Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 94ef0166f2cd373ee29a9bb11cb8150561750139 / . / dts / upstream / src / arm64 / qcom / sm8650-mtp.dts
blob: 4450273f96671b53896c48c26b19fc06c648beb6 [file] [log] [blame]
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2023, Linaro Limited
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9#include "sm8650.dtsi"
10#include "pm8010.dtsi"
11#include "pm8550.dtsi"
12#include "pm8550b.dtsi"
13#define PMK8550VE_SID 8
14#include "pm8550ve.dtsi"
15#include "pm8550vs.dtsi"
16#include "pmk8550.dtsi"
17#include "pmr735d_a.dtsi"
18
19/ {
20 model = "Qualcomm Technologies, Inc. SM8650 MTP";
21 compatible = "qcom,sm8650-mtp", "qcom,sm8650";
22
23 aliases {
24 serial0 = &uart15;
25 };
26
27 chosen {
28 stdout-path = "serial0:115200n8";
29 };
30
31 pmic-glink {
32 compatible = "qcom,sm8650-pmic-glink",
33 "qcom,sm8550-pmic-glink",
34 "qcom,pmic-glink";
35 #address-cells = <1>;
36 #size-cells = <0>;
37 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
38
39 connector@0 {
40 compatible = "usb-c-connector";
41 reg = <0>;
42
43 power-role = "dual";
44 data-role = "dual";
45
46 ports {
47 #address-cells = <1>;
48 #size-cells = <0>;
49
50 port@0 {
51 reg = <0>;
52
53 pmic_glink_hs_in: endpoint {
54 remote-endpoint = <&usb_1_dwc3_hs>;
55 };
56 };
57
58 port@1 {
59 reg = <1>;
60
61 pmic_glink_ss_in: endpoint {
62 remote-endpoint = <&usb_1_dwc3_ss>;
63 };
64 };
65 };
66 };
67 };
68
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]69 sound {
70 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
71 model = "SM8650-MTP";
72 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
73 "SpkrRight IN", "WSA_SPK2 OUT";
74
75 wsa-dai-link {
76 link-name = "WSA Playback";
77
78 cpu {
79 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
80 };
81
82 codec {
83 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
84 };
85
86 platform {
87 sound-dai = <&q6apm>;
88 };
89 };
90 };
91
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]92 vph_pwr: vph-pwr-regulator {
93 compatible = "regulator-fixed";
94
95 regulator-name = "vph_pwr";
96 regulator-min-microvolt = <3700000>;
97 regulator-max-microvolt = <3700000>;
98
99 regulator-always-on;
100 regulator-boot-on;
101 };
102};
103
104&apps_rsc {
105 regulators-0 {
106 compatible = "qcom,pm8550-rpmh-regulators";
107
108 vdd-bob1-supply = <&vph_pwr>;
109 vdd-bob2-supply = <&vph_pwr>;
110 vdd-l2-l13-l14-supply = <&vreg_bob1>;
111 vdd-l3-supply = <&vreg_s1c_1p2>;
112 vdd-l5-l16-supply = <&vreg_bob1>;
113 vdd-l6-l7-supply = <&vreg_bob1>;
114 vdd-l8-l9-supply = <&vreg_bob1>;
115 vdd-l11-supply = <&vreg_s1c_1p2>;
116 vdd-l12-supply = <&vreg_s6c_1p8>;
117 vdd-l15-supply = <&vreg_s6c_1p8>;
118 vdd-l17-supply = <&vreg_bob2>;
119
120 qcom,pmic-id = "b";
121
122 vreg_bob1: bob1 {
123 regulator-name = "vreg_bob1";
124 regulator-min-microvolt = <3296000>;
125 regulator-max-microvolt = <3960000>;
126 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
127 };
128
129 vreg_bob2: bob2 {
130 regulator-name = "vreg_bob2";
131 regulator-min-microvolt = <2720000>;
132 regulator-max-microvolt = <3008000>;
133 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
134 };
135
136 vreg_l2b_3p0: ldo2 {
137 regulator-name = "vreg_l2b_3p0";
138 regulator-min-microvolt = <3008000>;
139 regulator-max-microvolt = <3008000>;
140 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
141 regulator-allow-set-load;
142 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
143 RPMH_REGULATOR_MODE_HPM>;
144 };
145
146 vreg_l5b_3p1: ldo5 {
147 regulator-name = "vreg_l5b_3p1";
148 regulator-min-microvolt = <3104000>;
149 regulator-max-microvolt = <3104000>;
150 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
151 regulator-allow-set-load;
152 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
153 RPMH_REGULATOR_MODE_HPM>;
154 };
155
156 vreg_l6b_1p8: ldo6 {
