <&pinctrl_gpio_leds>; |
| 82 | |
| 83 | led0: led-user1 { |
| 84 | label = "user1"; |
| 85 | gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ |
| 86 | default-state = "on"; |
| 87 | linux,default-trigger = "heartbeat"; |
| 88 | }; |
| 89 | |
| 90 | led1: led-user2 { |
| 91 | label = "user2"; |
| 92 | gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ |
| 93 | default-state = "off"; |
| 94 | }; |
| 95 | |
| 96 | led2: led-user3 { |
| 97 | label = "user3"; |
| 98 | gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ |
| 99 | default-state = "off"; |
| 100 | }; |
| 101 | }; |
| 102 | |
| 103 | memory@10000000 { |
| 104 | device_type = "memory"; |
| 105 | reg = <0x10000000 0x40000000>; |
| 106 | }; |
| 107 | |
| 108 | pps { |
| 109 | compatible = "pps-gpio"; |
| 110 | pinctrl-names = "default"; |
| 111 | pinctrl-0 = <&pinctrl_pps>; |
| 112 | gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; |
| 113 | status = "okay"; |
| 114 | }; |
| 115 | |
| 116 | reg_1p0v: regulator-1p0v { |
| 117 | compatible = "regulator-fixed"; |
| 118 | regulator-name = "1P0V"; |
| 119 | regulator-min-microvolt = <1000000>; |
| 120 | regulator-max-microvolt = <1000000>; |
| 121 | regulator-always-on; |
| 122 | }; |
| 123 | |
| 124 | reg_3p3v: regulator-3p3v { |
| 125 | compatible = "regulator-fixed"; |
| 126 | regulator-name = "3P3V"; |
| 127 | regulator-min-microvolt = <3300000>; |
| 128 | regulator-max-microvolt = <3300000>; |
| 129 | regulator-always-on; |
| 130 | }; |
| 131 | |
| 132 | reg_can1_stby: regulator-can1-stby { |
| 133 | compatible = "regulator-fixed"; |
| 134 | pinctrl-names = "default"; |
| 135 | pinctrl-0 = <&pinctrl_reg_can1>; |
| 136 | regulator-name = "can1_stby"; |
| 137 | gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; |
| 138 | regulator-min-microvolt = <3300000>; |
| 139 | regulator-max-microvolt = <3300000>; |
| 140 | }; |
| 141 | |
| 142 | reg_usb_h1_vbus: regulator-usb-h1-vbus { |
| 143 | compatible = "regulator-fixed"; |
| 144 | regulator-name = "usb_h1_vbus"; |
| 145 | regulator-min-microvolt = <5000000>; |
| 146 | regulator-max-microvolt = <5000000>; |
| 147 | regulator-always-on; |
| 148 | }; |
| 149 | |
| 150 | reg_usb_otg_vbus: regulator-usb-otg-vbus { |
| 151 | compatible = "regulator-fixed"; |
| 152 | regulator-name = "usb_otg_vbus"; |
| 153 | regulator-min-microvolt = <5000000>; |
| 154 | regulator-max-microvolt = <5000000>; |
| 155 | gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| 156 | enable-active-high; |
| 157 | }; |
| 158 | |
| 159 | sound { |
| 160 | compatible = "fsl,imx6q-ventana-sgtl5000", |
| 161 | "fsl,imx-audio-sgtl5000"; |
| 162 | model = "sgtl5000-audio"; |
| 163 | ssi-controller = <&ssi1>; |
| 164 | audio-codec = <&codec>; |
| 165 | audio-routing = |
| 166 | "MIC_IN", "Mic Jack", |
| 167 | "Mic Jack", "Mic Bias", |
| 168 | "Headphone Jack", "HP_OUT"; |
| 169 | mux-int-port = <1>; |
| 170 | mux-ext-port = <4>; |
| 171 | }; |
| 172 | }; |
| 173 | |
| 174 | &audmux { |
| 175 | pinctrl-names = "default"; |
| 176 | pinctrl-0 = <&pinctrl_audmux>; |
| 177 | status = "okay"; |
| 178 | }; |
| 179 | |
| 180 | &can1 { |
| 181 | pinctrl-names = "default"; |
| 182 | pinctrl-0 = <&pinctrl_flexcan1>; |
| 183 | xceiver-supply = <®_can1_stby>; |
| 184 | status = "okay"; |
| 185 | }; |
| 186 | |
| 187 | &clks { |
| 188 | assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, |
| 189 | <&clks IMX6QDL_CLK_LDB_DI1_SEL>; |
| 190 | assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, |
| 191 | <&clks IMX6QDL_CLK_PLL3_USB_OTG>; |
| 192 | }; |
| 193 | |
| 194 | &fec { |
| 195 | pinctrl-names = "default"; |
| 196 | pinctrl-0 = <&pinctrl_enet>; |
| 197 | phy-mode = "rgmii-id"; |
