Heiko Schocher | 41b64a8 | 2020-02-06 09:48:16 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * QE UEC ethernet controller driver |
| 4 | * |
| 5 | * based on drivers/qe/uec.c from NXP |
| 6 | * |
| 7 | * Copyright (C) 2020 Heiko Schocher <hs@denx.de> |
| 8 | */ |
| 9 | |
| 10 | #include <common.h> |
| 11 | #include <dm.h> |
| 12 | #include <errno.h> |
| 13 | #include <memalign.h> |
| 14 | #include <miiphy.h> |
| 15 | #include <asm/io.h> |
| 16 | |
| 17 | #include "dm_qe_uec.h" |
| 18 | |
| 19 | #define QE_UEC_DRIVER_NAME "ucc_geth" |
| 20 | |
| 21 | /* Default UTBIPAR SMI address */ |
| 22 | #ifndef CONFIG_UTBIPAR_INIT_TBIPA |
| 23 | #define CONFIG_UTBIPAR_INIT_TBIPA 0x1F |
| 24 | #endif |
| 25 | |
| 26 | static int uec_mac_enable(struct uec_priv *uec, comm_dir_e mode) |
| 27 | { |
| 28 | uec_t *uec_regs; |
| 29 | u32 maccfg1; |
| 30 | |
| 31 | uec_regs = uec->uec_regs; |
| 32 | maccfg1 = in_be32(&uec_regs->maccfg1); |
| 33 | |
| 34 | if (mode & COMM_DIR_TX) { |
| 35 | maccfg1 |= MACCFG1_ENABLE_TX; |
| 36 | out_be32(&uec_regs->maccfg1, maccfg1); |
| 37 | uec->mac_tx_enabled = 1; |
| 38 | } |
| 39 | |
| 40 | if (mode & COMM_DIR_RX) { |
| 41 | maccfg1 |= MACCFG1_ENABLE_RX; |
| 42 | out_be32(&uec_regs->maccfg1, maccfg1); |
| 43 | uec->mac_rx_enabled = 1; |
| 44 | } |
| 45 | |
| 46 | return 0; |
| 47 | } |
| 48 | |
| 49 | static int uec_mac_disable(struct uec_priv *uec, comm_dir_e mode) |
| 50 | { |
| 51 | uec_t *uec_regs; |
| 52 | u32 maccfg1; |
| 53 | |
| 54 | uec_regs = uec->uec_regs; |
| 55 | maccfg1 = in_be32(&uec_regs->maccfg1); |
| 56 | |
| 57 | if (mode & COMM_DIR_TX) { |
| 58 | maccfg1 &= ~MACCFG1_ENABLE_TX; |
| 59 | out_be32(&uec_regs->maccfg1, maccfg1); |
| 60 | uec->mac_tx_enabled = 0; |
| 61 | } |
| 62 | |
| 63 | if (mode & COMM_DIR_RX) { |
| 64 | maccfg1 &= ~MACCFG1_ENABLE_RX; |
| 65 | out_be32(&uec_regs->maccfg1, maccfg1); |
| 66 | uec->mac_rx_enabled = 0; |
| 67 | } |
| 68 | |
| 69 | return 0; |
| 70 | } |
| 71 | |
| 72 | static int uec_restart_tx(struct uec_priv *uec) |
| 73 | { |
| 74 | struct uec_inf *ui = uec->uec_info; |
| 75 | u32 cecr_subblock; |
| 76 | |
| 77 | cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num); |
| 78 | qe_issue_cmd(QE_RESTART_TX, cecr_subblock, |
| 79 | (u8)QE_CR_PROTOCOL_ETHERNET, 0); |
| 80 | |
| 81 | uec->grace_stopped_tx = 0; |
| 82 | |
| 83 | return 0; |
| 84 | } |
| 85 | |
| 86 | static int uec_restart_rx(struct uec_priv *uec) |
| 87 | { |
| 88 | struct uec_inf *ui = uec->uec_info; |
| 89 | u32 cecr_subblock; |
| 90 | |
| 91 | cecr_subblock = ucc_fast_get_qe_cr_subblock(ui->uf_info.ucc_num); |
| 92 | qe_issue_cmd(QE_RESTART_RX, cecr_subblock, |
| 93 | (u8)QE_CR_PROTOCOL_ETHERNET, 0); |
| 94 | |
| 95 | uec->grace_stopped_rx = 0; |
| 96 | |
| 97 | return 0; |
| 98 | } |
| 99 | |
| 100 | static int uec_open(struct uec_priv *uec, comm_dir_e mode) |
| 101 | { |
| 102 | struct ucc_fast_priv *uccf; |
| 103 | |
| 104 | uccf = uec->uccf; |
| 105 | |
| 106 | /* check if the UCC number is in range. */ |
| 107 | if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { |
| 108 | printf("%s: ucc_num out of range.\n", __func__); |
| 109 | return -EINVAL; |
| 110 | } |
| 111 | |
| 112 | /* Enable MAC */ |
| 113 | uec_mac_enable(uec, mode); |
| 114 | |
| 115 | /* Enable UCC fast */ |
| 116 | ucc_fast_enable(uccf, mode); |
| 117 | |
| 118 | /* RISC microcode start */ |
| 119 | if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) |
| 120 | uec_restart_tx(uec); |
| 121 | |
| 122 | if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) |
| 123 | uec_restart_rx(uec); |
| 124 | |
| 125 | return 0; |
| 126 | } |
| 127 | |
| 128 | static int uec_set_mac_if_mode(struct uec_priv *uec) |
| 129 | { |
| 130 | struct uec_inf *uec_info = uec->uec_info; |
| 131 | phy_interface_t enet_if_mode; |
| 132 | uec_t *uec_regs; |
| 133 | u32 upsmr; |
| 134 | u32 maccfg2; |
| 135 | |
| 136 | uec_regs = uec->uec_regs; |
| 137 | enet_if_mode = uec_info->enet_interface_type; |
| 138 | |
| 139 | maccfg2 = in_be32(&uec_regs->maccfg2); |
| 140 | maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK; |
| 141 | |
| 142 | upsmr = in_be32(&uec->uccf->uf_regs->upsmr); |
| 143 | upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM); |
| 144 | |
| 145 | switch (uec_info->speed) { |
| 146 | case SPEED_10: |
| 147 | maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; |
| 148 | switch (enet_if_mode) { |
| 149 | case PHY_INTERFACE_MODE_MII: |
| 150 | break; |
| 151 | case PHY_INTERFACE_MODE_RGMII: |
| 152 | upsmr |= (UPSMR_RPM | UPSMR_R10M); |
| 153 | break; |
| 154 | case PHY_INTERFACE_MODE_RMII: |
| 155 | upsmr |= (UPSMR_R10M | UPSMR_RMM); |
| 156 | break; |
| 157 | default: |
| 158 | return -EINVAL; |
| 159 | } |
| 160 | break; |
| 161 | case SPEED_100: |
| 162 | maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; |
| 163 | switch (enet_if_mode) { |
| 164 | case PHY_INTERFACE_MODE_MII: |
| 165 | break; |
| 166 | case PHY_INTERFACE_MODE_RGMII: |
| 167 | upsmr |= UPSMR_RPM; |
