Aaron Williams | 943b13a | 2020-12-11 17:06:04 +0100 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2020 Marvell International Ltd. |
| 4 | * |
| 5 | * Helper utilities for qlm. |
| 6 | */ |
| 7 | |
| 8 | #include <log.h> |
| 9 | #include <time.h> |
| 10 | #include <asm/global_data.h> |
| 11 | #include <linux/delay.h> |
| 12 | |
| 13 | #include <mach/cvmx-regs.h> |
| 14 | #include <mach/octeon-model.h> |
| 15 | #include <mach/cvmx-fuse.h> |
| 16 | #include <mach/octeon-feature.h> |
| 17 | #include <mach/cvmx-qlm.h> |
| 18 | #include <mach/octeon_qlm.h> |
| 19 | #include <mach/cvmx-pcie.h> |
| 20 | #include <mach/cvmx-helper.h> |
| 21 | #include <mach/cvmx-helper-util.h> |
| 22 | #include <mach/cvmx-bgxx-defs.h> |
| 23 | #include <mach/cvmx-ciu-defs.h> |
| 24 | #include <mach/cvmx-gmxx-defs.h> |
| 25 | #include <mach/cvmx-gserx-defs.h> |
| 26 | #include <mach/cvmx-mio-defs.h> |
| 27 | #include <mach/cvmx-pciercx-defs.h> |
| 28 | #include <mach/cvmx-pemx-defs.h> |
| 29 | #include <mach/cvmx-pexp-defs.h> |
| 30 | #include <mach/cvmx-rst-defs.h> |
| 31 | #include <mach/cvmx-sata-defs.h> |
| 32 | #include <mach/cvmx-sli-defs.h> |
| 33 | #include <mach/cvmx-sriomaintx-defs.h> |
| 34 | #include <mach/cvmx-sriox-defs.h> |
| 35 | |
| 36 | #include <mach/cvmx-helper.h> |
| 37 | #include <mach/cvmx-helper-jtag.h> |
| 38 | |
| 39 | DECLARE_GLOBAL_DATA_PTR; |
| 40 | |
| 41 | /* |
| 42 | * Their is a copy of this in bootloader qlm configuration, make sure |
| 43 | * to update both the places till i figure out |
| 44 | */ |
| 45 | #define R_25G_REFCLK100 0x0 |
| 46 | #define R_5G_REFCLK100 0x1 |
| 47 | #define R_8G_REFCLK100 0x2 |
| 48 | #define R_125G_REFCLK15625_KX 0x3 |
| 49 | #define R_3125G_REFCLK15625_XAUI 0x4 |
| 50 | #define R_103125G_REFCLK15625_KR 0x5 |
| 51 | #define R_125G_REFCLK15625_SGMII 0x6 |
| 52 | #define R_5G_REFCLK15625_QSGMII 0x7 |
| 53 | #define R_625G_REFCLK15625_RXAUI 0x8 |
| 54 | #define R_25G_REFCLK125 0x9 |
| 55 | #define R_5G_REFCLK125 0xa |
| 56 | #define R_8G_REFCLK125 0xb |
| 57 | |
| 58 | static const int REF_100MHZ = 100000000; |
| 59 | static const int REF_125MHZ = 125000000; |
| 60 | static const int REF_156MHZ = 156250000; |
| 61 | |
| 62 | static qlm_jtag_uint32_t *__cvmx_qlm_jtag_xor_ref; |
| 63 | |
| 64 | /** |
| 65 | * Return the number of QLMs supported by the chip |
| 66 | * |
| 67 | * @return Number of QLMs |
| 68 | */ |
| 69 | int cvmx_qlm_get_num(void) |
| 70 | { |
| 71 | if (OCTEON_IS_MODEL(OCTEON_CN68XX)) |
| 72 | return 5; |
| 73 | else if (OCTEON_IS_MODEL(OCTEON_CN66XX)) |
| 74 | return 3; |
| 75 | else if (OCTEON_IS_MODEL(OCTEON_CN63XX)) |
| 76 | return 3; |
| 77 | else if (OCTEON_IS_MODEL(OCTEON_CN61XX)) |
| 78 | return 3; |
| 79 | else if (OCTEON_IS_MODEL(OCTEON_CNF71XX)) |
| 80 | return 2; |
| 81 | else if (OCTEON_IS_MODEL(OCTEON_CN78XX)) |
| 82 | return 8; |
| 83 | else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) |
| 84 | return 7; |
| 85 | else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) |
| 86 | return 9; |
| 87 | return 0; |
| 88 | } |
| 89 | |
| 90 | /** |
| 91 | * Return the qlm number based on the interface |
| 92 | * |
| 93 | * @param xiface interface to look up |
| 94 | * |
| 95 | * @return the qlm number based on the xiface |
| 96 | */ |
| 97 | int cvmx_qlm_interface(int xiface) |
| 98 | { |
| 99 | struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); |
| 100 | |
| 101 | if (OCTEON_IS_MODEL(OCTEON_CN61XX)) { |
| 102 | return (xi.interface == 0) ? 2 : 0; |
| 103 | } else if (OCTEON_IS_MODEL(OCTEON_CN63XX) || OCTEON_IS_MODEL(OCTEON_CN66XX)) { |
| 104 | return 2 - xi.interface; |
| 105 | } else if (OCTEON_IS_MODEL(OCTEON_CNF71XX)) { |
| 106 | if (xi.interface == 0) |
| 107 | return 0; |
| 108 | |
| 109 | debug("Warning: %s: Invalid interface %d\n", |
| 110 | __func__, xi.interface); |
| 111 | } else if (octeon_has_feature(OCTEON_FEATURE_BGX)) { |
| 112 | debug("Warning: not supported\n"); |
| 113 | return -1; |
| 114 | } |
| 115 | |
| 116 | /* Must be cn68XX */ |
| 117 | switch (xi.interface) { |
| 118 | case 1: |
| 119 | return 0; |
| 120 | default: |
| 121 | return xi.interface; |
| 122 | } |
| 123 | |
| 124 | return -1; |
| 125 | } |
| 126 | |
| 127 | /** |
| 128 | * Return the qlm number based for a port in the interface |
| 129 | * |
| 130 | * @param xiface interface to look up |
| 131 | * @param index index in an interface |
| 132 | * |
| 133 | * @return the qlm number based on the xiface |
| 134 | */ |
| 135 | int cvmx_qlm_lmac(int xiface, int index) |
| 136 | { |
| 137 | struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); |
| 138 | |
| 139 | if (OCTEON_IS_MODEL(OCTEON_CN78XX)) { |
| 140 | cvmx_bgxx_cmr_global_config_t gconfig; |
| 141 | cvmx_gserx_phy_ctl_t phy_ctl; |
| 142 | cvmx_gserx_cfg_t gserx_cfg; |
| 143 | int qlm; |
| 144 | |
| 145 | if (xi.interface < 6) { |
| 146 | if (xi.interface < 2) { |
| 147 | gconfig.u64 = |
| 148 | csr_rd_node(xi.node, |
| 149 | CVMX_BGXX_CMR_GLOBAL_CONFIG(xi.interface)); |
| 150 | if (gconfig.s.pmux_sds_sel) |
| 151 | qlm = xi.interface + 2; /* QLM 2 or 3 */ |
| 152 | else |
| 153 | qlm = xi.interface; /* QLM 0 or 1 */ |
| 154 | } else { |
| 155 | qlm = xi.interface + 2; /* QLM 4-7 */ |
| 156 | } |
| 157 | |
| 158 | /* make sure the QLM is powered up and out of reset */ |
| 159 | phy_ctl.u64 = csr_rd_node(xi.node, CVMX_GSERX_PHY_CTL(qlm)); |
| 160 | if (phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) |
| 161 | return -1; |
| 162 | gserx_cfg.u64 = csr_rd_node(xi.node, CVMX_GSERX_CFG(qlm)); |
| 163 | if (gserx_cfg.s.bgx) |
| 164 | return qlm; |
| 165 | else |
| 166 | return -1; |
| 167 | } else if (xi.interface <= 7) { /* ILK */ |
| 168 | int qlm; |
| 169 | |
| 170 | for (qlm = 4; qlm < 8; qlm++) { |
| 171 | /* Make sure the QLM is powered and out of reset */ |
| 172 | phy_ctl.u64 = csr_rd_node(xi.node, CVMX_GSERX_PHY_CTL(qlm)); |
| 173 | if (phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) |
| 174 | continue; |
| 175 | /* Make sure the QLM is in ILK mode */ |
| 176 | gserx_cfg.u64 = csr_rd_node(xi.node, CVMX_GSERX_CFG(qlm)); |
| 177 | if (gserx_cfg.s.ila) |
| 178 | return qlm; |
| 179 | } |
| 180 | } |
| 181 | return -1; |
| 182 | } else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) { |
| 183 | cvmx_gserx_phy_ctl_t phy_ctl; |
| 184 | cvmx_gserx_cfg_t gserx_cfg; |
| 185 | int qlm; |
| 186 | |
| 187 | /* (interface)0->QLM2, 1->QLM3, 2->DLM5/3->DLM6 */ |
| 188 | if (xi.interface < 2) { |
| 189 | qlm = xi.interface + 2; /* (0,1)->ret(2,3) */ |
| 190 | |
| 191 | phy_ctl.u64 = csr_rd(CVMX_GSERX_PHY_CTL(qlm)); |
| 192 | if (phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) |
| 193 | return -1; |
| 194 | |
| 195 | gserx_cfg.u64 = csr_rd(CVMX_GSERX_CFG(qlm)); |
| 196 | if (gserx_cfg.s.bgx) |
| 197 | return qlm; |
| 198 | else |
| 199 | return -1; |
| 200 | } else if (xi.interface == 2) { |
| 201 | cvmx_gserx_cfg_t g1, g2; |
| 202 | |
| 203 | g1.u64 = csr_rd(CVMX_GSERX_CFG(5)); |
| 204 | g2.u64 = csr_rd(CVMX_GSERX_CFG(6)); |
| 205 | /* Check if both QLM5 & QLM6 are BGX2 */ |
| 206 | if (g2.s.bgx) { |
| 207 | if (g1.s.bgx) { |
| 208 | cvmx_gserx_phy_ctl_t phy_ctl1; |
| 209 | |
| 210 | phy_ctl.u64 = csr_rd(CVMX_GSERX_PHY_CTL(5)); |
| 211 | phy_ctl1.u64 = csr_rd(CVMX_GSERX_PHY_CTL(6)); |
| 212 | if ((phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) && |
| 213 | (phy_ctl1.s.phy_pd || phy_ctl1.s.phy_reset)) |
| 214 | return -1; |
| 215 | if (index >= 2) |
| 216 | return 6; |
| 217 | return 5; |
| 218 | } else { /* QLM6 is BGX2 */ |
| 219 | phy_ctl.u64 = csr_rd(CVMX_GSERX_PHY_CTL(6)); |
| 220 | if (phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) |
| 221 | return -1; |
| 222 | return 6; |
| 223 | } |
| 224 | } else if (g1.s.bgx) { |
| 225 | phy_ctl.u64 = csr_rd(CVMX_GSERX_PHY_CTL(5)); |
| 226 | if (phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) |
| 227 | return -1; |
| 228 | return 5; |
| 229 | } |
| 230 | } |
| 231 | return -1; |
| 232 | } else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) { |
| 233 | cvmx_gserx_phy_ctl_t phy_ctl; |
| 234 | cvmx_gserx_cfg_t gserx_cfg; |
| 235 | int qlm; |
| 236 | |
| 237 | if (xi.interface == 0) { |
| 238 | cvmx_gserx_cfg_t g1, g2; |
| 239 | |
| 240 | g1.u64 = csr_rd(CVMX_GSERX_CFG(4)); |
| 241 | g2.u64 = csr_rd(CVMX_GSERX_CFG(5)); |
| 242 | /* Check if both QLM4 & QLM5 are BGX0 */ |
| 243 | if (g2.s.bgx) { |
| 244 | if (g1.s.bgx) { |
| 245 | cvmx_gserx_phy_ctl_t phy_ctl1; |
| 246 | |
| 247 | phy_ctl.u64 = csr_rd(CVMX_GSERX_PHY_CTL(4)); |
| 248 | phy_ctl1.u64 = csr_rd(CVMX_GSERX_PHY_CTL(5)); |
| 249 | if ((phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) && |
| 250 | (phy_ctl1.s.phy_pd || phy_ctl1.s.phy_reset)) |
| 251 | return -1; |
| 252 | if (index >= 2) |
| 253 | return 5; |
| 254 | return 4; |
| 255 | } |
| 256 | |
| 257 | /* QLM5 is BGX0 */ |
| 258 | phy_ctl.u64 = csr_rd(CVMX_GSERX_PHY_CTL(5)); |
| 259 | if (phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) |
| 260 | return -1; |
| 261 | return 5; |
| 262 | } else if (g1.s.bgx) { |
| 263 | phy_ctl.u64 = csr_rd(CVMX_GSERX_PHY_CTL(4)); |
| 264 | if (phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) |
| 265 | return -1; |
| 266 | return 4; |
| 267 | } |
| 268 | } else if (xi.interface < 2) { |
| 269 | qlm = (xi.interface == 1) ? 2 : 3; |
| 270 | gserx_cfg.u64 = csr_rd(CVMX_GSERX_CFG(qlm)); |
| 271 | if (gserx_cfg.s.srio) |
| 272 | return qlm; |
| 273 | } |
| 274 | return -1; |
| 275 | } |
| 276 | return -1; |
| 277 | } |
| 278 | |
| 279 | /** |
| 280 | * Return if only DLM5/DLM6/DLM5+DLM6 is used by BGX |
| 281 | * |
| 282 | * @param BGX BGX to search for. |
| 283 | * |
| 284 | * @return muxes used 0 = DLM5+DLM6, 1 = DLM5, 2 = DLM6. |
| 285 | */ |
| 286 | int cvmx_qlm_mux_interface(int bgx) |
| 287 | { |
| 288 | int mux = 0; |
| 289 | cvmx_gserx_cfg_t gser1, gser2; |
| 290 | int qlm1, qlm2; |
| 291 | |
| 292 | if (OCTEON_IS_MODEL(OCTEON_CN73XX) && bgx != 2) |
| 293 | return -1; |
| 294 | else if (OCTEON_IS_MODEL(OCTEON_CNF75XX) && bgx != 0) |
| 295 | return -1; |
| 296 | |
| 297 | if (OCTEON_IS_MODEL(OCTEON_CN73XX)) { |
| 298 | qlm1 = 5; |
| 299 | qlm2 = 6; |
| 300 | } else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) { |
| 301 | qlm1 = 4; |
| 302 | qlm2 = 5; |
| 303 | } else { |
| 304 | return -1; |
| 305 | } |
| 306 | |