| 198 | phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; |
| 199 | status = "okay"; |
| 200 | }; |
| 201 | |
| 202 | &gpmi { |
| 203 | pinctrl-names = "default"; |
| 204 | pinctrl-0 = <&pinctrl_gpmi_nand>; |
| 205 | status = "okay"; |
| 206 | }; |
| 207 | |
| 208 | &hdmi { |
| 209 | ddc-i2c-bus = <&i2c3>; |
| 210 | status = "okay"; |
| 211 | }; |
| 212 | |
| 213 | &i2c1 { |
| 214 | clock-frequency = <100000>; |
| 215 | pinctrl-names = "default"; |
| 216 | pinctrl-0 = <&pinctrl_i2c1>; |
| 217 | status = "okay"; |
| 218 | |
| 219 | gsc: gsc@20 { |
| 220 | compatible = "gw,gsc"; |
| 221 | reg = <0x20>; |
| 222 | interrupt-parent = <&gpio1>; |
| 223 | interrupts = <4 IRQ_TYPE_LEVEL_LOW>; |
| 224 | interrupt-controller; |
| 225 | #interrupt-cells = <1>; |
| 226 | #size-cells = <0>; |
| 227 | |
| 228 | adc { |
| 229 | compatible = "gw,gsc-adc"; |
| 230 | #address-cells = <1>; |
| 231 | #size-cells = <0>; |
| 232 | |
| 233 | channel@0 { |
| 234 | gw,mode = <0>; |
| 235 | reg = <0x00>; |
| 236 | label = "temp"; |
| 237 | }; |
| 238 | |
| 239 | channel@2 { |
| 240 | gw,mode = <1>; |
| 241 | reg = <0x02>; |
| 242 | label = "vdd_vin"; |
| 243 | }; |
| 244 | |
| 245 | channel@5 { |
| 246 | gw,mode = <1>; |
| 247 | reg = <0x05>; |
| 248 | label = "vdd_3p3"; |
| 249 | }; |
| 250 | |
| 251 | channel@8 { |
| 252 | gw,mode = <1>; |
| 253 | reg = <0x08>; |
| 254 | label = "vdd_bat"; |
| 255 | }; |
| 256 | |
| 257 | channel@b { |
| 258 | gw,mode = <1>; |
| 259 | reg = <0x0b>; |
| 260 | label = "vdd_5p0"; |
| 261 | }; |
| 262 | |
| 263 | channel@e { |
| 264 | gw,mode = <1>; |
| 265 | reg = <0xe>; |
| 266 | label = "vdd_arm"; |
| 267 | }; |
| 268 | |
| 269 | channel@11 { |
| 270 | gw,mode = <1>; |
| 271 | reg = <0x11>; |
| 272 | label = "vdd_soc"; |
| 273 | }; |
| 274 | |
| 275 | channel@14 { |
| 276 | gw,mode = <1>; |
| 277 | reg = <0x14>; |
| 278 | label = "vdd_3p0"; |
| 279 | }; |
| 280 | |
| 281 | channel@17 { |
| 282 | gw,mode = <1>; |
| 283 | reg = <0x17>; |
| 284 | label = "vdd_1p5"; |
| 285 | }; |
| 286 | |
| 287 | channel@1d { |
| 288 | gw,mode = <1>; |
| 289 | reg = <0x1d>; |
| 290 | label = "vdd_1p8"; |
| 291 | }; |
| 292 | |
| 293 | channel@20 { |
| 294 | gw,mode = <1>; |
| 295 | reg = <0x20>; |
| 296 | label = "vdd_1p0"; |
| 297 | }; |
| 298 | |
| 299 | channel@23 { |
| 300 | gw,mode = <1>; |
| 301 | reg = <0x23>; |
| 302 | label = "vdd_2p5"; |
| 303 | }; |
| 304 | |
| 305 | channel@26 { |
| 306 | gw,mode = <1>; |
| 307 | reg = <0x26>; |
| 308 | label = "vdd_gps"; |
| 309 | }; |
| 310 | |
| 311 | channel@29 { |
| 312 | gw,mode = <1>; |
| 313 | reg = <0x29>; |
| 314 | label = "vdd_an1"; |
| 315 | }; |
| 316 | }; |
| 317 | }; |
| 318 | |
| 319 | gsc_gpio: gpio@23 { |
| 320 | compatible = "nxp,pca9555"; |
| 321 | reg = <0x23>; |
| 322 | gpio-controller; |
| 323 | #gpio-cells = <2>; |
| 324 | interrupt-parent = <&gsc>; |
| 325 | interrupts = <4>; |
| 326 | }; |
| 327 | |
| 328 | eeprom1: eeprom@50 { |
| 329 | compatible = "atmel,24c02"; |
| 330 | reg = <0x50>; |
| 331 | pagesize = <16>; |
| 332 | }; |
| 333 | |
| 334 | eeprom2: eeprom@51 { |
| 335 | compatible = "atmel,24c02"; |
| 336 | reg = <0x51>; |
| 337 | pagesize = <16>; |
| 338 | }; |
| 339 | |
| 340 | eeprom3: eeprom@52 { |
| 341 | compatible = "atmel,24c02"; |
| 342 | reg = <0x52>; |
| 343 | pagesize = <16>; |
| 344 | }; |
| 345 | |
| 346 | eeprom4: eeprom@53 { |
| 347 | compatible = "atmel,24c02"; |
| 348 | reg = <0x53>; |
| 349 | pagesize = <16>; |
| 350 | }; |
| 351 | |
| 352 | rtc: ds1672@68 { |
| 353 | compatible = "dallas,ds1672"; |
| 354 | reg = <0x68>; |
| 355 | }; |
| 356 | }; |
| 357 | |
| 358 | &i2c2 { |
| 359 | clock-frequency = <100000>; |