157 regulator-name = "vreg_l6b_1p8";
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <3008000>;
160 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
161 regulator-allow-set-load;
162 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
163 RPMH_REGULATOR_MODE_HPM>;
164 };
165
166 vreg_l7b_1p8: ldo7 {
167 regulator-name = "vreg_l7b_1p8";
168 regulator-min-microvolt = <1800000>;
169 regulator-max-microvolt = <3008000>;
170 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
171 };
172
173 vreg_l8b_1p8: ldo8 {
174 regulator-name = "vreg_l8b_1p8";
175 regulator-min-microvolt = <1800000>;
176 regulator-max-microvolt = <3008000>;
177 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
178 regulator-allow-set-load;
179 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
180 RPMH_REGULATOR_MODE_HPM>;
181 };
182
183 vreg_l9b_2p9: ldo9 {
184 regulator-name = "vreg_l9b_2p9";
185 regulator-min-microvolt = <2960000>;
186 regulator-max-microvolt = <3008000>;
187 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188 regulator-allow-set-load;
189 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
190 RPMH_REGULATOR_MODE_HPM>;
191 };
192
193 vreg_l11b_1p2: ldo11 {
194 regulator-name = "vreg_l11b_1p2";
195 regulator-min-microvolt = <1200000>;
196 regulator-max-microvolt = <1504000>;
197 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
198 regulator-allow-set-load;
199 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
200 RPMH_REGULATOR_MODE_HPM>;
201 };
202
203 vreg_l12b_1p8: ldo12 {
204 regulator-name = "vreg_l12b_1p8";
205 regulator-min-microvolt = <1800000>;
206 regulator-max-microvolt = <1800000>;
207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
208 regulator-allow-set-load;
209 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
210 RPMH_REGULATOR_MODE_HPM>;
211 };
212
213 vreg_l13b_3p0: ldo13 {
214 regulator-name = "vreg_l13b_3p0";
215 regulator-min-microvolt = <3000000>;
216 regulator-max-microvolt = <3000000>;
217 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 regulator-allow-set-load;
219 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
220 RPMH_REGULATOR_MODE_HPM>;
221 };
222
223 vreg_l14b_3p2: ldo14 {
224 regulator-name = "vreg_l14b_3p2";
225 regulator-min-microvolt = <3200000>;
226 regulator-max-microvolt = <3200000>;
227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
228 regulator-allow-set-load;
229 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
230 RPMH_REGULATOR_MODE_HPM>;
231 };
232
233 vreg_l15b_1p8: ldo15 {
234 regulator-name = "vreg_l15b_1p8";
235 regulator-min-microvolt = <1800000>;
236 regulator-max-microvolt = <1800000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 regulator-allow-set-load;
239 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
240 RPMH_REGULATOR_MODE_HPM>;
241 };
242
243 vreg_l16b_2p8: ldo16 {
244 regulator-name = "vreg_l16b_2p8";
245 regulator-min-microvolt = <2800000>;
246 regulator-max-microvolt = <2800000>;
247 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
248 regulator-allow-set-load;
249 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
250 RPMH_REGULATOR_MODE_HPM>;
251 };
252
253 vreg_l17b_2p5: ldo17 {
254 regulator-name = "vreg_l17b_2p5";
255 regulator-min-microvolt = <2504000>;
256 regulator-max-microvolt = <2504000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 regulator-allow-set-load;
259 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
260 RPMH_REGULATOR_MODE_HPM>;
261 };
262 };
263
264 regulators-1 {
265 compatible = "qcom,pm8550vs-rpmh-regulators";
266
267 vdd-l1-supply = <&vreg_s1c_1p2>;
268 vdd-l2-supply = <&vreg_s1c_1p2>;
269 vdd-l3-supply = <&vreg_s1c_1p2>;
270 vdd-s1-supply = <&vph_pwr>;
271 vdd-s2-supply = <&vph_pwr>;
272 vdd-s3-supply = <&vph_pwr>;
273 vdd-s4-supply = <&vph_pwr>;
274 vdd-s5-supply = <&vph_pwr>;
275 vdd-s6-supply = <&vph_pwr>;
276