| 307 | gser1.u64 = csr_rd(CVMX_GSERX_CFG(qlm1)); |
| 308 | gser2.u64 = csr_rd(CVMX_GSERX_CFG(qlm2)); |
| 309 | |
| 310 | if (gser1.s.bgx && gser2.s.bgx) |
| 311 | mux = 0; |
| 312 | else if (gser1.s.bgx) |
| 313 | mux = 1; // BGX2 is using DLM5 only |
| 314 | else if (gser2.s.bgx) |
| 315 | mux = 2; // BGX2 is using DLM6 only |
| 316 | |
| 317 | return mux; |
| 318 | } |
| 319 | |
| 320 | /** |
| 321 | * Return number of lanes for a given qlm |
| 322 | * |
| 323 | * @param qlm QLM to examine |
| 324 | * |
| 325 | * @return Number of lanes |
| 326 | */ |
| 327 | int cvmx_qlm_get_lanes(int qlm) |
| 328 | { |
| 329 | if (OCTEON_IS_MODEL(OCTEON_CN61XX) && qlm == 1) |
| 330 | return 2; |
| 331 | else if (OCTEON_IS_MODEL(OCTEON_CNF71XX)) |
| 332 | return 2; |
| 333 | else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) |
| 334 | return (qlm < 4) ? 4 /*QLM0,1,2,3*/ : 2 /*DLM4,5,6*/; |
| 335 | else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) |
| 336 | return (qlm == 2 || qlm == 3) ? 4 /*QLM2,3*/ : 2 /*DLM0,1,4,5*/; |
| 337 | return 4; |
| 338 | } |
| 339 | |
| 340 | /** |
| 341 | * Get the QLM JTAG fields based on Octeon model on the supported chips. |
| 342 | * |
| 343 | * @return qlm_jtag_field_t structure |
| 344 | */ |
| 345 | const __cvmx_qlm_jtag_field_t *cvmx_qlm_jtag_get_field(void) |
| 346 | { |
| 347 | /* Figure out which JTAG chain description we're using */ |
| 348 | if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { |
| 349 | return __cvmx_qlm_jtag_field_cn68xx; |
| 350 | } else if (OCTEON_IS_MODEL(OCTEON_CN66XX) || OCTEON_IS_MODEL(OCTEON_CN61XX) || |
| 351 | OCTEON_IS_MODEL(OCTEON_CNF71XX)) { |
| 352 | return __cvmx_qlm_jtag_field_cn66xx; |
| 353 | } else if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { |
| 354 | return __cvmx_qlm_jtag_field_cn63xx; |
| 355 | } |
| 356 | |
| 357 | return NULL; |
| 358 | } |
| 359 | |
| 360 | /** |
| 361 | * Get the QLM JTAG length by going through qlm_jtag_field for each |
| 362 | * Octeon model that is supported |
| 363 | * |
| 364 | * @return return the length. |
| 365 | */ |
| 366 | int cvmx_qlm_jtag_get_length(void) |
| 367 | { |
| 368 | const __cvmx_qlm_jtag_field_t *qlm_ptr = cvmx_qlm_jtag_get_field(); |
| 369 | int length = 0; |
| 370 | |
| 371 | /* Figure out how many bits are in the JTAG chain */ |
| 372 | while (qlm_ptr && qlm_ptr->name) { |
| 373 | if (qlm_ptr->stop_bit > length) |
| 374 | length = qlm_ptr->stop_bit + 1; |
| 375 | qlm_ptr++; |
| 376 | } |
| 377 | return length; |
| 378 | } |
| 379 | |
| 380 | /** |
| 381 | * Initialize the QLM layer |
| 382 | */ |
| 383 | void cvmx_qlm_init(void) |
| 384 | { |
| 385 | if (OCTEON_IS_OCTEON3()) |
| 386 | return; |
| 387 | |
| 388 | /* ToDo: No support for non-Octeon 3 yet */ |
| 389 | printf("Please add support for unsupported Octeon SoC\n"); |
| 390 | } |
| 391 | |
| 392 | /** |
| 393 | * Lookup the bit information for a JTAG field name |
| 394 | * |
| 395 | * @param name Name to lookup |
| 396 | * |
| 397 | * @return Field info, or NULL on failure |
| 398 | */ |
| 399 | static const __cvmx_qlm_jtag_field_t *__cvmx_qlm_lookup_field(const char *name) |
| 400 | { |
| 401 | const __cvmx_qlm_jtag_field_t *ptr = cvmx_qlm_jtag_get_field(); |
| 402 | |
| 403 | while (ptr->name) { |
| 404 | if (strcmp(name, ptr->name) == 0) |
| 405 | return ptr; |
| 406 | ptr++; |
| 407 | } |
| 408 | |
| 409 | debug("%s: Illegal field name %s\n", __func__, name); |
| 410 | return NULL; |
| 411 | } |
| 412 | |
| 413 | /** |
| 414 | * Get a field in a QLM JTAG chain |
| 415 | * |
| 416 | * @param qlm QLM to get |
| 417 | * @param lane Lane in QLM to get |
| 418 | * @param name String name of field |
| 419 | * |
| 420 | * @return JTAG field value |
| 421 | */ |
| 422 | uint64_t cvmx_qlm_jtag_get(int qlm, int lane, const char *name) |
| 423 | { |
| 424 | const __cvmx_qlm_jtag_field_t *field = __cvmx_qlm_lookup_field(name); |
| 425 | int qlm_jtag_length = cvmx_qlm_jtag_get_length(); |
| 426 | int num_lanes = cvmx_qlm_get_lanes(qlm); |
| 427 | |
| 428 | if (!field) |
| 429 | return 0; |
| 430 | |
| 431 | /* Capture the current settings */ |
| 432 | cvmx_helper_qlm_jtag_capture(qlm); |
| 433 | /* |
| 434 | * Shift past lanes we don't care about. CN6XXX/7XXX shifts lane 0 first, |
| 435 | * CN3XXX/5XXX shifts lane 3 first |
| 436 | */ |
| 437 | /* Shift to the start of the field */ |
| 438 | cvmx_helper_qlm_jtag_shift_zeros(qlm, |
| 439 | qlm_jtag_length * (num_lanes - 1 - lane)); |
| 440 | cvmx_helper_qlm_jtag_shift_zeros(qlm, field->start_bit); |
| 441 | /* Shift out the value and return it */ |
| 442 | return cvmx_helper_qlm_jtag_shift(qlm, field->stop_bit - field->start_bit + 1, 0); |
| 443 | } |
| 444 | |
| 445 | /** |
| 446 | * Set a field in a QLM JTAG chain |
| 447 | * |
| 448 | * @param qlm QLM to set |
| 449 | * @param lane Lane in QLM to set, or -1 for all lanes |
| 450 | * @param name String name of field |
| 451 | * @param value Value of the field |
| 452 | */ |
| 453 | void cvmx_qlm_jtag_set(int qlm, int lane, const char *name, uint64_t value) |
| 454 | { |
| 455 | int i, l; |
| 456 | u32 shift_values[CVMX_QLM_JTAG_UINT32]; |
| 457 | int num_lanes = cvmx_qlm_get_lanes(qlm); |
| 458 | const __cvmx_qlm_jtag_field_t *field = __cvmx_qlm_lookup_field(name); |
| 459 | int qlm_jtag_length = cvmx_qlm_jtag_get_length(); |
| 460 | int total_length = qlm_jtag_length * num_lanes; |
| 461 | int bits = 0; |
| 462 | |
| 463 | if (!field) |
| 464 | return; |
| 465 | |
| 466 | /* Get the current state */ |
| 467 | cvmx_helper_qlm_jtag_capture(qlm); |
| 468 | for (i = 0; i < CVMX_QLM_JTAG_UINT32; i++) |
| 469 | shift_values[i] = cvmx_helper_qlm_jtag_shift(qlm, 32, 0); |
| 470 | |
| 471 | /* Put new data in our local array */ |
| 472 | for (l = 0; l < num_lanes; l++) { |
| 473 | u64 new_value = value; |
| 474 | int bits; |
| 475 | int adj_lanes; |
| 476 | |
| 477 | if (l != lane && lane != -1) |
| 478 | continue; |
| 479 | |
| 480 | adj_lanes = (num_lanes - 1 - l) * qlm_jtag_length; |
| 481 | |
| 482 | for (bits = field->start_bit + adj_lanes; bits <= field->stop_bit + adj_lanes; |
| 483 | bits++) { |
| 484 | if (new_value & 1) |
| 485 | shift_values[bits / 32] |= 1 << (bits & 31); |
| 486 | else |
| 487 | shift_values[bits / 32] &= ~(1 << (bits & 31)); |
| 488 | new_value >>= 1; |
| 489 | } |
| 490 | } |
| 491 | |
| 492 | /* Shift out data and xor with reference */ |
| 493 | while (bits < total_length) { |
| 494 | u32 shift = shift_values[bits / 32] ^ __cvmx_qlm_jtag_xor_ref[qlm][bits / 32]; |
| 495 | int width = total_length - bits; |
| 496 | |
| 497 | if (width > 32) |
| 498 | width = 32; |
| 499 | cvmx_helper_qlm_jtag_shift(qlm, width, shift); |
| 500 | bits += 32; |
| 501 | } |
| 502 | |
| 503 | /* Update the new data */ |
| 504 | cvmx_helper_qlm_jtag_update(qlm); |
| 505 | |
| 506 | /* |
| 507 | * Always give the QLM 1ms to settle after every update. This may not |
| 508 | * always be needed, but some of the options make significant |
| 509 | * electrical changes |
| 510 | */ |
| 511 | udelay(1000); |
| 512 | } |
| 513 | |
| 514 | /** |
| 515 | * Errata G-16094: QLM Gen2 Equalizer Default Setting Change. |
| 516 | * CN68XX pass 1.x and CN66XX pass 1.x QLM tweak. This function tweaks the |
| 517 | * JTAG setting for a QLMs to run better at 5 and 6.25Ghz. |
| 518 | */ |
| 519 | void __cvmx_qlm_speed_tweak(void) |
| 520 | { |
| 521 | cvmx_mio_qlmx_cfg_t qlm_cfg; |
| 522 | int num_qlms = cvmx_qlm_get_num(); |
| 523 | int qlm; |
| 524 | |
| 525 | /* Workaround for Errata (G-16467) */ |
| 526 | if (OCTEON_IS_MODEL(OCTEON_CN68XX_PASS2_X)) { |
| 527 | for (qlm = 0; qlm < num_qlms; qlm++) { |
| 528 | int ir50dac; |
| 529 | |
| 530 | /* |
| 531 | * This workaround only applies to QLMs running at |
| 532 | * 6.25Ghz |
| 533 | */ |
| 534 | if (cvmx_qlm_get_gbaud_mhz(qlm) == 6250) { |
| 535 | #ifdef CVMX_QLM_DUMP_STATE |
| 536 | debug("%s:%d: QLM%d: Applying workaround for Errata G-16467\n", |
| 537 | __func__, __LINE__, qlm); |
| 538 | cvmx_qlm_display_registers(qlm); |
| 539 | debug("\n"); |
| 540 | #endif |
| 541 | cvmx_qlm_jtag_set(qlm, -1, "cfg_cdr_trunc", 0); |
| 542 | /* Hold the QLM in reset */ |
| 543 | cvmx_qlm_jtag_set(qlm, -1, "cfg_rst_n_set", 0); |
| 544 | cvmx_qlm_jtag_set(qlm, -1, "cfg_rst_n_clr", 1); |
| 545 | /* Forcfe TX to be idle */ |
| 546 | cvmx_qlm_jtag_set(qlm, -1, "cfg_tx_idle_clr", 0); |
| 547 | cvmx_qlm_jtag_set(qlm, -1, "cfg_tx_idle_set", 1); |
| 548 | if (OCTEON_IS_MODEL(OCTEON_CN68XX_PASS2_0)) { |
| 549 | ir50dac = cvmx_qlm_jtag_get(qlm, 0, "ir50dac"); |
| 550 | while (++ir50dac <= 31) |
| 551 | cvmx_qlm_jtag_set(qlm, -1, "ir50dac", ir50dac); |
| 552 | } |
| 553 | cvmx_qlm_jtag_set(qlm, -1, "div4_byp", 0); |
| 554 | cvmx_qlm_jtag_set(qlm, -1, "clkf_byp", 16); |
| 555 | cvmx_qlm_jtag_set(qlm, -1, "serdes_pll_byp", 1); |
| 556 | cvmx_qlm_jtag_set(qlm, -1, "spdsel_byp", 1); |
| 557 | #ifdef CVMX_QLM_DUMP_STATE |
| 558 | debug("%s:%d: QLM%d: Done applying workaround for Errata G-16467\n", |
| 559 | __func__, __LINE__, qlm); |
| 560 | cvmx_qlm_display_registers(qlm); |
| 561 | debug("\n\n"); |
| 562 | #endif |
| 563 | /* |
| 564 | * The QLM will be taken out of reset later |
| 565 | * when ILK/XAUI are initialized. |
| 566 | */ |
| 567 | } |
| 568 | } |
| 569 | } else if (OCTEON_IS_MODEL(OCTEON_CN68XX_PASS1_X) || |
| 570 | OCTEON_IS_MODEL(OCTEON_CN66XX_PASS1_X)) { |
| 571 | /* Loop through the QLMs */ |
| 572 | for (qlm = 0; qlm < num_qlms; qlm++) { |
| 573 | /* Read the QLM speed */ |
| 574 | qlm_cfg.u64 = csr_rd(CVMX_MIO_QLMX_CFG(qlm)); |
| 575 | |
| 576 | /* If the QLM is at 6.25Ghz or 5Ghz then program JTAG */ |
| 577 | if (qlm_cfg.s.qlm_spd == 5 || qlm_cfg.s.qlm_spd == 12 || |
| 578 | qlm_cfg.s.qlm_spd == 0 || qlm_cfg.s.qlm_spd == 6 || |
| 579 | qlm_cfg.s.qlm_spd == 11) { |
| 580 | cvmx_qlm_jtag_set(qlm, -1, "rx_cap_gen2", 0x1); |
| 581 | cvmx_qlm_jtag_set(qlm, -1, "rx_eq_gen2", 0x8); |
| 582 | } |
| 583 | } |
| 584 | } |
| 585 | } |
| 586 | |
| 587 | /** |
| 588 | * Errata G-16174: QLM Gen2 PCIe IDLE DAC change. |
| 589 | * CN68XX pass 1.x, CN66XX pass 1.x and CN63XX pass 1.0-2.2 QLM tweak. |
| 590 | * This function tweaks the JTAG setting for a QLMs for PCIe to run better. |
| 591 | */ |
| 592 | void __cvmx_qlm_pcie_idle_dac_tweak(void) |
| 593 | { |
| 594 | int num_qlms = 0; |
| 595 | int qlm; |
| 596 | |
| 597 | if (OCTEON_IS_MODEL(OCTEON_CN68XX_PASS1_X)) |