| 360 | pinctrl-names = "default"; |
| 361 | pinctrl-0 = <&pinctrl_i2c2>; |
| 362 | status = "okay"; |
| 363 | |
| 364 | ltc3676: pmic@3c { |
| 365 | compatible = "lltc,ltc3676"; |
| 366 | reg = <0x3c>; |
| 367 | interrupt-parent = <&gpio1>; |
| 368 | interrupts = <8 IRQ_TYPE_EDGE_FALLING>; |
| 369 | |
| 370 | regulators { |
| 371 | /* VDD_SOC (1+R1/R2 = 1.635) */ |
| 372 | reg_vdd_soc: sw1 { |
| 373 | regulator-name = "vddsoc"; |
| 374 | regulator-min-microvolt = <674400>; |
| 375 | regulator-max-microvolt = <1308000>; |
| 376 | lltc,fb-voltage-divider = <127000 200000>; |
| 377 | regulator-ramp-delay = <7000>; |
| 378 | regulator-boot-on; |
| 379 | regulator-always-on; |
| 380 | }; |
| 381 | |
| 382 | /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ |
| 383 | reg_1p8v: sw2 { |
| 384 | regulator-name = "vdd1p8"; |
| 385 | regulator-min-microvolt = <1033310>; |
| 386 | regulator-max-microvolt = <2004000>; |
| 387 | lltc,fb-voltage-divider = <301000 200000>; |
| 388 | regulator-ramp-delay = <7000>; |
| 389 | regulator-boot-on; |
| 390 | regulator-always-on; |
| 391 | }; |
| 392 | |
| 393 | /* VDD_ARM (1+R1/R2 = 1.635) */ |
| 394 | reg_vdd_arm: sw3 { |
| 395 | regulator-name = "vddarm"; |
| 396 | regulator-min-microvolt = <674400>; |
| 397 | regulator-max-microvolt = <1308000>; |
| 398 | lltc,fb-voltage-divider = <127000 200000>; |
| 399 | regulator-ramp-delay = <7000>; |
| 400 | regulator-boot-on; |
| 401 | regulator-always-on; |
| 402 | }; |
| 403 | |
| 404 | /* VDD_DDR (1+R1/R2 = 2.105) */ |
| 405 | reg_vdd_ddr: sw4 { |
| 406 | regulator-name = "vddddr"; |
| 407 | regulator-min-microvolt = <868310>; |
| 408 | regulator-max-microvolt = <1684000>; |
| 409 | lltc,fb-voltage-divider = <221000 200000>; |
| 410 | regulator-ramp-delay = <7000>; |
| 411 | regulator-boot-on; |
| 412 | regulator-always-on; |
| 413 | }; |
| 414 | |
| 415 | /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ |
| 416 | reg_2p5v: ldo2 { |
| 417 | regulator-name = "vdd2p5"; |
| 418 | regulator-min-microvolt = <2490375>; |
| 419 | regulator-max-microvolt = <2490375>; |
| 420 | lltc,fb-voltage-divider = <487000 200000>; |
| 421 | regulator-boot-on; |
| 422 | regulator-always-on; |
| 423 | }; |
| 424 | |
| 425 | /* VDD_AUD_1P8: Audio codec */ |
| 426 | reg_aud_1p8v: ldo3 { |
| 427 | regulator-name = "vdd1p8a"; |
| 428 | regulator-min-microvolt = <1800000>; |
| 429 | regulator-max-microvolt = <1800000>; |
| 430 | regulator-boot-on; |
| 431 | }; |
| 432 | |
| 433 | /* VDD_HIGH (1+R1/R2 = 4.17) */ |
| 434 | reg_3p0v: ldo4 { |
| 435 | regulator-name = "vdd3p0"; |
| 436 | regulator-min-microvolt = <3023250>; |
| 437 | regulator-max-microvolt = <3023250>; |
| 438 | lltc,fb-voltage-divider = <634000 200000>; |
| 439 | regulator-boot-on; |
| 440 | regulator-always-on; |
| 441 | }; |
| 442 | }; |
| 443 | }; |
| 444 | }; |
| 445 | |
| 446 | &i2c3 { |
| 447 | clock-frequency = <100000>; |
| 448 | pinctrl-names = "default"; |
| 449 | pinctrl-0 = <&pinctrl_i2c3>; |
| 450 | status = "okay"; |
| 451 | |
| 452 | codec: sgtl5000@a { |
| 453 | compatible = "fsl,sgtl5000"; |
| 454 | reg = <0x0a>; |
| 455 | #sound-dai-cells = <0>; |
| 456 | clocks = <&clks IMX6QDL_CLK_CKO>; |
| 457 | VDDA-supply = <®_1p8v>; |
| 458 | VDDIO-supply = <®_3p3v>; |
| 459 | }; |
| 460 | |
| 461 | touchscreen: egalax_ts@4 { |
| 462 | compatible = "eeti,egalax_ts"; |
| 463 | reg = <0x04>; |
| 464 | interrupt-parent = <&gpio1>; |
| 465 | interrupts = <11 2>; |
| 466 | wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| 467 | }; |
| 468 | |
| 469 | accel@1e { |
| 470 | compatible = "nxp,fxos8700"; |
| 471 | reg = <0x1e>; |
| 472 | }; |
| 473 | }; |
| 474 | |
| 475 | &ldb { |
