Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 94ef0166f2cd373ee29a9bb11cb8150561750139 / . / dts / upstream / src / arm64 / exynos / exynos5433-tm2-common.dtsi
blob: 8f02de8480b63d0a3a7609ac947792aae8047ee2 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung Exynos5433 TM2 board device tree source
4 *
5 * Copyright (c) 2016 Samsung Electronics Co., Ltd.
6 *
7 * Common device tree source file for Samsung's TM2 and TM2E boards
8 * which are based on Samsung Exynos5433 SoC.
9 */
10
11/dts-v1/;
12#include "exynos5433.dtsi"
13#include <dt-bindings/clock/samsung,s2mps11.h>
14#include <dt-bindings/gpio/gpio.h>
15#include <dt-bindings/input/input.h>
16#include <dt-bindings/interrupt-controller/irq.h>
17#include <dt-bindings/sound/samsung-i2s.h>
18
19/ {
20 aliases {
21 gsc0 = &gsc_0;
22 gsc1 = &gsc_1;
23 gsc2 = &gsc_2;
24 mmc0 = &mshc_0;
25 mmc2 = &mshc_2;
26 pinctrl0 = &pinctrl_alive;
27 pinctrl1 = &pinctrl_aud;
28 pinctrl2 = &pinctrl_cpif;
29 pinctrl3 = &pinctrl_ese;
30 pinctrl4 = &pinctrl_finger;
31 pinctrl5 = &pinctrl_fsys;
32 pinctrl6 = &pinctrl_imem;
33 pinctrl7 = &pinctrl_nfc;
34 pinctrl8 = &pinctrl_peric;
35 pinctrl9 = &pinctrl_touch;
36 serial0 = &serial_0;
37 serial1 = &serial_1;
38 serial2 = &serial_2;
39 serial3 = &serial_3;
40 spi0 = &spi_0;
41 spi1 = &spi_1;
42 spi2 = &spi_2;
43 spi3 = &spi_3;
44 spi4 = &spi_4;
45 };
46
47 chosen {
48 stdout-path = &serial_1;
49 };
50
51 memory@20000000 {
52 device_type = "memory";
53 reg = <0x0 0x20000000 0x0 0xc0000000>;
54 };
55
56 gpio-keys {
57 compatible = "gpio-keys";
58
59 power-key {
60 gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
61 linux,code = <KEY_POWER>;
62 label = "power key";
63 debounce-interval = <10>;
64 };
65
66 volume-up-key {
67 gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
68 linux,code = <KEY_VOLUMEUP>;
69 label = "volume-up key";
70 debounce-interval = <10>;
71 };
72
73 volume-down-key {
74 gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
75 linux,code = <KEY_VOLUMEDOWN>;
76 label = "volume-down key";
77 debounce-interval = <10>;
78 };
79
80 homepage-key {
81 gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
82 linux,code = <KEY_MENU>;
83 label = "homepage key";
84 debounce-interval = <10>;
85 };
86 };
87
88 i2c_max98504: i2c-gpio-0 {
89 compatible = "i2c-gpio";
90 sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
91 scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
92 i2c-gpio,delay-us = <2>;
93 #address-cells = <1>;
94 #size-cells = <0>;
95
96 max98504: amplifier@31 {
97 compatible = "maxim,max98504";
98 reg = <0x31>;
99
100 DIOVDD-supply = <&ldo3_reg>;
101 DVDD-supply = <&ldo3_reg>;
102 PVDD-supply = <&vph_pwr_regulator>;
103 };
104 };
105
106 vph_pwr_regulator: regulator-vph-pwr {
107 compatible = "regulator-fixed";
108 regulator-name = "VPH_PWR";
109 regulator-min-microvolt = <4200000>;
110 regulator-max-microvolt = <4200000>;
111 };
112
113 irda_regulator: regulator-irda {
114 compatible = "regulator-fixed";
115 enable-active-high;
116 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
117 regulator-name = "irda_regulator";
118 };
119
120 sound {
121 compatible = "samsung,tm2-audio";
122 audio-codec = <&wm5110>, <&hdmi>;
123 i2s-controller = <&i2s0 0>, <&i2s1 0>;
124 audio-amplifier = <&max98504>;
125 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
126 model = "wm5110";
127 audio-routing = /* Headphone */
128 "HP", "HPOUT1L",
129 "HP", "HPOUT1R",
130
131 /* Speaker */
132 "SPK", "SPKOUT",
133 "SPKOUT", "HPOUT2L",
134 "SPKOUT", "HPOUT2R",
135
136 /* Receiver */
137 "RCV", "HPOUT3L",
138 "RCV", "HPOUT3R";
139 };
140};
141
142&adc {
143 vdd-supply = <&ldo3_reg>;
144 status = "okay";
145
146 thermistor-ap {
147 compatible = "murata,ncp03wf104";
148 pullup-uv = <1800000>;
149 pullup-ohm = <100000>;
150 pulldown-ohm = <0>;
151 io-channels = <&adc 0>;
152 };
153
154 thermistor-battery {
155 compatible = "murata,ncp03wf104";
156 pullup-uv = <1800000>;
157 pullup-ohm = <100000>;
158 pulldown-ohm = <0>;
159 io-channels = <&adc 1>;
160 #thermal-sensor-cells = <0>;
161 };
162
163 thermistor-charger {
164 compatible = "murata,ncp03wf104";
165 pullup-uv = <1800000>;
166 pullup-ohm = <100000>;
167 pulldown-ohm = <0>;
168 io-channels = <&adc 2>;
169 };
170};
171
172&bus_g2d_400 {
173 devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