| 168 | break; |
| 169 | case PHY_INTERFACE_MODE_RMII: |
| 170 | upsmr |= UPSMR_RMM; |
| 171 | break; |
| 172 | default: |
| 173 | return -EINVAL; |
| 174 | } |
| 175 | break; |
| 176 | case SPEED_1000: |
| 177 | maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; |
| 178 | switch (enet_if_mode) { |
| 179 | case PHY_INTERFACE_MODE_GMII: |
| 180 | break; |
| 181 | case PHY_INTERFACE_MODE_TBI: |
| 182 | upsmr |= UPSMR_TBIM; |
| 183 | break; |
| 184 | case PHY_INTERFACE_MODE_RTBI: |
| 185 | upsmr |= (UPSMR_RPM | UPSMR_TBIM); |
| 186 | break; |
| 187 | case PHY_INTERFACE_MODE_RGMII_RXID: |
| 188 | case PHY_INTERFACE_MODE_RGMII_TXID: |
| 189 | case PHY_INTERFACE_MODE_RGMII_ID: |
| 190 | case PHY_INTERFACE_MODE_RGMII: |
| 191 | upsmr |= UPSMR_RPM; |
| 192 | break; |
| 193 | case PHY_INTERFACE_MODE_SGMII: |
| 194 | upsmr |= UPSMR_SGMM; |
| 195 | break; |
| 196 | default: |
| 197 | return -EINVAL; |
| 198 | } |
| 199 | break; |
| 200 | default: |
| 201 | return -EINVAL; |
| 202 | } |
| 203 | |
| 204 | out_be32(&uec_regs->maccfg2, maccfg2); |
| 205 | out_be32(&uec->uccf->uf_regs->upsmr, upsmr); |
| 206 | |
| 207 | return 0; |
| 208 | } |
| 209 | |
| 210 | static int qe_uec_start(struct udevice *dev) |
| 211 | { |
| 212 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 213 | struct uec_priv *uec = priv->uec; |
| 214 | struct phy_device *phydev = priv->phydev; |
| 215 | struct uec_inf *uec_info = uec->uec_info; |
| 216 | int err; |
| 217 | |
| 218 | if (!phydev) |
| 219 | return -ENODEV; |
| 220 | |
| 221 | /* Setup MAC interface mode */ |
| 222 | genphy_update_link(phydev); |
| 223 | genphy_parse_link(phydev); |
| 224 | uec_info->speed = phydev->speed; |
| 225 | uec_set_mac_if_mode(uec); |
| 226 | |
| 227 | err = uec_open(uec, COMM_DIR_RX_AND_TX); |
| 228 | if (err) { |
| 229 | printf("%s: cannot enable UEC device\n", dev->name); |
| 230 | return -EINVAL; |
| 231 | } |
| 232 | |
| 233 | return (phydev->link ? 0 : -EINVAL); |
| 234 | } |
| 235 | |
| 236 | static int qe_uec_send(struct udevice *dev, void *packet, int length) |
| 237 | { |
| 238 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 239 | struct uec_priv *uec = priv->uec; |
| 240 | struct ucc_fast_priv *uccf = uec->uccf; |
| 241 | struct buffer_descriptor *bd; |
| 242 | u16 status; |
| 243 | int i; |
| 244 | int result = 0; |
| 245 | |
| 246 | uccf = uec->uccf; |
| 247 | bd = uec->tx_bd; |
| 248 | |
| 249 | /* Find an empty TxBD */ |
| 250 | for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) { |
| 251 | if (i > 0x100000) { |
| 252 | printf("%s: tx buffer not ready\n", dev->name); |
| 253 | return result; |
| 254 | } |
| 255 | } |
| 256 | |
| 257 | /* Init TxBD */ |
| 258 | BD_DATA_SET(bd, packet); |
| 259 | BD_LENGTH_SET(bd, length); |
| 260 | status = BD_STATUS(bd); |
| 261 | status &= BD_WRAP; |
| 262 | status |= (TX_BD_READY | TX_BD_LAST); |
| 263 | BD_STATUS_SET(bd, status); |
| 264 | |
| 265 | /* Tell UCC to transmit the buffer */ |
| 266 | ucc_fast_transmit_on_demand(uccf); |
| 267 | |
| 268 | /* Wait for buffer to be transmitted */ |
| 269 | for (i = 0; BD_STATUS(bd) & TX_BD_READY; i++) { |
| 270 | if (i > 0x100000) { |
| 271 | printf("%s: tx error\n", dev->name); |
| 272 | return result; |
| 273 | } |
| 274 | } |
| 275 | |
| 276 | /* Ok, the buffer be transimitted */ |
| 277 | BD_ADVANCE(bd, status, uec->p_tx_bd_ring); |
| 278 | uec->tx_bd = bd; |
| 279 | result = 1; |
| 280 | |
| 281 | return result; |
| 282 | } |
| 283 | |
| 284 | /* |
| 285 | * Receive frame: |
| 286 | * - wait for the next BD to get ready bit set |
| 287 | * - clean up the descriptor |
| 288 | * - move on and indicate to HW that the cleaned BD is available for Rx |
| 289 | */ |
| 290 | static int qe_uec_recv(struct udevice *dev, int flags, uchar **packetp) |
| 291 | { |
| 292 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 293 | struct uec_priv *uec = priv->uec; |
| 294 | struct buffer_descriptor *bd; |
| 295 | u16 status; |
| 296 | u16 len = 0; |
| 297 | u8 *data; |
| 298 | |
| 299 | *packetp = memalign(ARCH_DMA_MINALIGN, MAX_RXBUF_LEN); |
| 300 | if (*packetp == 0) { |
| 301 | printf("%s: error allocating packetp\n", __func__); |
| 302 | return -ENOMEM; |
| 303 | } |
| 304 | |
| 305 | bd = uec->rx_bd; |
| 306 | status = BD_STATUS(bd); |
| 307 | |
| 308 | while (!(status & RX_BD_EMPTY)) { |
| 309 | if (!(status & RX_BD_ERROR)) { |
| 310 | data = BD_DATA(bd); |
| 311 | len = BD_LENGTH(bd); |
| 312 | memcpy(*packetp, (char *)data, len); |
| 313 | } else { |
| 314 | printf("%s: Rx error\n", dev->name); |
| 315 | } |
| 316 | status &= BD_CLEAN; |
| 317 | BD_LENGTH_SET(bd, 0); |
| 318 | BD_STATUS_SET(bd, status | RX_BD_EMPTY); |
| 319 | BD_ADVANCE(bd, status, uec->p_rx_bd_ring); |
| 320 | status = BD_STATUS(bd); |
| 321 | } |
| 322 | uec->rx_bd = bd; |
| 323 | |
| 324 | return len; |
| 325 | } |
| 326 | |
| 327 | static int uec_graceful_stop_tx(struct uec_priv *uec) |
| 328 | { |
| 329 | ucc_fast_t *uf_regs; |
| 330 | u32 cecr_subblock; |
| 331 | u32 ucce; |