| 476 | status = "okay"; |
| 477 | |
| 478 | lvds-channel@0 { |
| 479 | fsl,data-mapping = "spwg"; |
| 480 | fsl,data-width = <18>; |
| 481 | status = "okay"; |
| 482 | |
| 483 | display-timings { |
| 484 | native-mode = <&timing0>; |
Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame] | 485 | timing0: timing-hsd100pxn1 { |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 486 | clock-frequency = <65000000>; |
| 487 | hactive = <1024>; |
| 488 | vactive = <768>; |
| 489 | hback-porch = <220>; |
| 490 | hfront-porch = <40>; |
| 491 | vback-porch = <21>; |
| 492 | vfront-porch = <7>; |
| 493 | hsync-len = <60>; |
| 494 | vsync-len = <10>; |
| 495 | }; |
| 496 | }; |
| 497 | }; |
| 498 | }; |
| 499 | |
| 500 | &pcie { |
| 501 | pinctrl-names = "default"; |
| 502 | pinctrl-0 = <&pinctrl_pcie>; |
| 503 | reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; |
| 504 | status = "okay"; |
| 505 | }; |
| 506 | |
| 507 | &pwm2 { |
| 508 | pinctrl-names = "default"; |
| 509 | pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ |
| 510 | status = "disabled"; |
| 511 | }; |
| 512 | |
| 513 | &pwm3 { |
| 514 | pinctrl-names = "default"; |
| 515 | pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ |
| 516 | status = "disabled"; |
| 517 | }; |
| 518 | |
| 519 | &pwm4 { |
Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 520 | pinctrl-names = "default"; |
| 521 | pinctrl-0 = <&pinctrl_pwm4>; |
| 522 | status = "okay"; |
| 523 | }; |
| 524 | |
| 525 | &ssi1 { |
| 526 | status = "okay"; |
| 527 | }; |
| 528 | |
| 529 | &uart1 { |
| 530 | pinctrl-names = "default"; |
| 531 | pinctrl-0 = <&pinctrl_uart1>; |
| 532 | rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; |
| 533 | status = "okay"; |
| 534 | }; |
| 535 | |
| 536 | &uart2 { |
| 537 | pinctrl-names = "default"; |
| 538 | pinctrl-0 = <&pinctrl_uart2>; |
| 539 | status = "okay"; |
| 540 | }; |
| 541 | |
| 542 | &uart5 { |
| 543 | pinctrl-names = "default"; |
| 544 | pinctrl-0 = <&pinctrl_uart5>; |
| 545 | status = "okay"; |
| 546 | }; |
| 547 | |
| 548 | &usbotg { |
| 549 | vbus-supply = <®_usb_otg_vbus>; |
| 550 | pinctrl-names = "default"; |
| 551 | pinctrl-0 = <&pinctrl_usbotg>; |
| 552 | disable-over-current; |
| 553 | status = "okay"; |
| 554 | }; |
| 555 | |
| 556 | &usbh1 { |
| 557 | vbus-supply = <®_usb_h1_vbus>; |
| 558 | status = "okay"; |
| 559 | }; |
| 560 | |
| 561 | &usdhc3 { |
| 562 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 563 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 564 | pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| 565 | pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| 566 | cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; |
| 567 | vmmc-supply = <®_3p3v>; |
| 568 | no-1-8-v; /* firmware will remove if board revision supports */ |
| 569 | status = "okay"; |
| 570 | }; |
| 571 | |
| 572 | &wdog1 { |
| 573 | pinctrl-names = "default"; |
| 574 | pinctrl-0 = <&pinctrl_wdog>; |
| 575 | fsl,ext-reset-output; |
| 576 | }; |
| 577 | |
| 578 | &iomuxc { |
| 579 | pinctrl_audmux: audmuxgrp { |
| 580 | fsl,pins = < |
| 581 | MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 |
| 582 | MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 |
| 583 | MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 |
| 584 | MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 |
| 585 | MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ |
| 586 | >; |
| 587 | }; |
| 588 | |
| 589 | pinctrl_enet: enetgrp { |
| 590 | fsl,pins = < |