277 qcom,pmic-id = "c";
278
279 vreg_s1c_1p2: smps1 {
280 regulator-name = "vreg_s1c_1p2";
281 regulator-min-microvolt = <1256000>;
282 regulator-max-microvolt = <1348000>;
283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
284 };
285
286 vreg_s2c_0p8: smps2 {
287 regulator-name = "vreg_s2c_0p8";
288 regulator-min-microvolt = <852000>;
289 regulator-max-microvolt = <1036000>;
290 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
291 };
292
293 vreg_s3c_0p9: smps3 {
294 regulator-name = "vreg_s3c_0p9";
295 regulator-min-microvolt = <976000>;
296 regulator-max-microvolt = <1064000>;
297 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
298 };
299
300 vreg_s4c_1p2: smps4 {
301 regulator-name = "vreg_s4c_1p2";
302 regulator-min-microvolt = <1224000>;
303 regulator-max-microvolt = <1280000>;
304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 };
306
307 vreg_s5c_0p7: smps5 {
308 regulator-name = "vreg_s5c_0p7";
309 regulator-min-microvolt = <752000>;
310 regulator-max-microvolt = <900000>;
311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
312 };
313
314 vreg_s6c_1p8: smps6 {
315 regulator-name = "vreg_s6c_1p8";
316 regulator-min-microvolt = <1856000>;
317 regulator-max-microvolt = <2000000>;
318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
319 };
320
321 vreg_l1c_1p2: ldo1 {
322 regulator-name = "vreg_l1c_1p2";
323 regulator-min-microvolt = <1200000>;
324 regulator-max-microvolt = <1200000>;
325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
326 regulator-allow-set-load;
327 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
328 RPMH_REGULATOR_MODE_HPM>;
329 };
330
331 vreg_l3c_1p2: ldo3 {
332 regulator-name = "vreg_l3c_1p2";
333 regulator-min-microvolt = <1200000>;
334 regulator-max-microvolt = <1200000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 regulator-allow-set-load;
337 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
338 RPMH_REGULATOR_MODE_HPM>;
339 };
340 };
341
342 regulators-2 {
343 compatible = "qcom,pm8550vs-rpmh-regulators";
344
345 vdd-l1-supply = <&vreg_s3c_0p9>;
346
347 qcom,pmic-id = "d";
348
349 vreg_l1d_0p88: ldo1 {
350 regulator-name = "vreg_l1d_0p88";
351 regulator-min-microvolt = <912000>;
352 regulator-max-microvolt = <920000>;
353 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
354 regulator-allow-set-load;
355 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
356 RPMH_REGULATOR_MODE_HPM>;
357 };
358 };
359
360 regulators-3 {
361 compatible = "qcom,pm8550vs-rpmh-regulators";
362
363 vdd-l3-supply = <&vreg_s3c_0p9>;
364
365 qcom,pmic-id = "e";
366
367 vreg_l3e_0p9: ldo3 {
368 regulator-name = "vreg_l3e_0p9";
369 regulator-min-microvolt = <880000>;
370 regulator-max-microvolt = <920000>;
371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
372 regulator-allow-set-load;
373 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
374 RPMH_REGULATOR_MODE_HPM>;
375 };
376 };
377
378 regulators-4 {
379 compatible = "qcom,pm8550vs-rpmh-regulators";
380
381 vdd-l1-supply = <&vreg_s3c_0p9>;
382 vdd-l3-supply = <&vreg_s3c_0p9>;
383
384 qcom,pmic-id = "g";
385
386 vreg_l1g_0p91: ldo1 {
387 regulator-name = "vreg_l1g_0p91";
388 regulator-min-microvolt = <912000>;
389 regulator-max-microvolt = <920000>;
390 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
391 regulator-allow-set-load;
392 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
393 RPMH_REGULATOR_MODE_HPM>;
394 };
395
396 vreg_l3g_0p91: ldo3 {
397 regulator-name = "vreg_l3g_0p91";
398 regulator-min-microvolt = <880000>;
399 regulator-max-microvolt = <912000>;
400 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
401 regulator-allow-set-load;
402 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
403 RPMH_REGULATOR_MODE_HPM>;
404 };
405 };
406
407 regulators-5 {
408 compatible = "qcom,pm8550ve-rpmh-regulators";
409
410 vdd-l1-supply = <&vreg_s3c_0p9>;