| 598 | num_qlms = 5; |
| 599 | else if (OCTEON_IS_MODEL(OCTEON_CN66XX_PASS1_X)) |
| 600 | num_qlms = 3; |
| 601 | else if (OCTEON_IS_MODEL(OCTEON_CN63XX)) |
| 602 | num_qlms = 3; |
| 603 | else |
| 604 | return; |
| 605 | |
| 606 | /* Loop through the QLMs */ |
| 607 | for (qlm = 0; qlm < num_qlms; qlm++) |
| 608 | cvmx_qlm_jtag_set(qlm, -1, "idle_dac", 0x2); |
| 609 | } |
| 610 | |
| 611 | void __cvmx_qlm_pcie_cfg_rxd_set_tweak(int qlm, int lane) |
| 612 | { |
| 613 | if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)) |
| 614 | cvmx_qlm_jtag_set(qlm, lane, "cfg_rxd_set", 0x1); |
| 615 | } |
| 616 | |
| 617 | /** |
| 618 | * Get the speed (Gbaud) of the QLM in Mhz for a given node. |
| 619 | * |
| 620 | * @param node node of the QLM |
| 621 | * @param qlm QLM to examine |
| 622 | * |
| 623 | * @return Speed in Mhz |
| 624 | */ |
| 625 | int cvmx_qlm_get_gbaud_mhz_node(int node, int qlm) |
| 626 | { |
| 627 | cvmx_gserx_lane_mode_t lane_mode; |
| 628 | cvmx_gserx_cfg_t cfg; |
| 629 | |
| 630 | if (!octeon_has_feature(OCTEON_FEATURE_MULTINODE)) |
| 631 | return 0; |
| 632 | |
| 633 | if (qlm >= 8) |
| 634 | return -1; /* FIXME for OCI */ |
| 635 | /* Check if QLM is configured */ |
| 636 | cfg.u64 = csr_rd_node(node, CVMX_GSERX_CFG(qlm)); |
| 637 | if (cfg.u64 == 0) |
| 638 | return -1; |
| 639 | if (cfg.s.pcie) { |
| 640 | int pem = 0; |
| 641 | cvmx_pemx_cfg_t pemx_cfg; |
| 642 | |
| 643 | switch (qlm) { |
| 644 | case 0: /* Either PEM0 x4 of PEM0 x8 */ |
| 645 | pem = 0; |
| 646 | break; |
| 647 | case 1: /* Either PEM0 x4 of PEM1 x4 */ |
| 648 | pemx_cfg.u64 = csr_rd_node(node, CVMX_PEMX_CFG(0)); |
| 649 | if (pemx_cfg.cn78xx.lanes8) |
| 650 | pem = 0; |
| 651 | else |
| 652 | pem = 1; |
| 653 | break; |
| 654 | case 2: /* Either PEM2 x4 of PEM2 x8 */ |
| 655 | pem = 2; |
| 656 | break; |
| 657 | case 3: /* Either PEM2 x8 of PEM3 x4 or x8 */ |
| 658 | /* Can be last 4 lanes of PEM2 */ |
| 659 | pemx_cfg.u64 = csr_rd_node(node, CVMX_PEMX_CFG(2)); |
| 660 | if (pemx_cfg.cn78xx.lanes8) { |
| 661 | pem = 2; |
| 662 | } else { |
| 663 | pemx_cfg.u64 = csr_rd_node(node, CVMX_PEMX_CFG(3)); |
| 664 | if (pemx_cfg.cn78xx.lanes8) |
| 665 | pem = 3; |
| 666 | else |
| 667 | pem = 2; |
| 668 | } |
| 669 | break; |
| 670 | case 4: /* Either PEM3 x8 of PEM3 x4 */ |
| 671 | pem = 3; |
| 672 | break; |
| 673 | default: |
| 674 | debug("QLM%d: Should be in PCIe mode\n", qlm); |
| 675 | break; |
| 676 | } |
| 677 | pemx_cfg.u64 = csr_rd_node(node, CVMX_PEMX_CFG(pem)); |
| 678 | switch (pemx_cfg.s.md) { |
| 679 | case 0: /* Gen1 */ |
| 680 | return 2500; |
| 681 | case 1: /* Gen2 */ |
| 682 | return 5000; |
| 683 | case 2: /* Gen3 */ |
| 684 | return 8000; |
| 685 | default: |
| 686 | return 0; |
| 687 | } |
| 688 | } else { |
| 689 | lane_mode.u64 = csr_rd_node(node, CVMX_GSERX_LANE_MODE(qlm)); |
| 690 | switch (lane_mode.s.lmode) { |
| 691 | case R_25G_REFCLK100: |
| 692 | return 2500; |
| 693 | case R_5G_REFCLK100: |
| 694 | return 5000; |
| 695 | case R_8G_REFCLK100: |
| 696 | return 8000; |
| 697 | case R_125G_REFCLK15625_KX: |
| 698 | return 1250; |
| 699 | case R_3125G_REFCLK15625_XAUI: |
| 700 | return 3125; |
| 701 | case R_103125G_REFCLK15625_KR: |
| 702 | return 10312; |
| 703 | case R_125G_REFCLK15625_SGMII: |
| 704 | return 1250; |
| 705 | case R_5G_REFCLK15625_QSGMII: |
| 706 | return 5000; |
| 707 | case R_625G_REFCLK15625_RXAUI: |
| 708 | return 6250; |
| 709 | case R_25G_REFCLK125: |
| 710 | return 2500; |
| 711 | case R_5G_REFCLK125: |
| 712 | return 5000; |
| 713 | case R_8G_REFCLK125: |
| 714 | return 8000; |
| 715 | default: |
| 716 | return 0; |
| 717 | } |
| 718 | } |
| 719 | } |
| 720 | |
| 721 | /** |
| 722 | * Get the speed (Gbaud) of the QLM in Mhz. |
| 723 | * |
| 724 | * @param qlm QLM to examine |
| 725 | * |
| 726 | * @return Speed in Mhz |
| 727 | */ |
| 728 | int cvmx_qlm_get_gbaud_mhz(int qlm) |
| 729 | { |
| 730 | if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { |
| 731 | if (qlm == 2) { |
| 732 | cvmx_gmxx_inf_mode_t inf_mode; |
| 733 | |
| 734 | inf_mode.u64 = csr_rd(CVMX_GMXX_INF_MODE(0)); |
| 735 | switch (inf_mode.s.speed) { |
| 736 | case 0: |
| 737 | return 5000; /* 5 Gbaud */ |
| 738 | case 1: |
| 739 | return 2500; /* 2.5 Gbaud */ |
| 740 | case 2: |
| 741 | return 2500; /* 2.5 Gbaud */ |
| 742 | case 3: |
| 743 | return 1250; /* 1.25 Gbaud */ |
| 744 | case 4: |
| 745 | return 1250; /* 1.25 Gbaud */ |
| 746 | case 5: |
| 747 | return 6250; /* 6.25 Gbaud */ |
| 748 | case 6: |
| 749 | return 5000; /* 5 Gbaud */ |
| 750 | case 7: |
| 751 | return 2500; /* 2.5 Gbaud */ |
| 752 | case 8: |
| 753 | return 3125; /* 3.125 Gbaud */ |
| 754 | case 9: |
| 755 | return 2500; /* 2.5 Gbaud */ |
| 756 | case 10: |
| 757 | return 1250; /* 1.25 Gbaud */ |
| 758 | case 11: |
| 759 | return 5000; /* 5 Gbaud */ |
| 760 | case 12: |
| 761 | return 6250; /* 6.25 Gbaud */ |
| 762 | case 13: |
| 763 | return 3750; /* 3.75 Gbaud */ |
| 764 | case 14: |
| 765 | return 3125; /* 3.125 Gbaud */ |
| 766 | default: |
| 767 | return 0; /* Disabled */ |
| 768 | } |
| 769 | } else { |
| 770 | cvmx_sriox_status_reg_t status_reg; |
| 771 | |
| 772 | status_reg.u64 = csr_rd(CVMX_SRIOX_STATUS_REG(qlm)); |
| 773 | if (status_reg.s.srio) { |
| 774 | cvmx_sriomaintx_port_0_ctl2_t sriomaintx_port_0_ctl2; |
| 775 | |
| 776 | sriomaintx_port_0_ctl2.u32 = |
| 777 | csr_rd(CVMX_SRIOMAINTX_PORT_0_CTL2(qlm)); |
| 778 | switch (sriomaintx_port_0_ctl2.s.sel_baud) { |
| 779 | case 1: |
| 780 | return 1250; /* 1.25 Gbaud */ |
| 781 | case 2: |
| 782 | return 2500; /* 2.5 Gbaud */ |
| 783 | case 3: |
| 784 | return 3125; /* 3.125 Gbaud */ |
| 785 | case 4: |
| 786 | return 5000; /* 5 Gbaud */ |
| 787 | case 5: |
| 788 | return 6250; /* 6.250 Gbaud */ |
| 789 | default: |
| 790 | return 0; /* Disabled */ |
| 791 | } |
| 792 | } else { |
| 793 | cvmx_pciercx_cfg032_t pciercx_cfg032; |
| 794 | |
| 795 | pciercx_cfg032.u32 = csr_rd(CVMX_PCIERCX_CFG032(qlm)); |
| 796 | switch (pciercx_cfg032.s.ls) { |
| 797 | case 1: |
| 798 | return 2500; |
| 799 | case 2: |
| 800 | return 5000; |
| 801 | case 4: |
| 802 | return 8000; |
| 803 | default: { |
| 804 | cvmx_mio_rst_boot_t mio_rst_boot; |
| 805 | |
| 806 | mio_rst_boot.u64 = csr_rd(CVMX_MIO_RST_BOOT); |
| 807 | if (qlm == 0 && mio_rst_boot.s.qlm0_spd == 0xf) |
| 808 | return 0; |
| 809 | |
| 810 | if (qlm == 1 && mio_rst_boot.s.qlm1_spd == 0xf) |
| 811 | return 0; |
| 812 | |
| 813 | /* Best guess I can make */ |
| 814 | return 5000; |
| 815 | } |
| 816 | } |
| 817 | } |
| 818 | } |
| 819 | } else if (OCTEON_IS_OCTEON2()) { |
| 820 | cvmx_mio_qlmx_cfg_t qlm_cfg; |
| 821 | |
| 822 | qlm_cfg.u64 = csr_rd(CVMX_MIO_QLMX_CFG(qlm)); |
| 823 | switch (qlm_cfg.s.qlm_spd) { |
| 824 | case 0: |
| 825 | return 5000; /* 5 Gbaud */ |
| 826 | case 1: |
| 827 | return 2500; /* 2.5 Gbaud */ |
| 828 | case 2: |
| 829 | return 2500; /* 2.5 Gbaud */ |
| 830 | case 3: |
| 831 | return 1250; /* 1.25 Gbaud */ |
| 832 | case 4: |
| 833 | return 1250; /* 1.25 Gbaud */ |
| 834 | case 5: |
| 835 | return 6250; /* 6.25 Gbaud */ |
| 836 | case 6: |
| 837 | return 5000; /* 5 Gbaud */ |
| 838 | case 7: |
| 839 | return 2500; /* 2.5 Gbaud */ |
| 840 | case 8: |
| 841 | return 3125; /* 3.125 Gbaud */ |
| 842 | case 9: |
| 843 | return 2500; /* 2.5 Gbaud */ |
| 844 | case 10: |
| 845 | return 1250; /* 1.25 Gbaud */ |
| 846 | case 11: |
| 847 | return 5000; /* 5 Gbaud */ |
| 848 | case 12: |
| 849 | return 6250; /* 6.25 Gbaud */ |
| 850 | case 13: |
| 851 | return 3750; /* 3.75 Gbaud */ |
| 852 | case 14: |
| 853 | return 3125; /* 3.125 Gbaud */ |
| 854 | default: |
| 855 | return 0; /* Disabled */ |
| 856 | } |
| 857 | } else if (OCTEON_IS_MODEL(OCTEON_CN70XX)) { |
| 858 | cvmx_gserx_dlmx_mpll_multiplier_t mpll_multiplier; |
| 859 | u64 meas_refclock; |
| 860 | u64 freq; |
| 861 | |
| 862 | /* Measure the reference clock */ |
| 863 | meas_refclock = cvmx_qlm_measure_clock(qlm); |
| 864 | /* Multiply to get the final frequency */ |
| 865 | mpll_multiplier.u64 = csr_rd(CVMX_GSERX_DLMX_MPLL_MULTIPLIER(qlm, 0)); |
| 866 | freq = meas_refclock * mpll_multiplier.s.mpll_multiplier; |
| 867 | freq = (freq + 500000) / 1000000; |
| 868 | |
| 869 | return freq; |
| 870 | } else if (OCTEON_IS_MODEL(OCTEON_CN78XX)) { |
| 871 | return cvmx_qlm_get_gbaud_mhz_node(cvmx_get_node_num(), qlm); |
| 872 | } else if (OCTEON_IS_MODEL(OCTEON_CN73XX) || OCTEON_IS_MODEL(OCTEON_CNF75XX)) { |
| 873 | cvmx_gserx_lane_mode_t lane_mode; |
| 874 | |
| 875 | lane_mode.u64 = csr_rd(CVMX_GSERX_LANE_MODE(qlm)); |
| 876 | switch (lane_mode.s.lmode) { |
| 877 | case R_25G_REFCLK100: |
| 878 | return 2500; |
| 879 | case R_5G_REFCLK100: |
| 880 | return 5000; |
| 881 | case R_8G_REFCLK100: |
| 882 | return 8000; |
| 883 | case R_125G_REFCLK15625_KX: |
| 884 | return 1250; |
| 885 | case R_3125G_REFCLK15625_XAUI: |
| 886 | return 3125; |
| 887 | case R_103125G_REFCLK15625_KR: |
| 888 | return 10312; |
| 889 | case R_125G_REFCLK15625_SGMII: |
| 890 | return 1250; |
| 891 | case R_5G_REFCLK15625_QSGMII: |
| 892 | return 5000; |
| 893 | case R_625G_REFCLK15625_RXAUI: |
| 894 | return 6250; |
| 895 | case R_25G_REFCLK125: |
| 896 | return 2500; |
| 897 | case R_5G_REFCLK125: |
| 898 | return 5000; |
| 899 | case R_8G_REFCLK125: |
| 900 | return 8000; |
| 901 | default: |
| 902 | return 0; |
| 903 | } |
| 904 | } |
| 905 | return 0; |
| 906 | } |
| 907 | |
| 908 | static enum cvmx_qlm_mode __cvmx_qlm_get_mode_cn70xx(int qlm) |
| 909 | { |
| 910 | switch (qlm) { |
| 911 | case 0: /* DLM0/DLM1 - SGMII/QSGMII/RXAUI */ |
| 912 | { |
| 913 | union cvmx_gmxx_inf_mode inf_mode0, inf_mode1; |
| 914 | |
| 915 | inf_mode0.u64 = csr_rd(CVMX_GMXX_INF_MODE(0)); |
| 916 | inf_mode1.u64 = csr_rd(CVMX_GMXX_INF_MODE(1)); |
| 917 | |
| 918 | /* SGMII0 SGMII1 */ |
| 919 | switch (inf_mode0.s.mode) { |
| 920 | case CVMX_GMX_INF_MODE_SGMII: |
| 921 | switch (inf_mode1.s.mode) { |
| 922 | case CVMX_GMX_INF_MODE_SGMII: |
| 923 | return CVMX_QLM_MODE_SGMII_SGMII; |
| 924 | case CVMX_GMX_INF_MODE_QSGMII: |
| 925 | return CVMX_QLM_MODE_SGMII_QSGMII; |
| 926 | default: |
| 927 | return CVMX_QLM_MODE_SGMII_DISABLED; |
| 928 | } |
| 929 | case CVMX_GMX_INF_MODE_QSGMII: |
| 930 | switch (inf_mode1.s.mode) { |
| 931 | case CVMX_GMX_INF_MODE_SGMII: |
| 932 | return CVMX_QLM_MODE_QSGMII_SGMII; |