| 591 | MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| 592 | MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| 593 | MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| 594 | MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| 595 | MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| 596 | MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| 597 | MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 |
| 598 | MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 |
| 599 | MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 |
| 600 | MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 |
| 601 | MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 |
| 602 | MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 |
| 603 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| 604 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| 605 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| 606 | MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 |
| 607 | >; |
| 608 | }; |
| 609 | |
| 610 | pinctrl_flexcan1: flexcan1grp { |
| 611 | fsl,pins = < |
| 612 | MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 |
| 613 | MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 |
| 614 | >; |
| 615 | }; |
| 616 | |
| 617 | pinctrl_gpio_leds: gpioledsgrp { |
| 618 | fsl,pins = < |
| 619 | MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 |
| 620 | MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 |
| 621 | MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 |
| 622 | >; |
| 623 | }; |
| 624 | |
| 625 | pinctrl_gpmi_nand: gpminandgrp { |
| 626 | fsl,pins = < |
| 627 | MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 |
| 628 | MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 |
| 629 | MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 |
| 630 | MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 |
| 631 | MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 |
| 632 | MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 |
| 633 | MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 |
| 634 | MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 |
| 635 | MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 |
| 636 | MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 |
| 637 | MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 |
| 638 | MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 |
| 639 | MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 |
| 640 | MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 |
| 641 | MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 |
| 642 | >; |
| 643 | }; |
| 644 | |
| 645 | pinctrl_i2c1: i2c1grp { |
| 646 | fsl,pins = < |
| 647 | MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 |
| 648 | MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 |
| 649 | MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 |
| 650 | >; |
| 651 | }; |
| 652 | |
| 653 | pinctrl_i2c2: i2c2grp { |
| 654 | fsl,pins = < |
| 655 | MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| 656 | MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| 657 | >; |
| 658 | }; |
| 659 | |
| 660 | pinctrl_i2c3: i2c3grp { |
| 661 | fsl,pins = < |
| 662 | MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| 663 | MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| 664 | >; |
| 665 | }; |
| 666 | |
| 667 | pinctrl_pcie: pciegrp { |
| 668 | fsl,pins = < |
| 669 | MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */ |
| 670 | MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */ |
| 671 | >; |
| 672 | }; |
| 673 | |
| 674 | pinctrl_pmic: pmicgrp { |
| 675 | fsl,pins = < |
| 676 | MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ |
| 677 | >; |
| 678 | }; |
| 679 | |
| 680 | pinctrl_pps: ppsgrp { |
| 681 | fsl,pins = < |
| 682 | MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 |