| 332 | |
| 333 | uf_regs = uec->uccf->uf_regs; |
| 334 | |
| 335 | /* Clear the grace stop event */ |
| 336 | out_be32(&uf_regs->ucce, UCCE_GRA); |
| 337 | |
| 338 | /* Issue host command */ |
| 339 | cecr_subblock = |
| 340 | ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); |
| 341 | qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock, |
| 342 | (u8)QE_CR_PROTOCOL_ETHERNET, 0); |
| 343 | |
| 344 | /* Wait for command to complete */ |
| 345 | do { |
| 346 | ucce = in_be32(&uf_regs->ucce); |
| 347 | } while (!(ucce & UCCE_GRA)); |
| 348 | |
| 349 | uec->grace_stopped_tx = 1; |
| 350 | |
| 351 | return 0; |
| 352 | } |
| 353 | |
| 354 | static int uec_graceful_stop_rx(struct uec_priv *uec) |
| 355 | { |
| 356 | u32 cecr_subblock; |
| 357 | u8 ack; |
| 358 | |
| 359 | if (!uec->p_rx_glbl_pram) { |
| 360 | printf("%s: No init rx global parameter\n", __func__); |
| 361 | return -EINVAL; |
| 362 | } |
| 363 | |
| 364 | /* Clear acknowledge bit */ |
| 365 | ack = uec->p_rx_glbl_pram->rxgstpack; |
| 366 | ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX; |
| 367 | uec->p_rx_glbl_pram->rxgstpack = ack; |
| 368 | |
| 369 | /* Keep issuing cmd and checking ack bit until it is asserted */ |
| 370 | do { |
| 371 | /* Issue host command */ |
| 372 | cecr_subblock = |
| 373 | ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); |
| 374 | qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock, |
| 375 | (u8)QE_CR_PROTOCOL_ETHERNET, 0); |
| 376 | ack = uec->p_rx_glbl_pram->rxgstpack; |
| 377 | } while (!(ack & GRACEFUL_STOP_ACKNOWLEDGE_RX)); |
| 378 | |
| 379 | uec->grace_stopped_rx = 1; |
| 380 | |
| 381 | return 0; |
| 382 | } |
| 383 | |
| 384 | static int uec_stop(struct uec_priv *uec, comm_dir_e mode) |
| 385 | { |
| 386 | /* check if the UCC number is in range. */ |
| 387 | if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { |
| 388 | printf("%s: ucc_num out of range.\n", __func__); |
| 389 | return -EINVAL; |
| 390 | } |
| 391 | /* Stop any transmissions */ |
| 392 | if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) |
| 393 | uec_graceful_stop_tx(uec); |
| 394 | |
| 395 | /* Stop any receptions */ |
| 396 | if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) |
| 397 | uec_graceful_stop_rx(uec); |
| 398 | |
| 399 | /* Disable the UCC fast */ |
| 400 | ucc_fast_disable(uec->uccf, mode); |
| 401 | |
| 402 | /* Disable the MAC */ |
| 403 | uec_mac_disable(uec, mode); |
| 404 | |
| 405 | return 0; |
| 406 | } |
| 407 | |
| 408 | static void qe_uec_stop(struct udevice *dev) |
| 409 | { |
| 410 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 411 | struct uec_priv *uec = priv->uec; |
| 412 | |
| 413 | uec_stop(uec, COMM_DIR_RX_AND_TX); |
| 414 | } |
| 415 | |
| 416 | static int qe_uec_set_hwaddr(struct udevice *dev) |
| 417 | { |
| 418 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 419 | struct eth_pdata *pdata = dev_get_platdata(dev); |
| 420 | struct uec_priv *uec = priv->uec; |
| 421 | uec_t *uec_regs = uec->uec_regs; |
| 422 | uchar *mac = pdata->enetaddr; |
| 423 | u32 mac_addr1; |
| 424 | u32 mac_addr2; |
| 425 | |
| 426 | /* |
| 427 | * if a station address of 0x12345678ABCD, perform a write to |
| 428 | * MACSTNADDR1 of 0xCDAB7856, |
| 429 | * MACSTNADDR2 of 0x34120000 |
| 430 | */ |
| 431 | |
| 432 | mac_addr1 = (mac[5] << 24) | (mac[4] << 16) | |
| 433 | (mac[3] << 8) | (mac[2]); |
| 434 | out_be32(&uec_regs->macstnaddr1, mac_addr1); |
| 435 | |
| 436 | mac_addr2 = ((mac[1] << 24) | (mac[0] << 16)) & 0xffff0000; |
| 437 | out_be32(&uec_regs->macstnaddr2, mac_addr2); |
| 438 | |
| 439 | return 0; |
| 440 | } |
| 441 | |
| 442 | static int qe_uec_free_pkt(struct udevice *dev, uchar *packet, int length) |
| 443 | { |
| 444 | if (packet) |
| 445 | free(packet); |
| 446 | |
| 447 | return 0; |
| 448 | } |
| 449 | |
| 450 | static const struct eth_ops qe_uec_eth_ops = { |
| 451 | .start = qe_uec_start, |
| 452 | .send = qe_uec_send, |
| 453 | .recv = qe_uec_recv, |
| 454 | .free_pkt = qe_uec_free_pkt, |
| 455 | .stop = qe_uec_stop, |
| 456 | .write_hwaddr = qe_uec_set_hwaddr, |
| 457 | }; |
| 458 | |
| 459 | static int uec_convert_threads_num(enum uec_num_of_threads threads_num, |
| 460 | int *threads_num_ret) |
| 461 | { |
| 462 | int num_threads_numerica; |
| 463 | |
| 464 | switch (threads_num) { |
| 465 | case UEC_NUM_OF_THREADS_1: |
| 466 | num_threads_numerica = 1; |
| 467 | break; |
| 468 | case UEC_NUM_OF_THREADS_2: |
| 469 | num_threads_numerica = 2; |
| 470 | break; |
| 471 | case UEC_NUM_OF_THREADS_4: |
| 472 | num_threads_numerica = 4; |
| 473 | break; |
| 474 | case UEC_NUM_OF_THREADS_6: |
| 475 | num_threads_numerica = 6; |
| 476 | break; |
| 477 | case UEC_NUM_OF_THREADS_8: |
| 478 | num_threads_numerica = 8; |
| 479 | break; |
| 480 | default: |
| 481 | printf("%s: Bad number of threads value.", |
| 482 | __func__); |
| 483 | return -EINVAL; |
| 484 | } |
| 485 | |
| 486 | *threads_num_ret = num_threads_numerica; |
| 487 | |
| 488 | return 0; |
