Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 93743d241c64bc1f7ecbf3262d1683176551e11f / . / src / arm64 / freescale / imx8mm-venice-gw7902.dts
blob: c11260c26d0b43b67c19852119eda98e3364cb9a [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2021 Gateworks Corporation
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/linux-event-codes.h>
10#include <dt-bindings/leds/common.h>
11#include <dt-bindings/net/ti-dp83867.h>
12#include <dt-bindings/phy/phy-imx8-pcie.h>
13
14#include "imx8mm.dtsi"
15
16/ {
17 model = "Gateworks Venice GW7902 i.MX8MM board";
18 compatible = "gw,imx8mm-gw7902", "fsl,imx8mm";
19
20 aliases {
21 ethernet1 = &eth1;
22 usb0 = &usbotg1;
23 usb1 = &usbotg2;
24 };
25
26 chosen {
27 stdout-path = &uart2;
28 };
29
30 memory@40000000 {
31 device_type = "memory";
32 reg = <0x0 0x40000000 0 0x80000000>;
33 };
34
35 can20m: can20m {
36 compatible = "fixed-clock";
37 #clock-cells = <0>;
38 clock-frequency = <20000000>;
39 clock-output-names = "can20m";
40 };
41
42 gpio-keys {
43 compatible = "gpio-keys";
44
45 key-user-pb {
46 label = "user_pb";
47 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
48 linux,code = <BTN_0>;
49 };
50
51 key-user-pb1x {
52 label = "user_pb1x";
53 linux,code = <BTN_1>;
54 interrupt-parent = <&gsc>;
55 interrupts = <0>;
56 };
57
58 key-erased {
59 label = "key_erased";
60 linux,code = <BTN_2>;
61 interrupt-parent = <&gsc>;
62 interrupts = <1>;
63 };
64
65 key-eeprom-wp {
66 label = "eeprom_wp";
67 linux,code = <BTN_3>;
68 interrupt-parent = <&gsc>;
69 interrupts = <2>;
70 };
71
72 key-tamper {
73 label = "tamper";
74 linux,code = <BTN_4>;
75 interrupt-parent = <&gsc>;
76 interrupts = <5>;
77 };
78
79 switch-hold {
80 label = "switch_hold";
81 linux,code = <BTN_5>;
82 interrupt-parent = <&gsc>;
83 interrupts = <7>;
84 };
85 };
86
87 led-controller {
88 compatible = "gpio-leds";
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_gpio_leds>;
91
92 led-0 {
93 function = LED_FUNCTION_STATUS;
94 color = <LED_COLOR_ID_GREEN>;
95 label = "panel1";
96 gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
97 default-state = "off";
98 };
99
100 led-1 {
101 function = LED_FUNCTION_STATUS;
102 color = <LED_COLOR_ID_GREEN>;
103 label = "panel2";
104 gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
105 default-state = "off";
106 };
107
108 led-2 {
109 function = LED_FUNCTION_STATUS;
110 color = <LED_COLOR_ID_GREEN>;
111 label = "panel3";
112 gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
113 default-state = "off";
114 };
115
116 led-3 {
117 function = LED_FUNCTION_STATUS;
118 color = <LED_COLOR_ID_GREEN>;
119 label = "panel4";
120 gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
121 default-state = "off";
122 };
123
124 led-4 {
125 function = LED_FUNCTION_STATUS;
126 color = <LED_COLOR_ID_GREEN>;
127 label = "panel5";
128 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
129 default-state = "off";
130 };
131 };
132
133 pcie0_refclk: pcie0-refclk {
134 compatible = "fixed-clock";
135 #clock-cells = <0>;
136 clock-frequency = <100000000>;
137 };
138
139 pps {
140 compatible = "pps-gpio";
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_pps>;
143 gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
144 status = "okay";
145 };
146
147 reg_3p3v: regulator-3p3v {
148 compatible = "regulator-fixed";
149 regulator-name = "3P3V";
150 regulator-min-microvolt = <3300000>;
151 regulator-max-microvolt = <3300000>;
152 regulator-always-on;
153 };
154
155 reg_usb1_vbus: regulator-usb1 {
156 compatible = "regulator-fixed";
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_reg_usb1>;
159 regulator-name = "usb_usb1_vbus";
160 gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
161 enable-active-high;
162 regulator-min-microvolt = <5000000>;
163 regulator-max-microvolt = <5000000>;
164 };
165
166 reg_wifi: regulator-wifi {
167 compatible = "regulator-fixed";
168 pinctrl-names = "default";
169 pinctrl-0 = <&pinctrl_reg_wl>;
170 regulator-name = "wifi";
171 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
172 enable-active-high;
173 startup-delay-us = <100>;
174 regulator-min-microvolt = <3300000>;
175 regulator-max-microvolt = <3300000>;
176 };
177};
178
179&A53_0 {
180 cpu-supply = <&buck2>;
181};
182
183&A53_1 {
184 cpu-supply = <&buck2>;
185};
186
187&A53_2 {
188 cpu-supply = <&buck2>;
