Jit Loon Lim | 977071e | 2024-03-12 22:01:03 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2024 Intel Corporation <www.intel.com> |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | #include <dt-bindings/reset/altr,rst-mgr-agx5.h> |
| 8 | #include <dt-bindings/gpio/gpio.h> |
| 9 | #include <dt-bindings/clock/agilex5-clock.h> |
| 10 | |
| 11 | / { |
| 12 | compatible = "intel,socfpga-agilex"; |
| 13 | #address-cells = <2>; |
| 14 | #size-cells = <2>; |
| 15 | |
| 16 | reserved-memory { |
| 17 | #address-cells = <2>; |
| 18 | #size-cells = <2>; |
| 19 | ranges; |
| 20 | |
| 21 | service_reserved: svcbuffer@0 { |
| 22 | compatible = "shared-dma-pool"; |
| 23 | reg = <0x0 0x0 0x0 0x1000000>; |
| 24 | alignment = <0x1000>; |
| 25 | no-map; |
| 26 | }; |
| 27 | }; |
| 28 | |
| 29 | cpus { |
| 30 | #address-cells = <1>; |
| 31 | #size-cells = <0>; |
| 32 | |
| 33 | cpu0: cpu@0 { |
| 34 | compatible = "arm,cortex-a55"; |
| 35 | device_type = "cpu"; |
| 36 | enable-method = "psci"; |
| 37 | reg = <0x0>; |
| 38 | }; |
| 39 | |
| 40 | cpu1: cpu@1 { |
| 41 | compatible = "arm,cortex-a55"; |
| 42 | device_type = "cpu"; |
| 43 | enable-method = "psci"; |
| 44 | reg = <0x1>; |
| 45 | }; |
| 46 | |
| 47 | cpu2: cpu@2 { |
| 48 | compatible = "arm,cortex-a76"; |
| 49 | device_type = "cpu"; |
| 50 | enable-method = "psci"; |
| 51 | reg = <0x2>; |
| 52 | }; |
| 53 | |
| 54 | cpu3: cpu@3 { |
| 55 | compatible = "arm,cortex-a76"; |
| 56 | device_type = "cpu"; |
| 57 | enable-method = "psci"; |
| 58 | reg = <0x3>; |
| 59 | }; |
| 60 | }; |
| 61 | |
| 62 | pmu { |
| 63 | compatible = "arm,armv8-pmuv3"; |
| 64 | interrupts = <0 170 4>, |
| 65 | <0 171 4>, |
| 66 | <0 172 4>, |
| 67 | <0 173 4>; |
| 68 | interrupt-affinity = <&cpu0>, |
| 69 | <&cpu1>, |
| 70 | <&cpu2>, |
| 71 | <&cpu3>; |
| 72 | interrupt-parent = <&intc>; |
| 73 | }; |
| 74 | |
| 75 | psci { |
| 76 | compatible = "arm,psci-0.2"; |
| 77 | method = "smc"; |
| 78 | }; |
| 79 | |
| 80 | intc: intc@fffc1000 { |
| 81 | compatible = "arm,gic-400", "arm,cortex-a15-gic"; |
| 82 | #interrupt-cells = <3>; |
| 83 | interrupt-controller; |
| 84 | reg = <0x0 0x1d000000 0x0 0x10000>; |
| 85 | }; |
| 86 | |
| 87 | soc { |
| 88 | #address-cells = <1>; |
| 89 | #size-cells = <1>; |
| 90 | compatible = "simple-bus"; |
| 91 | device_type = "soc"; |
| 92 | interrupt-parent = <&intc>; |
| 93 | ranges = <0 0 0 0xffffffff>; |
| 94 | |
| 95 | base_fpga_region { |
| 96 | #address-cells = <0x1>; |
| 97 | #size-cells = <0x1>; |
| 98 | compatible = "fpga-region"; |
| 99 | fpga-mgr = <&fpga_mgr>; |
| 100 | }; |
| 101 | |
| 102 | clkmgr: clock-controller@10d10000 { |
| 103 | compatible = "intel,agilex5-clkmgr"; |
| 104 | reg = <0x10d10000 0x1000>; |
| 105 | #clock-cells = <1>; |
| 106 | }; |
| 107 | |
| 108 | clocks { |
| 109 | cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { |
| 110 | #clock-cells = <0>; |
| 111 | compatible = "fixed-clock"; |
| 112 | }; |
| 113 | |
| 114 | cb_intosc_ls_clk: cb-intosc-ls-clk { |
| 115 | #clock-cells = <0>; |
| 116 | compatible = "fixed-clock"; |