174 vdd-supply = <&buck4_reg>;
175 exynos,saturation-ratio = <10>;
176 status = "okay";
177};
178
179&bus_g2d_266 {
180 devfreq = <&bus_g2d_400>;
181 status = "okay";
182};
183
184&bus_gscl {
185 devfreq = <&bus_g2d_400>;
186 status = "okay";
187};
188
189&bus_hevc {
190 devfreq = <&bus_g2d_400>;
191 status = "okay";
192};
193
194&bus_jpeg {
195 devfreq = <&bus_g2d_400>;
196 status = "okay";
197};
198
199&bus_mfc {
200 devfreq = <&bus_g2d_400>;
201 status = "okay";
202};
203
204&bus_mscl {
205 devfreq = <&bus_g2d_400>;
206 status = "okay";
207};
208
209&bus_noc0 {
210 devfreq = <&bus_g2d_400>;
211 status = "okay";
212};
213
214&bus_noc1 {
215 devfreq = <&bus_g2d_400>;
216 status = "okay";
217};
218
219&bus_noc2 {
220 devfreq = <&bus_g2d_400>;
221 status = "okay";
222};
223
224&cmu_aud {
225 assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
226 <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
227 <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
228 <&cmu_top CLK_MOUT_AUD_PLL>,
229 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
230 <&cmu_top CLK_MOUT_SCLK_AUDIO0>,
231 <&cmu_top CLK_MOUT_SCLK_AUDIO1>,
232 <&cmu_top CLK_MOUT_SCLK_SPDIF>,
233
234 <&cmu_aud CLK_DIV_AUD_CA5>,
235 <&cmu_aud CLK_DIV_ACLK_AUD>,
236 <&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
237 <&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
238 <&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
239 <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
240 <&cmu_aud CLK_DIV_SCLK_AUD_UART>,
241 <&cmu_top CLK_DIV_SCLK_AUDIO0>,
242 <&cmu_top CLK_DIV_SCLK_AUDIO1>,
243 <&cmu_top CLK_DIV_SCLK_PCM1>,
244 <&cmu_top CLK_DIV_SCLK_I2S1>;
245
246 assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
247 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
248 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
249 <&cmu_top CLK_FOUT_AUD_PLL>,
250 <&cmu_top CLK_MOUT_AUD_PLL>,
251 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
252 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
253 <&cmu_top CLK_SCLK_AUDIO0>;
254
255 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
256 <196608001>, <65536001>, <32768001>, <49152001>,
257 <2048001>, <24576001>, <196608001>,
258 <24576001>, <98304001>, <2048001>, <49152001>;
259};
260
261&cmu_fsys {
262 assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
263 <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
264 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
265 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
266 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
267 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
268 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
269 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
270 <&cmu_top CLK_DIV_SCLK_USBDRD30>,
271 <&cmu_top CLK_DIV_SCLK_USBHOST30>;
272 assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
273 <&cmu_top CLK_MOUT_BUS_PLL_USER>,
274 <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
275 <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
276 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
277 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
278 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
279 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
280 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
281 <66700000>, <66700000>;
282};
283
284&cmu_gscl {
285 assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
286 <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
287 assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
288 <&cmu_top CLK_ACLK_GSCL_333>;
289};
290
291&cmu_mfc {
292 assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
293 assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
294};
295
296&cmu_mif {
297 assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
298 assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
299 assigned-clock-rates = <0>, <333000000>;
300};
301
302&cmu_mscl {
303 assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
304 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
305 <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
306 <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
307 assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
308 <&cmu_top CLK_SCLK_JPEG_MSCL>,