189};
190
191&A53_3 {
192 cpu-supply = <&buck2>;
193};
194
195&ddrc {
196 operating-points-v2 = <&ddrc_opp_table>;
197
198 ddrc_opp_table: opp-table {
199 compatible = "operating-points-v2";
200
201 opp-25000000 {
202 opp-hz = /bits/ 64 <25000000>;
203 };
204
205 opp-100000000 {
206 opp-hz = /bits/ 64 <100000000>;
207 };
208
209 opp-750000000 {
210 opp-hz = /bits/ 64 <750000000>;
211 };
212 };
213};
214
215&ecspi1 {
216 pinctrl-names = "default";
217 pinctrl-0 = <&pinctrl_spi1>;
218 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
219 status = "okay";
220
221 can@0 {
222 compatible = "microchip,mcp2515";
223 reg = <0>;
224 clocks = <&can20m>;
225 interrupt-parent = <&gpio2>;
226 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
227 spi-max-frequency = <10000000>;
228 };
229};
230
231/* off-board header */
232&ecspi2 {
233 pinctrl-names = "default";
234 pinctrl-0 = <&pinctrl_spi2>;
235 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
236 status = "okay";
237};
238
239&fec1 {
240 pinctrl-names = "default";
241 pinctrl-0 = <&pinctrl_fec1>;
242 phy-mode = "rgmii-id";
243 phy-handle = <&ethphy0>;
244 local-mac-address = [00 00 00 00 00 00];
245 status = "okay";
246
247 mdio {
248 #address-cells = <1>;
249 #size-cells = <0>;
250
251 ethphy0: ethernet-phy@0 {
252 compatible = "ethernet-phy-ieee802.3-c22";
253 reg = <0>;
254 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
255 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
256 tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
257 rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
258 };
259 };
260};
261
262&gpio1 {
263 gpio-line-names = "", "", "", "", "", "", "", "",
264 "m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
265 "", "", "", "", "", "", "", "",
266 "", "", "", "", "", "", "", "";
267};
268
269&gpio2 {
270 gpio-line-names = "", "", "", "", "", "", "", "",
271 "uart2_en#", "", "", "", "", "", "", "",
272 "", "", "", "", "", "", "", "",
273 "", "", "", "", "", "", "", "";
274};
275
276&gpio3 {
277 gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
278 "", "", "", "", "", "", "", "",
279 "", "", "", "", "", "", "", "",
280 "", "", "", "", "", "", "", "";
281};
282
283&gpio4 {
284 gpio-line-names = "", "", "", "", "", "", "", "",
285 "", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
286 "lte_pwr#", "lte_rst", "lte_int", "",
287 "amp_gpio4", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
288 "", "uart1_term", "uart1_half", "app_gpio2",
289 "mipi_gpio1", "", "", "";
290};
291
292&gpio5 {
293 gpio-line-names = "", "", "", "mipi_gpio4",
294 "mipi_gpio3", "mipi_gpio2", "", "",
295 "", "", "", "", "", "", "", "",
296 "", "", "", "", "", "", "", "",
297 "", "", "", "", "", "", "", "";
298};
299
300&i2c1 {
301 clock-frequency = <100000>;
302 pinctrl-names = "default", "gpio";
303 pinctrl-0 = <&pinctrl_i2c1>;
304 pinctrl-1 = <&pinctrl_i2c1_gpio>;
305 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
306 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
307 status = "okay";
308
309 gsc: gsc@20 {
310 compatible = "gw,gsc";
311 reg = <0x20>;
312 pinctrl-0 = <&pinctrl_gsc>;
313 interrupt-parent = <&gpio2>;
314 interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
315 interrupt-controller;
316 #interrupt-cells = <1>;
317 #address-cells = <1>;
318 #size-cells = <0>;
319
320 adc {
321 compatible = "gw,gsc-adc";
322 #address-cells = <1>;
323 #size-cells = <0>;
324
325 channel@6 {
326 gw,mode = <0>;
327 reg = <0x06>;
328 label = "temp";
329 };
330
331 channel@8 {
332 gw,mode = <3>;
333 reg = <0x08>;
334 label = "vdd_bat";
335 };
336
337 channel@82 {
338 gw,mode = <2>;
339 reg = <0x82>;
340 label = "vin";
341 gw,voltage-divider-ohms = <22100 1000>;
342 gw,voltage-offset-microvolt = <700000>;
343 };
344
345 channel@84 {
346 gw,mode = <2>;
347 reg = <0x84>;
348 label = "vin_4p0";
349 gw,voltage-divider-ohms = <10000 10000>;
350 };
351
352 channel@86 {
353 gw,mode = <2>;
354 reg = <0x86>;
355 label = "vdd_3p3";
356 gw,voltage-divider-ohms = <10000 10000>;
357 };
358
359 channel@88 {
360 gw,mode = <2>;
361 reg = <0x88>;
362 label = "vdd_0p9";
363 };
364
365 channel@8c {
366 gw,mode = <2>;
367 reg = <0x8c>;
368 label = "vdd_soc";
369 };
370
371 channel@8e {
372 gw,mode = <2>;
373 reg = <0x8e>;
374 label = "vdd_arm";
375 };
376
377 channel@90 {