| 117 | }; |
| 118 | |
| 119 | f2s_free_clk: f2s-free-clk { |
| 120 | #clock-cells = <0>; |
| 121 | compatible = "fixed-clock"; |
| 122 | }; |
| 123 | |
| 124 | osc1: osc1 { |
| 125 | #clock-cells = <0>; |
| 126 | compatible = "fixed-clock"; |
| 127 | }; |
| 128 | |
| 129 | qspi_clk: qspi-clk { |
| 130 | #clock-cells = <0>; |
| 131 | compatible = "fixed-clock"; |
| 132 | clock-frequency = <200000000>; |
| 133 | }; |
| 134 | }; |
| 135 | gmac0: ethernet@10810000 { |
| 136 | compatible = "intel,socfpga-dwxgmac", "snps,dwxgmac-2.10", "snps,dwxgmac"; |
| 137 | reg = <0x10810000 0x3500>; |
| 138 | interrupts = <0 190 4>; |
| 139 | interrupt-names = "macirq"; |
| 140 | mac-address = [00 00 00 00 00 00]; |
| 141 | resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; |
| 142 | reset-names = "stmmaceth", "stmmaceth-ocp"; |
| 143 | tx-fifo-depth = <32768>; |
| 144 | rx-fifo-depth = <16384>; |
| 145 | iommus = <&smmu 1>; |
| 146 | altr,sysmgr-syscon = <&sysmgr 0x44 0>; |
| 147 | clocks = <&clkmgr AGILEX5_EMAC0_CLK>; |
| 148 | clock-names = "stmmaceth"; |
| 149 | status = "disabled"; |
| 150 | }; |
| 151 | |
| 152 | gmac1: ethernet@10820000 { |
| 153 | compatible = "intel,socfpga-dwxgmac", "snps,dwxgmac-2.10", "snps,dwxgmac"; |
| 154 | reg = <0x10820000 0x3500>; |
| 155 | interrupts = <0 207 4>; |
| 156 | interrupt-names = "macirq"; |
| 157 | mac-address = [00 00 00 00 00 00]; |
| 158 | resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; |
| 159 | reset-names = "stmmaceth", "stmmaceth-ocp"; |
| 160 | tx-fifo-depth = <32768>; |
| 161 | rx-fifo-depth = <16384>; |
| 162 | iommus = <&smmu 2>; |
| 163 | altr,sysmgr-syscon = <&sysmgr 0x48 0>; |
| 164 | clocks = <&clkmgr AGILEX5_EMAC1_CLK>; |
| 165 | clock-names = "stmmaceth"; |
| 166 | status = "disabled"; |
| 167 | }; |
| 168 | |
| 169 | gmac2: ethernet@10830000 { |
| 170 | compatible = "intel,socfpga-dwxgmac", "snps,dwxgmac-2.10", "snps,dwxgmac"; |
| 171 | reg = <0x10830000 0x3500>; |
| 172 | interrupts = <0 224 4>; |
| 173 | interrupt-names = "macirq"; |
| 174 | mac-address = [00 00 00 00 00 00]; |
| 175 | resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; |
| 176 | reset-names = "stmmaceth", "stmmaceth-ocp"; |
| 177 | tx-fifo-depth = <32768>; |
| 178 | rx-fifo-depth = <16384>; |
| 179 | iommus = <&smmu 3>; |
| 180 | altr,sysmgr-syscon = <&sysmgr 0x4c 0>; |
| 181 | clocks = <&clkmgr AGILEX5_EMAC2_CLK>; |
| 182 | clock-names = "stmmaceth"; |
| 183 | status = "disabled"; |
| 184 | }; |
| 185 | |
| 186 | gpio0: gpio@10c03200 { |
| 187 | #address-cells = <1>; |
| 188 | #size-cells = <0>; |
| 189 | compatible = "snps,dw-apb-gpio"; |
| 190 | reg = <0x10c03200 0x80>; |
| 191 | resets = <&rst GPIO0_RESET>; |
| 192 | status = "disabled"; |
| 193 | |
| 194 | porta: gpio-controller@0 { |
| 195 | compatible = "snps,dw-apb-gpio-port"; |
| 196 | gpio-controller; |
| 197 | #gpio-cells = <2>; |
| 198 | snps,nr-gpios = <24>; |
| 199 | reg = <0>; |
| 200 | interrupt-controller; |
| 201 | #interrupt-cells = <2>; |
| 202 | interrupts = <0 110 4>; |
| 203 | }; |
| 204 | }; |