309 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
310 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
311};
312
313&cmu_top {
314 assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
315 assigned-clock-rates = <196608001>;
316};
317
318&cpu0 {
319 cpu-supply = <&buck3_reg>;
320};
321
322&cpu4 {
323 cpu-supply = <&buck2_reg>;
324};
325
326&decon {
327 status = "okay";
328};
329
330&decon_tv {
331 status = "okay";
332
333 ports {
334 #address-cells = <1>;
335 #size-cells = <0>;
336
337 port@0 {
338 reg = <0>;
339 tv_to_hdmi: endpoint {
340 remote-endpoint = <&hdmi_to_tv>;
341 };
342 };
343 };
344};
345
346&dsi {
347 status = "okay";
348 vddcore-supply = <&ldo6_reg>;
349 vddio-supply = <&ldo7_reg>;
350 samsung,burst-clock-frequency = <512000000>;
351 samsung,esc-clock-frequency = <16000000>;
352 samsung,pll-clock-frequency = <24000000>;
353 pinctrl-names = "default";
354 pinctrl-0 = <&te_irq>;
355};
356
357&gpu {
358 mali-supply = <&buck6_reg>;
359 status = "okay";
360};
361
362&hdmi {
363 hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
364 status = "okay";
365 vdd-supply = <&ldo6_reg>;
366 vdd_osc-supply = <&ldo7_reg>;
367 vdd_pll-supply = <&ldo6_reg>;
368
369 ports {
370 #address-cells = <1>;
371 #size-cells = <0>;
372
373 port@0 {
374 reg = <0>;
375 hdmi_to_tv: endpoint {
376 remote-endpoint = <&tv_to_hdmi>;
377 };
378 };
379
380 port@1 {
381 reg = <1>;
382 hdmi_to_mhl: endpoint {
383 remote-endpoint = <&mhl_to_hdmi>;
384 };
385 };
386 };
387};
388
389&hsi2c_0 {
390 status = "okay";
391 clock-frequency = <2500000>;
392
393 pmic@66 {
394 compatible = "samsung,s2mps13-pmic";
395 interrupt-parent = <&gpa0>;
396 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
397 reg = <0x66>;
398 samsung,s2mps11-wrstbi-ground;
399 wakeup-source;
400
401 s2mps13_osc: clocks {
402 compatible = "samsung,s2mps13-clk";
403 #clock-cells = <1>;
404 clock-output-names = "s2mps13_ap", "s2mps13_cp",
405 "s2mps13_bt";
406 };
407
408 regulators {
409 ldo1_reg: LDO1 {
410 regulator-name = "VDD_ALIVE_0.9V_AP";
411 regulator-min-microvolt = <900000>;
412 regulator-max-microvolt = <900000>;
413 regulator-always-on;
414 };
415
416 ldo2_reg: LDO2 {
417 regulator-name = "VDDQ_MMC2_2.8V_AP";
418 regulator-min-microvolt = <2800000>;
419 regulator-max-microvolt = <2800000>;
420 regulator-always-on;
421 regulator-state-mem {
422 regulator-off-in-suspend;
423 };
424 };
425
426 ldo3_reg: LDO3 {
427 regulator-name = "VDD1_E_1.8V_AP";
428 regulator-min-microvolt = <1800000>;
429 regulator-max-microvolt = <1800000>;
430 regulator-always-on;
431 };
432
433 ldo4_reg: LDO4 {
434 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
435 regulator-min-microvolt = <1300000>;
436 regulator-max-microvolt = <1300000>;
437 regulator-always-on;
438 regulator-state-mem {
439 regulator-off-in-suspend;
440 };
441 };
442
443 ldo5_reg: LDO5 {
444 regulator-name = "VDD10_DPLL_1.0V_AP";
445 regulator-min-microvolt = <1000000>;
446 regulator-max-microvolt = <1000000>;
447 regulator-always-on;
448 regulator-state-mem {
449 regulator-off-in-suspend;
450 };
451 };
452
453 ldo6_reg: LDO6 {
454 regulator-name = "VDD10_MIPI2L_1.0V_AP";
455 regulator-min-microvolt = <1000000>;
456 regulator-max-microvolt = <1000000>;
457 regulator-state-mem {
458 regulator-off-in-suspend;
459 };
460 };
461
462 ldo7_reg: LDO7 {
463 regulator-name = "VDD18_MIPI2L_1.8V_AP";
464 regulator-min-microvolt = <1800000>;
465 regulator-max-microvolt = <1800000>;
466 regulator-always-on;
467 regulator-state-mem {
468 regulator-off-in-suspend;
469 };
470 };
471
472 ldo8_reg: LDO8 {
473 regulator-name = "VDD18_LLI_1.8V_AP";
474 regulator-min-microvolt = <1800000>;
475 regulator-max-microvolt = <1800000>;
476 regulator-always-on;
477 regulator-state-mem {
478 regulator-off-in-suspend;
479 };
480 };
481
482 ldo9_reg: LDO9 {
483 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
484 regulator-min-microvolt = <1800000>;
485 regulator-max-microvolt = <1800000>;
486 regulator-always-on;
487 regulator-state-mem {
488 regulator-off-in-suspend;
489 };
490 };
491
492 ldo10_reg: LDO10 {
493 regulator-name = "VDD33_USB30_3.0V_AP";
494 regulator-min-microvolt = <3000000>;
495 regulator-max-microvolt = <3000000>;
496 regulator-state-mem {
497 regulator-off-in-suspend;
498 };
499 };
500
501 ldo11_reg: LDO11 {
502 regulator-name = "VDD_INT_M_1.0V_AP";