| 489 | } |
| 490 | |
| 491 | static void uec_init_tx_parameter(struct uec_priv *uec, int num_threads_tx) |
| 492 | { |
| 493 | struct uec_inf *uec_info; |
| 494 | u32 end_bd; |
| 495 | u8 bmrx = 0; |
| 496 | int i; |
| 497 | |
| 498 | uec_info = uec->uec_info; |
| 499 | |
| 500 | /* Alloc global Tx parameter RAM page */ |
| 501 | uec->tx_glbl_pram_offset = |
| 502 | qe_muram_alloc(sizeof(struct uec_tx_global_pram), |
| 503 | UEC_TX_GLOBAL_PRAM_ALIGNMENT); |
| 504 | uec->p_tx_glbl_pram = (struct uec_tx_global_pram *) |
| 505 | qe_muram_addr(uec->tx_glbl_pram_offset); |
| 506 | |
| 507 | /* Zero the global Tx prameter RAM */ |
| 508 | memset(uec->p_tx_glbl_pram, 0, sizeof(struct uec_tx_global_pram)); |
| 509 | |
| 510 | /* Init global Tx parameter RAM */ |
| 511 | |
| 512 | /* TEMODER, RMON statistics disable, one Tx queue */ |
| 513 | out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE); |
| 514 | |
| 515 | /* SQPTR */ |
| 516 | uec->send_q_mem_reg_offset = |
| 517 | qe_muram_alloc(sizeof(struct uec_send_queue_qd), |
| 518 | UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT); |
| 519 | uec->p_send_q_mem_reg = (struct uec_send_queue_mem_region *) |
| 520 | qe_muram_addr(uec->send_q_mem_reg_offset); |
| 521 | out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset); |
| 522 | |
| 523 | /* Setup the table with TxBDs ring */ |
| 524 | end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1) |
| 525 | * SIZEOFBD; |
| 526 | out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base, |
| 527 | (u32)(uec->p_tx_bd_ring)); |
| 528 | out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address, |
| 529 | end_bd); |
| 530 | |
| 531 | /* Scheduler Base Pointer, we have only one Tx queue, no need it */ |
| 532 | out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0); |
| 533 | |
| 534 | /* TxRMON Base Pointer, TxRMON disable, we don't need it */ |
| 535 | out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0); |
| 536 | |
| 537 | /* TSTATE, global snooping, big endian, the CSB bus selected */ |
| 538 | bmrx = BMR_INIT_VALUE; |
| 539 | out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT)); |
| 540 | |
| 541 | /* IPH_Offset */ |
| 542 | for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) |
| 543 | out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0); |
| 544 | |
| 545 | /* VTAG table */ |
| 546 | for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) |
| 547 | out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0); |
| 548 | |
| 549 | /* TQPTR */ |
| 550 | uec->thread_dat_tx_offset = |
| 551 | qe_muram_alloc(num_threads_tx * |
| 552 | sizeof(struct uec_thread_data_tx) + |
| 553 | 32 * (num_threads_tx == 1), |
| 554 | UEC_THREAD_DATA_ALIGNMENT); |
| 555 | |
| 556 | uec->p_thread_data_tx = (struct uec_thread_data_tx *) |
| 557 | qe_muram_addr(uec->thread_dat_tx_offset); |
| 558 | out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset); |
| 559 | } |
| 560 | |
| 561 | static void uec_init_rx_parameter(struct uec_priv *uec, int num_threads_rx) |
| 562 | { |
| 563 | u8 bmrx = 0; |
| 564 | int i; |
| 565 | struct uec_82xx_add_filtering_pram *p_af_pram; |
| 566 | |
| 567 | /* Allocate global Rx parameter RAM page */ |
| 568 | uec->rx_glbl_pram_offset = |
| 569 | qe_muram_alloc(sizeof(struct uec_rx_global_pram), |
| 570 | UEC_RX_GLOBAL_PRAM_ALIGNMENT); |
| 571 | uec->p_rx_glbl_pram = (struct uec_rx_global_pram *) |
| 572 | qe_muram_addr(uec->rx_glbl_pram_offset); |
| 573 | |
| 574 | /* Zero Global Rx parameter RAM */ |
| 575 | memset(uec->p_rx_glbl_pram, 0, sizeof(struct uec_rx_global_pram)); |
| 576 | |
| 577 | /* Init global Rx parameter RAM */ |
| 578 | /* |
| 579 | * REMODER, Extended feature mode disable, VLAN disable, |
| 580 | * LossLess flow control disable, Receive firmware statisic disable, |
| 581 | * Extended address parsing mode disable, One Rx queues, |
| 582 | * Dynamic maximum/minimum frame length disable, IP checksum check |
| 583 | * disable, IP address alignment disable |
| 584 | */ |
| 585 | out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE); |
| 586 | |
| 587 | /* RQPTR */ |
| 588 | uec->thread_dat_rx_offset = |
| 589 | qe_muram_alloc(num_threads_rx * |
| 590 | sizeof(struct uec_thread_data_rx), |
| 591 | UEC_THREAD_DATA_ALIGNMENT); |
| 592 | uec->p_thread_data_rx = (struct uec_thread_data_rx *) |
| 593 | qe_muram_addr(uec->thread_dat_rx_offset); |
| 594 | out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset); |
| 595 | |
| 596 | /* Type_or_Len */ |
| 597 | out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072); |
| 598 | |
| 599 | /* RxRMON base pointer, we don't need it */ |
| 600 | out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0); |
| 601 | |
| 602 | /* IntCoalescingPTR, we don't need it, no interrupt */ |
| 603 | out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0); |
| 604 | |
| 605 | /* RSTATE, global snooping, big endian, the CSB bus selected */ |
| 606 | bmrx = BMR_INIT_VALUE; |