411 vdd-l2-supply = <&vreg_s3c_0p9>;
412 vdd-l3-supply = <&vreg_s1c_1p2>;
413 vdd-s4-supply = <&vph_pwr>;
414
415 qcom,pmic-id = "i";
416
417 vreg_s4i_0p85: smps4 {
418 regulator-name = "vreg_s4i_0p85";
419 regulator-min-microvolt = <852000>;
420 regulator-max-microvolt = <1004000>;
421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
422 };
423
424 vreg_l1i_0p88: ldo1 {
425 regulator-name = "vreg_l1i_0p88";
426 regulator-min-microvolt = <880000>;
427 regulator-max-microvolt = <912000>;
428 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
429 regulator-allow-set-load;
430 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
431 RPMH_REGULATOR_MODE_HPM>;
432 };
433
434 vreg_l2i_0p88: ldo2 {
435 regulator-name = "vreg_l2i_0p88";
436 regulator-min-microvolt = <880000>;
437 regulator-max-microvolt = <912000>;
438 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
439 regulator-allow-set-load;
440 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
441 RPMH_REGULATOR_MODE_HPM>;
442 };
443
444 vreg_l3i_1p2: ldo3 {
445 regulator-name = "vreg_l3i_0p91";
446 regulator-min-microvolt = <1200000>;
447 regulator-max-microvolt = <1200000>;
448 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
449 regulator-allow-set-load;
450 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
451 RPMH_REGULATOR_MODE_HPM>;
452 };
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]453 };
454
455 regulators-6 {
456 compatible = "qcom,pm8010-rpmh-regulators";
457 qcom,pmic-id = "m";
458
459 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
460 vdd-l3-l4-supply = <&vreg_bob2>;
461 vdd-l5-supply = <&vreg_s6c_1p8>;
462 vdd-l6-supply = <&vreg_bob1>;
463 vdd-l7-supply = <&vreg_bob1>;
464
465 vreg_l1m_1p1: ldo1 {
466 regulator-name = "vreg_l1m_1p1";
467 regulator-min-microvolt = <1104000>;
468 regulator-max-microvolt = <1104000>;
469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
470 regulator-allow-set-load;
471 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
472 RPMH_REGULATOR_MODE_HPM>;
473 };
474
475 vreg_l2m_1p056: ldo2 {
476 regulator-name = "vreg_l2m_1p056";
477 regulator-min-microvolt = <1056000>;
478 regulator-max-microvolt = <1056000>;
479 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
480 regulator-allow-set-load;
481 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
482 RPMH_REGULATOR_MODE_HPM>;
483 };
484
485 vreg_l3m_2p8: ldo3 {
486 regulator-name = "vreg_l3m_2p8";
487 regulator-min-microvolt = <2800000>;
488 regulator-max-microvolt = <2800000>;
489 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
490 };
491
492 vreg_l4m_2p8: ldo4 {
493 regulator-name = "vreg_l4m_2p8";
494 regulator-min-microvolt = <2800000>;
495 regulator-max-microvolt = <2800000>;
496 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
497 };
498
499 vreg_l5m_1p8: ldo5 {
500 regulator-name = "vreg_l5m_1p8";
501 regulator-min-microvolt = <1800000>;
502 regulator-max-microvolt = <1800000>;
503 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
504 };
505
506 vreg_l6m_2p8: ldo6 {
507 regulator-name = "vreg_l6m_2p8";
508 regulator-min-microvolt = <2800000>;
509 regulator-max-microvolt = <2800000>;
510 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
511 };
512
513 vreg_l7m_2p96: ldo7 {
514 regulator-name = "vreg_l7m_2p96";
515 regulator-min-microvolt = <2960000>;
516 regulator-max-microvolt = <2960000>;
517 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
518 };
519 };
520
521 regulators-7 {
522 compatible = "qcom,pm8010-rpmh-regulators";
523 qcom,pmic-id = "n";
524
525 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
526 vdd-l3-l4-supply = <&vreg_s6c_1p8>;
527 vdd-l5-supply = <&vreg_bob2>;
528 vdd-l6-supply = <&vreg_bob2>;
529 vdd-l7-supply = <&vreg_bob1>;
530
531 vreg_l1n_1p1: ldo1 {
532 regulator-name = "vreg_l1n_1p1";
533 regulator-min-microvolt = <1104000>;
534 regulator-max-microvolt = <1104000>;