503 regulator-min-microvolt = <1000000>;
504 regulator-max-microvolt = <1000000>;
505 regulator-always-on;
506 regulator-state-mem {
507 regulator-off-in-suspend;
508 };
509 };
510
511 ldo12_reg: LDO12 {
512 regulator-name = "VDD_KFC_M_1.1V_AP";
513 regulator-min-microvolt = <800000>;
514 regulator-max-microvolt = <1350000>;
515 regulator-always-on;
516 };
517
518 ldo13_reg: LDO13 {
519 regulator-name = "VDD_G3D_M_0.95V_AP";
520 regulator-min-microvolt = <950000>;
521 regulator-max-microvolt = <950000>;
522 regulator-always-on;
523 regulator-state-mem {
524 regulator-off-in-suspend;
525 };
526 };
527
528 ldo14_reg: LDO14 {
529 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
530 regulator-min-microvolt = <1200000>;
531 regulator-max-microvolt = <1200000>;
532 regulator-always-on;
533 regulator-state-mem {
534 regulator-off-in-suspend;
535 };
536 };
537
538 ldo15_reg: LDO15 {
539 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
540 regulator-min-microvolt = <1200000>;
541 regulator-max-microvolt = <1200000>;
542 regulator-always-on;
543 regulator-state-mem {
544 regulator-off-in-suspend;
545 };
546 };
547
548 ldo16_reg: LDO16 {
549 regulator-name = "VDDQ_EFUSE";
550 regulator-min-microvolt = <1400000>;
551 regulator-max-microvolt = <3400000>;
552 regulator-always-on;
553 };
554
555 ldo17_reg: LDO17 {
556 regulator-name = "V_TFLASH_2.8V_AP";
557 regulator-min-microvolt = <2800000>;
558 regulator-max-microvolt = <2800000>;
559 };
560
561 ldo18_reg: LDO18 {
562 regulator-name = "V_CODEC_1.8V_AP";
563 regulator-min-microvolt = <1800000>;
564 regulator-max-microvolt = <1800000>;
565 };
566
567 ldo19_reg: LDO19 {
568 regulator-name = "VDDA_1.8V_COMP";
569 regulator-min-microvolt = <1800000>;
570 regulator-max-microvolt = <1800000>;
571 regulator-always-on;
572 };
573
574 ldo20_reg: LDO20 {
575 regulator-name = "VCC_2.8V_AP";
576 regulator-min-microvolt = <2800000>;
577 regulator-max-microvolt = <2800000>;
578 regulator-always-on;
579 };
580
581 ldo21_reg: LDO21 {
582 regulator-name = "VT_CAM_1.8V";
583 regulator-min-microvolt = <1800000>;
584 regulator-max-microvolt = <1800000>;
585 };
586
587 ldo22_reg: LDO22 {
588 regulator-name = "CAM_IO_1.8V_AP";
589 regulator-min-microvolt = <1800000>;
590 regulator-max-microvolt = <1800000>;
591 };
592
593 ldo23_reg: LDO23 {
594 regulator-name = "CAM_SEN_CORE_1.05V_AP";
595 regulator-min-microvolt = <1050000>;
596 regulator-max-microvolt = <1050000>;
597 };
598
599 ldo24_reg: LDO24 {
600 regulator-name = "VT_CAM_1.2V";
601 regulator-min-microvolt = <1200000>;
602 regulator-max-microvolt = <1200000>;
603 };
604
605 ldo25_reg: LDO25 {
606 regulator-name = "UNUSED_LDO25";
607 regulator-min-microvolt = <2800000>;
608 regulator-max-microvolt = <2800000>;
609 };
610
611 ldo26_reg: LDO26 {
612 regulator-name = "CAM_AF_2.8V_AP";
613 regulator-min-microvolt = <2800000>;
614 regulator-max-microvolt = <2800000>;
615 };
616
617 ldo27_reg: LDO27 {
618 regulator-name = "VCC_3.0V_LCD_AP";
619 regulator-min-microvolt = <3000000>;
620 regulator-max-microvolt = <3000000>;
621 };
622
623 ldo28_reg: LDO28 {
624 regulator-name = "VCC_1.8V_LCD_AP";
625 regulator-min-microvolt = <1800000>;
626 regulator-max-microvolt = <1800000>;
627 };
628
629 ldo29_reg: LDO29 {
630 regulator-name = "VT_CAM_2.8V";
631 regulator-min-microvolt = <3000000>;
632 regulator-max-microvolt = <3000000>;
633 };
634
635 ldo30_reg: LDO30 {
636 regulator-name = "TSP_AVDD_3.3V_AP";
637 regulator-min-microvolt = <3300000>;
638 regulator-max-microvolt = <3300000>;
639 };
640
641 ldo31_reg: LDO31 {
642 /*
643 * LDO31 differs from target to target,
644 * its definition is in the .dts
645 */
646 };
647
648 ldo32_reg: LDO32 {
649 regulator-name = "VTOUCH_1.8V_AP";
650 regulator-min-microvolt = <1800000>;
651 regulator-max-microvolt = <1800000>;
652 };
653
654 ldo33_reg: LDO33 {
655 regulator-name = "VTOUCH_LED_3.3V";
656 regulator-min-microvolt = <2500000>;
657 regulator-max-microvolt = <3300000>;
658 regulator-ramp-delay = <12500>;
659 };
660
661 ldo34_reg: LDO34 {
662 regulator-name = "VCC_1.8V_MHL_AP";
663 regulator-min-microvolt = <1000000>;
664 regulator-max-microvolt = <2100000>;
665 };
666
667 ldo35_reg: LDO35 {
668 regulator-name = "OIS_VM_2.8V";
669 regulator-min-microvolt = <1800000>;
670 regulator-max-microvolt = <2800000>;
671 };
672
673 ldo36_reg: LDO36 {
