Stefan Roese | 5ffceb8 | 2015-03-26 15:36:56 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) Marvell International Ltd. and its affiliates |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0 |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <spl.h> |
| 9 | #include <asm/io.h> |
| 10 | #include <asm/arch/cpu.h> |
| 11 | #include <asm/arch/soc.h> |
| 12 | |
| 13 | #include "ddr3_init.h" |
| 14 | |
| 15 | #define WL_ITERATION_NUM 10 |
| 16 | #define ONE_CLOCK_ERROR_SHIFT 2 |
| 17 | #define ALIGN_ERROR_SHIFT -2 |
| 18 | |
| 19 | static u32 pup_mask_table[] = { |
| 20 | 0x000000ff, |
| 21 | 0x0000ff00, |
| 22 | 0x00ff0000, |
| 23 | 0xff000000 |
| 24 | }; |
| 25 | |
| 26 | static struct write_supp_result wr_supp_res[MAX_INTERFACE_NUM][MAX_BUS_NUM]; |
| 27 | |
| 28 | static int ddr3_tip_dynamic_write_leveling_seq(u32 dev_num); |
| 29 | static int ddr3_tip_dynamic_read_leveling_seq(u32 dev_num); |
| 30 | static int ddr3_tip_dynamic_per_bit_read_leveling_seq(u32 dev_num); |
| 31 | static int ddr3_tip_wl_supp_align_err_shift(u32 dev_num, u32 if_id, u32 bus_id, |
| 32 | u32 bus_id_delta); |
| 33 | static int ddr3_tip_wl_supp_align_phase_shift(u32 dev_num, u32 if_id, |
| 34 | u32 bus_id, u32 offset, |
| 35 | u32 bus_id_delta); |
| 36 | static int ddr3_tip_xsb_compare_test(u32 dev_num, u32 if_id, u32 bus_id, |
| 37 | u32 edge_offset, u32 bus_id_delta); |
| 38 | static int ddr3_tip_wl_supp_one_clk_err_shift(u32 dev_num, u32 if_id, |
| 39 | u32 bus_id, u32 bus_id_delta); |
| 40 | |
| 41 | u32 hws_ddr3_tip_max_cs_get(void) |
| 42 | { |
| 43 | u32 c_cs; |
| 44 | static u32 max_cs; |
| 45 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 46 | |
| 47 | if (!max_cs) { |
| 48 | for (c_cs = 0; c_cs < NUM_OF_CS; c_cs++) { |
| 49 | VALIDATE_ACTIVE(tm-> |
| 50 | interface_params[0].as_bus_params[0]. |
| 51 | cs_bitmask, c_cs); |
| 52 | max_cs++; |
| 53 | } |
| 54 | } |
| 55 | |
| 56 | return max_cs; |
| 57 | } |
| 58 | |
| 59 | /***************************************************************************** |
| 60 | Dynamic read leveling |
| 61 | ******************************************************************************/ |
| 62 | int ddr3_tip_dynamic_read_leveling(u32 dev_num, u32 freq) |
| 63 | { |
| 64 | u32 data, mask; |
| 65 | u32 max_cs = hws_ddr3_tip_max_cs_get(); |
| 66 | u32 bus_num, if_id, cl_val; |
| 67 | enum hws_speed_bin speed_bin_index; |
| 68 | /* save current CS value */ |
| 69 | u32 cs_enable_reg_val[MAX_INTERFACE_NUM] = { 0 }; |
| 70 | int is_any_pup_fail = 0; |
| 71 | u32 data_read[MAX_INTERFACE_NUM + 1] = { 0 }; |
| 72 | u8 rl_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM]; |
| 73 | struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); |
| 74 | u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); |
| 75 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 76 | |
| 77 | if (rl_version == 0) { |
| 78 | /* OLD RL machine */ |
| 79 | data = 0x40; |
| 80 | data |= (1 << 20); |
| 81 | |
| 82 | /* TBD multi CS */ |
| 83 | CHECK_STATUS(ddr3_tip_if_write( |
| 84 | dev_num, ACCESS_TYPE_MULTICAST, |
| 85 | PARAM_NOT_CARE, TRAINING_REG, |
| 86 | data, 0x11ffff)); |
| 87 | CHECK_STATUS(ddr3_tip_if_write( |
| 88 | dev_num, ACCESS_TYPE_MULTICAST, |
| 89 | PARAM_NOT_CARE, |
| 90 | TRAINING_PATTERN_BASE_ADDRESS_REG, |
| 91 | 0, 0xfffffff8)); |
| 92 | CHECK_STATUS(ddr3_tip_if_write( |
| 93 | dev_num, ACCESS_TYPE_MULTICAST, |
| 94 | PARAM_NOT_CARE, TRAINING_REG, |
| 95 | (u32)(1 << 31), (u32)(1 << 31))); |
| 96 | |
| 97 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 98 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 99 | training_result[training_stage][if_id] = TEST_SUCCESS; |
| 100 | if (ddr3_tip_if_polling |
| 101 | (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, |
| 102 | (u32)(1 << 31), TRAINING_REG, |
| 103 | MAX_POLLING_ITERATIONS) != MV_OK) { |
| 104 | DEBUG_LEVELING( |
| 105 | DEBUG_LEVEL_ERROR, |
| 106 | ("RL: DDR3 poll failed(1) IF %d\n", |
| 107 | if_id)); |
| 108 | training_result[training_stage][if_id] = |
| 109 | TEST_FAILED; |
| 110 | |
| 111 | if (debug_mode == 0) |
| 112 | return MV_FAIL; |
| 113 | } |
| 114 | } |
| 115 | |
| 116 | /* read read-leveling result */ |
| 117 | CHECK_STATUS(ddr3_tip_if_read |
| 118 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 119 | TRAINING_REG, data_read, 1 << 30)); |
| 120 | /* exit read leveling mode */ |
| 121 | CHECK_STATUS(ddr3_tip_if_write |
| 122 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 123 | TRAINING_SW_2_REG, 0x8, 0x9)); |
| 124 | CHECK_STATUS(ddr3_tip_if_write |
| 125 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 126 | TRAINING_SW_1_REG, 1 << 16, 1 << 16)); |
| 127 | |
| 128 | /* disable RL machine all Trn_CS[3:0] , [16:0] */ |
| 129 | |
| 130 | CHECK_STATUS(ddr3_tip_if_write |
| 131 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 132 | TRAINING_REG, 0, 0xf1ffff)); |
| 133 | |
| 134 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 135 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 136 | if ((data_read[if_id] & (1 << 30)) == 0) { |
| 137 | DEBUG_LEVELING( |
| 138 | DEBUG_LEVEL_ERROR, |
| 139 | ("\n_read Leveling failed for IF %d\n", |
| 140 | if_id)); |
| 141 | training_result[training_stage][if_id] = |
| 142 | TEST_FAILED; |
| 143 | if (debug_mode == 0) |
| 144 | return MV_FAIL; |
| 145 | } |
| 146 | } |
| 147 | return MV_OK; |
| 148 | } |
| 149 | |
| 150 | /* NEW RL machine */ |
| 151 | for (effective_cs = 0; effective_cs < NUM_OF_CS; effective_cs++) |
| 152 | for (bus_num = 0; bus_num < MAX_BUS_NUM; bus_num++) |
| 153 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) |
| 154 | rl_values[effective_cs][bus_num][if_id] = 0; |
| 155 | |
| 156 | for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { |
| 157 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 158 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 159 | training_result[training_stage][if_id] = TEST_SUCCESS; |
| 160 | |
| 161 | /* save current cs enable reg val */ |
| 162 | CHECK_STATUS(ddr3_tip_if_read |
| 163 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 164 | CS_ENABLE_REG, cs_enable_reg_val, |
| 165 | MASK_ALL_BITS)); |
| 166 | /* enable single cs */ |
| 167 | CHECK_STATUS(ddr3_tip_if_write |
| 168 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 169 | CS_ENABLE_REG, (1 << 3), (1 << 3))); |
| 170 | } |
| 171 | |
| 172 | ddr3_tip_reset_fifo_ptr(dev_num); |
| 173 | |
| 174 | /* |
| 175 | * Phase 1: Load pattern (using ODPG) |
| 176 | * |
| 177 | * enter Read Leveling mode |
| 178 | * only 27 bits are masked |
| 179 | * assuming non multi-CS configuration |
| 180 | * write to CS = 0 for the non multi CS configuration, note |
| 181 | * that the results shall be read back to the required CS !!! |
| 182 | */ |
| 183 | |
| 184 | /* BUS count is 0 shifted 26 */ |
| 185 | CHECK_STATUS(ddr3_tip_if_write |
| 186 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 187 | ODPG_DATA_CONTROL_REG, 0x3, 0x3)); |
| 188 | CHECK_STATUS(ddr3_tip_configure_odpg |
| 189 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0, |
| 190 | pattern_table[PATTERN_RL].num_of_phases_tx, 0, |
| 191 | pattern_table[PATTERN_RL].num_of_phases_rx, 0, 0, |
| 192 | effective_cs, STRESS_NONE, DURATION_SINGLE)); |
| 193 | |
| 194 | /* load pattern to ODPG */ |
| 195 | ddr3_tip_load_pattern_to_odpg(dev_num, ACCESS_TYPE_MULTICAST, |
| 196 | PARAM_NOT_CARE, PATTERN_RL, |
| 197 | pattern_table[PATTERN_RL]. |
| 198 | start_addr); |
| 199 | |
| 200 | /* |
| 201 | * Phase 2: ODPG to Read Leveling mode |
| 202 | */ |
| 203 | |
| 204 | /* General Training Opcode register */ |
| 205 | CHECK_STATUS(ddr3_tip_if_write |
| 206 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 207 | ODPG_WRITE_READ_MODE_ENABLE_REG, 0, |
| 208 | MASK_ALL_BITS)); |
| 209 | |
| 210 | CHECK_STATUS(ddr3_tip_if_write |
| 211 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 212 | ODPG_TRAINING_CONTROL_REG, |
| 213 | (0x301b01 | effective_cs << 2), 0x3c3fef)); |
| 214 | |
| 215 | /* Object1 opcode register 0 & 1 */ |
| 216 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 217 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 218 | speed_bin_index = |
| 219 | tm->interface_params[if_id].speed_bin_index; |
| 220 | cl_val = |
| 221 | cas_latency_table[speed_bin_index].cl_val[freq]; |
| 222 | data = (cl_val << 17) | (0x3 << 25); |
| 223 | mask = (0xff << 9) | (0x1f << 17) | (0x3 << 25); |
| 224 | CHECK_STATUS(ddr3_tip_if_write |
| 225 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 226 | ODPG_OBJ1_OPCODE_REG, data, mask)); |
| 227 | } |