535 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
536 regulator-allow-set-load;
537 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
538 RPMH_REGULATOR_MODE_HPM>;
539 };
540
541 vreg_l2n_1p056: ldo2 {
542 regulator-name = "vreg_l2n_1p056";
543 regulator-min-microvolt = <1056000>;
544 regulator-max-microvolt = <1056000>;
545 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
546 regulator-allow-set-load;
547 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
548 RPMH_REGULATOR_MODE_HPM>;
549 };
550
551 vreg_l3n_1p8: ldo3 {
552 regulator-name = "vreg_l3n_1p8";
553 regulator-min-microvolt = <1800000>;
554 regulator-max-microvolt = <1800000>;
555 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
556 };
557
558 vreg_l4n_1p8: ldo4 {
559 regulator-name = "vreg_l4n_1p8";
560 regulator-min-microvolt = <1800000>;
561 regulator-max-microvolt = <1800000>;
562 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
563 };
564
565 vreg_l5n_2p8: ldo5 {
566 regulator-name = "vreg_l5n_2p8";
567 regulator-min-microvolt = <2800000>;
568 regulator-max-microvolt = <2800000>;
569 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
570 };
571
572 vreg_l6n_2p8: ldo6 {
573 regulator-name = "vreg_l6n_2p8";
574 regulator-min-microvolt = <2800000>;
575 regulator-max-microvolt = <2800000>;
576 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
577 };
578
579 vreg_l7n_3p3: ldo7 {
580 regulator-name = "vreg_l7n_3p3";
581 regulator-min-microvolt = <3304000>;
582 regulator-max-microvolt = <3304000>;
583 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
584 };
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]585 };
586};
587
588&dispcc {
589 status = "okay";
590};
591
592&lpass_tlmm {
593 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
594 pins = "gpio21";
595 function = "gpio";
596 drive-strength = <16>;
597 bias-disable;
598 output-low;
599 };
600};
601
602&mdss {
603 status = "okay";
604};
605
606&mdss_dsi0 {
607 vdda-supply = <&vreg_l3i_1p2>;
608
609 status = "okay";
610
611 panel@0 {
612 compatible = "visionox,vtdr6130";
613 reg = <0>;
614
615 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
616
617 vddio-supply = <&vreg_l12b_1p8>;
618 vci-supply = <&vreg_l13b_3p0>;
619 vdd-supply = <&vreg_l11b_1p2>;
620
621 pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
622 pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
623 pinctrl-names = "default", "sleep";
624
625 port {
626 panel0_in: endpoint {
627 remote-endpoint = <&mdss_dsi0_out>;
628 };
629 };
630 };
631};
632
633&mdss_dsi0_out {
634 remote-endpoint = <&panel0_in>;
635 data-lanes = <0 1 2 3>;
636};
637
638&mdss_dsi0_phy {
639 vdds-supply = <&vreg_l1i_0p88>;
640
641 status = "okay";
642};
643
644&mdss_mdp {
645 status = "okay";
646};
647
648&pcie_1_phy_aux_clk {
649 clock-frequency = <1000>;
650};
651
652&pcie0 {
653 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
654 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
655
656 pinctrl-0 = <&pcie0_default_state>;
657 pinctrl-names = "default";
658
659 status = "okay";
660};
661
662&pcie0_phy {
663 vdda-phy-supply = <&vreg_l1i_0p88>;
664 vdda-pll-supply = <&vreg_l3i_1p2>;
665
666 status = "okay";
667};
668
669&pcie1 {
670 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
671 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
672
673 pinctrl-0 = <&pcie1_default_state>;
674 pinctrl-names = "default";
675
676 status = "okay";
677};
678
679&pcie1_phy {
680 vdda-phy-supply = <&vreg_l3e_0p9>;
681 vdda-pll-supply = <&vreg_l3i_1p2>;
682 vdda-qref-supply = <&vreg_l1i_0p88>;
683
684 status = "okay";
685};
686
687&pm8550_gpios {
688 sdc2_card_det_n: sdc2-card-det-state {
689 pins = "gpio12";
690 function = "normal";
691 bias-pull-up;
692 input-enable;
693 output-disable;
694 power-source = <1>; /* 1.8 V */
695 };
696};
697
698&pm8550b_eusb2_repeater {
