blob: 11b9ceb54756ad7c094119e3891f26c7e591e0ce [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Lukasz Majewskibe44b182017-01-27 23:16:29 +01002/*
3 * Copyright (C) 2016-2017
4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
Lukasz Majewskibe44b182017-01-27 23:16:29 +01005 */
6
7#ifndef __CONFIG_H
8#define __CONFIG_H
9
Lukasz Majewskibe44b182017-01-27 23:16:29 +010010#include "mx6_common.h"
11
Lukasz Majewskibe44b182017-01-27 23:16:29 +010012#include "imx6_spl.h"
13
Lukasz Majewskibe44b182017-01-27 23:16:29 +010014#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
Lukasz Majewskibe44b182017-01-27 23:16:29 +010015#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
16
17/*
18 * Below defines are set but NOT really used since we by
19 * design force U-Boot run when we boot in development
20 * mode from SD card (SD2)
21 */
22#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
23#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
24#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (0x1000)
Lukasz Majewski97c07802019-10-15 10:28:46 +020025#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
Lukasz Majewskibe44b182017-01-27 23:16:29 +010026
Lukasz Majewskibe44b182017-01-27 23:16:29 +010027#define CONFIG_MXC_UART_BASE UART1_BASE
28
Lukasz Majewskibe44b182017-01-27 23:16:29 +010029/* MMC Configuration */
30#define CONFIG_SYS_FSL_USDHC_NUM 2
31#define CONFIG_SYS_FSL_ESDHC_ADDR 0
32
Lukasz Majewskibe44b182017-01-27 23:16:29 +010033/* NOR 16-bit mode */
34#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR
Lukasz Majewskibe44b182017-01-27 23:16:29 +010035#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
Lukasz Majewskibe44b182017-01-27 23:16:29 +010036#define CONFIG_SYS_FLASH_EMPTY_INFO
Lukasz Majewskibe44b182017-01-27 23:16:29 +010037#define CONFIG_FLASH_VERIFY
38
39/* NOR Flash MTD */
Lukasz Majewskibe44b182017-01-27 23:16:29 +010040#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
41#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
42#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) }
43
Lukasz Majewskibe44b182017-01-27 23:16:29 +010044/* Ethernet Configuration */
Lukasz Majewskibe44b182017-01-27 23:16:29 +010045#define IMX_FEC_BASE ENET_BASE_ADDR
Lukasz Majewskibe44b182017-01-27 23:16:29 +010046#define CONFIG_FEC_MXC_PHYADDR 1
Lukasz Majewskibe44b182017-01-27 23:16:29 +010047
Lukasz Majewskibe44b182017-01-27 23:16:29 +010048#define CONFIG_EXTRA_ENV_SETTINGS \
Lukasz Majewskid01bf662017-02-21 22:45:20 +010049 "console=ttymxc0,115200 quiet\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +010050 "fdt_high=0xffffffff\0" \
51 "initrd_high=0xffffffff\0" \
52 "boot_os=yes\0" \
Lukasz Majewski97c07802019-10-15 10:28:46 +020053 "kernelsize=0x300000\0" \
Lukasz Majewski5da443f2019-05-16 09:41:44 +020054 "disable_giga=yes\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +010055 "download_kernel=" \
Lukasz Majewski97c07802019-10-15 10:28:46 +020056 "tftpboot ${loadaddr} ${kernel_file};\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +010057 "get_boot_medium=" \
58 "setenv boot_medium nor;" \
59 "setexpr.l _src_sbmr1 *0x020d8004;" \
60 "setexpr _b_medium ${_src_sbmr1} '&' 0x00000040;" \
61 "if test ${_b_medium} = 40; then " \
62 "setenv boot_medium sdcard;" \
63 "fi\0" \
Lukasz Majewski97c07802019-10-15 10:28:46 +020064 "kernel_file=fitImage\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +010065 "boot_sd=" \
66 "echo '#######################';" \
67 "echo '# Factory SDcard Boot #';" \
68 "echo '#######################';" \
69 "setenv mmcdev 1;" \
70 "setenv mmcfactorydev 0;" \
71 "setenv mmcfactorypart 1;" \
72 "run factory_flash_img;\0" \
73 "boot_nor=" \
74 "setenv kernelnor 0x08180000;" \
Lukasz Majewskid01bf662017-02-21 22:45:20 +010075 "setenv bootargs console=${console} " \
Tom Rini5ad8e112017-10-22 17:55:07 -040076 CONFIG_MTDPARTS_DEFAULT " " \