674 regulator-name = "VSIL_1.0V";
675 regulator-min-microvolt = <1000000>;
676 regulator-max-microvolt = <1000000>;
677 };
678
679 ldo37_reg: LDO37 {
680 regulator-name = "VF_1.8V";
681 regulator-min-microvolt = <1800000>;
682 regulator-max-microvolt = <1800000>;
683 };
684
685 ldo38_reg: LDO38 {
686 /*
687 * LDO38 differs from target to target,
688 * its definition is in the .dts
689 */
690 };
691
692 ldo39_reg: LDO39 {
693 regulator-name = "V_HRM_1.8V";
694 regulator-min-microvolt = <1800000>;
695 regulator-max-microvolt = <1800000>;
696 };
697
698 ldo40_reg: LDO40 {
699 regulator-name = "V_HRM_3.3V";
700 regulator-min-microvolt = <3300000>;
701 regulator-max-microvolt = <3300000>;
702 };
703
704 buck1_reg: BUCK1 {
705 regulator-name = "VDD_MIF_0.9V_AP";
706 regulator-min-microvolt = <600000>;
707 regulator-max-microvolt = <1500000>;
708 regulator-always-on;
709 regulator-state-mem {
710 regulator-off-in-suspend;
711 };
712 };
713
714 buck2_reg: BUCK2 {
715 regulator-name = "VDD_EGL_1.0V_AP";
716 regulator-min-microvolt = <900000>;
717 regulator-max-microvolt = <1300000>;
718 regulator-always-on;
719 regulator-state-mem {
720 regulator-off-in-suspend;
721 };
722 };
723
724 buck3_reg: BUCK3 {
725 regulator-name = "VDD_KFC_1.0V_AP";
726 regulator-min-microvolt = <800000>;
727 regulator-max-microvolt = <1200000>;
728 regulator-always-on;
729 regulator-state-mem {
730 regulator-off-in-suspend;
731 };
732 };
733
734 buck4_reg: BUCK4 {
735 regulator-name = "VDD_INT_0.95V_AP";
736 regulator-min-microvolt = <600000>;
737 regulator-max-microvolt = <1500000>;
738 regulator-always-on;
739 regulator-state-mem {
740 regulator-off-in-suspend;
741 };
742 };
743
744 buck5_reg: BUCK5 {
745 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
746 regulator-min-microvolt = <600000>;
747 regulator-max-microvolt = <1500000>;
748 regulator-always-on;
749 regulator-state-mem {
750 regulator-off-in-suspend;
751 };
752 };
753
754 buck6_reg: BUCK6 {
755 regulator-name = "VDD_G3D_0.9V_AP";
756 regulator-min-microvolt = <600000>;
757 regulator-max-microvolt = <1500000>;
758 regulator-always-on;
759 regulator-state-mem {
760 regulator-off-in-suspend;
761 };
762 };
763
764 buck7_reg: BUCK7 {
765 regulator-name = "VDD_MEM1_1.2V_AP";
766 regulator-min-microvolt = <1200000>;
767 regulator-max-microvolt = <1200000>;
768 regulator-always-on;
769 };
770
771 buck8_reg: BUCK8 {
772 regulator-name = "VDD_LLDO_1.35V_AP";
773 regulator-min-microvolt = <1350000>;
774 regulator-max-microvolt = <3300000>;
775 regulator-always-on;
776 };
777
778 buck9_reg: BUCK9 {
779 regulator-name = "VDD_MLDO_2.0V_AP";
780 regulator-min-microvolt = <1350000>;
781 regulator-max-microvolt = <3300000>;
782 regulator-always-on;
783 };
784
785 buck10_reg: BUCK10 {
786 regulator-name = "vdd_mem2";
787 regulator-min-microvolt = <550000>;
788 regulator-max-microvolt = <1500000>;
789 regulator-always-on;
790 };
791 };
792 };
793};
794
795&hsi2c_4 {
796 status = "okay";
797
798 s3fwrn5: nfc@27 {
799 compatible = "samsung,s3fwrn5-i2c";
800 reg = <0x27>;
801 interrupt-parent = <&gpa1>;
802 interrupts = <3 IRQ_TYPE_EDGE_RISING>;
803 en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>;
804 wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
805 };
806};
807
808&hsi2c_5 {
809 status = "okay";
810
811 stmfts: touchscreen@49 {
812 compatible = "st,stmfts";
813 reg = <0x49>;
814 interrupt-parent = <&gpa1>;
815 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
816 avdd-supply = <&ldo30_reg>;
817 vdd-supply = <&ldo31_reg>;
818 };
819};
820
821&hsi2c_7 {
822 status = "okay";
823 clock-frequency = <1000000>;
824
825 bridge@39 {
826 reg = <0x39>;
827 compatible = "sil,sii8620";
828 cvcc10-supply = <&ldo36_reg>;
829 iovcc18-supply = <&ldo34_reg>;
830 interrupt-parent = <&gpf0>;
831 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
832 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
833 clocks = <&pmu_system_controller 0>;
834 clock-names = "xtal";
835
836 ports {
837 #address-cells = <1>;
838 #size-cells = <0>;
839
840 port@0 {
841 reg = <0>;
842 mhl_to_hdmi: endpoint {
843 remote-endpoint = <&hdmi_to_mhl>;
844 };
845 };
846
847 port@1 {
848 reg = <1>;
849 mhl_to_musb_con: endpoint {
850 remote-endpoint = <&musb_con_to_mhl>;
851 };
852 };
853 };
854 };
855};
856
857&hsi2c_8 {
858 status = "okay";
859
860 pmic@66 {