| 607 | out_8(&uec->p_rx_glbl_pram->rstate, bmrx); |
| 608 | |
| 609 | /* MRBLR */ |
| 610 | out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN); |
| 611 | |
| 612 | /* RBDQPTR */ |
| 613 | uec->rx_bd_qs_tbl_offset = |
| 614 | qe_muram_alloc(sizeof(struct uec_rx_bd_queues_entry) + |
| 615 | sizeof(struct uec_rx_pref_bds), |
| 616 | UEC_RX_BD_QUEUES_ALIGNMENT); |
| 617 | uec->p_rx_bd_qs_tbl = (struct uec_rx_bd_queues_entry *) |
| 618 | qe_muram_addr(uec->rx_bd_qs_tbl_offset); |
| 619 | |
| 620 | /* Zero it */ |
| 621 | memset(uec->p_rx_bd_qs_tbl, 0, sizeof(struct uec_rx_bd_queues_entry) + |
| 622 | sizeof(struct uec_rx_pref_bds)); |
| 623 | out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset); |
| 624 | out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr, |
| 625 | (u32)uec->p_rx_bd_ring); |
| 626 | |
| 627 | /* MFLR */ |
| 628 | out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN); |
| 629 | /* MINFLR */ |
| 630 | out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN); |
| 631 | /* MAXD1 */ |
| 632 | out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN); |
| 633 | /* MAXD2 */ |
| 634 | out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN); |
| 635 | /* ECAM_PTR */ |
| 636 | out_be32(&uec->p_rx_glbl_pram->ecamptr, 0); |
| 637 | /* L2QT */ |
| 638 | out_be32(&uec->p_rx_glbl_pram->l2qt, 0); |
| 639 | /* L3QT */ |
| 640 | for (i = 0; i < 8; i++) |
| 641 | out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0); |
| 642 | |
| 643 | /* VLAN_TYPE */ |
| 644 | out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100); |
| 645 | /* TCI */ |
| 646 | out_be16(&uec->p_rx_glbl_pram->vlantci, 0); |
| 647 | |
| 648 | /* Clear PQ2 style address filtering hash table */ |
| 649 | p_af_pram = (struct uec_82xx_add_filtering_pram *) |
| 650 | uec->p_rx_glbl_pram->addressfiltering; |
| 651 | |
| 652 | p_af_pram->iaddr_h = 0; |
| 653 | p_af_pram->iaddr_l = 0; |
| 654 | p_af_pram->gaddr_h = 0; |
| 655 | p_af_pram->gaddr_l = 0; |
| 656 | } |
| 657 | |
| 658 | static int uec_issue_init_enet_rxtx_cmd(struct uec_priv *uec, |
| 659 | int thread_tx, int thread_rx) |
| 660 | { |
| 661 | struct uec_init_cmd_pram *p_init_enet_param; |
| 662 | u32 init_enet_param_offset; |
| 663 | struct uec_inf *uec_info; |
| 664 | struct ucc_fast_inf *uf_info; |
| 665 | int i; |
| 666 | int snum; |
| 667 | u32 off; |
| 668 | u32 entry_val; |
| 669 | u32 command; |
| 670 | u32 cecr_subblock; |
| 671 | |
| 672 | uec_info = uec->uec_info; |
| 673 | uf_info = &uec_info->uf_info; |
| 674 | |
| 675 | /* Allocate init enet command parameter */ |
| 676 | uec->init_enet_param_offset = |
| 677 | qe_muram_alloc(sizeof(struct uec_init_cmd_pram), 4); |
| 678 | init_enet_param_offset = uec->init_enet_param_offset; |
| 679 | uec->p_init_enet_param = (struct uec_init_cmd_pram *) |
| 680 | qe_muram_addr(uec->init_enet_param_offset); |
| 681 | |
| 682 | /* Zero init enet command struct */ |
| 683 | memset((void *)uec->p_init_enet_param, 0, |
| 684 | sizeof(struct uec_init_cmd_pram)); |
| 685 | |
| 686 | /* Init the command struct */ |
| 687 | p_init_enet_param = uec->p_init_enet_param; |
| 688 | p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0; |
| 689 | p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1; |
| 690 | p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2; |
| 691 | p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3; |
| 692 | p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4; |
| 693 | p_init_enet_param->largestexternallookupkeysize = 0; |
| 694 | |
| 695 | p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx) |
| 696 | << ENET_INIT_PARAM_RGF_SHIFT; |
| 697 | p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx) |
| 698 | << ENET_INIT_PARAM_TGF_SHIFT; |
| 699 | |
| 700 | /* Init Rx global parameter pointer */ |
| 701 | p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset | |
| 702 | (u32)uec_info->risc_rx; |
| 703 | |
| 704 | /* Init Rx threads */ |
| 705 | for (i = 0; i < (thread_rx + 1); i++) { |
| 706 | snum = qe_get_snum(); |
| 707 | if (snum < 0) { |
| 708 | printf("%s can not get snum\n", __func__); |
| 709 | return -ENOMEM; |
| 710 | } |
| 711 | |
| 712 | if (i == 0) { |
| 713 | off = 0; |
| 714 | } else { |
| 715 | off = qe_muram_alloc(sizeof(struct uec_thread_rx_pram), |
| 716 | UEC_THREAD_RX_PRAM_ALIGNMENT); |
| 717 | } |
| 718 | |
| 719 | entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | |
| 720 | off | (u32)uec_info->risc_rx; |
| 721 | p_init_enet_param->rxthread[i] = entry_val; |
| 722 | } |
| 723 | |
| 724 | /* Init Tx global parameter pointer */ |
| 725 | p_init_enet_param->txglobal = uec->tx_glbl_pram_offset | |
| 726 | (u32)uec_info->risc_tx; |
| 727 | |
| 728 | /* Init Tx threads */ |
| 729 | for (i = 0; i < thread_tx; i++) { |
| 730 | snum = qe_get_snum(); |
| 731 | if (snum < 0) { |
| 732 | printf("%s can not get snum\n", __func__); |
| 733 | return -ENOMEM; |
| 734 | } |
| 735 | |
| 736 | off = qe_muram_alloc(sizeof(struct uec_thread_tx_pram), |
