Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 93743d241c64bc1f7ecbf3262d1683176551e11f / . / Bindings / mfd / samsung,s2mps11.yaml
blob: 5ff6546c72b79a54723d00b6de093df2d22fca31 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC
8
9maintainers:
10 - Krzysztof Kozlowski <krzk@kernel.org>
11
12description: |
13 This is a part of device tree bindings for S2M and S5M family of Power
14 Management IC (PMIC).
15
16 The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC
17 which include voltage and current regulators, RTC, clock outputs and other
18 sub-blocks.
19
20properties:
21 compatible:
22 enum:
23 - samsung,s2mps11-pmic
24 - samsung,s2mps13-pmic
25 - samsung,s2mps14-pmic
26 - samsung,s2mps15-pmic
27 - samsung,s2mpu02-pmic
28
29 clocks:
30 $ref: ../clock/samsung,s2mps11.yaml
31 description:
32 Child node describing clock provider.
33
34 interrupts:
35 maxItems: 1
36
37 reg:
38 maxItems: 1
39
40 regulators:
41 type: object
42 description:
43 List of child nodes that specify the regulators.
44
45 samsung,s2mps11-acokb-ground:
46 description: |
47 Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so
48 the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the
49 power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes
50 low, the rising ACOKB will trigger power off.
51 type: boolean
52
53 samsung,s2mps11-wrstbi-ground:
54 description: |
55 Indicates that WRSTBI pin of PMIC is pulled down. When the system is
56 suspended it will always go down thus triggerring unwanted buck warm
57 reset (setting buck voltages to default values).
58 type: boolean
59
60 wakeup-source: true
61
62required:
63 - compatible
64 - reg
65 - regulators
66
67additionalProperties: false
68
69allOf:
70 - if:
71 properties:
72 compatible:
73 contains:
74 const: samsung,s2mps11-pmic
75 then:
76 properties:
77 regulators:
78 $ref: ../regulator/samsung,s2mps11.yaml
79 samsung,s2mps11-wrstbi-ground: false
80
81 - if:
82 properties:
83 compatible:
84 contains:
85 const: samsung,s2mps13-pmic
86 then:
87 properties:
88 regulators:
89 $ref: ../regulator/samsung,s2mps13.yaml
90 samsung,s2mps11-acokb-ground: false
91
92 - if:
93 properties:
94 compatible:
95 contains:
96 const: samsung,s2mps14-pmic
97 then:
98 properties:
99 regulators:
100 $ref: ../regulator/samsung,s2mps14.yaml
101 samsung,s2mps11-acokb-ground: false
102 samsung,s2mps11-wrstbi-ground: false
103
104 - if:
105 properties:
106 compatible:
107 contains:
108 const: samsung,s2mps15-pmic
109 then:
110 properties:
111 regulators:
112 $ref: ../regulator/samsung,s2mps15.yaml
113 samsung,s2mps11-acokb-ground: false
114 samsung,s2mps11-wrstbi-ground: false
115
116 - if:
117 properties:
118 compatible:
119 contains:
120 const: samsung,s2mpu02-pmic
121 then:
122 properties:
123 regulators:
124 $ref: ../regulator/samsung,s2mpu02.yaml
125 samsung,s2mps11-acokb-ground: false
126 samsung,s2mps11-wrstbi-ground: false
127
128examples:
129 - |
130 #include <dt-bindings/interrupt-controller/irq.h>
131
132 i2c {
133 #address-cells = <1>;
134 #size-cells = <0>;
135
136 pmic@66 {
137 compatible = "samsung,s2mps11-pmic";
138 reg = <0x66>;
139
140 interrupt-parent = <&gpx0>;
141 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
142 pinctrl-names = "default";
143 pinctrl-0 = <&s2mps11_irq>;
144 samsung,s2mps11-acokb-ground;
145 wakeup-source;
146
147 clocks {
148 compatible = "samsung,s2mps11-clk";
149 #clock-cells = <1>;
150 clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt";
151 };
152
153 regulators {
154 LDO1 {
155 regulator-name = "vdd_ldo1";
156 regulator-min-microvolt = <1000000>;
157 regulator-max-microvolt = <1000000>;
158 regulator-always-on;
159 };
160
161 LDO4 {
162 regulator-name = "vdd_adc";
163 regulator-min-microvolt = <1800000>;
164 regulator-max-microvolt = <1800000>;
165
166 regulator-state-mem {
167 regulator-off-in-suspend;
168 };
169 };
170
171 // ....
172
173 BUCK1 {
174 regulator-name = "vdd_mif";
175 regulator-min-microvolt = <800000>;
176 regulator-max-microvolt = <1300000>;
177 regulator-always-on;
178 regulator-boot-on;
179
180 regulator-state-mem {
181 regulator-off-in-suspend;
182 };
183 };
184
185 BUCK2 {
186 regulator-name = "vdd_arm";
187 regulator-min-microvolt = <800000>;
188 regulator-max-microvolt = <1500000>;
189 regulator-always-on;
190 regulator-boot-on;
191 regulator-coupled-with = <&buck3_reg>;
192 regulator-coupled-max-spread = <300000>;
193
194 regulator-state-mem {
195 regulator-off-in-suspend;
196 };
197 };
198
199 BUCK3 {
200 regulator-name = "vdd_int";
201 regulator-min-microvolt = <800000>;
202 regulator-max-microvolt = <1400000>;
203 regulator-always-on;
204 regulator-boot-on;
205 regulator-coupled-with = <&buck2_reg>;
206 regulator-coupled-max-spread = <300000>;
207
208 regulator-state-mem {
209 regulator-off-in-suspend;
210 };
211 };
212
213 // ...
214 };
215 };
216 };
217
218 - |
219 #include <dt-bindings/interrupt-controller/irq.h>
220
221 i2c {
222 #address-cells = <1>;
223 #size-cells = <0>;
224
225 pmic@66 {
226 compatible = "samsung,s2mps14-pmic";
227 reg = <0x66>;
228
229 interrupt-parent = <&gpx0>;
230 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
231 wakeup-source;
232
233 clocks {
234 compatible = "samsung,s2mps14-clk";
235 #clock-cells = <1>;
236 clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt";
237 };
238
239 regulators {
240 LDO1 {
241 regulator-name = "VLDO1_1.0V";
242 regulator-min-microvolt = <1000000>;
243 regulator-max-microvolt = <1000000>;
244 regulator-always-on;
245
246 regulator-state-mem {
247 regulator-on-in-suspend;
248 };
249 };
250
251 // ...
252
253 BUCK1 {
254 regulator-name = "VBUCK1_1.0V";
255 regulator-min-microvolt = <800000>;
256 regulator-max-microvolt = <1000000>;
257 regulator-always-on;
258
259 regulator-state-mem {
260 regulator-off-in-suspend;
261 };
262 };
263
264 // ...
265 };
266 };
267 };