Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright 2022 Broadcom Ltd. |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 7 | #include <dt-bindings/interrupt-controller/irq.h> |
| 8 | |
| 9 | / { |
| 10 | compatible = "brcm,bcm6756", "brcm,bcmbca"; |
| 11 | #address-cells = <1>; |
| 12 | #size-cells = <1>; |
| 13 | |
| 14 | interrupt-parent = <&gic>; |
| 15 | |
| 16 | cpus { |
| 17 | #address-cells = <1>; |
| 18 | #size-cells = <0>; |
| 19 | |
| 20 | CA7_0: cpu@0 { |
| 21 | device_type = "cpu"; |
| 22 | compatible = "arm,cortex-a7"; |
| 23 | reg = <0x0>; |
| 24 | next-level-cache = <&L2_0>; |
| 25 | enable-method = "psci"; |
| 26 | }; |
| 27 | |
| 28 | CA7_1: cpu@1 { |
| 29 | device_type = "cpu"; |
| 30 | compatible = "arm,cortex-a7"; |
| 31 | reg = <0x1>; |
| 32 | next-level-cache = <&L2_0>; |
| 33 | enable-method = "psci"; |
| 34 | }; |
| 35 | |
| 36 | CA7_2: cpu@2 { |
| 37 | device_type = "cpu"; |
| 38 | compatible = "arm,cortex-a7"; |
| 39 | reg = <0x2>; |
| 40 | next-level-cache = <&L2_0>; |
| 41 | enable-method = "psci"; |
| 42 | }; |
| 43 | |
| 44 | CA7_3: cpu@3 { |
| 45 | device_type = "cpu"; |
| 46 | compatible = "arm,cortex-a7"; |
| 47 | reg = <0x3>; |
| 48 | next-level-cache = <&L2_0>; |
| 49 | enable-method = "psci"; |
| 50 | }; |
| 51 | |
| 52 | L2_0: l2-cache0 { |
| 53 | compatible = "cache"; |
| 54 | cache-level = <2>; |
| 55 | cache-unified; |
| 56 | }; |
| 57 | }; |
| 58 | |
| 59 | timer { |
| 60 | compatible = "arm,armv7-timer"; |
| 61 | interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 62 | <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 63 | <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 64 | <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 65 | arm,cpu-registers-not-fw-configured; |
| 66 | }; |
| 67 | |
| 68 | pmu: pmu { |
| 69 | compatible = "arm,cortex-a7-pmu"; |
| 70 | interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| 71 | <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 72 | <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 73 | <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 74 | interrupt-affinity = <&CA7_0>, <&CA7_1>, |
| 75 | <&CA7_2>, <&CA7_3>; |
| 76 | }; |
| 77 | |
| 78 | clocks: clocks { |
| 79 | periph_clk: periph-clk { |
| 80 | compatible = "fixed-clock"; |
| 81 | #clock-cells = <0>; |
| 82 | clock-frequency = <200000000>; |
| 83 | }; |
| 84 | |
| 85 | uart_clk: uart-clk { |
| 86 | compatible = "fixed-factor-clock"; |
| 87 | #clock-cells = <0>; |
| 88 | clocks = <&periph_clk>; |
| 89 | clock-div = <4>; |
| 90 | clock-mult = <1>; |
| 91 | }; |
| 92 | |
| 93 | hsspi_pll: hsspi-pll { |
| 94 | compatible = "fixed-clock"; |
| 95 | #clock-cells = <0>; |
| 96 | clock-frequency = <200000000>; |
| 97 | }; |
| 98 | }; |
| 99 | |
| 100 | psci { |
| 101 | compatible = "arm,psci-0.2"; |
| 102 | method = "smc"; |
| 103 | }; |
| 104 | |
| 105 | axi@81000000 { |
| 106 | compatible = "simple-bus"; |
| 107 | #address-cells = <1>; |
| 108 | #size-cells = <1>; |
| 109 | ranges = <0 0x81000000 0x8000>; |
| 110 | |
| 111 | gic: interrupt-controller@1000 { |
| 112 | compatible = "arm,cortex-a7-gic"; |
| 113 | #interrupt-cells = <3>; |
| 114 | interrupt-controller; |
| 115 | interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 116 | reg = <0x1000 0x1000>, |
| 117 | <0x2000 0x2000>, |
| 118 | <0x4000 0x2000>, |
| 119 | <0x6000 0x2000>; |
| 120 | }; |
| 121 | }; |
| 122 | |
| 123 | bus@ff800000 { |
| 124 | compatible = "simple-bus"; |
| 125 | #address-cells = <1>; |
| 126 | #size-cells = <1>; |
| 127 | ranges = <0 0xff800000 0x800000>; |
| 128 | |
| 129 | hsspi: spi@1000 { |
| 130 | #address-cells = <1>; |
| 131 | #size-cells = <0>; |
| 132 | compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1"; |
| 133 | reg = <0x1000 0x600>, <0x2610 0x4>; |
| 134 | reg-names = "hsspi", "spim-ctrl"; |
| 135 | interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 136 | clocks = <&hsspi_pll &hsspi_pll>; |
| 137 | clock-names = "hsspi", "pll"; |
| 138 | num-cs = <8>; |
| 139 | status = "disabled"; |
| 140 | }; |
| 141 | |
| 142 | uart0: serial@12000 { |
| 143 | compatible = "arm,pl011", "arm,primecell"; |
| 144 | reg = <0x12000 0x1000>; |
| 145 | interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 146 | clocks = <&uart_clk>, <&uart_clk>; |
| 147 | clock-names = "uartclk", "apb_pclk"; |
| 148 | status = "disabled"; |
| 149 | }; |
| 150 | }; |
| 151 | }; |