| 737 | UEC_THREAD_TX_PRAM_ALIGNMENT); |
| 738 | |
| 739 | entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | |
| 740 | off | (u32)uec_info->risc_tx; |
| 741 | p_init_enet_param->txthread[i] = entry_val; |
| 742 | } |
| 743 | |
| 744 | __asm__ __volatile__("sync"); |
| 745 | |
| 746 | /* Issue QE command */ |
| 747 | command = QE_INIT_TX_RX; |
| 748 | cecr_subblock = ucc_fast_get_qe_cr_subblock(uf_info->ucc_num); |
| 749 | qe_issue_cmd(command, cecr_subblock, (u8)QE_CR_PROTOCOL_ETHERNET, |
| 750 | init_enet_param_offset); |
| 751 | |
| 752 | return 0; |
| 753 | } |
| 754 | |
| 755 | static int uec_startup(struct udevice *dev) |
| 756 | { |
| 757 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 758 | struct uec_priv *uec = priv->uec; |
| 759 | struct uec_inf *uec_info; |
| 760 | struct ucc_fast_inf *uf_info; |
| 761 | struct ucc_fast_priv *uccf; |
| 762 | ucc_fast_t *uf_regs; |
| 763 | uec_t *uec_regs; |
| 764 | int num_threads_tx; |
| 765 | int num_threads_rx; |
| 766 | u32 utbipar; |
| 767 | u32 length; |
| 768 | u32 align; |
| 769 | struct buffer_descriptor *bd; |
| 770 | u8 *buf; |
| 771 | int i; |
| 772 | |
| 773 | uec_info = uec->uec_info; |
| 774 | uf_info = &uec_info->uf_info; |
| 775 | |
| 776 | /* Check if Rx BD ring len is illegal */ |
| 777 | if (uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN || |
| 778 | uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT) { |
| 779 | printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n", |
| 780 | __func__); |
| 781 | return -EINVAL; |
| 782 | } |
| 783 | |
| 784 | /* Check if Tx BD ring len is illegal */ |
| 785 | if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) { |
| 786 | printf("%s: Tx BD ring length must not be smaller than 2.\n", |
| 787 | __func__); |
| 788 | return -EINVAL; |
| 789 | } |
| 790 | |
| 791 | /* Check if MRBLR is illegal */ |
| 792 | if (MAX_RXBUF_LEN == 0 || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) { |
| 793 | printf("%s: max rx buffer length must be mutliple of 128.\n", |
| 794 | __func__); |
| 795 | return -EINVAL; |
| 796 | } |
| 797 | |
| 798 | /* Both Rx and Tx are stopped */ |
| 799 | uec->grace_stopped_rx = 1; |
| 800 | uec->grace_stopped_tx = 1; |
| 801 | |
| 802 | /* Init UCC fast */ |
| 803 | if (ucc_fast_init(uf_info, &uccf)) { |
| 804 | printf("%s: failed to init ucc fast\n", __func__); |
| 805 | return -ENOMEM; |
| 806 | } |
| 807 | |
| 808 | /* Save uccf */ |
| 809 | uec->uccf = uccf; |
| 810 | |
| 811 | /* Convert the Tx threads number */ |
| 812 | if (uec_convert_threads_num(uec_info->num_threads_tx, |
| 813 | &num_threads_tx)) |
| 814 | return -EINVAL; |
| 815 | |
| 816 | /* Convert the Rx threads number */ |
| 817 | if (uec_convert_threads_num(uec_info->num_threads_rx, |
| 818 | &num_threads_rx)) |
| 819 | return -EINVAL; |
| 820 | |
| 821 | uf_regs = uccf->uf_regs; |
| 822 | |
| 823 | /* UEC register is following UCC fast registers */ |
| 824 | uec_regs = (uec_t *)(&uf_regs->ucc_eth); |
| 825 | |
| 826 | /* Save the UEC register pointer to UEC private struct */ |
| 827 | uec->uec_regs = uec_regs; |
| 828 | |
| 829 | /* Init UPSMR, enable hardware statistics (UCC) */ |
| 830 | out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE); |
| 831 | |
| 832 | /* Init MACCFG1, flow control disable, disable Tx and Rx */ |
| 833 | out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE); |
| 834 | |
| 835 | /* Init MACCFG2, length check, MAC PAD and CRC enable */ |
| 836 | out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE); |
| 837 | |
| 838 | /* Setup UTBIPAR */ |
| 839 | utbipar = in_be32(&uec_regs->utbipar); |
| 840 | utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK; |
| 841 | |
| 842 | /* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC. |
| 843 | * This frees up the remaining SMI addresses for use. |
| 844 | */ |
| 845 | utbipar |= CONFIG_UTBIPAR_INIT_TBIPA << UTBIPAR_PHY_ADDRESS_SHIFT; |
| 846 | out_be32(&uec_regs->utbipar, utbipar); |
| 847 | |
| 848 | /* Allocate Tx BDs */ |
| 849 | length = ((uec_info->tx_bd_ring_len * SIZEOFBD) / |
| 850 | UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) * |
| 851 | UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; |
| 852 | if ((uec_info->tx_bd_ring_len * SIZEOFBD) % |
| 853 | UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) |
| 854 | length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; |
| 855 | |
| 856 | align = UEC_TX_BD_RING_ALIGNMENT; |
| 857 | uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align)); |
| 858 | if (uec->tx_bd_ring_offset != 0) |
| 859 | uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align) |
| 860 | & ~(align - 1)); |
| 861 | |
| 862 | /* Zero all of Tx BDs */ |
| 863 | memset((void *)(uec->tx_bd_ring_offset), 0, length + align); |
| 864 | |
| 865 | /* Allocate Rx BDs */ |
| 866 | length = uec_info->rx_bd_ring_len * SIZEOFBD; |
| 867 | align = UEC_RX_BD_RING_ALIGNMENT; |
| 868 | uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align))); |
