Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 93743d241c64bc1f7ecbf3262d1683176551e11f / . / src / arm64 / qcom / pm8916.dtsi
blob: 4b2e8fb47d2da13cd1a80bae044f38cc410a2feb [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2#include <dt-bindings/iio/qcom,spmi-vadc.h>
3#include <dt-bindings/input/linux-event-codes.h>
4#include <dt-bindings/interrupt-controller/irq.h>
5#include <dt-bindings/spmi/spmi.h>
6
7&spmi_bus {
8
9 pm8916_0: pmic@0 {
10 compatible = "qcom,pm8916", "qcom,spmi-pmic";
11 reg = <0x0 SPMI_USID>;
12 #address-cells = <1>;
13 #size-cells = <0>;
14
15 pon@800 {
16 compatible = "qcom,pm8916-pon";
17 reg = <0x800>;
18 mode-bootloader = <0x2>;
19 mode-recovery = <0x1>;
20
21 pwrkey {
22 compatible = "qcom,pm8941-pwrkey";
23 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
24 debounce = <15625>;
25 bias-pull-up;
26 linux,code = <KEY_POWER>;
27 };
28
29 pm8916_resin: resin {
30 compatible = "qcom,pm8941-resin";
31 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
32 debounce = <15625>;
33 bias-pull-up;
34 status = "disabled";
35 };
36
37 watchdog {
38 compatible = "qcom,pm8916-wdt";
39 interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
40 timeout-sec = <60>;
41 };
42 };
43
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame^]44 pm8916_charger: charger@1000 {
45 compatible = "qcom,pm8916-lbc";
46 reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
47 reg-names = "chgr", "bat_if", "usb", "misc";
48
49 interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
50 <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
51 <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
52 <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
53 <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
54 <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
55 <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
56 <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
57 <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
58 <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
59 interrupt-names = "vbat_det",
60 "fast_chg",
61 "chg_fail",
62 "chg_done",
63 "bat_pres",
64 "temp_ok",
65 "coarse_det",
66 "usb_vbus",
67 "chg_gone",
68 "overtemp";
69
70 status = "disabled";
71 };
72
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]73 pm8916_usbin: usb-detect@1300 {
74 compatible = "qcom,pm8941-misc";
75 reg = <0x1300>;
76 interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>;
77 interrupt-names = "usb_vbus";
78 status = "disabled";
79 };
80
81 pm8916_temp: temp-alarm@2400 {
82 compatible = "qcom,spmi-temp-alarm";
83 reg = <0x2400>;
84 interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
85 io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
86 io-channel-names = "thermal";
87 #thermal-sensor-cells = <0>;
88 };
89
90 pm8916_vadc: adc@3100 {
91 compatible = "qcom,spmi-vadc";
92 reg = <0x3100>;
93 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
94 #address-cells = <1>;
95 #size-cells = <0>;
96 #io-channel-cells = <1>;
97
98 channel@0 {
99 reg = <VADC_USBIN>;
100 qcom,pre-scaling = <1 10>;
101 };
102 channel@7 {
103 reg = <VADC_VSYS>;
104 qcom,pre-scaling = <1 3>;
105 };
106 channel@8 {
107 reg = <VADC_DIE_TEMP>;
108 };
109 channel@9 {
110 reg = <VADC_REF_625MV>;
111 };
112 channel@a {
113 reg = <VADC_REF_1250MV>;
114 };
115 channel@e {
116 reg = <VADC_GND_REF>;
117 };
118 channel@f {
119 reg = <VADC_VDD_VADC>;
120 };
121 };
122
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame^]123 pm8916_bms: battery@4000 {
124 compatible = "qcom,pm8916-bms-vm";
125 reg = <0x4000>;
126 interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
127 <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
128 <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
129 <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
130 <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
131 <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
132 interrupt-names = "cv_leave",
133 "cv_enter",
134 "ocv_good",
135 "ocv_thr",
136 "fifo",
137 "state_chg";
138
139 status = "disabled";
140 };
141
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]142 rtc@6000 {
143 compatible = "qcom,pm8941-rtc";
144 reg = <0x6000>, <0x6100>;
145 reg-names = "rtc", "alarm";
146 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
147 };
148
149 pm8916_mpps: mpps@a000 {
150 compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp";
151 reg = <0xa000>;
152 gpio-controller;
153 #gpio-cells = <2>;
154 gpio-ranges = <&pm8916_mpps 0 0 4>;
155 interrupt-controller;
156 #interrupt-cells = <2>;
157 };
158
159 pm8916_gpios: gpio@c000 {
160 compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
161 reg = <0xc000>;
162 gpio-controller;
163 gpio-ranges = <&pm8916_gpios 0 0 4>;
164 #gpio-cells = <2>;
165 interrupt-controller;
166 #interrupt-cells = <2>;
167 };
168 };
169
170 pm8916_1: pmic@1 {
171 compatible = "qcom,pm8916", "qcom,spmi-pmic";
172 reg = <0x1 SPMI_USID>;
173 #address-cells = <1>;
174 #size-cells = <0>;
175
176 pm8916_pwm: pwm {
177 compatible = "qcom,pm8916-pwm";
178
179 #pwm-cells = <2>;
180
181 status = "disabled";
182 };
183
184 pm8916_vib: vibrator@c000 {
185 compatible = "qcom,pm8916-vib";
186 reg = <0xc000>;
187 status = "disabled";
188 };
189
190 pm8916_codec: audio-codec@f000 {
191 compatible = "qcom,pm8916-wcd-analog-codec";
192 reg = <0xf000>;
193 interrupt-parent = <&spmi_bus>;
194 interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
195 <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
196 <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
197 <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
198 <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
199 <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
200 <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
201 <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
202 <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
203 <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
204 <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
205 <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
206 <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
207 <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
208 interrupt-names = "cdc_spk_cnp_int",
209 "cdc_spk_clip_int",
210 "cdc_spk_ocp_int",
211 "mbhc_ins_rem_det1",
212 "mbhc_but_rel_det",
213 "mbhc_but_press_det",
214 "mbhc_ins_rem_det",
215 "mbhc_switch_int",
216 "cdc_ear_ocp_int",
217 "cdc_hphr_ocp_int",
218 "cdc_hphl_ocp_det",
219 "cdc_ear_cnp_int",
220 "cdc_hphr_cnp_int",
221 "cdc_hphl_cnp_int";
222 #sound-dai-cells = <1>;
223 status = "disabled";
224 };
225 };
226};