| 205 | |
| 206 | gpio1: gpio@10c03300 { |
| 207 | #address-cells = <1>; |
| 208 | #size-cells = <0>; |
| 209 | compatible = "snps,dw-apb-gpio"; |
| 210 | reg = <0x10c03300 0x80>; |
| 211 | resets = <&rst GPIO1_RESET>; |
| 212 | status = "disabled"; |
| 213 | |
| 214 | portb: gpio-controller@0 { |
| 215 | compatible = "snps,dw-apb-gpio-port"; |
| 216 | gpio-controller; |
| 217 | #gpio-cells = <2>; |
| 218 | snps,nr-gpios = <24>; |
| 219 | reg = <0>; |
| 220 | interrupt-controller; |
| 221 | #interrupt-cells = <2>; |
| 222 | interrupts = <0 111 4>; |
| 223 | }; |
| 224 | }; |
| 225 | |
| 226 | i2c0: i2c@10c02800 { |
| 227 | #address-cells = <1>; |
| 228 | #size-cells = <0>; |
| 229 | compatible = "snps,designware-i2c"; |
| 230 | reg = <0x10c02800 0x100>; |
| 231 | interrupts = <0 103 4>; |
| 232 | resets = <&rst I2C0_RESET>; |
| 233 | clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| 234 | status = "disabled"; |
| 235 | }; |
| 236 | |
| 237 | i2c1: i2c@10c02900 { |
| 238 | #address-cells = <1>; |
| 239 | #size-cells = <0>; |
| 240 | compatible = "snps,designware-i2c"; |
| 241 | reg = <0x10c02900 0x100>; |
| 242 | interrupts = <0 104 4>; |
| 243 | resets = <&rst I2C1_RESET>; |
| 244 | clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| 245 | status = "disabled"; |
| 246 | }; |
| 247 | |
| 248 | i2c2: i2c@10c02a00 { |
| 249 | #address-cells = <1>; |
| 250 | #size-cells = <0>; |
| 251 | compatible = "snps,designware-i2c"; |
| 252 | reg = <0x10c02a00 0x100>; |
| 253 | interrupts = <0 105 4>; |
| 254 | resets = <&rst I2C2_RESET>; |
| 255 | clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| 256 | status = "disabled"; |
| 257 | }; |
| 258 | |
| 259 | i2c3: i2c@10c02b00 { |
| 260 | #address-cells = <1>; |
| 261 | #size-cells = <0>; |
| 262 | compatible = "snps,designware-i2c"; |
| 263 | reg = <0x10c02b00 0x100>; |
| 264 | interrupts = <0 106 4>; |
| 265 | resets = <&rst I2C3_RESET>; |
| 266 | clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| 267 | status = "disabled"; |
| 268 | }; |
| 269 | |
| 270 | i2c4: i2c@10c02c00 { |
| 271 | #address-cells = <1>; |
| 272 | #size-cells = <0>; |
| 273 | compatible = "snps,designware-i2c"; |
| 274 | reg = <0x10c02c00 0x100>; |
| 275 | interrupts = <0 107 4>; |
| 276 | resets = <&rst I2C4_RESET>; |
| 277 | clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| 278 | status = "disabled"; |
| 279 | }; |
| 280 | |
| 281 | i3c0: i3c@10da0000 { |
| 282 | compatible = "snps,dw-i3c-master-1.00a"; |
| 283 | reg = <0x10da0000 0x1000>; |
| 284 | #address-cells = <1>; |
| 285 | #size-cells = <0>; |
| 286 | interrupts = <0 164 4>; |
| 287 | resets = <&rst I3C0_RESET>; |
| 288 | max_devices = <11>; |
| 289 | clocks = <&clkmgr AGILEX5_L4_MP_CLK>; |
| 290 | status = "disabled"; |
| 291 | }; |
| 292 | |
| 293 | i3c1: i3c@10da1000 { |
| 294 | compatible = "snps,dw-i3c-master-1.00a"; |
| 295 | reg = <0x10da1000 0x1000>; |
| 296 | #address-cells = <1>; |
| 297 | #size-cells = <0>; |
| 298 | interrupts = <0 165 4>; |
| 299 | resets = <&rst I3C1_RESET>; |
