Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 93743d241c64bc1f7ecbf3262d1683176551e11f / . / Bindings / pinctrl / realtek,rtd1619b-pinctrl.yaml
blob: 671e4ec8462459d3bce75e74f32712a581a4b120 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2# Copyright 2023 Realtek Semiconductor Corporation
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1619b-pinctrl.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: Realtek DHC RTD1619B Pin Controller
9
10maintainers:
11 - TY Chang <tychang@realtek.com>
12
13description:
14 The Realtek DHC RTD1619B is a high-definition media processor SoC. The
15 RTD1619B pin controller is used to control pin function, pull up/down
16 resistor, drive strength, schmitt trigger and power source.
17
18properties:
19 compatible:
20 const: realtek,rtd1619b-pinctrl
21
22 reg:
23 maxItems: 1
24
25patternProperties:
26 '-pins$':
27 type: object
28 allOf:
29 - $ref: pincfg-node.yaml#
30 - $ref: pinmux-node.yaml#
31
32 properties:
33 pins:
34 items:
35 enum: [ gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7,
36 gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, gpio_14,
37 gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, gpio_21,
38 gpio_22, gpio_23, usb_cc2, gpio_25, gpio_26, gpio_27, gpio_28,
39 gpio_29, gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35,
40 hif_data, hif_en, hif_rdy, hif_clk, gpio_40, gpio_41, gpio_42,
41 gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, gpio_48, gpio_49,
42 gpio_50, usb_cc1, gpio_52, gpio_53, ir_rx, ur0_rx, ur0_tx,
43 gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_63,
44 gpio_64, gpio_65, gpio_66, gpio_67, gpio_68, gpio_69, gpio_70,
45 gpio_71, gpio_72, gpio_73, gpio_74, gpio_75, gpio_76, emmc_cmd,
46 spi_ce_n, spi_sck, spi_so, spi_si, emmc_rst_n, emmc_dd_sb,
47 emmc_clk, emmc_data_0, emmc_data_1, emmc_data_2, emmc_data_3,
48 emmc_data_4, emmc_data_5, emmc_data_6, emmc_data_7, ur2_loc,
49 gspi_loc, sdio_loc, hi_loc, hi_width, sf_en, arm_trace_dbg_en,
50 pwm_01_open_drain_en_loc0, pwm_23_open_drain_en_loc0,
51 pwm_01_open_drain_en_loc1, pwm_23_open_drain_en_loc1,
52 ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, dmic_loc,
53 iso_gspi_loc, ejtag_ve3_loc, ejtag_aucpu0_loc, ejtag_aucpu1_loc ]
54
55 function:
56 enum: [ gpio, nf, nf_spi, spi, pmic, spdif, spdif_coaxial, spdif_optical_loc0,
57 spdif_optical_loc1, emmc_spi, emmc, sc1, uart0, uart1, uart2_loc0, uart2_loc1,
58 gspi_loc1, iso_gspi_loc1, i2c0, i2c1, i2c3, i2c4, i2c5, pwm0, pwm1, pwm2,
59 pwm3, etn_led, etn_phy, etn_clk, sc0, vfd, gspi_loc0, iso_gspi_loc0, pcie1,
60 pcie2, sd, sdio_loc0, sdio_loc1, hi, hi_m, dc_fan, pll_test_loc0, pll_test_loc1,
61 usb_cc1, usb_cc2, ir_rx, tdm_ai_loc0, tdm_ai_loc1, dmic_loc0, dmic_loc1,
62 ai_loc0, ai_loc1, tp0, tp1, ao, uart2_disable, gspi_disable, sdio_disable,
63 hi_loc_disable, hi_loc0, hi_width_disable, hi_width_1bit, vtc_i2si_loc0,
64 vtc_tdm_loc0, vtc_dmic_loc0, vtc_i2si_loc1, vtc_tdm_loc1, vtc_dmic_loc1,
65 vtc_i2so, ve3_ejtag_loc0, aucpu0_ejtag_loc0, aucpu1_ejtag_loc0, ve3_ejtag_loc1,
66 aucpu0_ejtag_loc1, aucpu1_ejtag_loc1, ve3_ejtag_loc2, aucpu0_ejtag_loc2,