| 933 | case CVMX_GMX_INF_MODE_QSGMII: |
| 934 | return CVMX_QLM_MODE_QSGMII_QSGMII; |
| 935 | default: |
| 936 | return CVMX_QLM_MODE_QSGMII_DISABLED; |
| 937 | } |
| 938 | case CVMX_GMX_INF_MODE_RXAUI: |
| 939 | return CVMX_QLM_MODE_RXAUI_1X2; |
| 940 | default: |
| 941 | switch (inf_mode1.s.mode) { |
| 942 | case CVMX_GMX_INF_MODE_SGMII: |
| 943 | return CVMX_QLM_MODE_DISABLED_SGMII; |
| 944 | case CVMX_GMX_INF_MODE_QSGMII: |
| 945 | return CVMX_QLM_MODE_DISABLED_QSGMII; |
| 946 | default: |
| 947 | return CVMX_QLM_MODE_DISABLED; |
| 948 | } |
| 949 | } |
| 950 | } |
| 951 | case 1: /* Sata / pem0 */ |
| 952 | { |
| 953 | union cvmx_gserx_sata_cfg sata_cfg; |
| 954 | union cvmx_pemx_cfg pem0_cfg; |
| 955 | |
| 956 | sata_cfg.u64 = csr_rd(CVMX_GSERX_SATA_CFG(0)); |
| 957 | pem0_cfg.u64 = csr_rd(CVMX_PEMX_CFG(0)); |
| 958 | |
| 959 | switch (pem0_cfg.cn70xx.md) { |
| 960 | case CVMX_PEM_MD_GEN2_2LANE: |
| 961 | case CVMX_PEM_MD_GEN1_2LANE: |
| 962 | return CVMX_QLM_MODE_PCIE_1X2; |
| 963 | case CVMX_PEM_MD_GEN2_1LANE: |
| 964 | case CVMX_PEM_MD_GEN1_1LANE: |
| 965 | if (sata_cfg.s.sata_en) |
| 966 | /* Both PEM0 and PEM1 */ |
| 967 | return CVMX_QLM_MODE_PCIE_2X1; |
| 968 | |
| 969 | /* Only PEM0 */ |
| 970 | return CVMX_QLM_MODE_PCIE_1X1; |
| 971 | case CVMX_PEM_MD_GEN2_4LANE: |
| 972 | case CVMX_PEM_MD_GEN1_4LANE: |
| 973 | return CVMX_QLM_MODE_PCIE; |
| 974 | default: |
| 975 | return CVMX_QLM_MODE_DISABLED; |
| 976 | } |
| 977 | } |
| 978 | case 2: { |
| 979 | union cvmx_gserx_sata_cfg sata_cfg; |
| 980 | union cvmx_pemx_cfg pem0_cfg, pem1_cfg, pem2_cfg; |
| 981 | |
| 982 | sata_cfg.u64 = csr_rd(CVMX_GSERX_SATA_CFG(0)); |
| 983 | pem0_cfg.u64 = csr_rd(CVMX_PEMX_CFG(0)); |
| 984 | pem1_cfg.u64 = csr_rd(CVMX_PEMX_CFG(1)); |
| 985 | pem2_cfg.u64 = csr_rd(CVMX_PEMX_CFG(2)); |
| 986 | |
| 987 | if (sata_cfg.s.sata_en) |
| 988 | return CVMX_QLM_MODE_SATA_2X1; |
| 989 | if (pem0_cfg.cn70xx.md == CVMX_PEM_MD_GEN2_4LANE || |
| 990 | pem0_cfg.cn70xx.md == CVMX_PEM_MD_GEN1_4LANE) |
| 991 | return CVMX_QLM_MODE_PCIE; |
| 992 | if (pem1_cfg.cn70xx.md == CVMX_PEM_MD_GEN2_2LANE || |
| 993 | pem1_cfg.cn70xx.md == CVMX_PEM_MD_GEN1_2LANE) { |
| 994 | return CVMX_QLM_MODE_PCIE_1X2; |
| 995 | } |
| 996 | if (pem1_cfg.cn70xx.md == CVMX_PEM_MD_GEN2_1LANE || |
| 997 | pem1_cfg.cn70xx.md == CVMX_PEM_MD_GEN1_1LANE) { |
| 998 | if (pem2_cfg.cn70xx.md == CVMX_PEM_MD_GEN2_1LANE || |
| 999 | pem2_cfg.cn70xx.md == CVMX_PEM_MD_GEN1_1LANE) { |
| 1000 | return CVMX_QLM_MODE_PCIE_2X1; |
| 1001 | } else { |
| 1002 | return CVMX_QLM_MODE_PCIE_1X1; |
| 1003 | } |
| 1004 | } |
| 1005 | if (pem2_cfg.cn70xx.md == CVMX_PEM_MD_GEN2_1LANE || |
| 1006 | pem2_cfg.cn70xx.md == CVMX_PEM_MD_GEN1_1LANE) |
| 1007 | return CVMX_QLM_MODE_PCIE_2X1; |
| 1008 | return CVMX_QLM_MODE_DISABLED; |
| 1009 | } |
| 1010 | default: |
| 1011 | return CVMX_QLM_MODE_DISABLED; |
| 1012 | } |
| 1013 | |
| 1014 | return CVMX_QLM_MODE_DISABLED; |
| 1015 | } |
| 1016 | |
| 1017 | /* |
| 1018 | * Get the DLM mode for the interface based on the interface type. |
| 1019 | * |
| 1020 | * @param interface_type 0 - SGMII/QSGMII/RXAUI interface |
| 1021 | * 1 - PCIe |
| 1022 | * 2 - SATA |
| 1023 | * @param interface interface to use |
| 1024 | * @return the qlm mode the interface is |
| 1025 | */ |
| 1026 | enum cvmx_qlm_mode cvmx_qlm_get_dlm_mode(int interface_type, int interface) |
| 1027 | { |
| 1028 | switch (interface_type) { |
| 1029 | case 0: /* SGMII/QSGMII/RXAUI */ |
| 1030 | { |
| 1031 | enum cvmx_qlm_mode qlm_mode = __cvmx_qlm_get_mode_cn70xx(0); |
| 1032 | |
| 1033 | switch (interface) { |
| 1034 | case 0: |
| 1035 | switch (qlm_mode) { |
| 1036 | case CVMX_QLM_MODE_SGMII_SGMII: |
| 1037 | case CVMX_QLM_MODE_SGMII_DISABLED: |
| 1038 | case CVMX_QLM_MODE_SGMII_QSGMII: |
| 1039 | return CVMX_QLM_MODE_SGMII; |
| 1040 | case CVMX_QLM_MODE_QSGMII_QSGMII: |
| 1041 | case CVMX_QLM_MODE_QSGMII_DISABLED: |
| 1042 | case CVMX_QLM_MODE_QSGMII_SGMII: |
| 1043 | return CVMX_QLM_MODE_QSGMII; |
| 1044 | case CVMX_QLM_MODE_RXAUI_1X2: |
| 1045 | return CVMX_QLM_MODE_RXAUI; |
| 1046 | default: |
| 1047 | return CVMX_QLM_MODE_DISABLED; |
| 1048 | } |
| 1049 | case 1: |
| 1050 | switch (qlm_mode) { |
| 1051 | case CVMX_QLM_MODE_SGMII_SGMII: |
| 1052 | case CVMX_QLM_MODE_DISABLED_SGMII: |
| 1053 | case CVMX_QLM_MODE_QSGMII_SGMII: |
| 1054 | return CVMX_QLM_MODE_SGMII; |
| 1055 | case CVMX_QLM_MODE_QSGMII_QSGMII: |
| 1056 | case CVMX_QLM_MODE_DISABLED_QSGMII: |
| 1057 | case CVMX_QLM_MODE_SGMII_QSGMII: |
| 1058 | return CVMX_QLM_MODE_QSGMII; |
| 1059 | default: |
| 1060 | return CVMX_QLM_MODE_DISABLED; |
| 1061 | } |
| 1062 | default: |
| 1063 | return qlm_mode; |
| 1064 | } |
| 1065 | } |
| 1066 | case 1: /* PCIe */ |
| 1067 | { |
| 1068 | enum cvmx_qlm_mode qlm_mode1 = __cvmx_qlm_get_mode_cn70xx(1); |
| 1069 | enum cvmx_qlm_mode qlm_mode2 = __cvmx_qlm_get_mode_cn70xx(2); |
| 1070 | |
| 1071 | switch (interface) { |
| 1072 | case 0: /* PCIe0 can be DLM1 with 1, 2 or 4 lanes */ |
| 1073 | return qlm_mode1; |
| 1074 | case 1: |
| 1075 | /* |
| 1076 | * PCIe1 can be in DLM1 1 lane(1), DLM2 1 lane(0) |
| 1077 | * or 2 lanes(0-1) |
| 1078 | */ |
| 1079 | if (qlm_mode1 == CVMX_QLM_MODE_PCIE_2X1) |
| 1080 | return CVMX_QLM_MODE_PCIE_2X1; |
| 1081 | else if (qlm_mode2 == CVMX_QLM_MODE_PCIE_1X2 || |
| 1082 | qlm_mode2 == CVMX_QLM_MODE_PCIE_2X1) |
| 1083 | return qlm_mode2; |
| 1084 | else |
| 1085 | return CVMX_QLM_MODE_DISABLED; |
| 1086 | case 2: /* PCIe2 can be DLM2 1 lanes(1) */ |
| 1087 | if (qlm_mode2 == CVMX_QLM_MODE_PCIE_2X1) |
| 1088 | return qlm_mode2; |
| 1089 | else |
| 1090 | return CVMX_QLM_MODE_DISABLED; |
| 1091 | default: |
| 1092 | return CVMX_QLM_MODE_DISABLED; |
| 1093 | } |
| 1094 | } |
| 1095 | case 2: /* SATA */ |
| 1096 | { |
| 1097 | enum cvmx_qlm_mode qlm_mode = __cvmx_qlm_get_mode_cn70xx(2); |
| 1098 | |
| 1099 | if (qlm_mode == CVMX_QLM_MODE_SATA_2X1) |
| 1100 | return CVMX_QLM_MODE_SATA_2X1; |
| 1101 | else |
| 1102 | return CVMX_QLM_MODE_DISABLED; |
| 1103 | } |
| 1104 | default: |
| 1105 | return CVMX_QLM_MODE_DISABLED; |
| 1106 | } |
| 1107 | } |
| 1108 | |
| 1109 | static enum cvmx_qlm_mode __cvmx_qlm_get_mode_cn6xxx(int qlm) |
| 1110 | { |
| 1111 | cvmx_mio_qlmx_cfg_t qlmx_cfg; |
| 1112 | |
| 1113 | if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { |
| 1114 | qlmx_cfg.u64 = csr_rd(CVMX_MIO_QLMX_CFG(qlm)); |
| 1115 | /* QLM is disabled when QLM SPD is 15. */ |
| 1116 | if (qlmx_cfg.s.qlm_spd == 15) |
| 1117 | return CVMX_QLM_MODE_DISABLED; |
| 1118 | |
| 1119 | switch (qlmx_cfg.s.qlm_cfg) { |
| 1120 | case 0: /* PCIE */ |
| 1121 | return CVMX_QLM_MODE_PCIE; |
| 1122 | case 1: /* ILK */ |
| 1123 | return CVMX_QLM_MODE_ILK; |
| 1124 | case 2: /* SGMII */ |
| 1125 | return CVMX_QLM_MODE_SGMII; |
| 1126 | case 3: /* XAUI */ |
| 1127 | return CVMX_QLM_MODE_XAUI; |
| 1128 | case 7: /* RXAUI */ |
| 1129 | return CVMX_QLM_MODE_RXAUI; |
| 1130 | default: |
| 1131 | return CVMX_QLM_MODE_DISABLED; |
| 1132 | } |
| 1133 | } else if (OCTEON_IS_MODEL(OCTEON_CN66XX)) { |
| 1134 | qlmx_cfg.u64 = csr_rd(CVMX_MIO_QLMX_CFG(qlm)); |
| 1135 | /* QLM is disabled when QLM SPD is 15. */ |
| 1136 | if (qlmx_cfg.s.qlm_spd == 15) |
| 1137 | return CVMX_QLM_MODE_DISABLED; |
| 1138 | |
| 1139 | switch (qlmx_cfg.s.qlm_cfg) { |
| 1140 | case 0x9: /* SGMII */ |
| 1141 | return CVMX_QLM_MODE_SGMII; |
| 1142 | case 0xb: /* XAUI */ |
| 1143 | return CVMX_QLM_MODE_XAUI; |
| 1144 | case 0x0: /* PCIE gen2 */ |
| 1145 | case 0x8: /* PCIE gen2 (alias) */ |
| 1146 | case 0x2: /* PCIE gen1 */ |
| 1147 | case 0xa: /* PCIE gen1 (alias) */ |
| 1148 | return CVMX_QLM_MODE_PCIE; |
| 1149 | case 0x1: /* SRIO 1x4 short */ |
| 1150 | case 0x3: /* SRIO 1x4 long */ |
| 1151 | return CVMX_QLM_MODE_SRIO_1X4; |
| 1152 | case 0x4: /* SRIO 2x2 short */ |
| 1153 | case 0x6: /* SRIO 2x2 long */ |
| 1154 | return CVMX_QLM_MODE_SRIO_2X2; |
| 1155 | case 0x5: /* SRIO 4x1 short */ |
| 1156 | case 0x7: /* SRIO 4x1 long */ |
| 1157 | if (!OCTEON_IS_MODEL(OCTEON_CN66XX_PASS1_0)) |
| 1158 | return CVMX_QLM_MODE_SRIO_4X1; |
| 1159 | fallthrough; |
| 1160 | default: |
| 1161 | return CVMX_QLM_MODE_DISABLED; |
| 1162 | } |
| 1163 | } else if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { |
| 1164 | cvmx_sriox_status_reg_t status_reg; |
| 1165 | /* For now skip qlm2 */ |
| 1166 | if (qlm == 2) { |
| 1167 | cvmx_gmxx_inf_mode_t inf_mode; |
| 1168 | |
| 1169 | inf_mode.u64 = csr_rd(CVMX_GMXX_INF_MODE(0)); |
| 1170 | if (inf_mode.s.speed == 15) |
| 1171 | return CVMX_QLM_MODE_DISABLED; |
| 1172 | else if (inf_mode.s.mode == 0) |
| 1173 | return CVMX_QLM_MODE_SGMII; |
| 1174 | else |
| 1175 | return CVMX_QLM_MODE_XAUI; |
| 1176 | } |
| 1177 | status_reg.u64 = csr_rd(CVMX_SRIOX_STATUS_REG(qlm)); |
| 1178 | if (status_reg.s.srio) |
| 1179 | return CVMX_QLM_MODE_SRIO_1X4; |
| 1180 | else |
| 1181 | return CVMX_QLM_MODE_PCIE; |
| 1182 | } else if (OCTEON_IS_MODEL(OCTEON_CN61XX)) { |
| 1183 | qlmx_cfg.u64 = csr_rd(CVMX_MIO_QLMX_CFG(qlm)); |
| 1184 | /* QLM is disabled when QLM SPD is 15. */ |
| 1185 | if (qlmx_cfg.s.qlm_spd == 15) |
| 1186 | return CVMX_QLM_MODE_DISABLED; |
| 1187 | |
| 1188 | switch (qlm) { |
| 1189 | case 0: |
| 1190 | switch (qlmx_cfg.s.qlm_cfg) { |
| 1191 | case 0: /* PCIe 1x4 gen2 / gen1 */ |
| 1192 | return CVMX_QLM_MODE_PCIE; |
| 1193 | case 2: /* SGMII */ |
| 1194 | return CVMX_QLM_MODE_SGMII; |
| 1195 | case 3: /* XAUI */ |
| 1196 | return CVMX_QLM_MODE_XAUI; |
| 1197 | default: |
| 1198 | return CVMX_QLM_MODE_DISABLED; |
| 1199 | } |
| 1200 | break; |
| 1201 | case 1: |
| 1202 | switch (qlmx_cfg.s.qlm_cfg) { |
| 1203 | case 0: /* PCIe 1x2 gen2 / gen1 */ |
| 1204 | return CVMX_QLM_MODE_PCIE_1X2; |
| 1205 | case 1: /* PCIe 2x1 gen2 / gen1 */ |
| 1206 | return CVMX_QLM_MODE_PCIE_2X1; |
| 1207 | default: |
| 1208 | return CVMX_QLM_MODE_DISABLED; |
| 1209 | } |
| 1210 | break; |
| 1211 | case 2: |
| 1212 | switch (qlmx_cfg.s.qlm_cfg) { |
| 1213 | case 2: /* SGMII */ |
| 1214 | return CVMX_QLM_MODE_SGMII; |
| 1215 | case 3: /* XAUI */ |
| 1216 | return CVMX_QLM_MODE_XAUI; |
| 1217 | default: |
| 1218 | return CVMX_QLM_MODE_DISABLED; |
| 1219 | } |
| 1220 | break; |
| 1221 | } |
| 1222 | } else if (OCTEON_IS_MODEL(OCTEON_CNF71XX)) { |
| 1223 | qlmx_cfg.u64 = csr_rd(CVMX_MIO_QLMX_CFG(qlm)); |
| 1224 | /* QLM is disabled when QLM SPD is 15. */ |