| 300 | clocks = <&clkmgr AGILEX5_L4_MP_CLK>; |
| 301 | max_devices = <11>; |
| 302 | status = "disabled"; |
| 303 | }; |
| 304 | |
| 305 | combophy0: combophy@0 { |
| 306 | #phy-cells = <0>; |
| 307 | phy-type = <1>; |
| 308 | compatible = "cdns,combophy"; |
| 309 | reg = <0x10808000 0x1000>; |
| 310 | resets = <&rst COMBOPHY_RESET>; |
| 311 | reset-names = "reset"; |
| 312 | status = "disabled"; |
| 313 | }; |
| 314 | |
| 315 | mmc: mmc0@10808000 { |
| 316 | #address-cells = <1>; |
| 317 | #size-cells = <0>; |
| 318 | compatible = "cdns,sd4hc"; |
| 319 | reg = <0x10808000 0x1000>; |
| 320 | interrupts = <0 96 4>; |
| 321 | phys = <&combophy0>; |
| 322 | phy-names = "combo-phy"; |
| 323 | clocks = <&clkmgr AGILEX5_L4_MP_CLK>, |
| 324 | <&clkmgr AGILEX5_SDMMC_CLK>; |
| 325 | clock-names = "biu", "ciu"; |
| 326 | fifo-depth = <0x800>; |
| 327 | resets = <&rst SDMMC_RESET>; |
| 328 | reset-names = "reset"; |
| 329 | iommus = <&smmu 5>; |
| 330 | status = "disabled"; |
| 331 | }; |
| 332 | |
| 333 | ocram: sram@00000000 { |
| 334 | compatible = "mmio-sram"; |
| 335 | reg = <0x00000000 0x200000>; |
| 336 | }; |
| 337 | |
| 338 | rst: rstmgr@10d11000 { |
| 339 | #reset-cells = <1>; |
| 340 | compatible = "altr,stratix10-rst-mgr"; |
| 341 | reg = <0x10d11000 0x1000>; |
| 342 | }; |
| 343 | |
| 344 | smmu: iommu@16000000 { |
| 345 | compatible = "arm,mmu-500", "arm,smmu-v2"; |
| 346 | reg = <0x16000000 0x40000>; |
| 347 | #global-interrupts = <2>; |
| 348 | #iommu-cells = <1>; |
| 349 | interrupt-parent = <&intc>; |
| 350 | interrupts = <0 128 4>, /* Global Secure Fault */ |
| 351 | <0 129 4>, /* Global Non-secure Fault */ |
| 352 | /* Non-secure Context Interrupts (32) */ |
| 353 | <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>, |
| 354 | <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>, |
| 355 | <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>, |
| 356 | <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>, |
| 357 | <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>, |
| 358 | <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>, |
| 359 | <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, |
| 360 | <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; |
| 361 | stream-match-mask = <0x7ff0>; |
| 362 | status = "disabled"; |
| 363 | }; |
| 364 | |
| 365 | spi0: spi@10da4000 { |
| 366 | compatible = "intel,agilex-spi", |
| 367 | "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi"; |
| 368 | #address-cells = <1>; |
| 369 | #size-cells = <0>; |
| 370 | reg = <0x10da4000 0x1000>; |
| 371 | interrupts = <0 99 4>; |
| 372 | resets = <&rst SPIM0_RESET>; |
| 373 | reg-io-width = <4>; |
| 374 | num-cs = <4>; |
| 375 | clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>; |
| 376 | status = "disabled"; |
| 377 | }; |
| 378 | |
| 379 | spi1: spi@10da5000 { |
| 380 | compatible = "intel,agilex-spi", |
| 381 | "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi"; |
| 382 | #address-cells = <1>; |
| 383 | #size-cells = <0>; |
| 384 | reg = <0x10da5000 0x1000>; |
| 385 | interrupts = <0 100 4>; |