| 228 | |
| 229 | /* Set iteration count to max value */ |
| 230 | CHECK_STATUS(ddr3_tip_if_write |
| 231 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 232 | TRAINING_OPCODE_1_REG, 0xd00, 0xd00)); |
| 233 | |
| 234 | /* |
| 235 | * Phase 2: Mask config |
| 236 | */ |
| 237 | |
| 238 | ddr3_tip_dynamic_read_leveling_seq(dev_num); |
| 239 | |
| 240 | /* |
| 241 | * Phase 3: Read Leveling execution |
| 242 | */ |
| 243 | |
| 244 | /* temporary jira dunit=14751 */ |
| 245 | CHECK_STATUS(ddr3_tip_if_write |
| 246 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 247 | TRAINING_DBG_1_REG, 0, (u32)(1 << 31))); |
| 248 | /* configure phy reset value */ |
| 249 | CHECK_STATUS(ddr3_tip_if_write |
| 250 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 251 | TRAINING_DBG_3_REG, (0x7f << 24), |
| 252 | (u32)(0xff << 24))); |
| 253 | /* data pup rd reset enable */ |
| 254 | CHECK_STATUS(ddr3_tip_if_write |
| 255 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 256 | SDRAM_CONFIGURATION_REG, 0, (1 << 30))); |
| 257 | /* data pup rd reset disable */ |
| 258 | CHECK_STATUS(ddr3_tip_if_write |
| 259 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 260 | SDRAM_CONFIGURATION_REG, (1 << 30), (1 << 30))); |
| 261 | /* training SW override & training RL mode */ |
| 262 | CHECK_STATUS(ddr3_tip_if_write |
| 263 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 264 | TRAINING_SW_2_REG, 0x1, 0x9)); |
| 265 | /* training enable */ |
| 266 | CHECK_STATUS(ddr3_tip_if_write |
| 267 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 268 | TRAINING_REG, (1 << 24) | (1 << 20), |
| 269 | (1 << 24) | (1 << 20))); |
| 270 | CHECK_STATUS(ddr3_tip_if_write |
| 271 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 272 | TRAINING_REG, (u32)(1 << 31), (u32)(1 << 31))); |
| 273 | |
| 274 | /********* trigger training *******************/ |
| 275 | /* Trigger, poll on status and disable ODPG */ |
| 276 | CHECK_STATUS(ddr3_tip_if_write |
| 277 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 278 | ODPG_TRAINING_TRIGGER_REG, 0x1, 0x1)); |
| 279 | CHECK_STATUS(ddr3_tip_if_write |
| 280 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 281 | ODPG_TRAINING_STATUS_REG, 0x1, 0x1)); |
| 282 | |
| 283 | /* check for training done + results pass */ |
| 284 | if (ddr3_tip_if_polling |
| 285 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x2, 0x2, |
| 286 | ODPG_TRAINING_STATUS_REG, |
| 287 | MAX_POLLING_ITERATIONS) != MV_OK) { |
| 288 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 289 | ("Training Done Failed\n")); |
| 290 | return MV_FAIL; |
| 291 | } |
| 292 | |
| 293 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 294 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 295 | CHECK_STATUS(ddr3_tip_if_read |
| 296 | (dev_num, ACCESS_TYPE_UNICAST, |
| 297 | if_id, |
| 298 | ODPG_TRAINING_TRIGGER_REG, data_read, |
| 299 | 0x4)); |
| 300 | data = data_read[if_id]; |
| 301 | if (data != 0x0) { |
| 302 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 303 | ("Training Result Failed\n")); |
| 304 | } |
| 305 | } |
| 306 | |
| 307 | /*disable ODPG - Back to functional mode */ |
| 308 | CHECK_STATUS(ddr3_tip_if_write |
| 309 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 310 | ODPG_ENABLE_REG, 0x1 << ODPG_DISABLE_OFFS, |
| 311 | (0x1 << ODPG_DISABLE_OFFS))); |
| 312 | if (ddr3_tip_if_polling |
| 313 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x0, 0x1, |
| 314 | ODPG_ENABLE_REG, MAX_POLLING_ITERATIONS) != MV_OK) { |
| 315 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 316 | ("ODPG disable failed ")); |
| 317 | return MV_FAIL; |
| 318 | } |
| 319 | CHECK_STATUS(ddr3_tip_if_write |
| 320 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 321 | ODPG_DATA_CONTROL_REG, 0, MASK_ALL_BITS)); |
| 322 | |
| 323 | /* double loop on bus, pup */ |
| 324 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 325 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 326 | /* check training done */ |
| 327 | is_any_pup_fail = 0; |
| 328 | for (bus_num = 0; |
| 329 | bus_num < tm->num_of_bus_per_interface; |
| 330 | bus_num++) { |
| 331 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); |
| 332 | if (ddr3_tip_if_polling |
| 333 | (dev_num, ACCESS_TYPE_UNICAST, |
| 334 | if_id, (1 << 25), (1 << 25), |
| 335 | mask_results_pup_reg_map[bus_num], |
| 336 | MAX_POLLING_ITERATIONS) != MV_OK) { |
| 337 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 338 | ("\n_r_l: DDR3 poll failed(2) for bus %d", |
| 339 | bus_num)); |
| 340 | is_any_pup_fail = 1; |
| 341 | } else { |
| 342 | /* read result per pup */ |
| 343 | CHECK_STATUS(ddr3_tip_if_read |
| 344 | (dev_num, |
| 345 | ACCESS_TYPE_UNICAST, |
| 346 | if_id, |
| 347 | mask_results_pup_reg_map |
| 348 | [bus_num], data_read, |
| 349 | 0xff)); |
| 350 | rl_values[effective_cs][bus_num] |
| 351 | [if_id] = (u8)data_read[if_id]; |
| 352 | } |
| 353 | } |
| 354 | |
| 355 | if (is_any_pup_fail == 1) { |
| 356 | training_result[training_stage][if_id] = |
| 357 | TEST_FAILED; |
| 358 | if (debug_mode == 0) |
| 359 | return MV_FAIL; |
| 360 | } |
| 361 | } |
| 362 | |
| 363 | DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("RL exit read leveling\n")); |
| 364 | |
| 365 | /* |
| 366 | * Phase 3: Exit Read Leveling |
| 367 | */ |
| 368 | |
| 369 | CHECK_STATUS(ddr3_tip_if_write |
| 370 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 371 | TRAINING_SW_2_REG, (1 << 3), (1 << 3))); |
| 372 | CHECK_STATUS(ddr3_tip_if_write |
| 373 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 374 | TRAINING_SW_1_REG, (1 << 16), (1 << 16))); |
| 375 | /* set ODPG to functional */ |
| 376 | CHECK_STATUS(ddr3_tip_if_write |
| 377 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 378 | ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS)); |
| 379 | |
| 380 | /* |
| 381 | * Copy the result from the effective CS search to the |
| 382 | * real Functional CS |
| 383 | */ |
| 384 | /*ddr3_tip_write_cs_result(dev_num, RL_PHY_REG); */ |
| 385 | CHECK_STATUS(ddr3_tip_if_write |
| 386 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 387 | ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS)); |
| 388 | } |
| 389 | |
| 390 | for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { |
| 391 | /* double loop on bus, pup */ |
| 392 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 393 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 394 | for (bus_num = 0; |
| 395 | bus_num < tm->num_of_bus_per_interface; |
| 396 | bus_num++) { |
| 397 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); |
| 398 | /* read result per pup from arry */ |
| 399 | data = rl_values[effective_cs][bus_num][if_id]; |
| 400 | data = (data & 0x1f) | |
| 401 | (((data & 0xe0) >> 5) << 6); |
| 402 | ddr3_tip_bus_write(dev_num, |
| 403 | ACCESS_TYPE_UNICAST, |
| 404 | if_id, |
| 405 | ACCESS_TYPE_UNICAST, |
| 406 | bus_num, DDR_PHY_DATA, |
| 407 | RL_PHY_REG + |
| 408 | ((effective_cs == |
| 409 | 0) ? 0x0 : 0x4), data); |
| 410 | } |
| 411 | } |
| 412 | } |
| 413 | /* Set to 0 after each loop to avoid illegal value may be used */ |
| 414 | effective_cs = 0; |
| 415 | |
| 416 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 417 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 418 | /* restore cs enable value */ |
| 419 | CHECK_STATUS(ddr3_tip_if_write |
| 420 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 421 | CS_ENABLE_REG, cs_enable_reg_val[if_id], |
| 422 | MASK_ALL_BITS)); |
| 423 | if (odt_config != 0) { |
| 424 | CHECK_STATUS(ddr3_tip_write_additional_odt_setting |
| 425 | (dev_num, if_id)); |
| 426 | } |
| 427 | } |
| 428 | |
| 429 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 430 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 431 | if (training_result[training_stage][if_id] == TEST_FAILED) |
| 432 | return MV_FAIL; |
| 433 | } |
| 434 | |
| 435 | return MV_OK; |
| 436 | } |
| 437 | |
| 438 | /* |
| 439 | * Legacy Dynamic write leveling |
| 440 | */ |
| 441 | int ddr3_tip_legacy_dynamic_write_leveling(u32 dev_num) |
| 442 | { |
| 443 | u32 c_cs, if_id, cs_mask = 0; |
| 444 | u32 max_cs = hws_ddr3_tip_max_cs_get(); |
| 445 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 446 | |
| 447 | /* |
| 448 | * In TRAINIUNG reg (0x15b0) write 0x80000008 | cs_mask: |
| 449 | * Trn_start |
| 450 | * cs_mask = 0x1 <<20 Trn_CS0 - CS0 is included in the DDR3 training |
| 451 | * cs_mask = 0x1 <<21 Trn_CS1 - CS1 is included in the DDR3 training |
| 452 | * cs_mask = 0x1 <<22 Trn_CS2 - CS2 is included in the DDR3 training |