| 1225 | if (qlmx_cfg.s.qlm_spd == 15) |
| 1226 | return CVMX_QLM_MODE_DISABLED; |
| 1227 | |
| 1228 | switch (qlm) { |
| 1229 | case 0: |
| 1230 | if (qlmx_cfg.s.qlm_cfg == 2) /* SGMII */ |
| 1231 | return CVMX_QLM_MODE_SGMII; |
| 1232 | break; |
| 1233 | case 1: |
| 1234 | switch (qlmx_cfg.s.qlm_cfg) { |
| 1235 | case 0: /* PCIe 1x2 gen2 / gen1 */ |
| 1236 | return CVMX_QLM_MODE_PCIE_1X2; |
| 1237 | case 1: /* PCIe 2x1 gen2 / gen1 */ |
| 1238 | return CVMX_QLM_MODE_PCIE_2X1; |
| 1239 | default: |
| 1240 | return CVMX_QLM_MODE_DISABLED; |
| 1241 | } |
| 1242 | break; |
| 1243 | } |
| 1244 | } |
| 1245 | return CVMX_QLM_MODE_DISABLED; |
| 1246 | } |
| 1247 | |
| 1248 | /** |
| 1249 | * @INTERNAL |
| 1250 | * Decrement the MPLL Multiplier for the DLM as per Errata G-20669 |
| 1251 | * |
| 1252 | * @param qlm DLM to configure |
| 1253 | * @param baud_mhz Speed of the DLM configured at |
| 1254 | * @param old_multiplier MPLL_MULTIPLIER value to decrement |
| 1255 | */ |
| 1256 | void __cvmx_qlm_set_mult(int qlm, int baud_mhz, int old_multiplier) |
| 1257 | { |
| 1258 | cvmx_gserx_dlmx_mpll_multiplier_t mpll_multiplier; |
| 1259 | cvmx_gserx_dlmx_ref_clkdiv2_t clkdiv; |
| 1260 | u64 meas_refclock, mult; |
| 1261 | |
| 1262 | if (!OCTEON_IS_MODEL(OCTEON_CN70XX)) |
| 1263 | return; |
| 1264 | |
| 1265 | if (qlm == -1) |
| 1266 | return; |
| 1267 | |
| 1268 | meas_refclock = cvmx_qlm_measure_clock(qlm); |
| 1269 | if (meas_refclock == 0) { |
| 1270 | printf("DLM%d: Reference clock not running\n", qlm); |
| 1271 | return; |
| 1272 | } |
| 1273 | |
| 1274 | /* |
| 1275 | * The baud rate multiplier needs to be adjusted on the CN70XX if |
| 1276 | * the reference clock is > 100MHz. |
| 1277 | */ |
| 1278 | if (qlm == 0) { |
| 1279 | clkdiv.u64 = csr_rd(CVMX_GSERX_DLMX_REF_CLKDIV2(qlm, 0)); |
| 1280 | if (clkdiv.s.ref_clkdiv2) |
| 1281 | baud_mhz *= 2; |
| 1282 | } |
| 1283 | mult = (uint64_t)baud_mhz * 1000000 + (meas_refclock / 2); |
| 1284 | mult /= meas_refclock; |
| 1285 | |
| 1286 | /* |
| 1287 | * 6. Decrease MPLL_MULTIPLIER by one continually until it reaches |
| 1288 | * the desired long-term setting, ensuring that each MPLL_MULTIPLIER |
| 1289 | * value is constant for at least 1 msec before changing to the next |
| 1290 | * value. The desired long-term setting is as indicated in HRM tables |
| 1291 | * 21-1, 21-2, and 21-3. This is not required with the HRM |
| 1292 | * sequence. |
| 1293 | */ |
| 1294 | do { |
| 1295 | mpll_multiplier.u64 = csr_rd(CVMX_GSERX_DLMX_MPLL_MULTIPLIER(qlm, 0)); |
| 1296 | mpll_multiplier.s.mpll_multiplier = --old_multiplier; |
| 1297 | csr_wr(CVMX_GSERX_DLMX_MPLL_MULTIPLIER(qlm, 0), mpll_multiplier.u64); |
| 1298 | /* Wait for 1 ms */ |
| 1299 | udelay(1000); |
| 1300 | } while (old_multiplier > (int)mult); |
| 1301 | } |
| 1302 | |
| 1303 | enum cvmx_qlm_mode cvmx_qlm_get_mode_cn78xx(int node, int qlm) |
| 1304 | { |
| 1305 | cvmx_gserx_cfg_t gserx_cfg; |
| 1306 | int qlm_mode[2][9] = { { -1, -1, -1, -1, -1, -1, -1, -1 }, |
| 1307 | { -1, -1, -1, -1, -1, -1, -1, -1 } }; |
| 1308 | |
| 1309 | if (qlm >= 8) |
| 1310 | return CVMX_QLM_MODE_OCI; |
| 1311 | |
| 1312 | if (qlm_mode[node][qlm] != -1) |
| 1313 | return qlm_mode[node][qlm]; |
| 1314 | |
| 1315 | gserx_cfg.u64 = csr_rd_node(node, CVMX_GSERX_CFG(qlm)); |
| 1316 | if (gserx_cfg.s.pcie) { |
| 1317 | switch (qlm) { |
| 1318 | case 0: /* Either PEM0 x4 or PEM0 x8 */ |
| 1319 | case 1: /* Either PEM0 x8 or PEM1 x4 */ |
| 1320 | { |
| 1321 | cvmx_pemx_cfg_t pemx_cfg; |
| 1322 | |
| 1323 | pemx_cfg.u64 = csr_rd_node(node, CVMX_PEMX_CFG(0)); |
| 1324 | if (pemx_cfg.cn78xx.lanes8) { |
| 1325 | /* PEM0 x8 */ |
| 1326 | qlm_mode[node][qlm] = CVMX_QLM_MODE_PCIE_1X8; |
| 1327 | } else { |
| 1328 | /* PEM0 x4 */ |
| 1329 | qlm_mode[node][qlm] = CVMX_QLM_MODE_PCIE; |
| 1330 | } |
| 1331 | break; |
| 1332 | } |
| 1333 | case 2: /* Either PEM2 x4 or PEM2 x8 */ |
| 1334 | { |
| 1335 | cvmx_pemx_cfg_t pemx_cfg; |
| 1336 | |
| 1337 | pemx_cfg.u64 = csr_rd_node(node, CVMX_PEMX_CFG(2)); |
| 1338 | if (pemx_cfg.cn78xx.lanes8) { |
| 1339 | /* PEM2 x8 */ |
| 1340 | qlm_mode[node][qlm] = CVMX_QLM_MODE_PCIE_1X8; |
| 1341 | } else { |
| 1342 | /* PEM2 x4 */ |
| 1343 | qlm_mode[node][qlm] = CVMX_QLM_MODE_PCIE; |
| 1344 | } |
| 1345 | break; |
| 1346 | } |
| 1347 | case 3: /* Either PEM2 x8 or PEM3 x4 or PEM3 x8 */ |
| 1348 | { |
| 1349 | cvmx_pemx_cfg_t pemx_cfg; |
| 1350 | |
| 1351 | pemx_cfg.u64 = csr_rd_node(node, CVMX_PEMX_CFG(2)); |
| 1352 | if (pemx_cfg.cn78xx.lanes8) { |
| 1353 | /* PEM2 x8 */ |
| 1354 | qlm_mode[node][qlm] = CVMX_QLM_MODE_PCIE_1X8; |
| 1355 | } |
| 1356 | |
| 1357 | /* Can be first 4 lanes of PEM3 */ |
| 1358 | pemx_cfg.u64 = csr_rd_node(node, CVMX_PEMX_CFG(3)); |
| 1359 | if (pemx_cfg.cn78xx.lanes8) { |
| 1360 | /* PEM3 x8 */ |
| 1361 | qlm_mode[node][qlm] = CVMX_QLM_MODE_PCIE_1X8; |
| 1362 | } else { |
| 1363 | /* PEM2 x4 */ |
| 1364 | qlm_mode[node][qlm] = CVMX_QLM_MODE_PCIE; |
| 1365 | } |
| 1366 | break; |
| 1367 | } |
| 1368 | case 4: /* Either PEM3 x8 or PEM3 x4 */ |
| 1369 | { |
| 1370 | cvmx_pemx_cfg_t pemx_cfg; |
| 1371 | |
| 1372 | pemx_cfg.u64 = csr_rd_node(node, CVMX_PEMX_CFG(3)); |
| 1373 | if (pemx_cfg.cn78xx.lanes8) { |
| 1374 | /* PEM3 x8 */ |
| 1375 | qlm_mode[node][qlm] = CVMX_QLM_MODE_PCIE_1X8; |
| 1376 | } else { |
| 1377 | /* PEM3 x4 */ |
| 1378 | qlm_mode[node][qlm] = CVMX_QLM_MODE_PCIE; |
| 1379 | } |
| 1380 | break; |
| 1381 | } |
| 1382 | default: |
| 1383 | qlm_mode[node][qlm] = CVMX_QLM_MODE_DISABLED; |
| 1384 | break; |
| 1385 | } |
| 1386 | } else if (gserx_cfg.s.ila) { |
| 1387 | qlm_mode[node][qlm] = CVMX_QLM_MODE_ILK; |
| 1388 | } else if (gserx_cfg.s.bgx) { |
| 1389 | cvmx_bgxx_cmrx_config_t cmr_config; |
| 1390 | cvmx_bgxx_spux_br_pmd_control_t pmd_control; |
| 1391 | int bgx = (qlm < 2) ? qlm : qlm - 2; |
| 1392 | |
| 1393 | cmr_config.u64 = csr_rd_node(node, CVMX_BGXX_CMRX_CONFIG(0, bgx)); |
| 1394 | pmd_control.u64 = csr_rd_node(node, CVMX_BGXX_SPUX_BR_PMD_CONTROL(0, bgx)); |
| 1395 | |
| 1396 | switch (cmr_config.s.lmac_type) { |
| 1397 | case 0: |
| 1398 | qlm_mode[node][qlm] = CVMX_QLM_MODE_SGMII; |
| 1399 | break; |
| 1400 | case 1: |
| 1401 | qlm_mode[node][qlm] = CVMX_QLM_MODE_XAUI; |
| 1402 | break; |
| 1403 | case 2: |
| 1404 | qlm_mode[node][qlm] = CVMX_QLM_MODE_RXAUI; |
| 1405 | break; |
| 1406 | case 3: |
| 1407 | /* |
| 1408 | * Use training to determine if we're in 10GBASE-KR |
| 1409 | * or XFI |
| 1410 | */ |
| 1411 | if (pmd_control.s.train_en) |
| 1412 | qlm_mode[node][qlm] = CVMX_QLM_MODE_10G_KR; |
| 1413 | else |
| 1414 | qlm_mode[node][qlm] = CVMX_QLM_MODE_XFI; |
| 1415 | break; |
| 1416 | case 4: |
| 1417 | /* |
| 1418 | * Use training to determine if we're in 40GBASE-KR |
| 1419 | * or XLAUI |
| 1420 | */ |
| 1421 | if (pmd_control.s.train_en) |
| 1422 | qlm_mode[node][qlm] = CVMX_QLM_MODE_40G_KR4; |
| 1423 | else |
| 1424 | qlm_mode[node][qlm] = CVMX_QLM_MODE_XLAUI; |
| 1425 | break; |
| 1426 | default: |
| 1427 | qlm_mode[node][qlm] = CVMX_QLM_MODE_DISABLED; |
| 1428 | break; |
| 1429 | } |
| 1430 | } else { |
| 1431 | qlm_mode[node][qlm] = CVMX_QLM_MODE_DISABLED; |
| 1432 | } |
| 1433 | |
| 1434 | return qlm_mode[node][qlm]; |
| 1435 | } |
| 1436 | |
| 1437 | enum cvmx_qlm_mode __cvmx_qlm_get_mode_cn73xx(int qlm) |
| 1438 | { |
| 1439 | cvmx_gserx_cfg_t gserx_cfg; |
| 1440 | int qlm_mode[7] = { -1, -1, -1, -1, -1, -1, -1 }; |
| 1441 | |
| 1442 | if (qlm_mode[qlm] != -1) |
| 1443 | return qlm_mode[qlm]; |
| 1444 | |
| 1445 | if (qlm > 6) { |
| 1446 | debug("Invalid QLM(%d) passed\n", qlm); |
| 1447 | return -1; |
| 1448 | } |
| 1449 | |
| 1450 | gserx_cfg.u64 = csr_rd(CVMX_GSERX_CFG(qlm)); |
| 1451 | if (gserx_cfg.s.pcie) { |
| 1452 | cvmx_pemx_cfg_t pemx_cfg; |
| 1453 | |
| 1454 | switch (qlm) { |
| 1455 | case 0: /* Either PEM0 x4 or PEM0 x8 */ |
| 1456 | case 1: /* Either PEM0 x8 or PEM1 x4 */ |
| 1457 | { |
| 1458 | pemx_cfg.u64 = csr_rd(CVMX_PEMX_CFG(0)); |
| 1459 | if (pemx_cfg.cn78xx.lanes8) { |
| 1460 | /* PEM0 x8 */ |
| 1461 | qlm_mode[qlm] = CVMX_QLM_MODE_PCIE_1X8; |
| 1462 | } else { |
| 1463 | /* PEM0/PEM1 x4 */ |
| 1464 | qlm_mode[qlm] = CVMX_QLM_MODE_PCIE; |
| 1465 | } |
| 1466 | break; |
| 1467 | } |
| 1468 | case 2: /* Either PEM2 x4 or PEM2 x8 */ |
| 1469 | { |
| 1470 | pemx_cfg.u64 = csr_rd(CVMX_PEMX_CFG(2)); |
| 1471 | if (pemx_cfg.cn78xx.lanes8) { |
| 1472 | /* PEM2 x8 */ |
| 1473 | qlm_mode[qlm] = CVMX_QLM_MODE_PCIE_1X8; |
| 1474 | } else { |
| 1475 | /* PEM2 x4 */ |
| 1476 | qlm_mode[qlm] = CVMX_QLM_MODE_PCIE; |
| 1477 | } |
| 1478 | break; |
| 1479 | } |
| 1480 | case 5: |
| 1481 | case 6: /* PEM3 x2 */ |
| 1482 | qlm_mode[qlm] = CVMX_QLM_MODE_PCIE_1X2; /* PEM3 x2 */ |
| 1483 | break; |
| 1484 | case 3: /* Either PEM2 x8 or PEM3 x4 */ |
| 1485 | { |
| 1486 | pemx_cfg.u64 = csr_rd(CVMX_PEMX_CFG(2)); |
| 1487 | if (pemx_cfg.cn78xx.lanes8) { |
| 1488 | /* PEM2 x8 */ |
| 1489 | qlm_mode[qlm] = CVMX_QLM_MODE_PCIE_1X8; |
| 1490 | } else { |
| 1491 | /* PEM3 x4 */ |
| 1492 | qlm_mode[qlm] = CVMX_QLM_MODE_PCIE; |
| 1493 | } |
| 1494 | break; |
| 1495 | } |
| 1496 | default: |
| 1497 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1498 | break; |
| 1499 | } |
| 1500 | } else if (gserx_cfg.s.bgx) { |
| 1501 | cvmx_bgxx_cmrx_config_t cmr_config; |
| 1502 | cvmx_bgxx_cmr_rx_lmacs_t bgx_cmr_rx_lmacs; |
| 1503 | cvmx_bgxx_spux_br_pmd_control_t pmd_control; |
| 1504 | int bgx = 0; |
| 1505 | int start = 0, end = 4, index; |
| 1506 | int lane_mask = 0, train_mask = 0; |
| 1507 | int mux = 0; // 0:BGX2 (DLM5/DLM6), 1:BGX2(DLM5), 2:BGX2(DLM6) |
| 1508 | |
| 1509 | if (qlm < 4) { |
| 1510 | bgx = qlm - 2; |
| 1511 | } else if (qlm == 5 || qlm == 6) { |
| 1512 | bgx = 2; |
| 1513 | mux = cvmx_qlm_mux_interface(bgx); |
| 1514 | if (mux == 0) { |
| 1515 | start = 0; |
| 1516 | end = 4; |
| 1517 | } else if (mux == 1) { |
| 1518 | start = 0; |
| 1519 | end = 2; |
| 1520 | } else if (mux == 2) { |
| 1521 | start = 2; |
| 1522 | end = 4; |
| 1523 | } else { |
| 1524 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1525 | return qlm_mode[qlm]; |
| 1526 | } |
| 1527 | } |
| 1528 | |
| 1529 | for (index = start; index < end; index++) { |
| 1530 | cmr_config.u64 = csr_rd(CVMX_BGXX_CMRX_CONFIG(index, bgx)); |
| 1531 | pmd_control.u64 = csr_rd(CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, bgx)); |