699 vdd18-supply = <&vreg_l15b_1p8>;
700 vdd3-supply = <&vreg_l5b_3p1>;
701};
702
703&qupv3_id_1 {
704 status = "okay";
705};
706
707&remoteproc_adsp {
708 firmware-name = "qcom/sm8650/adsp.mbn",
709 "qcom/sm8650/adsp_dtb.mbn";
710
711 status = "okay";
712};
713
714&remoteproc_cdsp {
715 firmware-name = "qcom/sm8650/cdsp.mbn",
716 "qcom/sm8650/cdsp_dtb.mbn";
717
718 status = "okay";
719};
720
721&remoteproc_mpss {
722 firmware-name = "qcom/sm8650/modem.mbn",
723 "qcom/sm8650/modem_dtb.mbn";
724
725 status = "okay";
726};
727
728&sdhc_2 {
729 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
730
731 vmmc-supply = <&vreg_l9b_2p9>;
732 vqmmc-supply = <&vreg_l8b_1p8>;
733 bus-width = <4>;
734 no-sdio;
735 no-mmc;
736
737 pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
738 pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
739 pinctrl-names = "default", "sleep";
740
741 status = "okay";
742};
743
744&sleep_clk {
745 clock-frequency = <32000>;
746};
747
748&swr0 {
749 status = "okay";
750
751 /* WSA8845, Speaker Left */
752 left_spkr: speaker@0,0 {
753 compatible = "sdw20217020400";
754 reg = <0 0>;
755 pinctrl-0 = <&spkr_1_sd_n_active>;
756 pinctrl-names = "default";
757 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
758 #sound-dai-cells = <0>;
759 sound-name-prefix = "SpkrLeft";
760 vdd-1p8-supply = <&vreg_l15b_1p8>;
761 vdd-io-supply = <&vreg_l3c_1p2>;
762 };
763
764 /* WSA8845, Speaker Right */
765 right_spkr: speaker@0,1 {
766 compatible = "sdw20217020400";
767 reg = <0 1>;
768 pinctrl-0 = <&spkr_2_sd_n_active>;
769 pinctrl-names = "default";
770 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
771 #sound-dai-cells = <0>;
772 sound-name-prefix = "SpkrRight";
773 vdd-1p8-supply = <&vreg_l15b_1p8>;
774 vdd-io-supply = <&vreg_l3c_1p2>;
775 };
776};
777
778&tlmm {
779 /* Reserved I/Os for NFC */
780 gpio-reserved-ranges = <32 8>, <74 1>;
781
782 disp0_reset_n_active: disp0-reset-n-active-state {
783 pins = "gpio133";
784 function = "gpio";
785 drive-strength = <8>;
786 bias-disable;
787 };
788
789 disp0_reset_n_suspend: disp0-reset-n-suspend-state {
790 pins = "gpio133";
791 function = "gpio";
792 drive-strength = <2>;
793 bias-pull-down;
794 };
795
796 mdp_vsync_active: mdp-vsync-active-state {
797 pins = "gpio86";
798 function = "mdp_vsync";
799 drive-strength = <2>;
800 bias-pull-down;
801 };
802
803 mdp_vsync_suspend: mdp-vsync-suspend-state {
804 pins = "gpio86";
805 function = "mdp_vsync";
806 drive-strength = <2>;
807 bias-pull-down;
808 };
809
810 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
811 pins = "gpio77";
812 function = "gpio";
813 drive-strength = <16>;
814 bias-disable;
815 output-low;
816 };
817};
818
819&uart15 {
820 status = "okay";
821};
822
823&ufs_mem_hc {
824 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
825
826 vcc-supply = <&vreg_l17b_2p5>;
827 vcc-max-microamp = <1300000>;
828 vccq-supply = <&vreg_l1c_1p2>;
829 vccq-max-microamp = <1200000>;
830
831 status = "okay";
832};
833
834&ufs_mem_phy {
835 vdda-phy-supply = <&vreg_l1d_0p88>;
836 vdda-pll-supply = <&vreg_l3i_1p2>;
837
838 status = "okay";
839};
840
841/*
842 * DPAUX -> WCD9395 -> USB_SBU -> USB-C
843 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
844 * USB SS -> USB-C
845 */
846
847&usb_1 {
848 status = "okay";
849};
850
851&usb_1_dwc3 {
852 dr_mode = "otg";
853 usb-role-switch;
854};
855
856&usb_1_dwc3_hs {
857 remote-endpoint = <&pmic_glink_hs_in>;
858};
859
860&usb_1_dwc3_ss {
861 remote-endpoint = <&pmic_glink_ss_in>;
862};
863
864&usb_1_hsphy {
865 vdd-supply = <&vreg_l1i_0p88>;
866 vdda12-supply = <&vreg_l3i_1p2>;
867
868 phys = <&pm8550b_eusb2_repeater>;
869
870 status = "okay";
871};
872
873&usb_dp_qmpphy {
874 vdda-phy-supply = <&vreg_l3i_1p2>;
875 vdda-pll-supply = <&vreg_l3g_0p91>;
876
877 status = "okay";
878};
879
880&xo_board {
881 clock-frequency = <76800000>;
882};