378 gw,mode = <2>;
379 reg = <0x90>;
380 label = "vdd_1p8";
381 };
382
383 channel@92 {
384 gw,mode = <2>;
385 reg = <0x92>;
386 label = "vdd_dram";
387 };
388
389 channel@98 {
390 gw,mode = <2>;
391 reg = <0x98>;
392 label = "vdd_1p0";
393 };
394
395 channel@9a {
396 gw,mode = <2>;
397 reg = <0x9a>;
398 label = "vdd_2p5";
399 gw,voltage-divider-ohms = <10000 10000>;
400 };
401
402 channel@9c {
403 gw,mode = <2>;
404 reg = <0x9c>;
405 label = "vdd_5p0";
406 gw,voltage-divider-ohms = <10000 10000>;
407 };
408
409 channel@a2 {
410 gw,mode = <2>;
411 reg = <0xa2>;
412 label = "vdd_gsc";
413 gw,voltage-divider-ohms = <10000 10000>;
414 };
415 };
416 };
417
418 gpio: gpio@23 {
419 compatible = "nxp,pca9555";
420 reg = <0x23>;
421 gpio-controller;
422 #gpio-cells = <2>;
423 interrupt-parent = <&gsc>;
424 interrupts = <4>;
425 };
426
427 pmic@4b {
428 compatible = "rohm,bd71847";
429 reg = <0x4b>;
430 pinctrl-names = "default";
431 pinctrl-0 = <&pinctrl_pmic>;
432 interrupt-parent = <&gpio3>;
433 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
434 rohm,reset-snvs-powered;
435 #clock-cells = <0>;
436 clocks = <&osc_32k>;
437 clock-output-names = "clk-32k-out";
438
439 regulators {
440 /* vdd_soc: 0.805-0.900V (typ=0.8V) */
441 BUCK1 {
442 regulator-name = "buck1";
443 regulator-min-microvolt = <700000>;
444 regulator-max-microvolt = <1300000>;
445 regulator-boot-on;
446 regulator-always-on;
447 regulator-ramp-delay = <1250>;
448 };
449
450 /* vdd_arm: 0.805-1.0V (typ=0.9V) */
451 buck2: BUCK2 {
452 regulator-name = "buck2";
453 regulator-min-microvolt = <700000>;
454 regulator-max-microvolt = <1300000>;
455 regulator-boot-on;
456 regulator-always-on;
457 regulator-ramp-delay = <1250>;
458 rohm,dvs-run-voltage = <1000000>;
459 rohm,dvs-idle-voltage = <900000>;
460 };
461
462 /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
463 BUCK3 {
464 regulator-name = "buck3";
465 regulator-min-microvolt = <700000>;
466 regulator-max-microvolt = <1350000>;
467 regulator-boot-on;
468 regulator-always-on;
469 };
470
471 /* vdd_3p3 */
472 BUCK4 {
473 regulator-name = "buck4";
474 regulator-min-microvolt = <3000000>;
475 regulator-max-microvolt = <3300000>;
476 regulator-boot-on;
477 regulator-always-on;
478 };
479
480 /* vdd_1p8 */
481 BUCK5 {
482 regulator-name = "buck5";
483 regulator-min-microvolt = <1605000>;
484 regulator-max-microvolt = <1995000>;
485 regulator-boot-on;
486 regulator-always-on;
487 };
488
489 /* vdd_dram */
490 BUCK6 {
491 regulator-name = "buck6";
492 regulator-min-microvolt = <800000>;
493 regulator-max-microvolt = <1400000>;
494 regulator-boot-on;
495 regulator-always-on;
496 };
497
498 /* nvcc_snvs_1p8 */
499 LDO1 {
500 regulator-name = "ldo1";
501 regulator-min-microvolt = <1600000>;
502 regulator-max-microvolt = <1900000>;
503 regulator-boot-on;
504 regulator-always-on;
505 };
506
507 /* vdd_snvs_0p8 */
508 LDO2 {
509 regulator-name = "ldo2";
510 regulator-min-microvolt = <800000>;
511 regulator-max-microvolt = <900000>;
512 regulator-boot-on;
513 regulator-always-on;
514 };
515
516 /* vdda_1p8 */
517 LDO3 {
518 regulator-name = "ldo3";
519 regulator-min-microvolt = <1800000>;
520 regulator-max-microvolt = <3300000>;
521 regulator-boot-on;
522 regulator-always-on;
523 };
524
525 LDO4 {
526 regulator-name = "ldo4";
527 regulator-min-microvolt = <900000>;
528 regulator-max-microvolt = <1800000>;
529 regulator-boot-on;
530 regulator-always-on;
531 };
532
533 LDO6 {
534 regulator-name = "ldo6";
535 regulator-min-microvolt = <900000>;
536 regulator-max-microvolt = <1800000>;
537 regulator-boot-on;
538 regulator-always-on;
539 };
540 };
541 };
542
543 eeprom@50 {
544 compatible = "atmel,24c02";
545 reg = <0x50>;
546 pagesize = <16>;
547 };
548
549 eeprom@51 {
550 compatible = "atmel,24c02";
551 reg = <0x51>;
552 pagesize = <16>;
553 };
554
555 eeprom@52 {
556 compatible = "atmel,24c02";
557 reg = <0x52>;
558 pagesize = <16>;
559 };
560
561 eeprom@53 {
562 compatible = "atmel,24c02";
563 reg = <0x53>;
564 pagesize = <16>;
565 };
566
567 rtc@68 {
568 compatible = "dallas,ds1672";
569 reg = <0x68>;
570 };
571};
572
573&i2c2 {
574 clock-frequency = <400000>;
575 pinctrl-names = "default", "gpio";
576 pinctrl-0 = <&pinctrl_i2c2>;
577 pinctrl-1 = <&pinctrl_i2c2_gpio>;
578 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
579 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