| 1532 | lane_mask |= (cmr_config.s.lmac_type << (index * 4)); |
| 1533 | train_mask |= (pmd_control.s.train_en << (index * 4)); |
| 1534 | } |
| 1535 | |
| 1536 | /* Need to include DLM5 lmacs when only DLM6 DLM is used */ |
| 1537 | if (mux == 2) |
| 1538 | bgx_cmr_rx_lmacs.u64 = csr_rd(CVMX_BGXX_CMR_RX_LMACS(2)); |
| 1539 | switch (lane_mask) { |
| 1540 | case 0: |
| 1541 | if (mux == 1) { |
| 1542 | qlm_mode[qlm] = CVMX_QLM_MODE_SGMII_2X1; |
| 1543 | } else if (mux == 2) { |
| 1544 | qlm_mode[qlm] = CVMX_QLM_MODE_SGMII_2X1; |
| 1545 | bgx_cmr_rx_lmacs.s.lmacs = 4; |
| 1546 | } |
| 1547 | qlm_mode[qlm] = CVMX_QLM_MODE_SGMII; |
| 1548 | break; |
| 1549 | case 0x1: |
| 1550 | qlm_mode[qlm] = CVMX_QLM_MODE_XAUI; |
| 1551 | break; |
| 1552 | case 0x2: |
| 1553 | if (mux == 1) { |
| 1554 | // NONE+RXAUI |
| 1555 | qlm_mode[qlm] = CVMX_QLM_MODE_RXAUI_1X2; |
| 1556 | } else if (mux == 0) { |
| 1557 | // RXAUI+SGMII |
| 1558 | qlm_mode[qlm] = CVMX_QLM_MODE_MIXED; |
| 1559 | } else { |
| 1560 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1561 | } |
| 1562 | break; |
| 1563 | case 0x202: |
| 1564 | if (mux == 2) { |
| 1565 | // RXAUI+RXAUI |
| 1566 | qlm_mode[qlm] = CVMX_QLM_MODE_RXAUI_1X2; |
| 1567 | bgx_cmr_rx_lmacs.s.lmacs = 4; |
| 1568 | } else if (mux == 1) { |
| 1569 | // RXAUI+RXAUI |
| 1570 | qlm_mode[qlm] = CVMX_QLM_MODE_RXAUI_1X2; |
| 1571 | } else if (mux == 0) { |
| 1572 | qlm_mode[qlm] = CVMX_QLM_MODE_RXAUI; |
| 1573 | } else { |
| 1574 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1575 | } |
| 1576 | break; |
| 1577 | case 0x22: |
| 1578 | qlm_mode[qlm] = CVMX_QLM_MODE_RXAUI; |
| 1579 | break; |
| 1580 | case 0x3333: |
| 1581 | /* |
| 1582 | * Use training to determine if we're in 10GBASE-KR |
| 1583 | * or XFI |
| 1584 | */ |
| 1585 | if (train_mask) |
| 1586 | qlm_mode[qlm] = CVMX_QLM_MODE_10G_KR; |
| 1587 | else |
| 1588 | qlm_mode[qlm] = CVMX_QLM_MODE_XFI; |
| 1589 | break; |
| 1590 | case 0x4: |
| 1591 | /* |
| 1592 | * Use training to determine if we're in 40GBASE-KR |
| 1593 | * or XLAUI |
| 1594 | */ |
| 1595 | if (train_mask) |
| 1596 | qlm_mode[qlm] = CVMX_QLM_MODE_40G_KR4; |
| 1597 | else |
| 1598 | qlm_mode[qlm] = CVMX_QLM_MODE_XLAUI; |
| 1599 | break; |
| 1600 | case 0x0005: |
| 1601 | qlm_mode[qlm] = CVMX_QLM_MODE_RGMII_SGMII; |
| 1602 | break; |
| 1603 | case 0x3335: |
| 1604 | if (train_mask) |
| 1605 | qlm_mode[qlm] = CVMX_QLM_MODE_RGMII_10G_KR; |
| 1606 | else |
| 1607 | qlm_mode[qlm] = CVMX_QLM_MODE_RGMII_XFI; |
| 1608 | break; |
| 1609 | case 0x45: |
| 1610 | if (train_mask) |
| 1611 | qlm_mode[qlm] = CVMX_QLM_MODE_RGMII_40G_KR4; |
| 1612 | else |
| 1613 | qlm_mode[qlm] = CVMX_QLM_MODE_RGMII_XLAUI; |
| 1614 | break; |
| 1615 | case 0x225: |
| 1616 | qlm_mode[qlm] = CVMX_QLM_MODE_RGMII_RXAUI; |
| 1617 | break; |
| 1618 | case 0x15: |
| 1619 | qlm_mode[qlm] = CVMX_QLM_MODE_RGMII_XAUI; |
| 1620 | break; |
| 1621 | |
| 1622 | case 0x200: |
| 1623 | if (mux == 2) { |
| 1624 | qlm_mode[qlm] = CVMX_QLM_MODE_RXAUI_1X2; |
| 1625 | bgx_cmr_rx_lmacs.s.lmacs = 4; |
| 1626 | } else |
| 1627 | case 0x205: |
| 1628 | case 0x233: |
| 1629 | case 0x3302: |
| 1630 | case 0x3305: |
| 1631 | if (mux == 0) |
| 1632 | qlm_mode[qlm] = CVMX_QLM_MODE_MIXED; |
| 1633 | else |
| 1634 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1635 | break; |
| 1636 | case 0x3300: |
| 1637 | if (mux == 0) { |
| 1638 | qlm_mode[qlm] = CVMX_QLM_MODE_MIXED; |
| 1639 | } else if (mux == 2) { |
| 1640 | if (train_mask) |
| 1641 | qlm_mode[qlm] = CVMX_QLM_MODE_10G_KR_1X2; |
| 1642 | else |
| 1643 | qlm_mode[qlm] = CVMX_QLM_MODE_XFI_1X2; |
| 1644 | bgx_cmr_rx_lmacs.s.lmacs = 4; |
| 1645 | } else { |
| 1646 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1647 | } |
| 1648 | break; |
| 1649 | case 0x33: |
| 1650 | if (mux == 1 || mux == 2) { |
| 1651 | if (train_mask) |
| 1652 | qlm_mode[qlm] = CVMX_QLM_MODE_10G_KR_1X2; |
| 1653 | else |
| 1654 | qlm_mode[qlm] = CVMX_QLM_MODE_XFI_1X2; |
| 1655 | if (mux == 2) |
| 1656 | bgx_cmr_rx_lmacs.s.lmacs = 4; |
| 1657 | } else { |
| 1658 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1659 | } |
| 1660 | break; |
| 1661 | case 0x0035: |
| 1662 | if (mux == 0) |
| 1663 | qlm_mode[qlm] = CVMX_QLM_MODE_MIXED; |
| 1664 | else if (train_mask) |
| 1665 | qlm_mode[qlm] = CVMX_QLM_MODE_RGMII_10G_KR_1X1; |
| 1666 | else |
| 1667 | qlm_mode[qlm] = CVMX_QLM_MODE_RGMII_XFI_1X1; |
| 1668 | break; |
| 1669 | case 0x235: |
| 1670 | if (mux == 0) |
| 1671 | qlm_mode[qlm] = CVMX_QLM_MODE_MIXED; |
| 1672 | else |
| 1673 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1674 | break; |
| 1675 | default: |
| 1676 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1677 | break; |
| 1678 | } |
| 1679 | if (mux == 2) { |
| 1680 | csr_wr(CVMX_BGXX_CMR_RX_LMACS(2), bgx_cmr_rx_lmacs.u64); |
| 1681 | csr_wr(CVMX_BGXX_CMR_TX_LMACS(2), bgx_cmr_rx_lmacs.u64); |
| 1682 | } |
| 1683 | } else if (gserx_cfg.s.sata) { |
| 1684 | qlm_mode[qlm] = CVMX_QLM_MODE_SATA_2X1; |
| 1685 | } else { |
| 1686 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1687 | } |
| 1688 | |
| 1689 | return qlm_mode[qlm]; |
| 1690 | } |
| 1691 | |
| 1692 | enum cvmx_qlm_mode __cvmx_qlm_get_mode_cnf75xx(int qlm) |
| 1693 | { |
| 1694 | cvmx_gserx_cfg_t gserx_cfg; |
| 1695 | int qlm_mode[9] = { -1, -1, -1, -1, -1, -1, -1 }; |
| 1696 | |
| 1697 | if (qlm_mode[qlm] != -1) |
| 1698 | return qlm_mode[qlm]; |
| 1699 | |
| 1700 | if (qlm > 9) { |
| 1701 | debug("Invalid QLM(%d) passed\n", qlm); |
| 1702 | return -1; |
| 1703 | } |
| 1704 | |
| 1705 | if ((qlm == 2 || qlm == 3) && (OCTEON_IS_MODEL(OCTEON_CNF75XX))) { |
| 1706 | cvmx_sriox_status_reg_t status_reg; |
| 1707 | int port = (qlm == 2) ? 0 : 1; |
| 1708 | |
| 1709 | status_reg.u64 = csr_rd(CVMX_SRIOX_STATUS_REG(port)); |
| 1710 | /* FIXME add different width */ |
| 1711 | if (status_reg.s.srio) |
| 1712 | qlm_mode[qlm] = CVMX_QLM_MODE_SRIO_1X4; |
| 1713 | else |
| 1714 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1715 | return qlm_mode[qlm]; |
| 1716 | } |
| 1717 | |
| 1718 | gserx_cfg.u64 = csr_rd(CVMX_GSERX_CFG(qlm)); |
| 1719 | if (gserx_cfg.s.pcie) { |
| 1720 | switch (qlm) { |
| 1721 | case 0: /* Either PEM0 x2 or PEM0 x4 */ |
| 1722 | case 1: /* Either PEM1 x2 or PEM0 x4 */ |
| 1723 | { |
| 1724 | /* FIXME later */ |
| 1725 | qlm_mode[qlm] = CVMX_QLM_MODE_PCIE; |
| 1726 | break; |
| 1727 | } |
| 1728 | default: |
| 1729 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1730 | break; |
| 1731 | } |
| 1732 | } else if (gserx_cfg.s.bgx) { |
| 1733 | cvmx_bgxx_cmrx_config_t cmr_config; |
| 1734 | cvmx_bgxx_spux_br_pmd_control_t pmd_control; |
| 1735 | int bgx = 0; |
| 1736 | int start = 0, end = 4, index; |
| 1737 | int lane_mask = 0, train_mask = 0; |
| 1738 | int mux = 0; // 0:BGX0 (DLM4/DLM5), 1:BGX0(DLM4), 2:BGX0(DLM5) |
| 1739 | cvmx_gserx_cfg_t gser1, gser2; |
| 1740 | |
| 1741 | gser1.u64 = csr_rd(CVMX_GSERX_CFG(4)); |
| 1742 | gser2.u64 = csr_rd(CVMX_GSERX_CFG(5)); |
| 1743 | if (gser1.s.bgx && gser2.s.bgx) { |
| 1744 | start = 0; |
| 1745 | end = 4; |
| 1746 | } else if (gser1.s.bgx) { |
| 1747 | start = 0; |
| 1748 | end = 2; |
| 1749 | mux = 1; |
| 1750 | } else if (gser2.s.bgx) { |
| 1751 | start = 2; |
| 1752 | end = 4; |
| 1753 | mux = 2; |
| 1754 | } else { |
| 1755 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1756 | return qlm_mode[qlm]; |
| 1757 | } |
| 1758 | |
| 1759 | for (index = start; index < end; index++) { |
| 1760 | cmr_config.u64 = csr_rd(CVMX_BGXX_CMRX_CONFIG(index, bgx)); |
| 1761 | pmd_control.u64 = csr_rd(CVMX_BGXX_SPUX_BR_PMD_CONTROL(index, bgx)); |
| 1762 | lane_mask |= (cmr_config.s.lmac_type << (index * 4)); |
| 1763 | train_mask |= (pmd_control.s.train_en << (index * 4)); |
| 1764 | } |
| 1765 | |
| 1766 | switch (lane_mask) { |
| 1767 | case 0: |
| 1768 | if (mux == 1 || mux == 2) |
| 1769 | qlm_mode[qlm] = CVMX_QLM_MODE_SGMII_2X1; |
| 1770 | else |
| 1771 | qlm_mode[qlm] = CVMX_QLM_MODE_SGMII; |
| 1772 | break; |
| 1773 | case 0x3300: |
| 1774 | if (mux == 0) |
| 1775 | qlm_mode[qlm] = CVMX_QLM_MODE_MIXED; |
| 1776 | else if (mux == 2) |
| 1777 | if (train_mask) |
| 1778 | qlm_mode[qlm] = CVMX_QLM_MODE_10G_KR_1X2; |
| 1779 | else |
| 1780 | qlm_mode[qlm] = CVMX_QLM_MODE_XFI_1X2; |
| 1781 | else |
| 1782 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1783 | break; |
| 1784 | default: |
| 1785 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1786 | break; |
| 1787 | } |
| 1788 | } else { |
| 1789 | qlm_mode[qlm] = CVMX_QLM_MODE_DISABLED; |
| 1790 | } |
| 1791 | |
| 1792 | return qlm_mode[qlm]; |
| 1793 | } |
| 1794 | |
| 1795 | /* |
| 1796 | * Read QLM and return mode. |
| 1797 | */ |
| 1798 | enum cvmx_qlm_mode cvmx_qlm_get_mode(int qlm) |
| 1799 | { |
| 1800 | if (OCTEON_IS_OCTEON2()) |
| 1801 | return __cvmx_qlm_get_mode_cn6xxx(qlm); |
| 1802 | else if (OCTEON_IS_MODEL(OCTEON_CN70XX)) |
| 1803 | return __cvmx_qlm_get_mode_cn70xx(qlm); |
| 1804 | else if (OCTEON_IS_MODEL(OCTEON_CN78XX)) |
| 1805 | return cvmx_qlm_get_mode_cn78xx(cvmx_get_node_num(), qlm); |
| 1806 | else if (OCTEON_IS_MODEL(OCTEON_CN73XX)) |
| 1807 | return __cvmx_qlm_get_mode_cn73xx(qlm); |
| 1808 | else if (OCTEON_IS_MODEL(OCTEON_CNF75XX)) |
| 1809 | return __cvmx_qlm_get_mode_cnf75xx(qlm); |
| 1810 | |
| 1811 | return CVMX_QLM_MODE_DISABLED; |
| 1812 | } |
| 1813 | |
| 1814 | int cvmx_qlm_measure_clock_cn7xxx(int node, int qlm) |
| 1815 | { |
| 1816 | cvmx_gserx_cfg_t cfg; |
| 1817 | cvmx_gserx_refclk_sel_t refclk_sel; |
| 1818 | cvmx_gserx_lane_mode_t lane_mode; |
| 1819 | |
| 1820 | if (OCTEON_IS_MODEL(OCTEON_CN73XX)) { |
| 1821 | if (node != 0 || qlm >= 7) |
| 1822 | return -1; |
| 1823 | } else if (OCTEON_IS_MODEL(OCTEON_CN78XX)) { |
| 1824 | if (qlm >= 8 || node > 1) |
| 1825 | return -1; /* FIXME for OCI */ |
| 1826 | } else { |
| 1827 | debug("%s: Unsupported OCTEON model\n", __func__); |
| 1828 | return -1; |
| 1829 | } |
| 1830 | |
| 1831 | cfg.u64 = csr_rd_node(node, CVMX_GSERX_CFG(qlm)); |
| 1832 | |
| 1833 | if (cfg.s.pcie) { |
| 1834 | refclk_sel.u64 = csr_rd_node(node, CVMX_GSERX_REFCLK_SEL(qlm)); |
| 1835 | if (refclk_sel.s.pcie_refclk125) |
| 1836 | return REF_125MHZ; /* Ref 125 Mhz */ |
| 1837 | else |
| 1838 | return REF_100MHZ; /* Ref 100Mhz */ |
| 1839 | } |
| 1840 | |