| 453 | * cs_mask = 0x1 <<23 Trn_CS3 - CS3 is included in the DDR3 training |
| 454 | * Trn_auto_seq = write leveling |
| 455 | */ |
| 456 | for (c_cs = 0; c_cs < max_cs; c_cs++) |
| 457 | cs_mask = cs_mask | 1 << (20 + c_cs); |
| 458 | |
| 459 | for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { |
| 460 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 461 | CHECK_STATUS(ddr3_tip_if_write |
| 462 | (dev_num, ACCESS_TYPE_MULTICAST, 0, |
| 463 | TRAINING_REG, (0x80000008 | cs_mask), |
| 464 | 0xffffffff)); |
| 465 | mdelay(20); |
| 466 | if (ddr3_tip_if_polling |
| 467 | (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, |
| 468 | (u32)0x80000000, TRAINING_REG, |
| 469 | MAX_POLLING_ITERATIONS) != MV_OK) { |
| 470 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 471 | ("polling failed for Old WL result\n")); |
| 472 | return MV_FAIL; |
| 473 | } |
| 474 | } |
| 475 | |
| 476 | return MV_OK; |
| 477 | } |
| 478 | |
| 479 | /* |
| 480 | * Legacy Dynamic read leveling |
| 481 | */ |
| 482 | int ddr3_tip_legacy_dynamic_read_leveling(u32 dev_num) |
| 483 | { |
| 484 | u32 c_cs, if_id, cs_mask = 0; |
| 485 | u32 max_cs = hws_ddr3_tip_max_cs_get(); |
| 486 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 487 | |
| 488 | /* |
| 489 | * In TRAINIUNG reg (0x15b0) write 0x80000040 | cs_mask: |
| 490 | * Trn_start |
| 491 | * cs_mask = 0x1 <<20 Trn_CS0 - CS0 is included in the DDR3 training |
| 492 | * cs_mask = 0x1 <<21 Trn_CS1 - CS1 is included in the DDR3 training |
| 493 | * cs_mask = 0x1 <<22 Trn_CS2 - CS2 is included in the DDR3 training |
| 494 | * cs_mask = 0x1 <<23 Trn_CS3 - CS3 is included in the DDR3 training |
| 495 | * Trn_auto_seq = Read Leveling using training pattern |
| 496 | */ |
| 497 | for (c_cs = 0; c_cs < max_cs; c_cs++) |
| 498 | cs_mask = cs_mask | 1 << (20 + c_cs); |
| 499 | |
| 500 | CHECK_STATUS(ddr3_tip_if_write |
| 501 | (dev_num, ACCESS_TYPE_MULTICAST, 0, TRAINING_REG, |
| 502 | (0x80000040 | cs_mask), 0xffffffff)); |
| 503 | mdelay(100); |
| 504 | |
| 505 | for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { |
| 506 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 507 | if (ddr3_tip_if_polling |
| 508 | (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, |
| 509 | (u32)0x80000000, TRAINING_REG, |
| 510 | MAX_POLLING_ITERATIONS) != MV_OK) { |
| 511 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 512 | ("polling failed for Old RL result\n")); |
| 513 | return MV_FAIL; |
| 514 | } |
| 515 | } |
| 516 | |
| 517 | return MV_OK; |
| 518 | } |
| 519 | |
| 520 | /* |
| 521 | * Dynamic per bit read leveling |
| 522 | */ |
| 523 | int ddr3_tip_dynamic_per_bit_read_leveling(u32 dev_num, u32 freq) |
| 524 | { |
| 525 | u32 data, mask; |
| 526 | u32 bus_num, if_id, cl_val, bit_num; |
| 527 | u32 curr_numb, curr_min_delay; |
| 528 | int adll_array[3] = { 0, -0xa, 0x14 }; |
| 529 | u32 phyreg3_arr[MAX_INTERFACE_NUM][MAX_BUS_NUM]; |
| 530 | enum hws_speed_bin speed_bin_index; |
| 531 | int is_any_pup_fail = 0; |
| 532 | int break_loop = 0; |
| 533 | u32 cs_enable_reg_val[MAX_INTERFACE_NUM]; /* save current CS value */ |
| 534 | u32 data_read[MAX_INTERFACE_NUM]; |
| 535 | int per_bit_rl_pup_status[MAX_INTERFACE_NUM][MAX_BUS_NUM]; |
| 536 | u32 data2_write[MAX_INTERFACE_NUM][MAX_BUS_NUM]; |
| 537 | struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); |
| 538 | u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); |
| 539 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 540 | |
| 541 | for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { |
| 542 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 543 | for (bus_num = 0; |
| 544 | bus_num <= tm->num_of_bus_per_interface; bus_num++) { |
| 545 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); |
| 546 | per_bit_rl_pup_status[if_id][bus_num] = 0; |
| 547 | data2_write[if_id][bus_num] = 0; |
| 548 | /* read current value of phy register 0x3 */ |
| 549 | CHECK_STATUS(ddr3_tip_bus_read |
| 550 | (dev_num, if_id, ACCESS_TYPE_UNICAST, |
| 551 | bus_num, DDR_PHY_DATA, |
| 552 | READ_CENTRALIZATION_PHY_REG, |
| 553 | &phyreg3_arr[if_id][bus_num])); |
| 554 | } |
| 555 | } |
| 556 | |
| 557 | /* NEW RL machine */ |
| 558 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 559 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 560 | training_result[training_stage][if_id] = TEST_SUCCESS; |
| 561 | |
| 562 | /* save current cs enable reg val */ |
| 563 | CHECK_STATUS(ddr3_tip_if_read |
| 564 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 565 | CS_ENABLE_REG, &cs_enable_reg_val[if_id], |
| 566 | MASK_ALL_BITS)); |
| 567 | /* enable single cs */ |
| 568 | CHECK_STATUS(ddr3_tip_if_write |
| 569 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 570 | CS_ENABLE_REG, (1 << 3), (1 << 3))); |
| 571 | } |
| 572 | |
| 573 | ddr3_tip_reset_fifo_ptr(dev_num); |
| 574 | for (curr_numb = 0; curr_numb < 3; curr_numb++) { |
| 575 | /* |
| 576 | * Phase 1: Load pattern (using ODPG) |
| 577 | * |
| 578 | * enter Read Leveling mode |
| 579 | * only 27 bits are masked |
| 580 | * assuming non multi-CS configuration |
| 581 | * write to CS = 0 for the non multi CS configuration, note that |
| 582 | * the results shall be read back to the required CS !!! |
| 583 | */ |
| 584 | |
| 585 | /* BUS count is 0 shifted 26 */ |
| 586 | CHECK_STATUS(ddr3_tip_if_write |
| 587 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 588 | ODPG_DATA_CONTROL_REG, 0x3, 0x3)); |
| 589 | CHECK_STATUS(ddr3_tip_configure_odpg |
| 590 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0, |
| 591 | pattern_table[PATTERN_TEST].num_of_phases_tx, 0, |
| 592 | pattern_table[PATTERN_TEST].num_of_phases_rx, 0, |
| 593 | 0, 0, STRESS_NONE, DURATION_SINGLE)); |
| 594 | |
| 595 | /* load pattern to ODPG */ |
| 596 | ddr3_tip_load_pattern_to_odpg(dev_num, ACCESS_TYPE_MULTICAST, |
| 597 | PARAM_NOT_CARE, PATTERN_TEST, |
| 598 | pattern_table[PATTERN_TEST]. |
| 599 | start_addr); |
| 600 | |
| 601 | /* |
| 602 | * Phase 2: ODPG to Read Leveling mode |
| 603 | */ |
| 604 | |
| 605 | /* General Training Opcode register */ |
| 606 | CHECK_STATUS(ddr3_tip_if_write |
| 607 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 608 | ODPG_WRITE_READ_MODE_ENABLE_REG, 0, |
| 609 | MASK_ALL_BITS)); |
| 610 | CHECK_STATUS(ddr3_tip_if_write |
| 611 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 612 | ODPG_TRAINING_CONTROL_REG, 0x301b01, 0x3c3fef)); |
| 613 | |
| 614 | /* Object1 opcode register 0 & 1 */ |
| 615 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 616 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 617 | speed_bin_index = |
| 618 | tm->interface_params[if_id].speed_bin_index; |
| 619 | cl_val = |
| 620 | cas_latency_table[speed_bin_index].cl_val[freq]; |
| 621 | data = (cl_val << 17) | (0x3 << 25); |
| 622 | mask = (0xff << 9) | (0x1f << 17) | (0x3 << 25); |
| 623 | CHECK_STATUS(ddr3_tip_if_write |
| 624 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 625 | ODPG_OBJ1_OPCODE_REG, data, mask)); |
| 626 | } |
| 627 | |
| 628 | /* Set iteration count to max value */ |
| 629 | CHECK_STATUS(ddr3_tip_if_write |
| 630 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 631 | TRAINING_OPCODE_1_REG, 0xd00, 0xd00)); |
| 632 | |
| 633 | /* |
| 634 | * Phase 2: Mask config |
| 635 | */ |
| 636 | |
| 637 | ddr3_tip_dynamic_per_bit_read_leveling_seq(dev_num); |
| 638 | |
| 639 | /* |
| 640 | * Phase 3: Read Leveling execution |
| 641 | */ |
| 642 | |
| 643 | /* temporary jira dunit=14751 */ |
| 644 | CHECK_STATUS(ddr3_tip_if_write |
| 645 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 646 | TRAINING_DBG_1_REG, 0, (u32)(1 << 31))); |
| 647 | /* configure phy reset value */ |
| 648 | CHECK_STATUS(ddr3_tip_if_write |
| 649 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 650 | TRAINING_DBG_3_REG, (0x7f << 24), |
| 651 | (u32)(0xff << 24))); |
| 652 | /* data pup rd reset enable */ |
| 653 | CHECK_STATUS(ddr3_tip_if_write |
| 654 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 655 | SDRAM_CONFIGURATION_REG, 0, (1 << 30))); |
| 656 | /* data pup rd reset disable */ |
| 657 | CHECK_STATUS(ddr3_tip_if_write |
| 658 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 659 | SDRAM_CONFIGURATION_REG, (1 << 30), (1 << 30))); |
| 660 | /* training SW override & training RL mode */ |
| 661 | CHECK_STATUS(ddr3_tip_if_write |
| 662 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 663 | TRAINING_SW_2_REG, 0x1, 0x9)); |
| 664 | /* training enable */ |
| 665 | CHECK_STATUS(ddr3_tip_if_write |
| 666 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 667 | TRAINING_REG, (1 << 24) | (1 << 20), |