580 status = "okay";
581
582 accelerometer@19 {
583 compatible = "st,lis2de12";
584 pinctrl-names = "default";
585 pinctrl-0 = <&pinctrl_accel>;
586 reg = <0x19>;
587 st,drdy-int-pin = <1>;
588 interrupt-parent = <&gpio1>;
589 interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
590 };
591};
592
593/* off-board header */
594&i2c3 {
595 clock-frequency = <400000>;
596 pinctrl-names = "default", "gpio";
597 pinctrl-0 = <&pinctrl_i2c3>;
598 pinctrl-1 = <&pinctrl_i2c3_gpio>;
599 scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
600 sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
601 status = "okay";
602};
603
604/* off-board header */
605&i2c4 {
606 clock-frequency = <400000>;
607 pinctrl-names = "default", "gpio";
608 pinctrl-0 = <&pinctrl_i2c4>;
609 pinctrl-1 = <&pinctrl_i2c4_gpio>;
610 scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
611 sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
612 status = "okay";
613};
614
615&pcie_phy {
616 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
617 fsl,clkreq-unsupported;
618 clocks = <&pcie0_refclk>;
619 clock-names = "ref";
620 status = "okay";
621};
622
623&pcie0 {
624 pinctrl-names = "default";
625 pinctrl-0 = <&pinctrl_pcie0>;
626 reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
627 clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
628 <&clk IMX8MM_CLK_PCIE1_AUX>;
629 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
630 <&clk IMX8MM_CLK_PCIE1_CTRL>;
631 assigned-clock-rates = <10000000>, <250000000>;
632 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
633 <&clk IMX8MM_SYS_PLL2_250M>;
634 status = "okay";
635
636 pcie@0,0 {
637 reg = <0x0000 0 0 0 0>;
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame^]638 device_type = "pci";
639 #address-cells = <3>;
640 #size-cells = <2>;
641 ranges;
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]642
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame^]643 eth1: ethernet@0,0 {
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]644 reg = <0x0000 0 0 0 0>;
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame^]645 #address-cells = <3>;
646 #size-cells = <2>;
647 ranges;
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]648
649 local-mac-address = [00 00 00 00 00 00];
650 };
651 };
652};
653
654/* off-board header */
655&sai3 {
656 pinctrl-names = "default";
657 pinctrl-0 = <&pinctrl_sai3>;
658 assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
659 assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
660 assigned-clock-rates = <24576000>;
661 status = "okay";
662};
663
664/* RS232/RS485/RS422 selectable */
665&uart1 {
666 pinctrl-names = "default";
667 pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
668 rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
669 cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
670 status = "okay";
671};
672
673/* RS232 console */
674&uart2 {
675 pinctrl-names = "default";
676 pinctrl-0 = <&pinctrl_uart2>;
677 status = "okay";
678};
679
680/* bluetooth HCI */
681&uart3 {
682 pinctrl-names = "default";
683 pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
684 rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
685 cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
686 status = "okay";
687
688 bluetooth {
689 compatible = "brcm,bcm4330-bt";
690 shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
691 };
692};
693
694/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
695&uart4 {
696 pinctrl-names = "default";
697 pinctrl-0 = <&pinctrl_uart4>;
698 rts-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
699 cts-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
700 dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
701 dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
702 dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
703 status = "okay";
704};
705
706&usbotg1 {
707 dr_mode = "host";
708 vbus-supply = <&reg_usb1_vbus>;
709 disable-over-current;
710 status = "okay";
711};
712
713&usbotg2 {
714 dr_mode = "host";
715 disable-over-current;
716 status = "okay";
717};
718
719/* SDIO WiFi */
720&usdhc2 {
721 pinctrl-names = "default", "state_100mhz", "state_200mhz";
722 pinctrl-0 = <&pinctrl_usdhc2>;
723 pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