| 1841 | lane_mode.u64 = csr_rd_node(node, CVMX_GSERX_LANE_MODE(qlm)); |
| 1842 | switch (lane_mode.s.lmode) { |
| 1843 | case R_25G_REFCLK100: |
| 1844 | return REF_100MHZ; |
| 1845 | case R_5G_REFCLK100: |
| 1846 | return REF_100MHZ; |
| 1847 | case R_8G_REFCLK100: |
| 1848 | return REF_100MHZ; |
| 1849 | case R_125G_REFCLK15625_KX: |
| 1850 | return REF_156MHZ; |
| 1851 | case R_3125G_REFCLK15625_XAUI: |
| 1852 | return REF_156MHZ; |
| 1853 | case R_103125G_REFCLK15625_KR: |
| 1854 | return REF_156MHZ; |
| 1855 | case R_125G_REFCLK15625_SGMII: |
| 1856 | return REF_156MHZ; |
| 1857 | case R_5G_REFCLK15625_QSGMII: |
| 1858 | return REF_156MHZ; |
| 1859 | case R_625G_REFCLK15625_RXAUI: |
| 1860 | return REF_156MHZ; |
| 1861 | case R_25G_REFCLK125: |
| 1862 | return REF_125MHZ; |
| 1863 | case R_5G_REFCLK125: |
| 1864 | return REF_125MHZ; |
| 1865 | case R_8G_REFCLK125: |
| 1866 | return REF_125MHZ; |
| 1867 | default: |
| 1868 | return 0; |
| 1869 | } |
| 1870 | } |
| 1871 | |
| 1872 | /** |
| 1873 | * Measure the reference clock of a QLM on a multi-node setup |
| 1874 | * |
| 1875 | * @param node node to measure |
| 1876 | * @param qlm QLM to measure |
| 1877 | * |
| 1878 | * @return Clock rate in Hz |
| 1879 | */ |
| 1880 | int cvmx_qlm_measure_clock_node(int node, int qlm) |
| 1881 | { |
| 1882 | if (octeon_has_feature(OCTEON_FEATURE_MULTINODE)) |
| 1883 | return cvmx_qlm_measure_clock_cn7xxx(node, qlm); |
| 1884 | else |
| 1885 | return cvmx_qlm_measure_clock(qlm); |
| 1886 | } |
| 1887 | |
| 1888 | /** |
| 1889 | * Measure the reference clock of a QLM |
| 1890 | * |
| 1891 | * @param qlm QLM to measure |
| 1892 | * |
| 1893 | * @return Clock rate in Hz |
| 1894 | */ |
| 1895 | int cvmx_qlm_measure_clock(int qlm) |
| 1896 | { |
| 1897 | cvmx_mio_ptp_clock_cfg_t ptp_clock; |
| 1898 | u64 count; |
| 1899 | u64 start_cycle, stop_cycle; |
| 1900 | int evcnt_offset = 0x10; |
| 1901 | int incr_count = 1; |
| 1902 | int ref_clock[16] = { 0 }; |
| 1903 | |
| 1904 | if (ref_clock[qlm]) |
| 1905 | return ref_clock[qlm]; |
| 1906 | |
| 1907 | if (OCTEON_IS_OCTEON3() && !OCTEON_IS_MODEL(OCTEON_CN70XX)) |
| 1908 | return cvmx_qlm_measure_clock_cn7xxx(cvmx_get_node_num(), qlm); |
| 1909 | |
| 1910 | if (OCTEON_IS_MODEL(OCTEON_CN70XX) && qlm == 0) { |
| 1911 | cvmx_gserx_dlmx_ref_clkdiv2_t ref_clkdiv2; |
| 1912 | |
| 1913 | ref_clkdiv2.u64 = csr_rd(CVMX_GSERX_DLMX_REF_CLKDIV2(qlm, 0)); |
| 1914 | if (ref_clkdiv2.s.ref_clkdiv2) |
| 1915 | incr_count = 2; |
| 1916 | } |
| 1917 | |
| 1918 | /* Fix reference clock for OCI QLMs */ |
| 1919 | |
| 1920 | /* Disable the PTP event counter while we configure it */ |
| 1921 | ptp_clock.u64 = csr_rd(CVMX_MIO_PTP_CLOCK_CFG); /* For CN63XXp1 errata */ |
| 1922 | ptp_clock.s.evcnt_en = 0; |
| 1923 | csr_wr(CVMX_MIO_PTP_CLOCK_CFG, ptp_clock.u64); |
| 1924 | |
| 1925 | /* Count on rising edge, Choose which QLM to count */ |
| 1926 | ptp_clock.u64 = csr_rd(CVMX_MIO_PTP_CLOCK_CFG); /* For CN63XXp1 errata */ |
| 1927 | ptp_clock.s.evcnt_edge = 0; |
| 1928 | ptp_clock.s.evcnt_in = evcnt_offset + qlm; |
| 1929 | csr_wr(CVMX_MIO_PTP_CLOCK_CFG, ptp_clock.u64); |
| 1930 | |
| 1931 | /* Clear MIO_PTP_EVT_CNT */ |
| 1932 | csr_rd(CVMX_MIO_PTP_EVT_CNT); /* For CN63XXp1 errata */ |
| 1933 | count = csr_rd(CVMX_MIO_PTP_EVT_CNT); |
| 1934 | csr_wr(CVMX_MIO_PTP_EVT_CNT, -count); |
| 1935 | |
| 1936 | /* Set MIO_PTP_EVT_CNT to 1 billion */ |
| 1937 | csr_wr(CVMX_MIO_PTP_EVT_CNT, 1000000000); |
| 1938 | |
| 1939 | /* Enable the PTP event counter */ |
| 1940 | ptp_clock.u64 = csr_rd(CVMX_MIO_PTP_CLOCK_CFG); /* For CN63XXp1 errata */ |
| 1941 | ptp_clock.s.evcnt_en = 1; |
| 1942 | csr_wr(CVMX_MIO_PTP_CLOCK_CFG, ptp_clock.u64); |
| 1943 | |
| 1944 | start_cycle = get_ticks(); |
| 1945 | /* Wait for 50ms */ |
| 1946 | mdelay(50); |
| 1947 | |
| 1948 | /* Read the counter */ |
| 1949 | csr_rd(CVMX_MIO_PTP_EVT_CNT); /* For CN63XXp1 errata */ |
| 1950 | count = csr_rd(CVMX_MIO_PTP_EVT_CNT); |
| 1951 | stop_cycle = get_ticks(); |
| 1952 | |
| 1953 | /* Disable the PTP event counter */ |
| 1954 | ptp_clock.u64 = csr_rd(CVMX_MIO_PTP_CLOCK_CFG); /* For CN63XXp1 errata */ |
| 1955 | ptp_clock.s.evcnt_en = 0; |
| 1956 | csr_wr(CVMX_MIO_PTP_CLOCK_CFG, ptp_clock.u64); |
| 1957 | |
| 1958 | /* Clock counted down, so reverse it */ |
| 1959 | count = 1000000000 - count; |
| 1960 | count *= incr_count; |
| 1961 | |
| 1962 | /* Return the rate */ |
| 1963 | ref_clock[qlm] = count * gd->cpu_clk / (stop_cycle - start_cycle); |
| 1964 | |
| 1965 | return ref_clock[qlm]; |
| 1966 | } |
| 1967 | |
| 1968 | /* |
| 1969 | * Perform RX equalization on a QLM |
| 1970 | * |
| 1971 | * @param node Node the QLM is on |
| 1972 | * @param qlm QLM to perform RX equalization on |
| 1973 | * @param lane Lane to use, or -1 for all lanes |
| 1974 | * |
| 1975 | * @return Zero on success, negative if any lane failed RX equalization |
| 1976 | */ |
| 1977 | int __cvmx_qlm_rx_equalization(int node, int qlm, int lane) |
| 1978 | { |
| 1979 | cvmx_gserx_phy_ctl_t phy_ctl; |
| 1980 | cvmx_gserx_br_rxx_ctl_t rxx_ctl; |
| 1981 | cvmx_gserx_br_rxx_eer_t rxx_eer; |
| 1982 | cvmx_gserx_rx_eie_detsts_t eie_detsts; |
| 1983 | int fail, gbaud, l, lane_mask; |
| 1984 | enum cvmx_qlm_mode mode; |
| 1985 | int max_lanes = cvmx_qlm_get_lanes(qlm); |
| 1986 | cvmx_gserx_lane_mode_t lmode; |
| 1987 | cvmx_gserx_lane_px_mode_1_t pmode_1; |
| 1988 | int pending = 0; |
| 1989 | u64 timeout; |
| 1990 | |
| 1991 | /* Don't touch QLMs if it is reset or powered down */ |
| 1992 | phy_ctl.u64 = csr_rd_node(node, CVMX_GSERX_PHY_CTL(qlm)); |
| 1993 | if (phy_ctl.s.phy_pd || phy_ctl.s.phy_reset) |
| 1994 | return -1; |
| 1995 | |
| 1996 | /* |
| 1997 | * Check whether GSER PRBS pattern matcher is enabled on any of the |
| 1998 | * applicable lanes. Can't complete RX Equalization while pattern |
| 1999 | * matcher is enabled because it causes errors |
| 2000 | */ |
| 2001 | for (l = 0; l < max_lanes; l++) { |
| 2002 | cvmx_gserx_lanex_lbert_cfg_t lbert_cfg; |
| 2003 | |
| 2004 | if (lane != -1 && lane != l) |
| 2005 | continue; |
| 2006 | |
| 2007 | lbert_cfg.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_LBERT_CFG(l, qlm)); |
| 2008 | if (lbert_cfg.s.lbert_pm_en == 1) |
| 2009 | return -1; |
| 2010 | } |
| 2011 | |
| 2012 | /* Get Lane Mode */ |
| 2013 | lmode.u64 = csr_rd_node(node, CVMX_GSERX_LANE_MODE(qlm)); |
| 2014 | |
| 2015 | /* |
| 2016 | * Check to see if in VMA manual mode is set. If in VMA manual mode |
| 2017 | * don't complete rx equalization |
| 2018 | */ |
| 2019 | pmode_1.u64 = csr_rd_node(node, CVMX_GSERX_LANE_PX_MODE_1(lmode.s.lmode, qlm)); |
| 2020 | if (pmode_1.s.vma_mm == 1) { |
| 2021 | #ifdef DEBUG_QLM |
| 2022 | debug("N%d:QLM%d: VMA Manual (manual DFE) selected. Not completing Rx equalization\n", |
| 2023 | node, qlm); |
| 2024 | #endif |
| 2025 | return 0; |
| 2026 | } |
| 2027 | |
| 2028 | if (OCTEON_IS_MODEL(OCTEON_CN78XX)) { |
| 2029 | gbaud = cvmx_qlm_get_gbaud_mhz_node(node, qlm); |
| 2030 | mode = cvmx_qlm_get_mode_cn78xx(node, qlm); |
| 2031 | } else { |
| 2032 | gbaud = cvmx_qlm_get_gbaud_mhz(qlm); |
| 2033 | mode = cvmx_qlm_get_mode(qlm); |
| 2034 | } |
| 2035 | |
| 2036 | /* Apply RX Equalization for speed >= 8G */ |
| 2037 | if (qlm < 8) { |
| 2038 | if (gbaud < 6250) |
| 2039 | return 0; |
| 2040 | } |
| 2041 | |
| 2042 | /* Don't run on PCIe Links */ |
| 2043 | if (mode == CVMX_QLM_MODE_PCIE || mode == CVMX_QLM_MODE_PCIE_1X8 || |
| 2044 | mode == CVMX_QLM_MODE_PCIE_1X2 || mode == CVMX_QLM_MODE_PCIE_2X1) |
| 2045 | return -1; |
| 2046 | |
| 2047 | fail = 0; |
| 2048 | |
| 2049 | /* |
| 2050 | * Before completing Rx equalization wait for |
| 2051 | * GSERx_RX_EIE_DETSTS[CDRLOCK] to be set. |
| 2052 | * This ensures the rx data is valid |
| 2053 | */ |
| 2054 | if (lane == -1) { |
| 2055 | /* |
| 2056 | * check all 4 Lanes (cdrlock = 1111/b) for CDR Lock with |
| 2057 | * lane == -1 |
| 2058 | */ |
| 2059 | if (CVMX_WAIT_FOR_FIELD64_NODE(node, CVMX_GSERX_RX_EIE_DETSTS(qlm), |
| 2060 | cvmx_gserx_rx_eie_detsts_t, cdrlock, ==, |
| 2061 | (1 << max_lanes) - 1, 500)) { |
| 2062 | #ifdef DEBUG_QLM |
| 2063 | eie_detsts.u64 = csr_rd_node(node, CVMX_GSERX_RX_EIE_DETSTS(qlm)); |
| 2064 | debug("ERROR: %d:QLM%d: CDR Lock not detected for all 4 lanes. CDR_LOCK(0x%x)\n", |
| 2065 | node, qlm, eie_detsts.s.cdrlock); |
| 2066 | #endif |
| 2067 | return -1; |
| 2068 | } |
| 2069 | } else { |
| 2070 | if (CVMX_WAIT_FOR_FIELD64_NODE(node, CVMX_GSERX_RX_EIE_DETSTS(qlm), |
| 2071 | cvmx_gserx_rx_eie_detsts_t, cdrlock, &, (1 << lane), |
| 2072 | 500)) { |
| 2073 | #ifdef DEBUG_QLM |
| 2074 | eie_detsts.u64 = csr_rd_node(node, CVMX_GSERX_RX_EIE_DETSTS(qlm)); |
| 2075 | debug("ERROR: %d:QLM%d: CDR Lock not detected for Lane%d CDR_LOCK(0x%x)\n", |
| 2076 | node, qlm, lane, eie_detsts.s.cdrlock); |
| 2077 | #endif |
| 2078 | return -1; |
| 2079 | } |
| 2080 | } |
| 2081 | |
| 2082 | /* |
| 2083 | * Errata (GSER-20075) GSER(0..13)_BR_RX3_EER[RXT_ERR] is |
| 2084 | * GSER(0..13)_BR_RX2_EER[RXT_ERR]. Since lanes 2-3 trigger at the |
| 2085 | * same time, we need to setup lane 3 before we loop through the lanes |
| 2086 | */ |
| 2087 | if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && (lane == -1 || lane == 3)) { |
| 2088 | /* Enable software control */ |
| 2089 | rxx_ctl.u64 = csr_rd_node(node, CVMX_GSERX_BR_RXX_CTL(3, qlm)); |
| 2090 | rxx_ctl.s.rxt_swm = 1; |
| 2091 | csr_wr_node(node, CVMX_GSERX_BR_RXX_CTL(3, qlm), rxx_ctl.u64); |
| 2092 | |
| 2093 | /* Clear the completion flag */ |
| 2094 | rxx_eer.u64 = csr_rd_node(node, CVMX_GSERX_BR_RXX_EER(3, qlm)); |
| 2095 | rxx_eer.s.rxt_esv = 0; |
| 2096 | csr_wr_node(node, CVMX_GSERX_BR_RXX_EER(3, qlm), rxx_eer.u64); |
| 2097 | /* Initiate a new request on lane 2 */ |
| 2098 | if (lane == 3) { |
| 2099 | rxx_eer.u64 = csr_rd_node(node, CVMX_GSERX_BR_RXX_EER(2, qlm)); |
| 2100 | rxx_eer.s.rxt_eer = 1; |
| 2101 | csr_wr_node(node, CVMX_GSERX_BR_RXX_EER(2, qlm), rxx_eer.u64); |
| 2102 | } |
| 2103 | } |
| 2104 | |
| 2105 | for (l = 0; l < max_lanes; l++) { |
| 2106 | if (lane != -1 && lane != l) |
| 2107 | continue; |
| 2108 | |
| 2109 | /* |
| 2110 | * Skip lane 3 on 78p1.x due to Errata (GSER-20075). |
| 2111 | * Handled above |
| 2112 | */ |
| 2113 | if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X) && l == 3) { |
| 2114 | /* |