| 668 | (1 << 24) | (1 << 20))); |
| 669 | CHECK_STATUS(ddr3_tip_if_write |
| 670 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 671 | TRAINING_REG, (u32)(1 << 31), (u32)(1 << 31))); |
| 672 | |
| 673 | /********* trigger training *******************/ |
| 674 | /* Trigger, poll on status and disable ODPG */ |
| 675 | CHECK_STATUS(ddr3_tip_if_write |
| 676 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 677 | ODPG_TRAINING_TRIGGER_REG, 0x1, 0x1)); |
| 678 | CHECK_STATUS(ddr3_tip_if_write |
| 679 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 680 | ODPG_TRAINING_STATUS_REG, 0x1, 0x1)); |
| 681 | |
| 682 | /*check for training done + results pass */ |
| 683 | if (ddr3_tip_if_polling |
| 684 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x2, 0x2, |
| 685 | ODPG_TRAINING_STATUS_REG, |
| 686 | MAX_POLLING_ITERATIONS) != MV_OK) { |
| 687 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 688 | ("Training Done Failed\n")); |
| 689 | return MV_FAIL; |
| 690 | } |
| 691 | |
| 692 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 693 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 694 | CHECK_STATUS(ddr3_tip_if_read |
| 695 | (dev_num, ACCESS_TYPE_UNICAST, |
| 696 | if_id, |
| 697 | ODPG_TRAINING_TRIGGER_REG, data_read, |
| 698 | 0x4)); |
| 699 | data = data_read[if_id]; |
| 700 | if (data != 0x0) { |
| 701 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 702 | ("Training Result Failed\n")); |
| 703 | } |
| 704 | } |
| 705 | |
| 706 | /*disable ODPG - Back to functional mode */ |
| 707 | CHECK_STATUS(ddr3_tip_if_write |
| 708 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 709 | ODPG_ENABLE_REG, 0x1 << ODPG_DISABLE_OFFS, |
| 710 | (0x1 << ODPG_DISABLE_OFFS))); |
| 711 | if (ddr3_tip_if_polling |
| 712 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x0, 0x1, |
| 713 | ODPG_ENABLE_REG, MAX_POLLING_ITERATIONS) != MV_OK) { |
| 714 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 715 | ("ODPG disable failed ")); |
| 716 | return MV_FAIL; |
| 717 | } |
| 718 | CHECK_STATUS(ddr3_tip_if_write |
| 719 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 720 | ODPG_DATA_CONTROL_REG, 0, MASK_ALL_BITS)); |
| 721 | |
| 722 | /* double loop on bus, pup */ |
| 723 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 724 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 725 | /* check training done */ |
| 726 | for (bus_num = 0; |
| 727 | bus_num < tm->num_of_bus_per_interface; |
| 728 | bus_num++) { |
| 729 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); |
| 730 | |
| 731 | if (per_bit_rl_pup_status[if_id][bus_num] |
| 732 | == 0) { |
| 733 | curr_min_delay = 0; |
| 734 | for (bit_num = 0; bit_num < 8; |
| 735 | bit_num++) { |
| 736 | if (ddr3_tip_if_polling |
| 737 | (dev_num, |
| 738 | ACCESS_TYPE_UNICAST, |
| 739 | if_id, (1 << 25), |
| 740 | (1 << 25), |
| 741 | mask_results_dq_reg_map |
| 742 | [bus_num * 8 + bit_num], |
| 743 | MAX_POLLING_ITERATIONS) != |
| 744 | MV_OK) { |
| 745 | DEBUG_LEVELING |
| 746 | (DEBUG_LEVEL_ERROR, |
| 747 | ("\n_r_l: DDR3 poll failed(2) for bus %d bit %d\n", |
| 748 | bus_num, |
| 749 | bit_num)); |
| 750 | } else { |
| 751 | /* read result per pup */ |
| 752 | CHECK_STATUS |
| 753 | (ddr3_tip_if_read |
| 754 | (dev_num, |
| 755 | ACCESS_TYPE_UNICAST, |
| 756 | if_id, |
| 757 | mask_results_dq_reg_map |
| 758 | [bus_num * 8 + |
| 759 | bit_num], |
| 760 | data_read, |
| 761 | MASK_ALL_BITS)); |
| 762 | data = |
| 763 | (data_read |
| 764 | [if_id] & |
| 765 | 0x1f) | |
| 766 | ((data_read |
| 767 | [if_id] & |
| 768 | 0xe0) << 1); |
| 769 | if (curr_min_delay == 0) |
| 770 | curr_min_delay = |
| 771 | data; |
| 772 | else if (data < |
| 773 | curr_min_delay) |
| 774 | curr_min_delay = |
| 775 | data; |
| 776 | if (data > data2_write[if_id][bus_num]) |
| 777 | data2_write |
| 778 | [if_id] |
| 779 | [bus_num] = |
| 780 | data; |
| 781 | } |
| 782 | } |
| 783 | |
| 784 | if (data2_write[if_id][bus_num] <= |
| 785 | (curr_min_delay + |
| 786 | MAX_DQ_READ_LEVELING_DELAY)) { |
| 787 | per_bit_rl_pup_status[if_id] |
| 788 | [bus_num] = 1; |
| 789 | } |
| 790 | } |
| 791 | } |
| 792 | } |
| 793 | |
| 794 | /* check if there is need to search new phyreg3 value */ |
| 795 | if (curr_numb < 2) { |
| 796 | /* if there is DLL that is not checked yet */ |
| 797 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; |
| 798 | if_id++) { |
| 799 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 800 | for (bus_num = 0; |
| 801 | bus_num < tm->num_of_bus_per_interface; |
| 802 | bus_num++) { |
| 803 | VALIDATE_ACTIVE(tm->bus_act_mask, |
| 804 | bus_num); |
| 805 | if (per_bit_rl_pup_status[if_id] |
| 806 | [bus_num] != 1) { |
| 807 | /* go to next ADLL value */ |
| 808 | CHECK_STATUS |
| 809 | (ddr3_tip_bus_write |
| 810 | (dev_num, |
| 811 | ACCESS_TYPE_UNICAST, |
| 812 | if_id, |
| 813 | ACCESS_TYPE_UNICAST, |
| 814 | bus_num, DDR_PHY_DATA, |
| 815 | READ_CENTRALIZATION_PHY_REG, |
| 816 | (phyreg3_arr[if_id] |
| 817 | [bus_num] + |
| 818 | adll_array[curr_numb]))); |
| 819 | break_loop = 1; |
| 820 | break; |
| 821 | } |
| 822 | } |
| 823 | if (break_loop) |
| 824 | break; |
| 825 | } |
| 826 | } /* if (curr_numb < 2) */ |
| 827 | if (!break_loop) |
| 828 | break; |
| 829 | } /* for ( curr_numb = 0; curr_numb <3; curr_numb++) */ |
| 830 | |
| 831 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 832 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 833 | for (bus_num = 0; bus_num < tm->num_of_bus_per_interface; |
| 834 | bus_num++) { |
| 835 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_num); |
| 836 | if (per_bit_rl_pup_status[if_id][bus_num] == 1) |
| 837 | ddr3_tip_bus_write(dev_num, |
| 838 | ACCESS_TYPE_UNICAST, |
| 839 | if_id, |
| 840 | ACCESS_TYPE_UNICAST, |
| 841 | bus_num, DDR_PHY_DATA, |
| 842 | RL_PHY_REG + |
| 843 | CS_REG_VALUE(effective_cs), |
| 844 | data2_write[if_id] |
| 845 | [bus_num]); |
| 846 | else |
| 847 | is_any_pup_fail = 1; |
| 848 | } |
| 849 | |
| 850 | /* TBD flow does not support multi CS */ |
| 851 | /* |
| 852 | * cs_bitmask = tm->interface_params[if_id]. |
| 853 | * as_bus_params[bus_num].cs_bitmask; |
| 854 | */ |
| 855 | /* divide by 4 is used for retrieving the CS number */ |
| 856 | /* |
| 857 | * TBD BC2 - what is the PHY address for other |
| 858 | * CS ddr3_tip_write_cs_result() ??? |
| 859 | */ |
| 860 | /* |
| 861 | * find what should be written to PHY |
| 862 | * - max delay that is less than threshold |
| 863 | */ |
| 864 | if (is_any_pup_fail == 1) { |
| 865 | training_result[training_stage][if_id] = TEST_FAILED; |
| 866 | if (debug_mode == 0) |
| 867 | return MV_FAIL; |
| 868 | } |
| 869 | } |
| 870 | DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("RL exit read leveling\n")); |
| 871 | |
| 872 | /* |
| 873 | * Phase 3: Exit Read Leveling |
| 874 | */ |
| 875 | |
| 876 | CHECK_STATUS(ddr3_tip_if_write |
| 877 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 878 | TRAINING_SW_2_REG, (1 << 3), (1 << 3))); |
| 879 | CHECK_STATUS(ddr3_tip_if_write |
| 880 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 881 | TRAINING_SW_1_REG, (1 << 16), (1 << 16))); |
| 882 | /* set ODPG to functional */ |
| 883 | CHECK_STATUS(ddr3_tip_if_write |
| 884 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 885 | ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS)); |
| 886 | /* |
| 887 | * Copy the result from the effective CS search to the real |
| 888 | * Functional CS |
| 889 | */ |
| 890 | ddr3_tip_write_cs_result(dev_num, RL_PHY_REG); |
| 891 | CHECK_STATUS(ddr3_tip_if_write |
| 892 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 893 | ODPG_DATA_CONTROL_REG, 0x0, MASK_ALL_BITS)); |
| 894 | |
| 895 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 896 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 897 | /* restore cs enable value */ |
| 898 | CHECK_STATUS(ddr3_tip_if_write |
| 899 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 900 | CS_ENABLE_REG, cs_enable_reg_val[if_id], |
| 901 | MASK_ALL_BITS)); |
| 902 | if (odt_config != 0) { |
| 903 | CHECK_STATUS(ddr3_tip_write_additional_odt_setting |
| 904 | (dev_num, if_id)); |
| 905 | } |
| 906 | } |
| 907 | |
| 908 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 909 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 910 | if (training_result[training_stage][if_id] == TEST_FAILED) |
| 911 | return MV_FAIL; |
| 912 | } |
| 913 | |
| 914 | return MV_OK; |
| 915 | } |
| 916 | |
| 917 | int ddr3_tip_calc_cs_mask(u32 dev_num, u32 if_id, u32 effective_cs, |
