Chin Liang See | 967b4df | 2013-09-11 11:26:10 -0500 | [diff] [blame^] | 1 | /* This file is generated by Preloader Generator */ |
| 2 | |
| 3 | #ifndef _PRELOADER_PINMUX_CONFIG_H_ |
| 4 | #define _PRELOADER_PINMUX_CONFIG_H_ |
| 5 | |
| 6 | /* |
| 7 | * State of enabling for which IP connected out through the muxing. |
| 8 | * Value 1 mean the IP connection is muxed out |
| 9 | */ |
| 10 | #define CONFIG_HPS_EMAC0 (0) |
| 11 | #define CONFIG_HPS_EMAC1 (1) |
| 12 | #define CONFIG_HPS_USB0 (0) |
| 13 | #define CONFIG_HPS_USB1 (1) |
| 14 | #define CONFIG_HPS_NAND (0) |
| 15 | #define CONFIG_HPS_SDMMC (1) |
| 16 | #define CONFIG_HPS_QSPI (1) |
| 17 | #define CONFIG_HPS_UART0 (1) |
| 18 | #define CONFIG_HPS_UART1 (0) |
| 19 | #define CONFIG_HPS_TRACE (1) |
| 20 | #define CONFIG_HPS_I2C0 (1) |
| 21 | #define CONFIG_HPS_I2C1 (0) |
| 22 | #define CONFIG_HPS_I2C2 (0) |
| 23 | #define CONFIG_HPS_I2C3 (0) |
| 24 | #define CONFIG_HPS_SPIM0 (1) |
| 25 | #define CONFIG_HPS_SPIM1 (0) |
| 26 | #define CONFIG_HPS_SPIS0 (0) |
| 27 | #define CONFIG_HPS_SPIS1 (0) |
| 28 | #define CONFIG_HPS_CAN0 (1) |
| 29 | #define CONFIG_HPS_CAN1 (0) |
| 30 | |
| 31 | /* IP attribute value (which affected by pin muxing configuration) */ |
| 32 | #define CONFIG_HPS_SDMMC_BUSWIDTH (4) |
| 33 | |
| 34 | /* 1 if the pins are connected out */ |
| 35 | #define CONFIG_HPS_QSPI_CS0 (1) |
| 36 | #define CONFIG_HPS_QSPI_CS1 (0) |
| 37 | #define CONFIG_HPS_QSPI_CS2 (0) |
| 38 | #define CONFIG_HPS_QSPI_CS3 (0) |
| 39 | |
| 40 | /* UART */ |
| 41 | /* 1 means the pin is mux out or available */ |
| 42 | #define CONFIG_HPS_UART0_TX (1) |
| 43 | #define CONFIG_HPS_UART0_RX (1) |
| 44 | #define CONFIG_HPS_UART0_CTS (0) |
| 45 | #define CONFIG_HPS_UART0_RTS (0) |
| 46 | #define CONFIG_HPS_UART1_TX (0) |
| 47 | #define CONFIG_HPS_UART1_RX (0) |
| 48 | #define CONFIG_HPS_UART1_CTS (0) |
| 49 | #define CONFIG_HPS_UART1_RTS (0) |
| 50 | |
| 51 | /* Pin mux data */ |
| 52 | #define CONFIG_HPS_PINMUX_NUM (207) |
| 53 | |
| 54 | #endif /* _PRELOADER_PINMUX_CONFIG_H_ */ |