724 pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
725 bus-width = <4>;
726 non-removable;
727 vmmc-supply = <&reg_wifi>;
728 #address-cells = <1>;
729 #size-cells = <0>;
730 status = "okay";
731
732 wifi@0 {
733 compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
734 reg = <0>;
735 };
736};
737
738/* eMMC */
739&usdhc3 {
740 pinctrl-names = "default", "state_100mhz", "state_200mhz";
741 pinctrl-0 = <&pinctrl_usdhc3>;
742 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
743 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
744 bus-width = <8>;
745 non-removable;
746 status = "okay";
747};
748
749&wdog1 {
750 pinctrl-names = "default";
751 pinctrl-0 = <&pinctrl_wdog>;
752 fsl,ext-reset-output;
753 status = "okay";
754};
755
756&iomuxc {
757 pinctrl-names = "default";
758 pinctrl-0 = <&pinctrl_hog>;
759
760 pinctrl_hog: hoggrp {
761 fsl,pins = <
762 MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
763 MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x40000041 /* M2_PWR_EN */
764 MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */
765 MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
766 MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
767 MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000041 /* LTE_INT */
768 MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000041 /* LTE_RST# */
769 MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000041 /* LTE_PWR */
770 MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */
771 MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000041 /* AMP GPIO2 */
772 MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x40000041 /* AMP GPIO3 */
773 MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x40000041 /* AMP_GPIO4 */
774 MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */
775 MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x40000041 /* VDD_4P0_EN */
776 MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000041 /* APP GPIO2 */
777 MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000041 /* UART2_EN# */
778 MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x40000041 /* MIPI_GPIO1 */
779 MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000041 /* MIPI_GPIO2 */
780 MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000041 /* MIPI_GPIO3/PWM2 */
781 MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* MIPI_GPIO4/PWM3 */
782 >;
783 };
784
785 pinctrl_accel: accelgrp {
786 fsl,pins = <
787 MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x159
788 >;
789 };
790
791 pinctrl_fec1: fec1grp {
792 fsl,pins = <
793 MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
794 MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
795 MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
796 MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
797 MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
798 MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
799 MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
800 MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
801 MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
802 MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
803 MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
804 MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
805 MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
806 MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
807 MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* RST# */
808 MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 /* IRQ# */
809 >;
810 };
811
812 pinctrl_gsc: gscgrp {
813 fsl,pins = <
814 MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x40
815 >;
816 };
817
818 pinctrl_i2c1: i2c1grp {
819 fsl,pins = <
820 MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
821 MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
822 >;
823 };
824
825 pinctrl_i2c1_gpio: i2c1gpiogrp {
826 fsl,pins = <
827 MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c3
828 MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c3
829 >;
830 };
831
832 pinctrl_i2c2: i2c2grp {
833 fsl,pins = <
834 MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
835 MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
836 >;
837 };
838
839 pinctrl_i2c2_gpio: i2c2gpiogrp {
840 fsl,pins = <
841 MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c3