| 918 | u32 *cs_mask) |
| 919 | { |
| 920 | u32 all_bus_cs = 0, same_bus_cs; |
| 921 | u32 bus_cnt; |
| 922 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 923 | |
| 924 | *cs_mask = same_bus_cs = CS_BIT_MASK; |
| 925 | |
| 926 | /* |
| 927 | * In some of the devices (such as BC2), the CS is per pup and there |
| 928 | * for mixed mode is valid on like other devices where CS configuration |
| 929 | * is per interface. |
| 930 | * In order to know that, we do 'Or' and 'And' operation between all |
| 931 | * CS (of the pups). |
| 932 | * If they are they are not the same then it's mixed mode so all CS |
| 933 | * should be configured (when configuring the MRS) |
| 934 | */ |
| 935 | for (bus_cnt = 0; bus_cnt < tm->num_of_bus_per_interface; bus_cnt++) { |
| 936 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); |
| 937 | |
| 938 | all_bus_cs |= tm->interface_params[if_id]. |
| 939 | as_bus_params[bus_cnt].cs_bitmask; |
| 940 | same_bus_cs &= tm->interface_params[if_id]. |
| 941 | as_bus_params[bus_cnt].cs_bitmask; |
| 942 | |
| 943 | /* cs enable is active low */ |
| 944 | *cs_mask &= ~tm->interface_params[if_id]. |
| 945 | as_bus_params[bus_cnt].cs_bitmask; |
| 946 | } |
| 947 | |
| 948 | if (all_bus_cs == same_bus_cs) |
| 949 | *cs_mask = (*cs_mask | (~(1 << effective_cs))) & CS_BIT_MASK; |
| 950 | |
| 951 | return MV_OK; |
| 952 | } |
| 953 | |
| 954 | /* |
| 955 | * Dynamic write leveling |
| 956 | */ |
| 957 | int ddr3_tip_dynamic_write_leveling(u32 dev_num) |
| 958 | { |
| 959 | u32 reg_data = 0, iter, if_id, bus_cnt; |
| 960 | u32 cs_enable_reg_val[MAX_INTERFACE_NUM] = { 0 }; |
| 961 | u32 cs_mask[MAX_INTERFACE_NUM]; |
| 962 | u32 read_data_sample_delay_vals[MAX_INTERFACE_NUM] = { 0 }; |
| 963 | u32 read_data_ready_delay_vals[MAX_INTERFACE_NUM] = { 0 }; |
| 964 | /* 0 for failure */ |
| 965 | u32 res_values[MAX_INTERFACE_NUM * MAX_BUS_NUM] = { 0 }; |
| 966 | u32 test_res = 0; /* 0 - success for all pup */ |
| 967 | u32 data_read[MAX_INTERFACE_NUM]; |
| 968 | u8 wl_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM]; |
| 969 | u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); |
| 970 | u32 cs_mask0[MAX_INTERFACE_NUM] = { 0 }; |
| 971 | u32 max_cs = hws_ddr3_tip_max_cs_get(); |
| 972 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 973 | |
| 974 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 975 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 976 | |
| 977 | training_result[training_stage][if_id] = TEST_SUCCESS; |
| 978 | |
| 979 | /* save Read Data Sample Delay */ |
| 980 | CHECK_STATUS(ddr3_tip_if_read |
| 981 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 982 | READ_DATA_SAMPLE_DELAY, |
| 983 | read_data_sample_delay_vals, MASK_ALL_BITS)); |
| 984 | /* save Read Data Ready Delay */ |
| 985 | CHECK_STATUS(ddr3_tip_if_read |
| 986 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 987 | READ_DATA_READY_DELAY, read_data_ready_delay_vals, |
| 988 | MASK_ALL_BITS)); |
| 989 | /* save current cs reg val */ |
| 990 | CHECK_STATUS(ddr3_tip_if_read |
| 991 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 992 | CS_ENABLE_REG, cs_enable_reg_val, MASK_ALL_BITS)); |
| 993 | } |
| 994 | |
| 995 | /* |
| 996 | * Phase 1: DRAM 2 Write Leveling mode |
| 997 | */ |
| 998 | |
| 999 | /*Assert 10 refresh commands to DRAM to all CS */ |
| 1000 | for (iter = 0; iter < WL_ITERATION_NUM; iter++) { |
| 1001 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1002 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1003 | CHECK_STATUS(ddr3_tip_if_write |
| 1004 | (dev_num, ACCESS_TYPE_UNICAST, |
| 1005 | if_id, SDRAM_OPERATION_REG, |
| 1006 | (u32)((~(0xf) << 8) | 0x2), 0xf1f)); |
| 1007 | } |
| 1008 | } |
| 1009 | /* check controller back to normal */ |
| 1010 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1011 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1012 | if (ddr3_tip_if_polling |
| 1013 | (dev_num, ACCESS_TYPE_UNICAST, if_id, 0, 0x1f, |
| 1014 | SDRAM_OPERATION_REG, MAX_POLLING_ITERATIONS) != MV_OK) { |
| 1015 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 1016 | ("WL: DDR3 poll failed(3)")); |
| 1017 | } |
| 1018 | } |
| 1019 | |
| 1020 | for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { |
| 1021 | /*enable write leveling to all cs - Q off , WL n */ |
| 1022 | /* calculate interface cs mask */ |
| 1023 | CHECK_STATUS(ddr3_tip_write_mrs_cmd(dev_num, cs_mask0, MRS1_CMD, |
| 1024 | 0x1000, 0x1080)); |
| 1025 | |
| 1026 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1027 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1028 | /* cs enable is active low */ |
| 1029 | ddr3_tip_calc_cs_mask(dev_num, if_id, effective_cs, |
| 1030 | &cs_mask[if_id]); |
| 1031 | } |
| 1032 | |
| 1033 | /* Enable Output buffer to relevant CS - Q on , WL on */ |
| 1034 | CHECK_STATUS(ddr3_tip_write_mrs_cmd |
| 1035 | (dev_num, cs_mask, MRS1_CMD, 0x80, 0x1080)); |
| 1036 | |
| 1037 | /*enable odt for relevant CS */ |
| 1038 | CHECK_STATUS(ddr3_tip_if_write |
| 1039 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1040 | 0x1498, (0x3 << (effective_cs * 2)), 0xf)); |
| 1041 | |
| 1042 | /* |
| 1043 | * Phase 2: Set training IP to write leveling mode |
| 1044 | */ |
| 1045 | |
| 1046 | CHECK_STATUS(ddr3_tip_dynamic_write_leveling_seq(dev_num)); |
| 1047 | |
| 1048 | /* |
| 1049 | * Phase 3: Trigger training |
| 1050 | */ |
| 1051 | |
| 1052 | CHECK_STATUS(ddr3_tip_if_write |
| 1053 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1054 | ODPG_TRAINING_TRIGGER_REG, 0x1, 0x1)); |
| 1055 | |
| 1056 | for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { |
| 1057 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1058 | |
| 1059 | /* training done */ |
| 1060 | if (ddr3_tip_if_polling |
| 1061 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 1062 | (1 << 1), (1 << 1), ODPG_TRAINING_STATUS_REG, |
| 1063 | MAX_POLLING_ITERATIONS) != MV_OK) { |
| 1064 | DEBUG_LEVELING( |
| 1065 | DEBUG_LEVEL_ERROR, |
| 1066 | ("WL: DDR3 poll (4) failed (Data: 0x%x)\n", |
| 1067 | reg_data)); |
| 1068 | } |
| 1069 | #if !defined(CONFIG_ARMADA_38X) /*Disabled. JIRA #1498 */ |
| 1070 | else { |
| 1071 | CHECK_STATUS(ddr3_tip_if_read |
| 1072 | (dev_num, ACCESS_TYPE_UNICAST, |
| 1073 | if_id, |
| 1074 | ODPG_TRAINING_TRIGGER_REG, |
| 1075 | ®_data, (1 << 2))); |
| 1076 | if (reg_data != 0) { |
| 1077 | DEBUG_LEVELING( |
| 1078 | DEBUG_LEVEL_ERROR, |
| 1079 | ("WL: WL failed IF %d reg_data=0x%x\n", |
| 1080 | if_id, reg_data)); |
| 1081 | } |
| 1082 | } |
| 1083 | #endif |
| 1084 | } |
| 1085 | |
| 1086 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1087 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1088 | /* training done */ |
| 1089 | if (ddr3_tip_if_polling |
| 1090 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 1091 | (1 << 1), (1 << 1), ODPG_TRAINING_STATUS_REG, |
| 1092 | MAX_POLLING_ITERATIONS) != MV_OK) { |
| 1093 | DEBUG_LEVELING( |
| 1094 | DEBUG_LEVEL_ERROR, |
| 1095 | ("WL: DDR3 poll (4) failed (Data: 0x%x)\n", |
| 1096 | reg_data)); |
| 1097 | } else { |
| 1098 | #if !defined(CONFIG_ARMADA_38X) /*Disabled. JIRA #1498 */ |
| 1099 | CHECK_STATUS(ddr3_tip_if_read |
| 1100 | (dev_num, ACCESS_TYPE_UNICAST, |
| 1101 | if_id, |
| 1102 | ODPG_TRAINING_STATUS_REG, |
| 1103 | data_read, (1 << 2))); |
| 1104 | reg_data = data_read[if_id]; |
| 1105 | if (reg_data != 0) { |
| 1106 | DEBUG_LEVELING( |
| 1107 | DEBUG_LEVEL_ERROR, |
| 1108 | ("WL: WL failed IF %d reg_data=0x%x\n", |
| 1109 | if_id, reg_data)); |
| 1110 | } |
| 1111 | #endif |
| 1112 | |
| 1113 | /* check for training completion per bus */ |
| 1114 | for (bus_cnt = 0; |
| 1115 | bus_cnt < tm->num_of_bus_per_interface; |
| 1116 | bus_cnt++) { |
| 1117 | VALIDATE_ACTIVE(tm->bus_act_mask, |
| 1118 | bus_cnt); |
| 1119 | /* training status */ |
| 1120 | CHECK_STATUS(ddr3_tip_if_read |
| 1121 | (dev_num, |
| 1122 | ACCESS_TYPE_UNICAST, |
| 1123 | if_id, |
| 1124 | mask_results_pup_reg_map |
| 1125 | [bus_cnt], data_read, |
| 1126 | (1 << 25))); |
| 1127 | reg_data = data_read[if_id]; |
| 1128 | DEBUG_LEVELING( |
| 1129 | DEBUG_LEVEL_TRACE, |
| 1130 | ("WL: IF %d BUS %d reg 0x%x\n", |
| 1131 | if_id, bus_cnt, reg_data)); |
| 1132 | if (reg_data == 0) { |
| 1133 | res_values[ |
| 1134 | (if_id * |
| 1135 | tm->num_of_bus_per_interface) |
| 1136 | + bus_cnt] = 1; |
| 1137 | } |
| 1138 | CHECK_STATUS(ddr3_tip_if_read |
| 1139 | (dev_num, |
| 1140 | ACCESS_TYPE_UNICAST, |
| 1141 | if_id, |
| 1142 | mask_results_pup_reg_map |
| 1143 | [bus_cnt], data_read, |
| 1144 | 0xff)); |
| 1145 | /* |
