| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | Device-Tree bindings for Active-semi ACT8945A MFD driver |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: "active-semi,act8945a". |
| 5 | - reg: the I2C slave address for the ACT8945A chip |
| 6 | |
| 7 | The chip exposes two subdevices: |
| 8 | - a regulators: see ../regulator/act8945a-regulator.txt |
| 9 | - a charger: see ../power/act8945a-charger.txt |
| 10 | |
| 11 | Example: |
| 12 | pmic@5b { |
| 13 | compatible = "active-semi,act8945a"; |
| 14 | reg = <0x5b>; |
| 15 | |
| 16 | active-semi,vsel-high; |
| 17 | |
| 18 | regulators { |
| 19 | vdd_1v35_reg: REG_DCDC1 { |
| 20 | regulator-name = "VDD_1V35"; |
| 21 | regulator-min-microvolt = <1350000>; |
| 22 | regulator-max-microvolt = <1350000>; |
| 23 | regulator-always-on; |
| 24 | }; |
| 25 | |
| 26 | vdd_1v2_reg: REG_DCDC2 { |
| 27 | regulator-name = "VDD_1V2"; |
| 28 | regulator-min-microvolt = <1100000>; |
| 29 | regulator-max-microvolt = <1300000>; |
| 30 | regulator-always-on; |
| 31 | }; |
| 32 | |
| 33 | vdd_3v3_reg: REG_DCDC3 { |
| 34 | regulator-name = "VDD_3V3"; |
| 35 | regulator-min-microvolt = <3300000>; |
| 36 | regulator-max-microvolt = <3300000>; |
| 37 | regulator-always-on; |
| 38 | }; |
| 39 | |
| 40 | vdd_fuse_reg: REG_LDO1 { |
| 41 | regulator-name = "VDD_FUSE"; |
| 42 | regulator-min-microvolt = <2500000>; |
| 43 | regulator-max-microvolt = <2500000>; |
| 44 | regulator-always-on; |
| 45 | }; |
| 46 | |
| 47 | vdd_3v3_lp_reg: REG_LDO2 { |
| 48 | regulator-name = "VDD_3V3_LP"; |
| 49 | regulator-min-microvolt = <3300000>; |
| 50 | regulator-max-microvolt = <3300000>; |
| 51 | regulator-always-on; |
| 52 | }; |
| 53 | |
| 54 | vdd_led_reg: REG_LDO3 { |
| 55 | regulator-name = "VDD_LED"; |
| 56 | regulator-min-microvolt = <3300000>; |
| 57 | regulator-max-microvolt = <3300000>; |
| 58 | regulator-always-on; |
| 59 | }; |
| 60 | |
| 61 | vdd_sdhc_1v8_reg: REG_LDO4 { |
| 62 | regulator-name = "VDD_SDHC_1V8"; |
| 63 | regulator-min-microvolt = <1800000>; |
| 64 | regulator-max-microvolt = <1800000>; |
| 65 | regulator-always-on; |
| 66 | }; |
| 67 | }; |
| 68 | |
| 69 | charger { |
| 70 | compatible = "active-semi,act8945a-charger"; |
| 71 | pinctrl-names = "default"; |
| 72 | pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; |
| 73 | interrupt-parent = <&pioA>; |
| 74 | interrupts = <45 IRQ_TYPE_LEVEL_LOW>; |
| 75 | |
| 76 | active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; |
| 77 | active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; |
| 78 | active-semi,input-voltage-threshold-microvolt = <6600>; |
| 79 | active-semi,precondition-timeout = <40>; |
| 80 | active-semi,total-timeout = <3>; |
| 81 | }; |
| 82 | }; |