861 compatible = "maxim,max77843";
862 interrupt-parent = <&gpa1>;
863 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
864 reg = <0x66>;
865
866 muic: extcon {
867 compatible = "maxim,max77843-muic";
868
869 musb_con: connector {
870 compatible = "samsung,usb-connector-11pin",
871 "usb-b-connector";
872 label = "micro-USB";
873 type = "micro";
874
875 ports {
876 #address-cells = <1>;
877 #size-cells = <0>;
878
879 port@0 {
880 /*
881 * TODO: The DTS this is based on does not have
882 * port@0 which is a required property. The ports
883 * look incomplete and need fixing.
884 * Add a disabled port just to satisfy dtschema.
885 */
886 reg = <0>;
887 status = "disabled";
888 };
889
890 port@3 {
891 reg = <3>;
892 musb_con_to_mhl: endpoint {
893 remote-endpoint = <&mhl_to_musb_con>;
894 };
895 };
896 };
897 };
898
899 ports {
900 port {
901 muic_to_usb: endpoint {
902 remote-endpoint = <&usb_to_muic>;
903 };
904 };
905 };
906 };
907
908 regulators {
909 compatible = "maxim,max77843-regulator";
910 safeout1_reg: SAFEOUT1 {
911 regulator-name = "SAFEOUT1";
912 regulator-min-microvolt = <3300000>;
913 regulator-max-microvolt = <4950000>;
914 };
915
916 safeout2_reg: SAFEOUT2 {
917 regulator-name = "SAFEOUT2";
918 regulator-min-microvolt = <3300000>;
919 regulator-max-microvolt = <4950000>;
920 };
921
922 charger_reg: CHARGER {
923 regulator-name = "CHARGER";
924 regulator-min-microamp = <100000>;
925 regulator-max-microamp = <3150000>;
926 };
927 };
928
929 haptic: motor-driver {
930 compatible = "maxim,max77843-haptic";
931 haptic-supply = <&ldo38_reg>;
932 pwms = <&pwm 0 33670 0>;
933 };
934 };
935};
936
937&hsi2c_11 {
938 status = "okay";
939};
940
941&i2s0 {
942 status = "okay";
943};
944
945&i2s1 {
946 assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
947 assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
948 status = "okay";
949};
950
951&mshc_0 {
952 status = "okay";
953 mmc-ddr-1_8v;
954 mmc-hs200-1_8v;
955 mmc-hs400-1_8v;
956 cap-mmc-highspeed;
957 non-removable;
958 card-detect-delay = <200>;
959 samsung,dw-mshc-ciu-div = <3>;
960 samsung,dw-mshc-sdr-timing = <0 4>;
961 samsung,dw-mshc-ddr-timing = <0 2>;
962 samsung,dw-mshc-hs400-timing = <0 3>;
963 samsung,read-strobe-delay = <90>;
964 fifo-depth = <0x80>;
965 pinctrl-names = "default";
966 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
967 &sd0_bus8 &sd0_rdqs>;
968 bus-width = <8>;
969 assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
970 assigned-clock-rates = <800000000>;
971};
972
973&mshc_2 {
974 status = "okay";
975 cap-sd-highspeed;
976 disable-wp;
977 cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
978 card-detect-delay = <200>;
979 samsung,dw-mshc-ciu-div = <3>;
980 samsung,dw-mshc-sdr-timing = <0 4>;
981 samsung,dw-mshc-ddr-timing = <0 2>;
982 fifo-depth = <0x80>;
983 pinctrl-names = "default";
984 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
985 bus-width = <4>;
986};
987
988&pcie {
989 status = "okay";
990 pinctrl-names = "default";
991 pinctrl-0 = <&pcie_bus &pcie_wlanen>;
992 vdd10-supply = <&ldo6_reg>;
993 vdd18-supply = <&ldo7_reg>;
994 assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
995 <&cmu_top CLK_MOUT_SCLK_PCIE_100>;
996 assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
997 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
998 assigned-clock-rates = <0>, <100000000>;
999 interrupt-map-mask = <0 0 0 0>;
1000 interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
1001};
1002
1003&pcie_phy {
1004 status = "okay";
1005};
1006
1007&ppmu_d0_general {
1008 status = "okay";
1009 events {
1010 ppmu_event0_d0_general: ppmu-event0-d0-general {
1011 event-name = "ppmu-event0-d0-general";
1012 };
1013 };
1014};
1015
1016&ppmu_d1_general {
1017 status = "okay";
1018 events {
1019 ppmu_event0_d1_general: ppmu-event0-d1-general {
1020 event-name = "ppmu-event0-d1-general";
1021 };
1022 };
1023};
1024
1025&pinctrl_alive {
1026 pinctrl-names = "default";
1027 pinctrl-0 = <&initial_alive>;
1028
1029 initial_alive: initial-state {
1030 PIN_IN(gpa0-0, DOWN, FAST_SR1);
1031 PIN_IN(gpa0-1, NONE, FAST_SR1);
1032 PIN_IN(gpa0-2, DOWN, FAST_SR1);
1033 PIN_IN(gpa0-3, NONE, FAST_SR1);
1034 PIN_IN(gpa0-4, NONE, FAST_SR1);
1035 PIN_IN(gpa0-5, DOWN, FAST_SR1);
1036 PIN_IN(gpa0-6, NONE, FAST_SR1);
1037 PIN_IN(gpa0-7, NONE, FAST_SR1);
1038