| 1146 | * Save the read value that should be |
| 1147 | * write to PHY register |
| 1148 | */ |
| 1149 | wl_values[effective_cs] |
| 1150 | [bus_cnt][if_id] = |
| 1151 | (u8)data_read[if_id]; |
| 1152 | } |
| 1153 | } |
| 1154 | } |
| 1155 | |
| 1156 | /* |
| 1157 | * Phase 4: Exit write leveling mode |
| 1158 | */ |
| 1159 | |
| 1160 | /* disable DQs toggling */ |
| 1161 | CHECK_STATUS(ddr3_tip_if_write |
| 1162 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1163 | WR_LEVELING_DQS_PATTERN_REG, 0x0, 0x1)); |
| 1164 | |
| 1165 | /* Update MRS 1 (WL off) */ |
| 1166 | CHECK_STATUS(ddr3_tip_write_mrs_cmd(dev_num, cs_mask0, MRS1_CMD, |
| 1167 | 0x1000, 0x1080)); |
| 1168 | |
| 1169 | /* Update MRS 1 (return to functional mode - Q on , WL off) */ |
| 1170 | CHECK_STATUS(ddr3_tip_write_mrs_cmd |
| 1171 | (dev_num, cs_mask0, MRS1_CMD, 0x0, 0x1080)); |
| 1172 | |
| 1173 | /* set phy to normal mode */ |
| 1174 | CHECK_STATUS(ddr3_tip_if_write |
| 1175 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1176 | TRAINING_SW_2_REG, 0x5, 0x7)); |
| 1177 | |
| 1178 | /* exit sw override mode */ |
| 1179 | CHECK_STATUS(ddr3_tip_if_write |
| 1180 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1181 | TRAINING_SW_2_REG, 0x4, 0x7)); |
| 1182 | } |
| 1183 | |
| 1184 | /* |
| 1185 | * Phase 5: Load WL values to each PHY |
| 1186 | */ |
| 1187 | |
| 1188 | for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { |
| 1189 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1190 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1191 | test_res = 0; |
| 1192 | for (bus_cnt = 0; |
| 1193 | bus_cnt < tm->num_of_bus_per_interface; |
| 1194 | bus_cnt++) { |
| 1195 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_cnt); |
| 1196 | /* check if result == pass */ |
| 1197 | if (res_values |
| 1198 | [(if_id * |
| 1199 | tm->num_of_bus_per_interface) + |
| 1200 | bus_cnt] == 0) { |
| 1201 | /* |
| 1202 | * read result control register |
| 1203 | * according to pup |
| 1204 | */ |
| 1205 | reg_data = |
| 1206 | wl_values[effective_cs][bus_cnt] |
| 1207 | [if_id]; |
| 1208 | /* |
| 1209 | * Write into write leveling register |
| 1210 | * ([4:0] ADLL, [8:6] Phase, [15:10] |
| 1211 | * (centralization) ADLL + 0x10) |
| 1212 | */ |
| 1213 | reg_data = |
| 1214 | (reg_data & 0x1f) | |
| 1215 | (((reg_data & 0xe0) >> 5) << 6) | |
| 1216 | (((reg_data & 0x1f) + |
| 1217 | phy_reg1_val) << 10); |
| 1218 | ddr3_tip_bus_write( |
| 1219 | dev_num, |
| 1220 | ACCESS_TYPE_UNICAST, |
| 1221 | if_id, |
| 1222 | ACCESS_TYPE_UNICAST, |
| 1223 | bus_cnt, |
| 1224 | DDR_PHY_DATA, |
| 1225 | WL_PHY_REG + |
| 1226 | effective_cs * |
| 1227 | CS_REGISTER_ADDR_OFFSET, |
| 1228 | reg_data); |
| 1229 | } else { |
| 1230 | test_res = 1; |
| 1231 | /* |
| 1232 | * read result control register |
| 1233 | * according to pup |
| 1234 | */ |
| 1235 | CHECK_STATUS(ddr3_tip_if_read |
| 1236 | (dev_num, |
| 1237 | ACCESS_TYPE_UNICAST, |
| 1238 | if_id, |
| 1239 | mask_results_pup_reg_map |
| 1240 | [bus_cnt], data_read, |
| 1241 | 0xff)); |
| 1242 | reg_data = data_read[if_id]; |
| 1243 | DEBUG_LEVELING( |
| 1244 | DEBUG_LEVEL_ERROR, |
| 1245 | ("WL: IF %d BUS %d failed, reg 0x%x\n", |
| 1246 | if_id, bus_cnt, reg_data)); |
| 1247 | } |
| 1248 | } |
| 1249 | |
| 1250 | if (test_res != 0) { |
| 1251 | training_result[training_stage][if_id] = |
| 1252 | TEST_FAILED; |
| 1253 | } |
| 1254 | } |
| 1255 | } |
| 1256 | /* Set to 0 after each loop to avoid illegal value may be used */ |
| 1257 | effective_cs = 0; |
| 1258 | |
| 1259 | /* |
| 1260 | * Copy the result from the effective CS search to the real |
| 1261 | * Functional CS |
| 1262 | */ |
| 1263 | /* ddr3_tip_write_cs_result(dev_num, WL_PHY_REG); */ |
| 1264 | /* restore saved values */ |
| 1265 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1266 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1267 | /* restore Read Data Sample Delay */ |
| 1268 | CHECK_STATUS(ddr3_tip_if_write |
| 1269 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 1270 | READ_DATA_SAMPLE_DELAY, |
| 1271 | read_data_sample_delay_vals[if_id], |
| 1272 | MASK_ALL_BITS)); |
| 1273 | |
| 1274 | /* restore Read Data Ready Delay */ |
| 1275 | CHECK_STATUS(ddr3_tip_if_write |
| 1276 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 1277 | READ_DATA_READY_DELAY, |
| 1278 | read_data_ready_delay_vals[if_id], |
| 1279 | MASK_ALL_BITS)); |
| 1280 | |
| 1281 | /* enable multi cs */ |
| 1282 | CHECK_STATUS(ddr3_tip_if_write |
| 1283 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 1284 | CS_ENABLE_REG, cs_enable_reg_val[if_id], |
| 1285 | MASK_ALL_BITS)); |
| 1286 | } |
| 1287 | |
| 1288 | /* Disable modt0 for CS0 training - need to adjust for multy CS */ |
| 1289 | CHECK_STATUS(ddr3_tip_if_write |
| 1290 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, 0x1498, |
| 1291 | 0x0, 0xf)); |
| 1292 | |
| 1293 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1294 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1295 | if (training_result[training_stage][if_id] == TEST_FAILED) |
| 1296 | return MV_FAIL; |
| 1297 | } |
| 1298 | |
| 1299 | return MV_OK; |
| 1300 | } |
| 1301 | |
| 1302 | /* |
| 1303 | * Dynamic write leveling supplementary |
| 1304 | */ |
| 1305 | int ddr3_tip_dynamic_write_leveling_supp(u32 dev_num) |
| 1306 | { |
| 1307 | int adll_offset; |
| 1308 | u32 if_id, bus_id, data, data_tmp; |
| 1309 | int is_if_fail = 0; |
| 1310 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 1311 | |
| 1312 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1313 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1314 | is_if_fail = 0; |
| 1315 | |
| 1316 | for (bus_id = 0; bus_id < GET_TOPOLOGY_NUM_OF_BUSES(); |
| 1317 | bus_id++) { |
| 1318 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); |
| 1319 | wr_supp_res[if_id][bus_id].is_pup_fail = 1; |
| 1320 | CHECK_STATUS(ddr3_tip_bus_read |
| 1321 | (dev_num, if_id, ACCESS_TYPE_UNICAST, |
| 1322 | bus_id, DDR_PHY_DATA, |
| 1323 | WRITE_CENTRALIZATION_PHY_REG + |
| 1324 | effective_cs * CS_REGISTER_ADDR_OFFSET, |
| 1325 | &data)); |
| 1326 | DEBUG_LEVELING( |
| 1327 | DEBUG_LEVEL_TRACE, |
| 1328 | ("WL Supp: adll_offset=0 data delay = %d\n", |
| 1329 | data)); |
| 1330 | if (ddr3_tip_wl_supp_align_phase_shift |
| 1331 | (dev_num, if_id, bus_id, 0, 0) == MV_OK) { |
| 1332 | DEBUG_LEVELING( |
| 1333 | DEBUG_LEVEL_TRACE, |
| 1334 | ("WL Supp: IF %d bus_id %d adll_offset=0 Success !\n", |
| 1335 | if_id, bus_id)); |
| 1336 | continue; |
| 1337 | } |
| 1338 | |
| 1339 | /* change adll */ |
| 1340 | adll_offset = 5; |
| 1341 | CHECK_STATUS(ddr3_tip_bus_write |
| 1342 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 1343 | ACCESS_TYPE_UNICAST, bus_id, DDR_PHY_DATA, |
| 1344 | WRITE_CENTRALIZATION_PHY_REG + |
| 1345 | effective_cs * CS_REGISTER_ADDR_OFFSET, |
| 1346 | data + adll_offset)); |
| 1347 | CHECK_STATUS(ddr3_tip_bus_read |
| 1348 | (dev_num, if_id, ACCESS_TYPE_UNICAST, |
| 1349 | bus_id, DDR_PHY_DATA, |
| 1350 | WRITE_CENTRALIZATION_PHY_REG + |
| 1351 | effective_cs * CS_REGISTER_ADDR_OFFSET, |
| 1352 | &data_tmp)); |
| 1353 | DEBUG_LEVELING( |
| 1354 | DEBUG_LEVEL_TRACE, |
| 1355 | ("WL Supp: adll_offset= %d data delay = %d\n", |
| 1356 | adll_offset, data_tmp)); |
| 1357 | |
| 1358 | if (ddr3_tip_wl_supp_align_phase_shift |
| 1359 | (dev_num, if_id, bus_id, adll_offset, 0) == MV_OK) { |
| 1360 | DEBUG_LEVELING( |
| 1361 | DEBUG_LEVEL_TRACE, |
| 1362 | ("WL Supp: IF %d bus_id %d adll_offset= %d Success !\n", |
| 1363 | if_id, bus_id, adll_offset)); |
| 1364 | continue; |
| 1365 | } |
| 1366 | |
| 1367 | /* change adll */ |
| 1368 | adll_offset = -5; |
| 1369 | CHECK_STATUS(ddr3_tip_bus_write |
| 1370 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 1371 | ACCESS_TYPE_UNICAST, bus_id, DDR_PHY_DATA, |
| 1372 | WRITE_CENTRALIZATION_PHY_REG + |
| 1373 | effective_cs * CS_REGISTER_ADDR_OFFSET, |
| 1374 | data + adll_offset)); |
| 1375 | CHECK_STATUS(ddr3_tip_bus_read |
| 1376 | (dev_num, if_id, ACCESS_TYPE_UNICAST, |
| 1377 | bus_id, DDR_PHY_DATA, |
| 1378 | WRITE_CENTRALIZATION_PHY_REG + |
| 1379 | effective_cs * CS_REGISTER_ADDR_OFFSET, |
| 1380 | &data_tmp)); |
| 1381 | DEBUG_LEVELING( |
| 1382 | DEBUG_LEVEL_TRACE, |
| 1383 | ("WL Supp: adll_offset= %d data delay = %d\n", |
| 1384 | adll_offset, data_tmp)); |
| 1385 | if (ddr3_tip_wl_supp_align_phase_shift |
| 1386 | (dev_num, if_id, bus_id, adll_offset, 0) == MV_OK) { |
| 1387 | DEBUG_LEVELING( |
| 1388 | DEBUG_LEVEL_TRACE, |
| 1389 | ("WL Supp: IF %d bus_id %d adll_offset= %d Success !\n", |