842 MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c3
843 >;
844 };
845
846 pinctrl_i2c3: i2c3grp {
847 fsl,pins = <
848 MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
849 MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
850 >;
851 };
852
853 pinctrl_i2c3_gpio: i2c3gpiogrp {
854 fsl,pins = <
855 MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c3
856 MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c3
857 >;
858 };
859
860 pinctrl_i2c4: i2c4grp {
861 fsl,pins = <
862 MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
863 MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
864 >;
865 };
866
867 pinctrl_i2c4_gpio: i2c4gpiogrp {
868 fsl,pins = <
869 MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x400001c3
870 MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x400001c3
871 >;
872 };
873
874 pinctrl_gpio_leds: gpioledgrp {
875 fsl,pins = <
876 MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
877 MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
878 MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
879 MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
880 MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
881 >;
882 };
883
884 pinctrl_pcie0: pciegrp {
885 fsl,pins = <
886 MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x41
887 >;
888 };
889
890 pinctrl_pmic: pmicgrp {
891 fsl,pins = <
892 MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41
893 >;
894 };
895
896 pinctrl_pps: ppsgrp {
897 fsl,pins = <
898 MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x141 /* PPS */
899 >;
900 };
901
902 pinctrl_reg_wl: regwlgrp {
903 fsl,pins = <
904 MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 /* WLAN_WLON */
905 >;
906 };
907
908 pinctrl_reg_usb1: regusb1grp {
909 fsl,pins = <
910 MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x41
911 >;
912 };
913
914 pinctrl_sai3: sai3grp {
915 fsl,pins = <
916 MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
917 MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
918 MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
919 MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
920 MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
921 >;
922 };
923
924 pinctrl_spi1: spi1grp {
925 fsl,pins = <
926 MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
927 MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
928 MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
929 MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40
930 MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x140 /* CAN_IRQ# */
931 >;
932 };
933
934 pinctrl_spi2: spi2grp {
935 fsl,pins = <
936 MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82
937 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82
938 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82
939 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 /* SS0 */
940 >;
941 };
942
943 pinctrl_uart1: uart1grp {
944 fsl,pins = <
945 MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
946 MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
947 MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x140 /* RTS */
948 MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x140 /* CTS */
949 >;
950 };
951
952 pinctrl_uart1_gpio: uart1gpiogrp {
953 fsl,pins = <
954 MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x40000110 /* HALF */
955 MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000110 /* TERM */
956 MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x40000110 /* RS485 */
957 >;
958 };
959
960 pinctrl_uart2: uart2grp {
961 fsl,pins = <
962 MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
963 MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
964 >;
965 };
966
967 pinctrl_uart3_gpio: uart3_gpiogrp {
968 fsl,pins = <
969 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 /* BT_EN# */
970 >;
971 };
972
973 pinctrl_uart3: uart3grp {
974 fsl,pins = <
975 MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
976 MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
977 MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */
978 MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x140 /* RTS */
979 >;
980 };
981
982 pinctrl_uart4: uart4grp {
983 fsl,pins = <
984 MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