1039 PIN_IN(gpa1-0, UP, FAST_SR1);
1040 PIN_IN(gpa1-1, UP, FAST_SR1);
1041 PIN_IN(gpa1-2, NONE, FAST_SR1);
1042 PIN_IN(gpa1-3, DOWN, FAST_SR1);
1043 PIN_IN(gpa1-4, DOWN, FAST_SR1);
1044 PIN_IN(gpa1-5, NONE, FAST_SR1);
1045 PIN_IN(gpa1-6, NONE, FAST_SR1);
1046 PIN_IN(gpa1-7, NONE, FAST_SR1);
1047
1048 PIN_IN(gpa2-0, NONE, FAST_SR1);
1049 PIN_IN(gpa2-1, NONE, FAST_SR1);
1050 PIN_IN(gpa2-2, NONE, FAST_SR1);
1051 PIN_IN(gpa2-3, DOWN, FAST_SR1);
1052 PIN_IN(gpa2-4, NONE, FAST_SR1);
1053 PIN_IN(gpa2-5, DOWN, FAST_SR1);
1054 PIN_IN(gpa2-6, DOWN, FAST_SR1);
1055 PIN_IN(gpa2-7, NONE, FAST_SR1);
1056
1057 PIN_IN(gpa3-0, DOWN, FAST_SR1);
1058 PIN_IN(gpa3-1, DOWN, FAST_SR1);
1059 PIN_IN(gpa3-2, NONE, FAST_SR1);
1060 PIN_IN(gpa3-3, DOWN, FAST_SR1);
1061 PIN_IN(gpa3-4, NONE, FAST_SR1);
1062 PIN_IN(gpa3-5, DOWN, FAST_SR1);
1063 PIN_IN(gpa3-6, DOWN, FAST_SR1);
1064 PIN_IN(gpa3-7, DOWN, FAST_SR1);
1065
1066 PIN_IN(gpf1-0, NONE, FAST_SR1);
1067 PIN_IN(gpf1-1, NONE, FAST_SR1);
1068 PIN_IN(gpf1-2, DOWN, FAST_SR1);
1069 PIN_IN(gpf1-4, UP, FAST_SR1);
1070 PIN_OT(gpf1-5, NONE, FAST_SR1);
1071 PIN_IN(gpf1-6, DOWN, FAST_SR1);
1072 PIN_IN(gpf1-7, DOWN, FAST_SR1);
1073
1074 PIN_IN(gpf2-0, DOWN, FAST_SR1);
1075 PIN_IN(gpf2-1, DOWN, FAST_SR1);
1076 PIN_IN(gpf2-2, DOWN, FAST_SR1);
1077 PIN_IN(gpf2-3, DOWN, FAST_SR1);
1078
1079 PIN_IN(gpf3-0, DOWN, FAST_SR1);
1080 PIN_IN(gpf3-1, DOWN, FAST_SR1);
1081 PIN_IN(gpf3-2, NONE, FAST_SR1);
1082 PIN_IN(gpf3-3, DOWN, FAST_SR1);
1083
1084 PIN_IN(gpf4-0, DOWN, FAST_SR1);
1085 PIN_IN(gpf4-1, DOWN, FAST_SR1);
1086 PIN_IN(gpf4-2, DOWN, FAST_SR1);
1087 PIN_IN(gpf4-3, DOWN, FAST_SR1);
1088 PIN_IN(gpf4-4, DOWN, FAST_SR1);
1089 PIN_IN(gpf4-5, DOWN, FAST_SR1);
1090 PIN_IN(gpf4-6, DOWN, FAST_SR1);
1091 PIN_IN(gpf4-7, DOWN, FAST_SR1);
1092
1093 PIN_IN(gpf5-0, DOWN, FAST_SR1);
1094 PIN_IN(gpf5-1, DOWN, FAST_SR1);
1095 PIN_IN(gpf5-2, DOWN, FAST_SR1);
1096 PIN_IN(gpf5-3, DOWN, FAST_SR1);
1097 PIN_OT(gpf5-4, NONE, FAST_SR1);
1098 PIN_IN(gpf5-5, DOWN, FAST_SR1);
1099 PIN_IN(gpf5-6, DOWN, FAST_SR1);
1100 PIN_IN(gpf5-7, DOWN, FAST_SR1);
1101 };
1102
1103 te_irq: te-irq-pins {
1104 samsung,pins = "gpf1-3";
1105 samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
1106 };
1107};
1108
1109&pinctrl_cpif {
1110 pinctrl-names = "default";
1111 pinctrl-0 = <&initial_cpif>;
1112
1113 initial_cpif: initial-state {
1114 PIN_IN(gpv6-0, DOWN, FAST_SR1);
1115 PIN_IN(gpv6-1, DOWN, FAST_SR1);
1116 };
1117};
1118
1119&pinctrl_ese {
1120 pinctrl-names = "default";
1121 pinctrl-0 = <&initial_ese>;
1122
1123 pcie_wlanen: pcie-wlanen-pins {
1124 samsung,pins = "gpj2-0";
1125 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
1126 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
1127 samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
1128 };
1129
1130 initial_ese: initial-state {
1131 PIN_IN(gpj2-1, DOWN, FAST_SR1);
1132 PIN_IN(gpj2-2, DOWN, FAST_SR1);
1133 };
1134};
1135
1136&pinctrl_fsys {
1137 pinctrl-names = "default";
1138 pinctrl-0 = <&initial_fsys>;
1139
1140 initial_fsys: initial-state {
1141 PIN_IN(gpr3-0, NONE, FAST_SR1);
1142 PIN_IN(gpr3-1, DOWN, FAST_SR1);
1143 PIN_IN(gpr3-2, DOWN, FAST_SR1);
1144 PIN_IN(gpr3-3, DOWN, FAST_SR1);
1145 PIN_IN(gpr3-7, NONE, FAST_SR1);
1146 };
1147};
1148
1149&pinctrl_imem {
1150 pinctrl-names = "default";
1151 pinctrl-0 = <&initial_imem>;
1152
1153 initial_imem: initial-state {
1154 PIN_IN(gpf0-0, UP, FAST_SR1);
1155 PIN_IN(gpf0-1, UP, FAST_SR1);
1156 PIN_IN(gpf0-2, DOWN, FAST_SR1);
1157 PIN_IN(gpf0-3, UP, FAST_SR1);
1158 PIN_IN(gpf0-4, DOWN, FAST_SR1);
1159 PIN_IN(gpf0-5, NONE, FAST_SR1);
1160 PIN_IN(gpf0-6, DOWN, FAST_SR1);
1161 PIN_IN(gpf0-7, UP, FAST_SR1);
1162 };
1163};
1164
1165&pinctrl_nfc {
1166 pinctrl-names = "default";
1167 pinctrl-0 = <&initial_nfc>;
1168
1169 initial_nfc: initial-state {
1170 PIN_IN(gpj0-2, DOWN, FAST_SR1);
1171 };
1172};
1173
1174&pinctrl_peric {
1175 pinctrl-names = "default";
1176 pinctrl-0 = <&initial_peric>;
1177
1178 initial_peric: initial-state {
1179 PIN_IN(gpv7-0, DOWN, FAST_SR1);
1180 PIN_IN(gpv7-1, DOWN, FAST_SR1);
1181 PIN_IN(gpv7-2, NONE, FAST_SR1);
1182 PIN_IN(gpv7-3, DOWN, FAST_SR1);
1183 PIN_IN(gpv7-4, DOWN, FAST_SR1);
1184 PIN_IN(gpv7-5, DOWN, FAST_SR1);
1185
1186 PIN_IN(gpb0-4, DOWN, FAST_SR1);
1187
1188 PIN_IN(gpc0-2, DOWN, FAST_SR1);
1189 PIN_IN(gpc0-5, DOWN, FAST_SR1);