| 1390 | if_id, bus_id, adll_offset)); |
| 1391 | continue; |
| 1392 | } else { |
| 1393 | DEBUG_LEVELING( |
| 1394 | DEBUG_LEVEL_ERROR, |
| 1395 | ("WL Supp: IF %d bus_id %d Failed !\n", |
| 1396 | if_id, bus_id)); |
| 1397 | is_if_fail = 1; |
| 1398 | } |
| 1399 | } |
| 1400 | DEBUG_LEVELING(DEBUG_LEVEL_TRACE, |
| 1401 | ("WL Supp: IF %d bus_id %d is_pup_fail %d\n", |
| 1402 | if_id, bus_id, is_if_fail)); |
| 1403 | |
| 1404 | if (is_if_fail == 1) { |
| 1405 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 1406 | ("WL Supp: IF %d failed\n", if_id)); |
| 1407 | training_result[training_stage][if_id] = TEST_FAILED; |
| 1408 | } else { |
| 1409 | training_result[training_stage][if_id] = TEST_SUCCESS; |
| 1410 | } |
| 1411 | } |
| 1412 | |
| 1413 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1414 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1415 | if (training_result[training_stage][if_id] == TEST_FAILED) |
| 1416 | return MV_FAIL; |
| 1417 | } |
| 1418 | |
| 1419 | return MV_OK; |
| 1420 | } |
| 1421 | |
| 1422 | /* |
| 1423 | * Phase Shift |
| 1424 | */ |
| 1425 | static int ddr3_tip_wl_supp_align_phase_shift(u32 dev_num, u32 if_id, |
| 1426 | u32 bus_id, u32 offset, |
| 1427 | u32 bus_id_delta) |
| 1428 | { |
| 1429 | wr_supp_res[if_id][bus_id].stage = PHASE_SHIFT; |
| 1430 | if (ddr3_tip_xsb_compare_test(dev_num, if_id, bus_id, |
| 1431 | 0, bus_id_delta) == MV_OK) { |
| 1432 | wr_supp_res[if_id][bus_id].is_pup_fail = 0; |
| 1433 | return MV_OK; |
| 1434 | } else if (ddr3_tip_xsb_compare_test(dev_num, if_id, bus_id, |
| 1435 | ONE_CLOCK_ERROR_SHIFT, |
| 1436 | bus_id_delta) == MV_OK) { |
| 1437 | /* 1 clock error */ |
| 1438 | wr_supp_res[if_id][bus_id].stage = CLOCK_SHIFT; |
| 1439 | DEBUG_LEVELING(DEBUG_LEVEL_TRACE, |
| 1440 | ("Supp: 1 error clock for if %d pup %d with ofsset %d success\n", |
| 1441 | if_id, bus_id, offset)); |
| 1442 | ddr3_tip_wl_supp_one_clk_err_shift(dev_num, if_id, bus_id, 0); |
| 1443 | wr_supp_res[if_id][bus_id].is_pup_fail = 0; |
| 1444 | return MV_OK; |
| 1445 | } else if (ddr3_tip_xsb_compare_test(dev_num, if_id, bus_id, |
| 1446 | ALIGN_ERROR_SHIFT, |
| 1447 | bus_id_delta) == MV_OK) { |
| 1448 | /* align error */ |
| 1449 | DEBUG_LEVELING(DEBUG_LEVEL_TRACE, |
| 1450 | ("Supp: align error for if %d pup %d with ofsset %d success\n", |
| 1451 | if_id, bus_id, offset)); |
| 1452 | wr_supp_res[if_id][bus_id].stage = ALIGN_SHIFT; |
| 1453 | ddr3_tip_wl_supp_align_err_shift(dev_num, if_id, bus_id, 0); |
| 1454 | wr_supp_res[if_id][bus_id].is_pup_fail = 0; |
| 1455 | return MV_OK; |
| 1456 | } else { |
| 1457 | wr_supp_res[if_id][bus_id].is_pup_fail = 1; |
| 1458 | return MV_FAIL; |
| 1459 | } |
| 1460 | } |
| 1461 | |
| 1462 | /* |
| 1463 | * Compare Test |
| 1464 | */ |
| 1465 | static int ddr3_tip_xsb_compare_test(u32 dev_num, u32 if_id, u32 bus_id, |
| 1466 | u32 edge_offset, u32 bus_id_delta) |
| 1467 | { |
| 1468 | u32 num_of_succ_byte_compare, word_in_pattern, abs_offset; |
| 1469 | u32 word_offset, i; |
| 1470 | u32 read_pattern[TEST_PATTERN_LENGTH * 2]; |
| 1471 | struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); |
| 1472 | u32 pattern_test_pattern_table[8]; |
| 1473 | |
| 1474 | for (i = 0; i < 8; i++) { |
| 1475 | pattern_test_pattern_table[i] = |
| 1476 | pattern_table_get_word(dev_num, PATTERN_TEST, (u8)i); |
| 1477 | } |
| 1478 | |
| 1479 | /* extern write, than read and compare */ |
| 1480 | CHECK_STATUS(ddr3_tip_ext_write |
| 1481 | (dev_num, if_id, |
| 1482 | (pattern_table[PATTERN_TEST].start_addr + |
| 1483 | ((SDRAM_CS_SIZE + 1) * effective_cs)), 1, |
| 1484 | pattern_test_pattern_table)); |
| 1485 | |
| 1486 | CHECK_STATUS(ddr3_tip_reset_fifo_ptr(dev_num)); |
| 1487 | |
| 1488 | CHECK_STATUS(ddr3_tip_ext_read |
| 1489 | (dev_num, if_id, |
| 1490 | (pattern_table[PATTERN_TEST].start_addr + |
| 1491 | ((SDRAM_CS_SIZE + 1) * effective_cs)), 1, read_pattern)); |
| 1492 | |
| 1493 | DEBUG_LEVELING( |
| 1494 | DEBUG_LEVEL_TRACE, |
| 1495 | ("XSB-compt: IF %d bus_id %d 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", |
| 1496 | if_id, bus_id, read_pattern[0], read_pattern[1], |
| 1497 | read_pattern[2], read_pattern[3], read_pattern[4], |
| 1498 | read_pattern[5], read_pattern[6], read_pattern[7])); |
| 1499 | |
| 1500 | /* compare byte per pup */ |
| 1501 | num_of_succ_byte_compare = 0; |
| 1502 | for (word_in_pattern = start_xsb_offset; |
| 1503 | word_in_pattern < (TEST_PATTERN_LENGTH * 2); word_in_pattern++) { |
| 1504 | word_offset = word_in_pattern + edge_offset; |
| 1505 | if ((word_offset > (TEST_PATTERN_LENGTH * 2 - 1)) || |
| 1506 | (word_offset < 0)) |
| 1507 | continue; |
| 1508 | |
| 1509 | if ((read_pattern[word_in_pattern] & pup_mask_table[bus_id]) == |
| 1510 | (pattern_test_pattern_table[word_offset] & |
| 1511 | pup_mask_table[bus_id])) |
| 1512 | num_of_succ_byte_compare++; |
| 1513 | } |
| 1514 | |
| 1515 | abs_offset = (edge_offset > 0) ? edge_offset : -edge_offset; |
| 1516 | if (num_of_succ_byte_compare == ((TEST_PATTERN_LENGTH * 2) - |
| 1517 | abs_offset - start_xsb_offset)) { |
| 1518 | DEBUG_LEVELING( |
| 1519 | DEBUG_LEVEL_TRACE, |
| 1520 | ("XSB-compt: IF %d bus_id %d num_of_succ_byte_compare %d - Success\n", |
| 1521 | if_id, bus_id, num_of_succ_byte_compare)); |
| 1522 | return MV_OK; |
| 1523 | } else { |
| 1524 | DEBUG_LEVELING( |
| 1525 | DEBUG_LEVEL_TRACE, |
| 1526 | ("XSB-compt: IF %d bus_id %d num_of_succ_byte_compare %d - Fail !\n", |
| 1527 | if_id, bus_id, num_of_succ_byte_compare)); |
| 1528 | |
| 1529 | DEBUG_LEVELING( |
| 1530 | DEBUG_LEVEL_TRACE, |
| 1531 | ("XSB-compt: expected 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", |
| 1532 | pattern_test_pattern_table[0], |
| 1533 | pattern_test_pattern_table[1], |
| 1534 | pattern_test_pattern_table[2], |
| 1535 | pattern_test_pattern_table[3], |
| 1536 | pattern_test_pattern_table[4], |
| 1537 | pattern_test_pattern_table[5], |
| 1538 | pattern_test_pattern_table[6], |
| 1539 | pattern_test_pattern_table[7])); |
| 1540 | DEBUG_LEVELING( |
| 1541 | DEBUG_LEVEL_TRACE, |
| 1542 | ("XSB-compt: recieved 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", |
| 1543 | read_pattern[0], read_pattern[1], |
| 1544 | read_pattern[2], read_pattern[3], |
| 1545 | read_pattern[4], read_pattern[5], |
| 1546 | read_pattern[6], read_pattern[7])); |
| 1547 | |
| 1548 | DEBUG_LEVELING( |
| 1549 | DEBUG_LEVEL_TRACE, |
| 1550 | ("XSB-compt: IF %d bus_id %d num_of_succ_byte_compare %d - Fail !\n", |
| 1551 | if_id, bus_id, num_of_succ_byte_compare)); |
| 1552 | |
| 1553 | return MV_FAIL; |
| 1554 | } |
| 1555 | } |
| 1556 | |
| 1557 | /* |
| 1558 | * Clock error shift - function moves the write leveling delay 1cc forward |
| 1559 | */ |
| 1560 | static int ddr3_tip_wl_supp_one_clk_err_shift(u32 dev_num, u32 if_id, |
| 1561 | u32 bus_id, u32 bus_id_delta) |
| 1562 | { |
| 1563 | int phase, adll; |
| 1564 | u32 data; |
| 1565 | DEBUG_LEVELING(DEBUG_LEVEL_TRACE, ("One_clk_err_shift\n")); |
| 1566 | |
| 1567 | CHECK_STATUS(ddr3_tip_bus_read |
| 1568 | (dev_num, if_id, ACCESS_TYPE_UNICAST, bus_id, |
| 1569 | DDR_PHY_DATA, WL_PHY_REG, &data)); |
| 1570 | phase = ((data >> 6) & 0x7); |
| 1571 | adll = data & 0x1f; |
| 1572 | DEBUG_LEVELING(DEBUG_LEVEL_TRACE, |
| 1573 | ("One_clk_err_shift: IF %d bus_id %d phase %d adll %d\n", |
| 1574 | if_id, bus_id, phase, adll)); |
| 1575 | |
| 1576 | if ((phase == 0) || (phase == 1)) { |
| 1577 | CHECK_STATUS(ddr3_tip_bus_read_modify_write |
| 1578 | (dev_num, ACCESS_TYPE_UNICAST, if_id, bus_id, |
| 1579 | DDR_PHY_DATA, 0, (phase + 2), 0x1f)); |
| 1580 | } else if (phase == 2) { |
| 1581 | if (adll < 6) { |
| 1582 | data = (3 << 6) + (0x1f); |
| 1583 | CHECK_STATUS(ddr3_tip_bus_read_modify_write |
| 1584 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 1585 | bus_id, DDR_PHY_DATA, 0, data, |
| 1586 | (0x7 << 6 | 0x1f))); |
| 1587 | data = 0x2f; |
| 1588 | CHECK_STATUS(ddr3_tip_bus_read_modify_write |
| 1589 | (dev_num, ACCESS_TYPE_UNICAST, if_id, |
| 1590 | bus_id, DDR_PHY_DATA, 1, data, 0x3f)); |
| 1591 | } |
| 1592 | } else { |
| 1593 | /* phase 3 */ |
| 1594 | return MV_FAIL; |
| 1595 | } |
| 1596 | |
| 1597 | return MV_OK; |
| 1598 | } |
| 1599 | |
| 1600 | /* |
| 1601 | * Align error shift |
| 1602 | */ |
| 1603 | static int ddr3_tip_wl_supp_align_err_shift(u32 dev_num, u32 if_id, |
| 1604 | u32 bus_id, u32 bus_id_delta) |
| 1605 | { |
| 1606 | int phase, adll; |
| 1607 | u32 data; |
| 1608 | |
| 1609 | /* Shift WL result 1 phase back */ |
| 1610 | CHECK_STATUS(ddr3_tip_bus_read(dev_num, if_id, ACCESS_TYPE_UNICAST, |