| 869 | if (uec->rx_bd_ring_offset != 0) |
| 870 | uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align) |
| 871 | & ~(align - 1)); |
| 872 | |
| 873 | /* Zero all of Rx BDs */ |
| 874 | memset((void *)(uec->rx_bd_ring_offset), 0, length + align); |
| 875 | |
| 876 | /* Allocate Rx buffer */ |
| 877 | length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN; |
| 878 | align = UEC_RX_DATA_BUF_ALIGNMENT; |
| 879 | uec->rx_buf_offset = (u32)malloc(length + align); |
| 880 | if (uec->rx_buf_offset != 0) |
| 881 | uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align) |
| 882 | & ~(align - 1)); |
| 883 | |
| 884 | /* Zero all of the Rx buffer */ |
| 885 | memset((void *)(uec->rx_buf_offset), 0, length + align); |
| 886 | |
| 887 | /* Init TxBD ring */ |
| 888 | bd = (struct buffer_descriptor *)uec->p_tx_bd_ring; |
| 889 | uec->tx_bd = bd; |
| 890 | |
| 891 | for (i = 0; i < uec_info->tx_bd_ring_len; i++) { |
| 892 | BD_DATA_CLEAR(bd); |
| 893 | BD_STATUS_SET(bd, 0); |
| 894 | BD_LENGTH_SET(bd, 0); |
| 895 | bd++; |
| 896 | } |
| 897 | BD_STATUS_SET((--bd), TX_BD_WRAP); |
| 898 | |
| 899 | /* Init RxBD ring */ |
| 900 | bd = (struct buffer_descriptor *)uec->p_rx_bd_ring; |
| 901 | uec->rx_bd = bd; |
| 902 | buf = uec->p_rx_buf; |
| 903 | for (i = 0; i < uec_info->rx_bd_ring_len; i++) { |
| 904 | BD_DATA_SET(bd, buf); |
| 905 | BD_LENGTH_SET(bd, 0); |
| 906 | BD_STATUS_SET(bd, RX_BD_EMPTY); |
| 907 | buf += MAX_RXBUF_LEN; |
| 908 | bd++; |
| 909 | } |
| 910 | BD_STATUS_SET((--bd), RX_BD_WRAP | RX_BD_EMPTY); |
| 911 | |
| 912 | /* Init global Tx parameter RAM */ |
| 913 | uec_init_tx_parameter(uec, num_threads_tx); |
| 914 | |
| 915 | /* Init global Rx parameter RAM */ |
| 916 | uec_init_rx_parameter(uec, num_threads_rx); |
| 917 | |
| 918 | /* Init ethernet Tx and Rx parameter command */ |
| 919 | if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx, |
| 920 | num_threads_rx)) { |
| 921 | printf("%s issue init enet cmd failed\n", __func__); |
| 922 | return -ENOMEM; |
| 923 | } |
| 924 | return 0; |
| 925 | } |
| 926 | |
| 927 | /* Convert a string to a QE clock source enum |
| 928 | * |
| 929 | * This function takes a string, typically from a property in the device |
| 930 | * tree, and returns the corresponding "enum qe_clock" value. |
| 931 | */ |
| 932 | enum qe_clock qe_clock_source(const char *source) |
| 933 | { |
| 934 | unsigned int i; |
| 935 | |
| 936 | if (strcasecmp(source, "none") == 0) |
| 937 | return QE_CLK_NONE; |
| 938 | |
| 939 | if (strncasecmp(source, "brg", 3) == 0) { |
| 940 | i = simple_strtoul(source + 3, NULL, 10); |
| 941 | if (i >= 1 && i <= 16) |
| 942 | return (QE_BRG1 - 1) + i; |
| 943 | else |
| 944 | return QE_CLK_DUMMY; |
| 945 | } |
| 946 | |
| 947 | if (strncasecmp(source, "clk", 3) == 0) { |
| 948 | i = simple_strtoul(source + 3, NULL, 10); |
| 949 | if (i >= 1 && i <= 24) |
| 950 | return (QE_CLK1 - 1) + i; |
| 951 | else |
| 952 | return QE_CLK_DUMMY; |
| 953 | } |
| 954 | |
| 955 | return QE_CLK_DUMMY; |
| 956 | } |
| 957 | |
| 958 | static void qe_uec_set_eth_type(struct udevice *dev) |
| 959 | { |
| 960 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 961 | struct uec_priv *uec = priv->uec; |
| 962 | struct uec_inf *uec_info = uec->uec_info; |
| 963 | struct ucc_fast_inf *uf_info = &uec_info->uf_info; |
| 964 | |
| 965 | switch (uec_info->enet_interface_type) { |
| 966 | case PHY_INTERFACE_MODE_GMII: |
| 967 | case PHY_INTERFACE_MODE_RGMII: |
| 968 | case PHY_INTERFACE_MODE_RGMII_ID: |
| 969 | case PHY_INTERFACE_MODE_RGMII_RXID: |
| 970 | case PHY_INTERFACE_MODE_RGMII_TXID: |
| 971 | case PHY_INTERFACE_MODE_TBI: |
| 972 | case PHY_INTERFACE_MODE_RTBI: |
| 973 | case PHY_INTERFACE_MODE_SGMII: |
| 974 | uf_info->eth_type = GIGA_ETH; |
| 975 | break; |
| 976 | default: |
| 977 | uf_info->eth_type = FAST_ETH; |
| 978 | break; |
| 979 | } |
| 980 | } |
| 981 | |
| 982 | static int qe_uec_set_uec_info(struct udevice *dev) |
| 983 | { |
| 984 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 985 | struct eth_pdata *pdata = dev_get_platdata(dev); |
| 986 | struct uec_priv *uec = priv->uec; |
| 987 | struct uec_inf *uec_info; |
| 988 | struct ucc_fast_inf *uf_info; |
| 989 | const char *s; |
| 990 | int ret; |
| 991 | u32 val; |
| 992 | |
| 993 | uec_info = (struct uec_inf *)malloc(sizeof(struct uec_inf)); |
| 994 | if (!uec_info) |
| 995 | return -ENOMEM; |
| 996 | |
| 997 | uf_info = &uec_info->uf_info; |
| 998 | |
| 999 | ret = dev_read_u32(dev, "cell-index", &val); |
| 1000 | if (ret) { |
| 1001 | ret = dev_read_u32(dev, "device-id", &val); |
| 1002 | if (ret) { |
| 1003 | pr_err("no cell-index nor device-id found!"); |
| 1004 | goto out; |
| 1005 | } |
| 1006 | } |
| 1007 | |
| 1008 | uf_info->ucc_num = val - 1; |
| 1009 | if (uf_info->ucc_num < 0 || uf_info->ucc_num > 7) { |
| 1010 | ret = -ENODEV; |
| 1011 | goto out; |
| 1012 | } |
| 1013 | |
| 1014 | ret = dev_read_string_index(dev, "rx-clock-name", 0, &s); |
| 1015 | if (!ret) { |
