| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * Copyright 2013 Sascha Hauer, Pengutronix |
| 4 | * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com> |
| 5 | */ |
| 6 | |
| 7 | #include <dt-bindings/gpio/gpio.h> |
| 8 | |
| 9 | &fec { |
| 10 | /delete-property/ interrupts; |
| 11 | interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, |
| 12 | <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; |
| 13 | fsl,err006687-workaround-present; |
| 14 | }; |
| 15 | |
| 16 | &i2c1 { |
| 17 | pinctrl-names = "default", "gpio"; |
| 18 | pinctrl-0 = <&pinctrl_i2c1>; |
| 19 | pinctrl-1 = <&pinctrl_i2c1_recovery>; |
| 20 | scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 21 | sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 22 | clock-frequency = <100000>; |
| 23 | status = "okay"; |
| 24 | |
| 25 | pmic: pmic@8 { |
| 26 | compatible = "fsl,pfuze100"; |
| 27 | reg = <0x08>; |
| 28 | }; |
| 29 | |
| 30 | sensor@48 { |
| 31 | compatible = "national,lm75"; |
| 32 | reg = <0x48>; |
| 33 | vs-supply = <®_3p3v>; |
| 34 | }; |
| 35 | |
| 36 | eeprom@50 { |
| 37 | compatible = "st,24c64", "atmel,24c64"; |
| 38 | reg = <0x50>; |
| 39 | pagesize = <32>; |
| 40 | vcc-supply = <®_3p3v>; |
| 41 | }; |
| 42 | }; |
| 43 | |
| 44 | &iomuxc { |
| 45 | /* |
| 46 | * This pinmuxing is required for the ERR006687 workaround. Board |
| 47 | * DTS files that enable the FEC controller with |
| 48 | * fsl,err006687-workaround-present must include this group. |
| 49 | */ |
| 50 | pinctrl_enet_fix: enetfixgrp { |
| 51 | fsl,pins = < |
| 52 | /* ENET ping patch */ |
| 53 | MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 |
| 54 | >; |
| 55 | }; |
| 56 | }; |