| 1611 | bus_id, DDR_PHY_DATA, WL_PHY_REG, |
| 1612 | &data)); |
| 1613 | phase = ((data >> 6) & 0x7); |
| 1614 | adll = data & 0x1f; |
| 1615 | DEBUG_LEVELING( |
| 1616 | DEBUG_LEVEL_TRACE, |
| 1617 | ("Wl_supp_align_err_shift: IF %d bus_id %d phase %d adll %d\n", |
| 1618 | if_id, bus_id, phase, adll)); |
| 1619 | |
| 1620 | if (phase < 2) { |
| 1621 | if (adll > 0x1a) { |
| 1622 | if (phase == 0) |
| 1623 | return MV_FAIL; |
| 1624 | |
| 1625 | if (phase == 1) { |
| 1626 | data = 0; |
| 1627 | CHECK_STATUS(ddr3_tip_bus_read_modify_write |
| 1628 | (dev_num, ACCESS_TYPE_UNICAST, |
| 1629 | if_id, bus_id, DDR_PHY_DATA, |
| 1630 | 0, data, (0x7 << 6 | 0x1f))); |
| 1631 | data = 0xf; |
| 1632 | CHECK_STATUS(ddr3_tip_bus_read_modify_write |
| 1633 | (dev_num, ACCESS_TYPE_UNICAST, |
| 1634 | if_id, bus_id, DDR_PHY_DATA, |
| 1635 | 1, data, 0x1f)); |
| 1636 | return MV_OK; |
| 1637 | } |
| 1638 | } else { |
| 1639 | return MV_FAIL; |
| 1640 | } |
| 1641 | } else if ((phase == 2) || (phase == 3)) { |
| 1642 | phase = phase - 2; |
| 1643 | data = (phase << 6) + (adll & 0x1f); |
| 1644 | CHECK_STATUS(ddr3_tip_bus_read_modify_write |
| 1645 | (dev_num, ACCESS_TYPE_UNICAST, if_id, bus_id, |
| 1646 | DDR_PHY_DATA, 0, data, (0x7 << 6 | 0x1f))); |
| 1647 | return MV_OK; |
| 1648 | } else { |
| 1649 | DEBUG_LEVELING(DEBUG_LEVEL_ERROR, |
| 1650 | ("Wl_supp_align_err_shift: unexpected phase\n")); |
| 1651 | |
| 1652 | return MV_FAIL; |
| 1653 | } |
| 1654 | |
| 1655 | return MV_OK; |
| 1656 | } |
| 1657 | |
| 1658 | /* |
| 1659 | * Dynamic write leveling sequence |
| 1660 | */ |
| 1661 | static int ddr3_tip_dynamic_write_leveling_seq(u32 dev_num) |
| 1662 | { |
| 1663 | u32 bus_id, dq_id; |
| 1664 | u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); |
| 1665 | u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); |
| 1666 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 1667 | |
| 1668 | CHECK_STATUS(ddr3_tip_if_write |
| 1669 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1670 | TRAINING_SW_2_REG, 0x1, 0x5)); |
| 1671 | CHECK_STATUS(ddr3_tip_if_write |
| 1672 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1673 | TRAINING_WRITE_LEVELING_REG, 0x50, 0xff)); |
| 1674 | CHECK_STATUS(ddr3_tip_if_write |
| 1675 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1676 | TRAINING_WRITE_LEVELING_REG, 0x5c, 0xff)); |
| 1677 | CHECK_STATUS(ddr3_tip_if_write |
| 1678 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1679 | ODPG_TRAINING_CONTROL_REG, 0x381b82, 0x3c3faf)); |
| 1680 | CHECK_STATUS(ddr3_tip_if_write |
| 1681 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1682 | ODPG_OBJ1_OPCODE_REG, (0x3 << 25), (0x3ffff << 9))); |
| 1683 | CHECK_STATUS(ddr3_tip_if_write |
| 1684 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1685 | ODPG_OBJ1_ITER_CNT_REG, 0x80, 0xffff)); |
| 1686 | CHECK_STATUS(ddr3_tip_if_write |
| 1687 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1688 | ODPG_WRITE_LEVELING_DONE_CNTR_REG, 0x14, 0xff)); |
| 1689 | CHECK_STATUS(ddr3_tip_if_write |
| 1690 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1691 | TRAINING_WRITE_LEVELING_REG, 0xff5c, 0xffff)); |
| 1692 | |
| 1693 | /* mask PBS */ |
| 1694 | for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) { |
| 1695 | CHECK_STATUS(ddr3_tip_if_write |
| 1696 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1697 | mask_results_dq_reg_map[dq_id], 0x1 << 24, |
| 1698 | 0x1 << 24)); |
| 1699 | } |
| 1700 | |
| 1701 | /* Mask all results */ |
| 1702 | for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { |
| 1703 | CHECK_STATUS(ddr3_tip_if_write |
| 1704 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1705 | mask_results_pup_reg_map[bus_id], 0x1 << 24, |
| 1706 | 0x1 << 24)); |
| 1707 | } |
| 1708 | |
| 1709 | /* Unmask only wanted */ |
| 1710 | for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { |
| 1711 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); |
| 1712 | CHECK_STATUS(ddr3_tip_if_write |
| 1713 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1714 | mask_results_pup_reg_map[bus_id], 0, 0x1 << 24)); |
| 1715 | } |
| 1716 | |
| 1717 | CHECK_STATUS(ddr3_tip_if_write |
| 1718 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1719 | WR_LEVELING_DQS_PATTERN_REG, 0x1, 0x1)); |
| 1720 | |
| 1721 | return MV_OK; |
| 1722 | } |
| 1723 | |
| 1724 | /* |
| 1725 | * Dynamic read leveling sequence |
| 1726 | */ |
| 1727 | static int ddr3_tip_dynamic_read_leveling_seq(u32 dev_num) |
| 1728 | { |
| 1729 | u32 bus_id, dq_id; |
| 1730 | u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); |
| 1731 | u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); |
| 1732 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 1733 | |
| 1734 | /* mask PBS */ |
| 1735 | for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) { |
| 1736 | CHECK_STATUS(ddr3_tip_if_write |
| 1737 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1738 | mask_results_dq_reg_map[dq_id], 0x1 << 24, |
| 1739 | 0x1 << 24)); |
| 1740 | } |
| 1741 | |
| 1742 | /* Mask all results */ |
| 1743 | for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { |
| 1744 | CHECK_STATUS(ddr3_tip_if_write |
| 1745 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1746 | mask_results_pup_reg_map[bus_id], 0x1 << 24, |
| 1747 | 0x1 << 24)); |
| 1748 | } |
| 1749 | |
| 1750 | /* Unmask only wanted */ |
| 1751 | for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { |
| 1752 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); |
| 1753 | CHECK_STATUS(ddr3_tip_if_write |
| 1754 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1755 | mask_results_pup_reg_map[bus_id], 0, 0x1 << 24)); |
| 1756 | } |
| 1757 | |
| 1758 | return MV_OK; |
| 1759 | } |
| 1760 | |
| 1761 | /* |
| 1762 | * Dynamic read leveling sequence |
| 1763 | */ |
| 1764 | static int ddr3_tip_dynamic_per_bit_read_leveling_seq(u32 dev_num) |
| 1765 | { |
| 1766 | u32 bus_id, dq_id; |
| 1767 | u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); |
| 1768 | u16 *mask_results_dq_reg_map = ddr3_tip_get_mask_results_dq_reg(); |
| 1769 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 1770 | |
| 1771 | /* mask PBS */ |
| 1772 | for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) { |
| 1773 | CHECK_STATUS(ddr3_tip_if_write |
| 1774 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1775 | mask_results_dq_reg_map[dq_id], 0x1 << 24, |
| 1776 | 0x1 << 24)); |
| 1777 | } |
| 1778 | |
| 1779 | /* Mask all results */ |
| 1780 | for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; bus_id++) { |
| 1781 | CHECK_STATUS(ddr3_tip_if_write |
| 1782 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1783 | mask_results_pup_reg_map[bus_id], 0x1 << 24, |
| 1784 | 0x1 << 24)); |
| 1785 | } |
| 1786 | |
| 1787 | /* Unmask only wanted */ |
| 1788 | for (dq_id = 0; dq_id < MAX_DQ_NUM; dq_id++) { |
| 1789 | VALIDATE_ACTIVE(tm->bus_act_mask, dq_id / 8); |
| 1790 | CHECK_STATUS(ddr3_tip_if_write |
| 1791 | (dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, |
| 1792 | mask_results_dq_reg_map[dq_id], 0x0 << 24, |
| 1793 | 0x1 << 24)); |
| 1794 | } |
| 1795 | |
| 1796 | return MV_OK; |
| 1797 | } |
| 1798 | |
| 1799 | /* |
| 1800 | * Print write leveling supplementary results |
| 1801 | */ |
| 1802 | int ddr3_tip_print_wl_supp_result(u32 dev_num) |
| 1803 | { |
| 1804 | u32 bus_id = 0, if_id = 0; |
| 1805 | struct hws_topology_map *tm = ddr3_get_topology_map(); |
| 1806 | |
| 1807 | DEBUG_LEVELING(DEBUG_LEVEL_INFO, |
| 1808 | ("I/F0 PUP0 Result[0 - success, 1-fail] ...\n")); |
| 1809 | |
| 1810 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1811 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1812 | for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; |
| 1813 | bus_id++) { |
| 1814 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); |
| 1815 | DEBUG_LEVELING(DEBUG_LEVEL_INFO, |
| 1816 | ("%d ,", wr_supp_res[if_id] |
| 1817 | [bus_id].is_pup_fail)); |
| 1818 | } |
| 1819 | } |
| 1820 | DEBUG_LEVELING( |
| 1821 | DEBUG_LEVEL_INFO, |
| 1822 | ("I/F0 PUP0 Stage[0-phase_shift, 1-clock_shift, 2-align_shift] ...\n")); |
| 1823 | |
| 1824 | for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { |
| 1825 | VALIDATE_ACTIVE(tm->if_act_mask, if_id); |
| 1826 | for (bus_id = 0; bus_id < tm->num_of_bus_per_interface; |
| 1827 | bus_id++) { |
| 1828 | VALIDATE_ACTIVE(tm->bus_act_mask, bus_id); |
| 1829 | DEBUG_LEVELING(DEBUG_LEVEL_INFO, |
| 1830 | ("%d ,", wr_supp_res[if_id] |
| 1831 | [bus_id].stage)); |
| 1832 | } |
| 1833 | } |
| 1834 | |
| 1835 | return MV_OK; |
| 1836 | } |