67 aucpu1_ejtag_loc2, scpu_ejtag_loc0, acpu_ejtag_loc0, vcpu_ejtag_loc0,
68 scpu_ejtag_loc1, acpu_ejtag_loc1, vcpu_ejtag_loc1, scpu_ejtag_loc2,
69 acpu_ejtag_loc2, vcpu_ejtag_loc2, ve3_ejtag_disable, aucpu0_ejtag_disable,
70 aucpu1_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable,
71 scpu_ejtag_disable, iso_gspi_disable, sf_disable, sf_enable,
72 arm_trace_debug_disable, arm_trace_debug_enable, pwm_normal, pwm_open_drain,
73 standby_dbg, test_loop_dis ]
74
75 drive-strength:
76 enum: [4, 8]
77
78 bias-pull-down: true
79
80 bias-pull-up: true
81
82 bias-disable: true
83
84 input-schmitt-enable: true
85
86 input-schmitt-disable: true
87
88 drive-push-pull: true
89
90 power-source:
91 description: |
92 Valid arguments are described as below:
93 0: power supply of 1.8V
94 1: power supply of 3.3V
95 enum: [0, 1]
96
97 realtek,drive-strength-p:
98 description: |
99 Some of pins can be driven using the P-MOS and N-MOS transistor to
100 achieve finer adjustments. The block-diagram representation is as
101 follows:
102 VDD
103 |
104 ||--+
105 +-----o|| P-MOS-FET
106 | ||--+
107 IN --+ +----- out
108 | ||--+
109 +------|| N-MOS-FET
110 ||--+
111 |
112 GND
113 The driving strength of the P-MOS/N-MOS transistors impacts the
114 waveform's rise/fall times. Greater driving strength results in
115 shorter rise/fall times. Each P-MOS and N-MOS transistor offers
116 8 configurable levels (0 to 7), with higher values indicating
117 greater driving strength, contributing to achieving the desired
118 speed.
119
120 The realtek,drive-strength-p is used to control the driving strength
121 of the P-MOS output.
122 $ref: /schemas/types.yaml#/definitions/uint32
123 minimum: 0
124 maximum: 7
125
126 realtek,drive-strength-n:
127 description: |
128 Similar to the realtek,drive-strength-p, the realtek,drive-strength-n
129 is used to control the driving strength of the N-MOS output.
130 $ref: /schemas/types.yaml#/definitions/uint32
131 minimum: 0
132 maximum: 7
133
134 realtek,duty-cycle:
135 description: |
136 An integer describing the level to adjust output duty cycle, controlling
137 the proportion of positive and negative waveforms in nanoseconds.
138 Valid arguments are described as below:
139 0: 0ns
140 2: + 0.25ns
141 3: + 0.5ns
142 4: -0.25ns
143 5: -0.5ns
144 $ref: /schemas/types.yaml#/definitions/uint32
145 enum: [ 0, 2, 3, 4, 5 ]
146
147 required:
148 - pins
149
150 additionalProperties: false
151
152required:
153 - compatible
154 - reg
155
156additionalProperties: false
157
158examples:
159 - |
160 pinctrl@4e000 {
161 compatible = "realtek,rtd1619b-pinctrl";
162 reg = <0x4e000 0x130>;
163
164 emmc-hs200-pins {
165 pins = "emmc_clk",
166 "emmc_cmd",
167 "emmc_data_0",
168 "emmc_data_1",
169 "emmc_data_2",
170 "emmc_data_3",
171 "emmc_data_4",
172 "emmc_data_5",
173 "emmc_data_6",
174 "emmc_data_7";
175 function = "emmc";
176 realtek,drive-strength-p = <0x2>;
177 realtek,drive-strength-n = <0x2>;
178 };
179
180 i2c-0-pins {
181 pins = "gpio_12",
182 "gpio_13";
183 function = "i2c0";
184 drive-strength = <4>;
185 };
186 };