blob: 1abd0eff0f5c0b55bf10f9738a5deaec8c52f8a4 [file] [log] [blame]
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +01001/*
2 * (C) Copyright 2008
3 * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
4 * This work has been supported by: QTechnology http://qtec.com/
5 *
6 * (C) Copyright 2008
7 * Georg Schardt <schardt@team-ctech.de>
8 *
Wolfgang Denkd79de1d2013-07-08 09:37:19 +02009 * SPDX-License-Identifier: GPL-2.0+
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010010*/
11
12#ifndef __CONFIG_XLX_H
13#define __CONFIG_XLX_H
Ricardo Ribaldae5147aa2015-05-12 16:20:29 +020014
Ricardo Ribaldae5147aa2015-05-12 16:20:29 +020015
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010016/*
17#define DEBUG
18#define ET_DEBUG
19*/
20
21/*Mem Map*/
22#define CONFIG_SYS_SDRAM_BASE 0x0
Wolfgang Denk0708bc62010-10-07 21:51:12 +020023#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010024#define CONFIG_SYS_MONITOR_LEN (192 * 1024)
25#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
26
27/*Cmd*/
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010028#define CONFIG_CMD_ASKENV
29#define CONFIG_CMD_CACHE
30#define CONFIG_CMD_DIAG
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010031#define CONFIG_CMD_IRQ
32#define CONFIG_CMD_REGINFO
33#undef CONFIG_CMD_JFFS2
Stefan Roeseb1423dd2009-03-19 13:30:36 +010034#undef CONFIG_CMD_MTDPARTS
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010035#undef CONFIG_CMD_SPI
36#undef CONFIG_CMD_I2C
37#undef CONFIG_CMD_DTT
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010038#undef CONFIG_CMD_PING
39#undef CONFIG_CMD_DHCP
40#undef CONFIG_CMD_EEPROM
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010041
42/*Misc*/
43#define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */
44#define CONFIG_SYS_LONGHELP /* undef to save memory */
45#if defined(CONFIG_CMD_KGDB)
46#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
47#else
48#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */
49#endif
50#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +\
51 sizeof(CONFIG_SYS_PROMPT) + 16)
52#define CONFIG_SYS_MAXARGS 16
53 /* max number of command args */
54#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
55 /* Boot Argument Buffer Size */
56#define CONFIG_SYS_MEMTEST_START 0x00400000
57 /* memtest works on */
58#define CONFIG_SYS_MEMTEST_END 0x00C00000
59 /* 4 ... 12 MB in DRAM */
60#define CONFIG_SYS_LOAD_ADDR 0x00400000
61 /* default load address */
62#define CONFIG_SYS_EXTBDINFO 1
63 /* Extended board_into (bd_t) */
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010064 /* decrementer freq: 1 ms ticks */
65#define CONFIG_CMDLINE_EDITING /* add command line history */
66#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
67#define CONFIG_LOOPW /* enable loopw command */
68#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
69#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
70#define CONFIG_VERSION_VARIABLE /* include version env variable */
71#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
72#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010073#define CONFIG_LOADS_ECHO /* echo on for serial download */
74#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
75#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
76 /* Initial Memory map for Linux */
77
78/*Stack*/
79#define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */
Wolfgang Denk1c2e98e2010-10-26 13:32:32 +020080#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
Wolfgang Denk1c2e98e2010-10-26 13:32:32 +020081#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
Wolfgang Denk0191e472010-10-26 14:34:52 +020082 - GENERATED_GBL_DATA_SIZE)
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010083#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
84/*Speed*/
85#define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ
86
87/*Flash*/
88#ifdef XPAR_FLASH_MEM0_BASEADDR
89#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
90#define CONFIG_SYS_FLASH_CFI 1
91#define CONFIG_FLASH_CFI_DRIVER 1
92#define CONFIG_SYS_FLASH_EMPTY_INFO 1
93#define CONFIG_SYS_MAX_FLASH_BANKS 1
94#define CONFIG_SYS_FLASH_PROTECTION
95#define CONFIG_CMD_JFFS2
Stefan Roeseb1423dd2009-03-19 13:30:36 +010096#define CONFIG_CMD_MTDPARTS
Stefan Roese5dc958f2009-05-12 14:32:58 +020097#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
98#define CONFIG_FLASH_CFI_MTD
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +010099#else
100#define CONFIG_ENV_IS_NOWHERE
101#define CONFIG_SYS_NO_FLASH
102#endif
103
104/* serial communication */
105#ifdef XPAR_UARTLITE_0_BASEADDR
106#define CONFIG_XILINX_UARTLITE
Rommel Custodio7163a882012-09-24 13:27:05 +0000107#define XILINX_UARTLITE_BASEADDR XPAR_UARTLITE_0_BASEADDR
Ricardo Ribalda Delgado63d0ac92008-10-27 12:35:59 +0100108#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE
109#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
110#else
111#ifdef XPAR_UARTNS550_0_BASEADDR
112#define CONFIG_SYS_NS16550
113#define CONFIG_SYS_NS16550_SERIAL
114#define CONFIG_SYS_NS16550_REG_SIZE 4
115#define CONFIG_CONS_INDEX 1
116#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR
117#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ
118#define CONFIG_BAUDRATE 115200
119#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 }
120#endif
121#endif
122
123#endif /* __CONFIG_H */