| 2115 | * Need to add lane 3 to pending list for 78xx |
| 2116 | * pass 1.x |
| 2117 | */ |
| 2118 | pending |= 1 << 3; |
| 2119 | continue; |
| 2120 | } |
| 2121 | /* Enable software control */ |
| 2122 | rxx_ctl.u64 = csr_rd_node(node, CVMX_GSERX_BR_RXX_CTL(l, qlm)); |
| 2123 | rxx_ctl.s.rxt_swm = 1; |
| 2124 | csr_wr_node(node, CVMX_GSERX_BR_RXX_CTL(l, qlm), rxx_ctl.u64); |
| 2125 | |
| 2126 | /* Clear the completion flag and initiate a new request */ |
| 2127 | rxx_eer.u64 = csr_rd_node(node, CVMX_GSERX_BR_RXX_EER(l, qlm)); |
| 2128 | rxx_eer.s.rxt_esv = 0; |
| 2129 | rxx_eer.s.rxt_eer = 1; |
| 2130 | csr_wr_node(node, CVMX_GSERX_BR_RXX_EER(l, qlm), rxx_eer.u64); |
| 2131 | pending |= 1 << l; |
| 2132 | } |
| 2133 | |
| 2134 | /* |
| 2135 | * Wait for 250ms, approx 10x times measured value, as XFI/XLAUI |
| 2136 | * can take 21-23ms, other interfaces can take 2-3ms. |
| 2137 | */ |
| 2138 | timeout = get_timer(0); |
| 2139 | |
| 2140 | lane_mask = 0; |
| 2141 | while (pending) { |
| 2142 | /* Wait for RX equalization to complete */ |
| 2143 | for (l = 0; l < max_lanes; l++) { |
| 2144 | lane_mask = 1 << l; |
| 2145 | /* Only check lanes that are pending */ |
| 2146 | if (!(pending & lane_mask)) |
| 2147 | continue; |
| 2148 | |
| 2149 | /* |
| 2150 | * Read the registers for checking Electrical Idle/CDR |
| 2151 | * lock and the status of the RX equalization |
| 2152 | */ |
| 2153 | eie_detsts.u64 = csr_rd_node(node, CVMX_GSERX_RX_EIE_DETSTS(qlm)); |
| 2154 | rxx_eer.u64 = csr_rd_node(node, CVMX_GSERX_BR_RXX_EER(l, qlm)); |
| 2155 | |
| 2156 | /* |
| 2157 | * Mark failure if lane entered Electrical Idle or lost |
| 2158 | * CDR Lock. The bit for the lane will have cleared in |
| 2159 | * either EIESTS or CDRLOCK |
| 2160 | */ |
| 2161 | if (!(eie_detsts.s.eiests & eie_detsts.s.cdrlock & lane_mask)) { |
| 2162 | fail |= lane_mask; |
| 2163 | pending &= ~lane_mask; |
| 2164 | } else if (rxx_eer.s.rxt_esv) { |
| 2165 | pending &= ~lane_mask; |
| 2166 | } |
| 2167 | } |
| 2168 | |
| 2169 | /* Breakout of the loop on timeout */ |
| 2170 | if (get_timer(timeout) > 250) |
| 2171 | break; |
| 2172 | } |
| 2173 | |
| 2174 | lane_mask = 0; |
| 2175 | /* Cleanup and report status */ |
| 2176 | for (l = 0; l < max_lanes; l++) { |
| 2177 | if (lane != -1 && lane != l) |
| 2178 | continue; |
| 2179 | |
| 2180 | lane_mask = 1 << l; |
| 2181 | rxx_eer.u64 = csr_rd_node(node, CVMX_GSERX_BR_RXX_EER(l, qlm)); |
| 2182 | /* Switch back to hardware control */ |
| 2183 | rxx_ctl.u64 = csr_rd_node(node, CVMX_GSERX_BR_RXX_CTL(l, qlm)); |
| 2184 | rxx_ctl.s.rxt_swm = 0; |
| 2185 | csr_wr_node(node, CVMX_GSERX_BR_RXX_CTL(l, qlm), rxx_ctl.u64); |
| 2186 | |
| 2187 | /* Report status */ |
| 2188 | if (fail & lane_mask) { |
| 2189 | #ifdef DEBUG_QLM |
| 2190 | debug("%d:QLM%d: Lane%d RX equalization lost CDR Lock or entered Electrical Idle\n", |
| 2191 | node, qlm, l); |
| 2192 | #endif |
| 2193 | } else if ((pending & lane_mask) || !rxx_eer.s.rxt_esv) { |
| 2194 | #ifdef DEBUG_QLM |
| 2195 | debug("%d:QLM%d: Lane %d RX equalization timeout\n", node, qlm, l); |
| 2196 | #endif |
| 2197 | fail |= 1 << l; |
| 2198 | } else { |
| 2199 | #ifdef DEBUG_QLM |
| 2200 | char *dir_label[4] = { "Hold", "Inc", "Dec", "Hold" }; |
| 2201 | #ifdef DEBUG_QLM_RX |
| 2202 | cvmx_gserx_lanex_rx_aeq_out_0_t rx_aeq_out_0; |
| 2203 | cvmx_gserx_lanex_rx_aeq_out_1_t rx_aeq_out_1; |
| 2204 | cvmx_gserx_lanex_rx_aeq_out_2_t rx_aeq_out_2; |
| 2205 | cvmx_gserx_lanex_rx_vma_status_0_t rx_vma_status_0; |
| 2206 | #endif |
| 2207 | debug("%d:QLM%d: Lane%d: RX equalization completed.\n", node, qlm, l); |
| 2208 | debug(" Tx Direction Hints TXPRE: %s, TXMAIN: %s, TXPOST: %s, Figure of Merit: %d\n", |
| 2209 | dir_label[(rxx_eer.s.rxt_esm) & 0x3], |
| 2210 | dir_label[((rxx_eer.s.rxt_esm) >> 2) & 0x3], |
| 2211 | dir_label[((rxx_eer.s.rxt_esm) >> 4) & 0x3], rxx_eer.s.rxt_esm >> 6); |
| 2212 | |
| 2213 | #ifdef DEBUG_QLM_RX |
| 2214 | rx_aeq_out_0.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_RX_AEQ_OUT_0(l, qlm)); |
| 2215 | rx_aeq_out_1.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_RX_AEQ_OUT_1(l, qlm)); |
| 2216 | rx_aeq_out_2.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_RX_AEQ_OUT_2(l, qlm)); |
| 2217 | rx_vma_status_0.u64 = |
| 2218 | csr_rd_node(node, CVMX_GSERX_LANEX_RX_VMA_STATUS_0(l, qlm)); |
| 2219 | debug(" DFE Tap1:%lu, Tap2:%ld, Tap3:%ld, Tap4:%ld, Tap5:%ld\n", |
| 2220 | (unsigned int long)cvmx_bit_extract(rx_aeq_out_1.u64, 0, 5), |
| 2221 | (unsigned int long)cvmx_bit_extract_smag(rx_aeq_out_1.u64, 5, 9), |
| 2222 | (unsigned int long)cvmx_bit_extract_smag(rx_aeq_out_1.u64, 10, 14), |
| 2223 | (unsigned int long)cvmx_bit_extract_smag(rx_aeq_out_0.u64, 0, 4), |
| 2224 | (unsigned int long)cvmx_bit_extract_smag(rx_aeq_out_0.u64, 5, 9)); |
| 2225 | debug(" Pre-CTLE Gain:%lu, Post-CTLE Gain:%lu, CTLE Peak:%lu, CTLE Pole:%lu\n", |
| 2226 | (unsigned int long)cvmx_bit_extract(rx_aeq_out_2.u64, 4, 4), |
| 2227 | (unsigned int long)cvmx_bit_extract(rx_aeq_out_2.u64, 0, 4), |
| 2228 | (unsigned int long)cvmx_bit_extract(rx_vma_status_0.u64, 2, 4), |
| 2229 | (unsigned int long)cvmx_bit_extract(rx_vma_status_0.u64, 0, 2)); |
| 2230 | #endif |
| 2231 | #endif |
| 2232 | } |
| 2233 | } |
| 2234 | |
| 2235 | return (fail) ? -1 : 0; |
| 2236 | } |
| 2237 | |
| 2238 | /** |
| 2239 | * Errata GSER-27882 -GSER 10GBASE-KR Transmit Equalizer |
| 2240 | * Training may not update PHY Tx Taps. This function is not static |
| 2241 | * so we can share it with BGX KR |
| 2242 | * |
| 2243 | * @param node Node to apply errata workaround |
| 2244 | * @param qlm QLM to apply errata workaround |
| 2245 | * @param lane Lane to apply the errata |
| 2246 | */ |
| 2247 | int cvmx_qlm_gser_errata_27882(int node, int qlm, int lane) |
| 2248 | { |
| 2249 | cvmx_gserx_lanex_pcs_ctlifc_0_t clifc0; |
| 2250 | cvmx_gserx_lanex_pcs_ctlifc_2_t clifc2; |
| 2251 | |
| 2252 | if (!(OCTEON_IS_MODEL(OCTEON_CN73XX_PASS1_0) || OCTEON_IS_MODEL(OCTEON_CN73XX_PASS1_1) || |
| 2253 | OCTEON_IS_MODEL(OCTEON_CN73XX_PASS1_2) || OCTEON_IS_MODEL(OCTEON_CNF75XX_PASS1_0) || |
| 2254 | OCTEON_IS_MODEL(OCTEON_CN78XX))) |
| 2255 | return 0; |
| 2256 | |
| 2257 | if (CVMX_WAIT_FOR_FIELD64_NODE(node, CVMX_GSERX_RX_EIE_DETSTS(qlm), |
| 2258 | cvmx_gserx_rx_eie_detsts_t, cdrlock, &, |
| 2259 | (1 << lane), 200)) |
| 2260 | return -1; |
| 2261 | |
| 2262 | clifc0.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_0(lane, qlm)); |
| 2263 | clifc0.s.cfg_tx_coeff_req_ovrrd_val = 1; |
| 2264 | csr_wr_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_0(lane, qlm), clifc0.u64); |
| 2265 | clifc2.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_2(lane, qlm)); |
| 2266 | clifc2.s.cfg_tx_coeff_req_ovrrd_en = 1; |
| 2267 | csr_wr_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_2(lane, qlm), clifc2.u64); |
| 2268 | clifc2.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_2(lane, qlm)); |
| 2269 | clifc2.s.ctlifc_ovrrd_req = 1; |
| 2270 | csr_wr_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_2(lane, qlm), clifc2.u64); |
| 2271 | clifc2.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_2(lane, qlm)); |
| 2272 | clifc2.s.cfg_tx_coeff_req_ovrrd_en = 0; |
| 2273 | csr_wr_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_2(lane, qlm), clifc2.u64); |
| 2274 | clifc2.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_2(lane, qlm)); |
| 2275 | clifc2.s.ctlifc_ovrrd_req = 1; |
| 2276 | csr_wr_node(node, CVMX_GSERX_LANEX_PCS_CTLIFC_2(lane, qlm), clifc2.u64); |
| 2277 | return 0; |
| 2278 | } |
| 2279 | |
| 2280 | /** |
| 2281 | * Updates the RX EQ Default Settings Update (CTLE Bias) to support longer |
| 2282 | * SERDES channels |
| 2283 | * |
| 2284 | * @INTERNAL |
| 2285 | * |
| 2286 | * @param node Node number to configure |
| 2287 | * @param qlm QLM number to configure |
| 2288 | */ |
| 2289 | void cvmx_qlm_gser_errata_25992(int node, int qlm) |
| 2290 | { |
| 2291 | int lane; |
| 2292 | int num_lanes = cvmx_qlm_get_lanes(qlm); |
| 2293 | |
| 2294 | if (!(OCTEON_IS_MODEL(OCTEON_CN73XX_PASS1_0) || OCTEON_IS_MODEL(OCTEON_CN73XX_PASS1_1) || |
| 2295 | OCTEON_IS_MODEL(OCTEON_CN73XX_PASS1_2) || OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))) |
| 2296 | return; |
| 2297 | |
| 2298 | for (lane = 0; lane < num_lanes; lane++) { |
| 2299 | cvmx_gserx_lanex_rx_ctle_ctrl_t rx_ctle_ctrl; |
| 2300 | cvmx_gserx_lanex_rx_cfg_4_t rx_cfg_4; |
| 2301 | |
| 2302 | rx_ctle_ctrl.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_RX_CTLE_CTRL(lane, qlm)); |
| 2303 | rx_ctle_ctrl.s.pcs_sds_rx_ctle_bias_ctrl = 3; |
| 2304 | csr_wr_node(node, CVMX_GSERX_LANEX_RX_CTLE_CTRL(lane, qlm), rx_ctle_ctrl.u64); |
| 2305 | |
| 2306 | rx_cfg_4.u64 = csr_rd_node(node, CVMX_GSERX_LANEX_RX_CFG_4(lane, qlm)); |
| 2307 | rx_cfg_4.s.cfg_rx_errdet_ctrl = 0xcd6f; |
| 2308 | csr_wr_node(node, CVMX_GSERX_LANEX_RX_CFG_4(lane, qlm), rx_cfg_4.u64); |
| 2309 | } |
| 2310 | } |
| 2311 | |
| 2312 | void cvmx_qlm_display_registers(int qlm) |
| 2313 | { |
| 2314 | int num_lanes = cvmx_qlm_get_lanes(qlm); |
| 2315 | int lane; |
| 2316 | const __cvmx_qlm_jtag_field_t *ptr = cvmx_qlm_jtag_get_field(); |
| 2317 | |
| 2318 | debug("%29s", "Field[<stop bit>:<start bit>]"); |
| 2319 | for (lane = 0; lane < num_lanes; lane++) |
| 2320 | debug("\t Lane %d", lane); |
| 2321 | debug("\n"); |
| 2322 | |
| 2323 | while (ptr && ptr->name) { |
| 2324 | debug("%20s[%3d:%3d]", ptr->name, ptr->stop_bit, ptr->start_bit); |
| 2325 | for (lane = 0; lane < num_lanes; lane++) { |
| 2326 | u64 val; |
| 2327 | int tx_byp = 0; |
| 2328 | |
| 2329 | /* |
| 2330 | * Make sure serdes_tx_byp is set for displaying |
| 2331 | * TX amplitude and TX demphasis field values. |
| 2332 | */ |
| 2333 | if (strncmp(ptr->name, "biasdrv_", 8) == 0 || |
| 2334 | strncmp(ptr->name, "tcoeff_", 7) == 0) { |
| 2335 | tx_byp = cvmx_qlm_jtag_get(qlm, lane, "serdes_tx_byp"); |
| 2336 | if (tx_byp == 0) { |
| 2337 | debug("\t \t"); |
| 2338 | continue; |
| 2339 | } |
| 2340 | } |
| 2341 | val = cvmx_qlm_jtag_get(qlm, lane, ptr->name); |
| 2342 | debug("\t%4llu (0x%04llx)", (unsigned long long)val, |
| 2343 | (unsigned long long)val); |
| 2344 | } |
| 2345 | debug("\n"); |
| 2346 | ptr++; |
| 2347 | } |
| 2348 | } |
| 2349 | |
| 2350 | /* ToDo: CVMX_DUMP_GSER removed for now (unused!) */ |