| 386 | resets = <&rst SPIM1_RESET>; |
| 387 | reg-io-width = <4>; |
| 388 | num-cs = <4>; |
| 389 | clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>; |
| 390 | status = "disabled"; |
| 391 | }; |
| 392 | |
| 393 | sysmgr: sysmgr@10d12000 { |
| 394 | compatible = "altr,sys-mgr-s10","altr,sys-mgr"; |
| 395 | reg = <0x10d12000 0x500>; |
| 396 | }; |
| 397 | |
| 398 | /* Local timer */ |
| 399 | timer { |
| 400 | compatible = "arm,armv8-timer"; |
| 401 | interrupts = <1 13 0xf08>, |
| 402 | <1 14 0xf08>, |
| 403 | <1 11 0xf08>, |
| 404 | <1 10 0xf08>; |
| 405 | }; |
| 406 | |
| 407 | timer0: timer0@10c03000 { |
| 408 | compatible = "snps,dw-apb-timer"; |
| 409 | interrupts = <0 113 4>; |
| 410 | reg = <0x10c03000 0x100>; |
| 411 | resets = <&rst SPTIMER0_RESET>; |
| 412 | clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| 413 | clock-names = "timer"; |
| 414 | status = "disabled"; |
| 415 | }; |
| 416 | |
| 417 | timer1: timer1@10c03100 { |
| 418 | compatible = "snps,dw-apb-timer"; |
| 419 | interrupts = <0 114 4>; |
| 420 | reg = <0x10c03100 0x100>; |
| 421 | resets = <&rst SPTIMER1_RESET>; |
| 422 | clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| 423 | clock-names = "timer"; |
| 424 | status = "disabled"; |
| 425 | }; |
| 426 | |
| 427 | timer2: timer2@10d00000 { |
| 428 | compatible = "snps,dw-apb-timer"; |
| 429 | interrupts = <0 115 4>; |
| 430 | reg = <0x10d00000 0x100>; |
| 431 | resets = <&rst L4SYSTIMER0_RESET>; |
| 432 | clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| 433 | clock-names = "timer"; |
| 434 | status = "disabled"; |
| 435 | }; |
| 436 | |
| 437 | timer3: timer3@10d00100 { |
| 438 | compatible = "snps,dw-apb-timer"; |
| 439 | interrupts = <0 116 4>; |
| 440 | reg = <0x10d00100 0x100>; |
| 441 | resets = <&rst L4SYSTIMER1_RESET>; |
| 442 | clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| 443 | clock-names = "timer"; |
| 444 | status = "disabled"; |
| 445 | }; |
| 446 | |
| 447 | uart0: serial0@10c02000 { |
| 448 | compatible = "snps,dw-apb-uart"; |
| 449 | reg = <0x10c02000 0x100>; |
| 450 | interrupts = <0 108 4>; |
| 451 | reg-shift = <2>; |
| 452 | reg-io-width = <4>; |
| 453 | resets = <&rst UART0_RESET>; |
| 454 | status = "disabled"; |
| 455 | clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| 456 | clock-frequency = <100000000>; |
| 457 | }; |
| 458 | |
| 459 | uart1: serial1@10c02100 { |
| 460 | compatible = "snps,dw-apb-uart"; |
| 461 | reg = <0x10c02100 0x100>; |
| 462 | interrupts = <0 109 4>; |
| 463 | reg-shift = <2>; |
| 464 | reg-io-width = <4>; |
| 465 | resets = <&rst UART1_RESET>; |
| 466 | clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| 467 | status = "disabled"; |
| 468 | }; |
| 469 | |
| 470 | usbphy0: usbphy@0 { |
| 471 | #phy-cells = <0>; |
| 472 | compatible = "usb-nop-xceiv"; |
| 473 | clocks = <&clkmgr AGILEX5_USB_CLK>; |
| 474 | status = "disabled"; |
| 475 | }; |
| 476 | |
| 477 | usb0: usb@10b00000 { |
| 478 | compatible = "snps,dwc2"; |
| 479 | reg = <0x10b00000 0x40000>; |
| 480 | interrupts = <0 93 4>; |