| 683 | >; |
| 684 | }; |
| 685 | |
| 686 | pinctrl_pwm2: pwm2grp { |
| 687 | fsl,pins = < |
| 688 | MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 |
| 689 | >; |
| 690 | }; |
| 691 | |
| 692 | pinctrl_pwm3: pwm3grp { |
| 693 | fsl,pins = < |
| 694 | MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 |
| 695 | >; |
| 696 | }; |
| 697 | |
| 698 | pinctrl_pwm4: pwm4grp { |
| 699 | fsl,pins = < |
| 700 | MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 |
| 701 | >; |
| 702 | }; |
| 703 | |
| 704 | pinctrl_reg_can1: regcan1grp { |
| 705 | fsl,pins = < |
| 706 | MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ |
| 707 | >; |
| 708 | }; |
| 709 | |
| 710 | pinctrl_uart1: uart1grp { |
| 711 | fsl,pins = < |
| 712 | MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 |
| 713 | MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 |
| 714 | MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ |
| 715 | >; |
| 716 | }; |
| 717 | |
| 718 | pinctrl_uart2: uart2grp { |
| 719 | fsl,pins = < |
| 720 | MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 |
| 721 | MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 |
| 722 | >; |
| 723 | }; |
| 724 | |
| 725 | pinctrl_uart5: uart5grp { |
| 726 | fsl,pins = < |
| 727 | MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 |
| 728 | MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 |
| 729 | >; |
| 730 | }; |
| 731 | |
| 732 | pinctrl_usbotg: usbotggrp { |
| 733 | fsl,pins = < |
| 734 | MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 |
| 735 | MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ |
| 736 | MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ |
| 737 | >; |
| 738 | }; |
| 739 | |
| 740 | pinctrl_usdhc3: usdhc3grp { |
| 741 | fsl,pins = < |
| 742 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| 743 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| 744 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| 745 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| 746 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| 747 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| 748 | MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ |
| 749 | MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 |
| 750 | >; |
| 751 | }; |
| 752 | |
| 753 | pinctrl_usdhc3_100mhz: usdhc3grp100mhz { |
| 754 | fsl,pins = < |
| 755 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 |
| 756 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 |
| 757 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 |
| 758 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 |
| 759 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 |
| 760 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 |
| 761 | MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ |
| 762 | MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 |
| 763 | >; |
| 764 | }; |
| 765 | |
| 766 | pinctrl_usdhc3_200mhz: usdhc3grp200mhz { |
| 767 | fsl,pins = < |
| 768 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 |
| 769 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 |
| 770 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 |
| 771 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 |
| 772 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 |
| 773 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 |
| 774 | MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ |
| 775 | MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 |
| 776 | >; |
| 777 | }; |
| 778 | |
| 779 | pinctrl_wdog: wdoggrp { |
| 780 | fsl,pins = < |
| 781 | MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 |
| 782 | >; |
| 783 | }; |
| 784 | }; |