| Lukasz Majewski | f3adb66 | 2019-12-08 22:06:56 +0100 | [diff] [blame] | 1 | CONFIG_ARM=y |
| 2 | CONFIG_SPL_SYS_THUMB_BUILD=y |
| 3 | CONFIG_ARCH_MX28=y |
| 4 | CONFIG_SYS_TEXT_BASE=0x40002000 |
| 5 | CONFIG_SPL_GPIO_SUPPORT=y |
| 6 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| 7 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| 8 | CONFIG_SYS_MALLOC_F_LEN=0x800 |
| 9 | CONFIG_SPL_DM_SPI=y |
| 10 | CONFIG_TARGET_XEA=y |
| 11 | CONFIG_SPL_MMC_SUPPORT=y |
| 12 | CONFIG_SPL_SERIAL_SUPPORT=y |
| 13 | CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000 |
| 14 | CONFIG_NR_DRAM_BANKS=1 |
| 15 | CONFIG_SPL=y |
| 16 | CONFIG_SPL_SPI_FLASH_SUPPORT=y |
| 17 | CONFIG_SPL_SPI_SUPPORT=y |
| 18 | CONFIG_SPL_TEXT_BASE=0x1000 |
| 19 | CONFIG_FIT=y |
| 20 | CONFIG_BOARD_EARLY_INIT_F=y |
| 21 | CONFIG_SPL_BOARD_INIT=y |
| 22 | # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set |
| 23 | CONFIG_SPL_SYS_MALLOC_SIMPLE=y |
| 24 | CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y |
| 25 | CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0 |
| 26 | CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y |
| 27 | CONFIG_SPL_DMA_SUPPORT=y |
| 28 | CONFIG_SPL_DM_GPIO=y |
| 29 | CONFIG_SPL_FORCE_MMC_BOOT=y |
| 30 | CONFIG_SPL_MMC_TINY=y |
| 31 | CONFIG_SPL_OS_BOOT=y |
| 32 | CONFIG_SPL_PAYLOAD="u-boot.img" |
| 33 | CONFIG_SPL_SPI_LOAD=y |
| 34 | CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 |
| 35 | CONFIG_HUSH_PARSER=y |
| 36 | CONFIG_CMD_SPL=y |
| 37 | CONFIG_CMD_ASKENV=y |
| 38 | CONFIG_CMD_GREPENV=y |
| 39 | CONFIG_CMD_DM=y |
| 40 | CONFIG_CMD_GPIO=y |
| 41 | CONFIG_CMD_MMC=y |
| 42 | CONFIG_CMD_MTD=y |
| 43 | # CONFIG_CMD_PINMUX is not set |
| 44 | CONFIG_CMD_SPI=y |
| 45 | CONFIG_CMD_DHCP=y |
| 46 | CONFIG_CMD_MII=y |
| 47 | CONFIG_CMD_PING=y |
| 48 | CONFIG_CMD_CACHE=y |
| 49 | CONFIG_CMD_REGULATOR=y |
| 50 | CONFIG_CMD_EXT4=y |
| 51 | CONFIG_CMD_FS_GENERIC=y |
| 52 | CONFIG_CMD_MTDPARTS=y |
| 53 | CONFIG_MTDIDS_DEFAULT="nor0=spi3.0" |
| 54 | CONFIG_MTDPARTS_DEFAULT="spi3.0:64k(SPL),448k(uboot),128k(envs),384k(unused1),4096k(kernel),8192k(swupdate),-(unused2)" |
| 55 | CONFIG_DOS_PARTITION=y |
| 56 | CONFIG_OF_CONTROL=y |
| 57 | CONFIG_SPL_OF_CONTROL=y |
| 58 | CONFIG_DEFAULT_DEVICE_TREE="imx28-xea" |
| 59 | CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent interrupts" |
| 60 | CONFIG_SPL_OF_PLATDATA=y |
| 61 | CONFIG_ENV_IS_IN_SPI_FLASH=y |
| 62 | CONFIG_USE_ENV_SPI_BUS=y |
| 63 | CONFIG_ENV_SPI_BUS=3 |
| 64 | CONFIG_USE_ENV_SPI_CS=y |
| 65 | CONFIG_ENV_SPI_CS=0 |
| 66 | CONFIG_USE_ENV_SPI_MAX_HZ=y |
| 67 | CONFIG_ENV_SPI_MAX_HZ=40000000 |
| 68 | CONFIG_USE_ENV_SPI_MODE=y |
| 69 | CONFIG_ENV_SPI_MODE=0x0 |
| 70 | CONFIG_NET_RANDOM_ETHADDR=y |
| 71 | CONFIG_DM=y |
| 72 | CONFIG_SPL_DM=y |
| 73 | CONFIG_DEVRES=y |
| 74 | CONFIG_DM_GPIO=y |
| 75 | CONFIG_MXS_GPIO=y |
| 76 | CONFIG_DM_MMC=y |
| 77 | CONFIG_SUPPORT_EMMC_BOOT=y |
| 78 | CONFIG_MMC_MXS=y |
| 79 | CONFIG_MTD=y |
| 80 | CONFIG_MTD_DEVICE=y |
| 81 | CONFIG_DM_SPI_FLASH=y |
| 82 | CONFIG_SF_DEFAULT_BUS=3 |
| 83 | CONFIG_SF_DEFAULT_MODE=0x0 |
| 84 | CONFIG_SF_DEFAULT_SPEED=40000000 |
| 85 | CONFIG_SPI_FLASH_SFDP_SUPPORT=y |
| 86 | CONFIG_SPI_FLASH_ISSI=y |
| 87 | CONFIG_SPI_FLASH_SPANSION=y |
| 88 | CONFIG_SPI_FLASH_STMICRO=y |
| 89 | # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set |
| 90 | CONFIG_PHYLIB=y |
| 91 | CONFIG_PHY_ADDR_ENABLE=y |
| 92 | CONFIG_PHY_ADDR=1 |
| 93 | CONFIG_PHY_FIXED=y |
| 94 | CONFIG_DM_ETH=y |
| 95 | CONFIG_FEC_MXC=y |
| 96 | CONFIG_MII=y |
| 97 | CONFIG_PINCTRL=y |
| 98 | CONFIG_PINCTRL_MXS=y |
| 99 | CONFIG_DM_REGULATOR=y |
| 100 | CONFIG_DM_REGULATOR_FIXED=y |
| 101 | CONFIG_DM_REGULATOR_GPIO=y |
| 102 | CONFIG_CONS_INDEX=0 |
| 103 | CONFIG_SPI=y |
| 104 | CONFIG_DM_SPI=y |
| 105 | CONFIG_MXS_SPI=y |
| 106 | CONFIG_FS_FAT=y |
| 107 | # CONFIG_SPL_OF_LIBFDT is not set |
| 108 | # CONFIG_EFI_LOADER is not set |