| 481 | phys = <&usbphy0>; |
| 482 | phy-names = "usb2-phy"; |
| 483 | resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; |
| 484 | reset-names = "dwc2", "dwc2-ecc"; |
| 485 | clocks = <&clkmgr AGILEX5_USB_CLK>; |
| 486 | iommus = <&smmu 6>; |
| 487 | status = "disabled"; |
| 488 | }; |
| 489 | |
| 490 | usb31: usb31@11000000 { |
| 491 | compatible = "snps,dwc3"; |
| 492 | reg = <0x11000000 0x100000>; |
| 493 | resets = <&rst USB1_RESET>; |
| 494 | phys = <&usbphy0>, <&usbphy0>; |
| 495 | phy-names = "usb2-phy", "usb3-phy"; |
| 496 | dr_mode = "host"; |
| 497 | maximum-speed = "super-speed"; |
| 498 | snps,dis_u2_susphy_quirk; |
| 499 | status = "disabled"; |
| 500 | }; |
| 501 | |
| 502 | watchdog0: watchdog@10d00200 { |
| 503 | compatible = "snps,dw-wdt"; |
| 504 | reg = <0x10d00200 0x100>; |
| 505 | interrupts = <0 117 4>; |
| 506 | resets = <&rst WATCHDOG0_RESET>; |
| 507 | clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| 508 | status = "disabled"; |
| 509 | }; |
| 510 | |
| 511 | watchdog1: watchdog@10d00300 { |
| 512 | compatible = "snps,dw-wdt"; |
| 513 | reg = <0x10d00300 0x100>; |
| 514 | interrupts = <0 118 4>; |
| 515 | resets = <&rst WATCHDOG1_RESET>; |
| 516 | clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| 517 | status = "disabled"; |
| 518 | }; |
| 519 | |
| 520 | watchdog2: watchdog@10d00400 { |
| 521 | compatible = "snps,dw-wdt"; |
| 522 | reg = <0x10d00400 0x100>; |
| 523 | interrupts = <0 125 4>; |
| 524 | resets = <&rst WATCHDOG2_RESET>; |
| 525 | clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| 526 | status = "disabled"; |
| 527 | }; |
| 528 | |
| 529 | watchdog3: watchdog@10d00500 { |
| 530 | compatible = "snps,dw-wdt"; |
| 531 | reg = <0x10d00500 0x100>; |
| 532 | interrupts = <0 126 4>; |
| 533 | resets = <&rst WATCHDOG3_RESET>; |
| 534 | clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| 535 | status = "disabled"; |
| 536 | }; |
| 537 | |
| 538 | watchdog4: watchdog@10d00600 { |
| 539 | compatible = "snps,dw-wdt"; |
| 540 | reg = <0x10d00600 0x100>; |
| 541 | interrupts = <0 175 4>; |
| 542 | resets = <&rst WATCHDOG4_RESET>; |
| 543 | clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| 544 | status = "disabled"; |
| 545 | }; |
| 546 | |
| 547 | /* QSPI address not available yet */ |
| 548 | qspi: spi@108d2000 { |
| 549 | compatible = "cdns,qspi-nor"; |
| 550 | #address-cells = <1>; |
| 551 | #size-cells = <0>; |
| 552 | reg = <0x108d2000 0x100>, |
| 553 | <0x10900000 0x100000>; |
| 554 | interrupts = <0 3 4>; |
| 555 | cdns,fifo-depth = <128>; |
| 556 | cdns,fifo-width = <4>; |
| 557 | cdns,trigger-address = <0x00000000>; |
| 558 | clocks = <&qspi_clk>; |
| 559 | |
| 560 | status = "disabled"; |
| 561 | }; |
| 562 | |
| 563 | firmware { |
| 564 | svc { |
| 565 | compatible = "intel,stratix10-svc"; |
| 566 | method = "smc"; |
| 567 | memory-region = <&service_reserved>; |
| 568 | |
| 569 | fpga_mgr: fpga-mgr { |
| 570 | compatible = "intel,stratix10-soc-fpga-mgr"; |
| 571 | }; |
| 572 | }; |
| 573 | }; |
| 574 | }; |
| 575 | }; |