1190 PIN_IN(gpc0-7, DOWN, FAST_SR1);
1191
1192 PIN_IN(gpc1-1, DOWN, FAST_SR1);
1193
1194 PIN_IN(gpc3-4, NONE, FAST_SR1);
1195 PIN_IN(gpc3-5, NONE, FAST_SR1);
1196 PIN_IN(gpc3-6, NONE, FAST_SR1);
1197 PIN_IN(gpc3-7, NONE, FAST_SR1);
1198
1199 PIN_OT(gpg0-0, NONE, FAST_SR1);
1200 PIN_F2(gpg0-1, DOWN, FAST_SR1);
1201
1202 PIN_IN(gpd2-5, DOWN, FAST_SR1);
1203
1204 PIN_IN(gpd4-0, NONE, FAST_SR1);
1205 PIN_IN(gpd4-1, DOWN, FAST_SR1);
1206 PIN_IN(gpd4-2, DOWN, FAST_SR1);
1207 PIN_IN(gpd4-3, DOWN, FAST_SR1);
1208 PIN_IN(gpd4-4, DOWN, FAST_SR1);
1209
1210 PIN_IN(gpd6-3, DOWN, FAST_SR1);
1211
1212 PIN_IN(gpd8-1, UP, FAST_SR1);
1213
1214 PIN_IN(gpg1-0, DOWN, FAST_SR1);
1215 PIN_IN(gpg1-1, DOWN, FAST_SR1);
1216 PIN_IN(gpg1-2, DOWN, FAST_SR1);
1217 PIN_IN(gpg1-3, DOWN, FAST_SR1);
1218 PIN_IN(gpg1-4, DOWN, FAST_SR1);
1219
1220 PIN_IN(gpg2-0, DOWN, FAST_SR1);
1221 PIN_IN(gpg2-1, DOWN, FAST_SR1);
1222
1223 PIN_IN(gpg3-0, DOWN, FAST_SR1);
1224 PIN_IN(gpg3-1, DOWN, FAST_SR1);
1225 PIN_IN(gpg3-5, DOWN, FAST_SR1);
1226 };
1227};
1228
1229&pinctrl_touch {
1230 pinctrl-names = "default";
1231 pinctrl-0 = <&initial_touch>;
1232
1233 initial_touch: initial-state {
1234 PIN_IN(gpj1-2, DOWN, FAST_SR1);
1235 };
1236};
1237
1238&pwm {
1239 pinctrl-0 = <&pwm0_out>;
1240 pinctrl-names = "default";
1241 status = "okay";
1242};
1243
1244&mic {
1245 status = "okay";
1246};
1247
1248&pmu_system_controller {
1249 assigned-clocks = <&pmu_system_controller 0>;
1250 assigned-clock-parents = <&xxti>;
1251};
1252
1253&serial_1 {
1254 status = "okay";
1255};
1256
1257&serial_3 {
1258 status = "okay";
1259
1260 bluetooth {
1261 compatible = "brcm,bcm43438-bt";
1262 max-speed = <3000000>;
1263 shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
1264 device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>;
1265 host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>;
1266 clocks = <&s2mps13_osc S2MPS11_CLK_BT>;
1267 clock-names = "extclk";
1268 };
1269};
1270
1271&spi_1 {
1272 cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
1273 status = "okay";
1274
1275 wm5110: audio-codec@0 {
1276 compatible = "wlf,wm5110";
1277 reg = <0x0>;
1278 spi-max-frequency = <20000000>;
1279 interrupt-parent = <&gpa0>;
1280 interrupts = <4 IRQ_TYPE_NONE>;
1281 clocks = <&pmu_system_controller 0>,
1282 <&s2mps13_osc S2MPS11_CLK_BT>;
1283 clock-names = "mclk1", "mclk2";
1284
1285 gpio-controller;
1286 #gpio-cells = <2>;
1287 interrupt-controller;
1288 #interrupt-cells = <2>;
1289
1290 wlf,micd-detect-debounce = <300>;
1291 wlf,micd-bias-start-time = <0x1>;
1292 wlf,micd-rate = <0x7>;
1293 wlf,micd-dbtime = <0x2>;
1294 wlf,micd-force-micbias;
1295 wlf,micd-configs = <0x0 1 0>;
1296 wlf,hpdet-channel = <1>;
1297 wlf,gpsw = <0x1>;
1298 wlf,inmode = <2 0 2 0>;
1299
1300 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
1301 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1302
1303 /* core supplies */
1304 AVDD-supply = <&ldo18_reg>;
1305 DBVDD1-supply = <&ldo18_reg>;
1306 CPVDD-supply = <&ldo18_reg>;
1307 DBVDD2-supply = <&ldo18_reg>;
1308 DBVDD3-supply = <&ldo18_reg>;
1309 SPKVDDL-supply = <&vph_pwr_regulator>;
1310 SPKVDDR-supply = <&vph_pwr_regulator>;
1311
1312 controller-data {
1313 samsung,spi-feedback-delay = <0>;
1314 };
1315 };
1316};
1317
1318&spi_3 {
1319 status = "okay";
1320 no-cs-readback;
1321
1322 irled@0 {
1323 compatible = "ir-spi-led";
1324 reg = <0x0>;
1325 spi-max-frequency = <5000000>;
1326 power-supply = <&irda_regulator>;
1327 duty-cycle = /bits/ 8 <60>;
1328 led-active-low;
1329
1330 controller-data {
1331 samsung,spi-feedback-delay = <0>;
1332 };
1333 };
1334};
1335
1336&timer {
1337 clock-frequency = <24000000>;
1338};
1339
1340&tmu_atlas0 {
1341 vtmu-supply = <&ldo3_reg>;
1342 status = "okay";
1343};
1344
1345&tmu_apollo {
1346 vtmu-supply = <&ldo3_reg>;
1347 status = "okay";
1348};
1349
1350&tmu_g3d {
1351 vtmu-supply = <&ldo3_reg>;
1352 status = "okay";
1353};
1354
1355&usbdrd30 {
1356 vdd33-supply = <&ldo10_reg>;
1357 vdd10-supply = <&ldo6_reg>;
1358 status = "okay";
1359};
1360
1361&usbdrd_dwc3 {
1362 dr_mode = "otg";
1363};
1364
1365&usbdrd30_phy {
1366 vbus-supply = <&safeout1_reg>;
1367 status = "okay";
1368
1369 port {
1370 usb_to_muic: endpoint {
1371 remote-endpoint = <&muic_to_usb>;
1372 };
1373 };
1374};
1375
1376&xxti {
1377 clock-frequency = <24000000>;
1378};