| 1016 | uf_info->rx_clock = qe_clock_source(s); |
| 1017 | if (uf_info->rx_clock < QE_CLK_NONE || |
| 1018 | uf_info->rx_clock > QE_CLK24) { |
| 1019 | pr_err("invalid rx-clock-name property\n"); |
| 1020 | ret = -EINVAL; |
| 1021 | goto out; |
| 1022 | } |
| 1023 | } else { |
| 1024 | ret = dev_read_u32(dev, "rx-clock", &val); |
| 1025 | if (ret) { |
| 1026 | /* |
| 1027 | * If both rx-clock-name and rx-clock are missing, |
| 1028 | * we want to tell people to use rx-clock-name. |
| 1029 | */ |
| 1030 | pr_err("missing rx-clock-name property\n"); |
| 1031 | goto out; |
| 1032 | } |
| 1033 | if (val < QE_CLK_NONE || val > QE_CLK24) { |
| 1034 | pr_err("invalid rx-clock property\n"); |
| 1035 | ret = -EINVAL; |
| 1036 | goto out; |
| 1037 | } |
| 1038 | uf_info->rx_clock = val; |
| 1039 | } |
| 1040 | |
| 1041 | ret = dev_read_string_index(dev, "tx-clock-name", 0, &s); |
| 1042 | if (!ret) { |
| 1043 | uf_info->tx_clock = qe_clock_source(s); |
| 1044 | if (uf_info->tx_clock < QE_CLK_NONE || |
| 1045 | uf_info->tx_clock > QE_CLK24) { |
| 1046 | pr_err("invalid tx-clock-name property\n"); |
| 1047 | ret = -EINVAL; |
| 1048 | goto out; |
| 1049 | } |
| 1050 | } else { |
| 1051 | ret = dev_read_u32(dev, "tx-clock", &val); |
| 1052 | if (ret) { |
| 1053 | pr_err("missing tx-clock-name property\n"); |
| 1054 | goto out; |
| 1055 | } |
| 1056 | if (val < QE_CLK_NONE || val > QE_CLK24) { |
| 1057 | pr_err("invalid tx-clock property\n"); |
| 1058 | ret = -EINVAL; |
| 1059 | goto out; |
| 1060 | } |
| 1061 | uf_info->tx_clock = val; |
| 1062 | } |
| 1063 | |
| 1064 | uec_info->num_threads_tx = UEC_NUM_OF_THREADS_1; |
| 1065 | uec_info->num_threads_rx = UEC_NUM_OF_THREADS_1; |
| 1066 | uec_info->risc_tx = QE_RISC_ALLOCATION_RISC1_AND_RISC2; |
| 1067 | uec_info->risc_rx = QE_RISC_ALLOCATION_RISC1_AND_RISC2; |
| 1068 | uec_info->tx_bd_ring_len = 16; |
| 1069 | uec_info->rx_bd_ring_len = 16; |
| 1070 | #if (MAX_QE_RISC == 4) |
| 1071 | uec_info->risc_tx = QE_RISC_ALLOCATION_FOUR_RISCS; |
| 1072 | uec_info->risc_rx = QE_RISC_ALLOCATION_FOUR_RISCS; |
| 1073 | #endif |
| 1074 | |
| 1075 | uec_info->enet_interface_type = pdata->phy_interface; |
| 1076 | |
| 1077 | uec->uec_info = uec_info; |
| 1078 | qe_uec_set_eth_type(dev); |
| 1079 | |
| 1080 | return 0; |
| 1081 | out: |
| 1082 | free(uec_info); |
| 1083 | return ret; |
| 1084 | } |
| 1085 | |
| 1086 | static int qe_uec_probe(struct udevice *dev) |
| 1087 | { |
| 1088 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 1089 | struct eth_pdata *pdata = dev_get_platdata(dev); |
| 1090 | struct uec_priv *uec; |
| 1091 | int ret; |
| 1092 | |
| 1093 | /* Allocate the UEC private struct */ |
| 1094 | uec = (struct uec_priv *)malloc(sizeof(struct uec_priv)); |
| 1095 | if (!uec) |
| 1096 | return -ENOMEM; |
| 1097 | |
| 1098 | memset(uec, 0, sizeof(struct uec_priv)); |
| 1099 | priv->uec = uec; |
| 1100 | uec->uec_regs = (uec_t *)pdata->iobase; |
| 1101 | |
| 1102 | /* setup uec info struct */ |
| 1103 | ret = qe_uec_set_uec_info(dev); |
| 1104 | if (ret) { |
| 1105 | free(uec); |
| 1106 | return ret; |
| 1107 | } |
| 1108 | |
| 1109 | ret = uec_startup(dev); |
| 1110 | if (ret) { |
| 1111 | free(uec->uec_info); |
| 1112 | free(uec); |
| 1113 | return ret; |
| 1114 | } |
| 1115 | |
| 1116 | priv->phydev = dm_eth_phy_connect(dev); |
| 1117 | return 0; |
| 1118 | } |
| 1119 | |
| 1120 | /* |
| 1121 | * Remove the driver from an interface: |
| 1122 | * - free up allocated memory |
| 1123 | */ |
| 1124 | static int qe_uec_remove(struct udevice *dev) |
| 1125 | { |
| 1126 | struct qe_uec_priv *priv = dev_get_priv(dev); |
| 1127 | |
| 1128 | free(priv->uec); |
| 1129 | return 0; |
| 1130 | } |
| 1131 | |
| 1132 | static int qe_uec_ofdata_to_platdata(struct udevice *dev) |
| 1133 | { |
| 1134 | struct eth_pdata *pdata = dev_get_platdata(dev); |
| 1135 | const char *phy_mode; |
| 1136 | |
| 1137 | pdata->iobase = (phys_addr_t)devfdt_get_addr(dev); |
| 1138 | |
| 1139 | pdata->phy_interface = -1; |
| 1140 | phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), |
| 1141 | "phy-connection-type", NULL); |
| 1142 | if (phy_mode) |
| 1143 | pdata->phy_interface = phy_get_interface_by_name(phy_mode); |
| 1144 | if (pdata->phy_interface == -1) { |
| 1145 | debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode); |
| 1146 | return -EINVAL; |
| 1147 | } |
| 1148 | |
| 1149 | return 0; |
| 1150 | } |
| 1151 | |
| 1152 | static const struct udevice_id qe_uec_ids[] = { |
| 1153 | { .compatible = QE_UEC_DRIVER_NAME }, |
| 1154 | { } |
| 1155 | }; |
| 1156 | |
| 1157 | U_BOOT_DRIVER(eth_qe_uec) = { |
| 1158 | .name = QE_UEC_DRIVER_NAME, |
| 1159 | .id = UCLASS_ETH, |
| 1160 | .of_match = qe_uec_ids, |
| 1161 | .ofdata_to_platdata = qe_uec_ofdata_to_platdata, |
| 1162 | .probe = qe_uec_probe, |
| 1163 | .remove = qe_uec_remove, |
| 1164 | .ops = &qe_uec_eth_ops, |
| 1165 | .priv_auto_alloc_size = sizeof(struct qe_uec_priv), |
| 1166 | .platdata_auto_alloc_size = sizeof(struct eth_pdata), |
| 1167 | }; |