985 MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
986 MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x140 /* CTS */
987 MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x140 /* RTS */
988 MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x140 /* DTR */
989 MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x140 /* DSR */
990 MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x140 /* DCD */
991 MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x140 /* RI */
992 MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x140 /* GNSS_PPS */
993 MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x141 /* GNSS_GASP */
994 >;
995 };
996
997 pinctrl_usdhc2: usdhc2grp {
998 fsl,pins = <
999 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
1000 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
1001 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
1002 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
1003 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
1004 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
1005 >;
1006 };
1007
1008 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
1009 fsl,pins = <
1010 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
1011 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
1012 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
1013 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
1014 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
1015 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
1016 >;
1017 };
1018
1019 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
1020 fsl,pins = <
1021 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
1022 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
1023 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
1024 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
1025 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
1026 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
1027 >;
1028 };
1029
1030 pinctrl_usdhc3: usdhc3grp {
1031 fsl,pins = <
1032 MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
1033 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
1034 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
1035 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
1036 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
1037 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
1038 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
1039 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
1040 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
1041 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
1042 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
1043 >;
1044 };
1045
1046 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
1047 fsl,pins = <
1048 MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
1049 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
1050 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
1051 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
1052 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
1053 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
1054 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
1055 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
1056 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
1057 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
1058 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
1059 >;
1060 };
1061
1062 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
1063 fsl,pins = <
1064 MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
1065 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
1066 MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
1067 MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
1068 MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
1069 MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
1070 MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
1071 MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
1072 MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
1073 MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
1074 MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
1075 >;
1076 };
1077
1078 pinctrl_wdog: wdoggrp {
1079 fsl,pins = <
1080 MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
1081 >;
1082 };
1083};