Lukasz Majewskibe44b182017-01-27 23:16:29 +010077 "root=/dev/mmcblk1 rootfstype=ext4 rw rootwait noinitrd;" \
Lukasz Majewski97c07802019-10-15 10:28:46 +020078 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
79 "bootm ${loadaddr};reset;\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +010080 "boot_recovery=" \
81 "echo '#######################';" \
82 "echo '# RECOVERY SWU Boot #';" \
83 "echo '#######################';" \
84 "setenv rootfsloadaddr 0x13000000;" \
85 "setenv swukernelnor 0x08980000;" \
86 "setenv swurootfsnor 0x09180000;" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +010087 "setenv bootargs console=${console} " \
Tom Rini5ad8e112017-10-22 17:55:07 -040088 CONFIG_MTDPARTS_DEFAULT " " \
Lukasz Majewskibe44b182017-01-27 23:16:29 +010089 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
90 ":${hostname}::off root=/dev/ram rw;" \
91 "cp.l ${swurootfsnor} ${rootfsloadaddr} 0x200000;" \
Lukasz Majewski97c07802019-10-15 10:28:46 +020092 "cp.l ${swukernelnor} ${loadaddr} ${kernelsize};" \
93 "bootm ${loadaddr} ${rootfsloadaddr};reset;\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +010094 "boot_tftp=" \
95 "echo '#######################';" \
96 "echo '# TFTP Boot #';" \
97 "echo '#######################';" \
98 "if run download_kernel; then " \
99 "setenv bootargs console=${console} " \
100 "root=/dev/mmcblk0p2 rootwait;" \
Lukasz Majewski97c07802019-10-15 10:28:46 +0200101 "bootm $loadaddr};reset;" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100102 "fi\0" \
103 "bootcmd=" \
104 "if test -n ${recovery_status}; then " \
105 "run boot_recovery;" \
106 "else " \
107 "if test ! -n ${boot_medium}; then " \
108 "run get_boot_medium;" \
109 "if test ${boot_medium} = sdcard; then " \
110 "run boot_sd;" \
111 "else " \
112 "run boot_nor;" \
113 "fi;" \
114 "else " \
115 "if test ${boot_medium} = tftp; then " \
116 "run boot_tftp;" \
117 "fi;" \
118 "fi;" \
119 "fi\0" \
Tom Rini5ad8e112017-10-22 17:55:07 -0400120 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100121 "bootdev=1\0" \
122 "bootpart=1\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100123 "netdev=eth0\0" \
124 "load_addr=0x11000000\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100125 "uboot_file=u-boot.img\0" \
126 "SPL_file=SPL\0" \
127 "load_uboot=tftp ${load_addr} ${uboot_file}\0" \
128 "nor_img_addr=0x11000000\0" \
129 "nor_img_file=core-image-lwn-mccmon6.nor\0" \
130 "emmc_img_file=core-image-lwn-mccmon6.ext4\0" \
131 "nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
132 "nor_img_size=0x02000000\0" \
133 "factory_script_file=factory.scr\0" \
134 "factory_load_script=" \
135 "if test -e mmc ${mmcdev}:${mmcfactorypart} " \
136 "${factory_script_file}; then " \
137 "load mmc ${mmcdev}:${mmcfactorypart} " \
138 "${loadaddr} ${factory_script_file};" \
139 "fi\0" \
140 "factory_script=echo Running factory script from mmc${mmcdev} ...; " \
141 "source ${loadaddr}\0" \
142 "factory_flash_img="\
143 "echo 'Flash mccmon6 with factory images'; " \
144 "if run factory_load_script; then " \
145 "run factory_script;" \
146 "else " \
147 "echo No factory script: ${factory_script_file} found on " \
148 "device ${mmcdev};" \
149 "run factory_nor_img;" \
150 "run factory_eMMC_img;" \
Lukasz Majewski97c07802019-10-15 10:28:46 +0200151 "run factory_SPL_falcon_setup;" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100152 "fi\0" \
153 "factory_eMMC_img="\
154 "echo 'Update mccmon6 eMMC image'; " \
155 "if load mmc ${mmcdev}:${mmcfactorypart} " \
156 "${loadaddr} ${emmc_img_file}; then " \
157 "setexpr fw_sz ${filesize} / 0x200;" \
158 "setexpr fw_sz ${fw_sz} + 1;" \
159 "mmc dev ${mmcfactorydev};" \
160 "mmc write ${loadaddr} 0x0 ${fw_sz};" \
161 "fi\0" \
162 "factory_nor_img="\
163 "echo 'Update mccmon6 NOR image'; " \
164 "if load mmc ${mmcdev}:${mmcfactorypart} " \
165 "${nor_img_addr} ${nor_img_file}; then " \
166 "run nor_update;" \
167 "fi\0" \
168 "nor_update=" \
169 "protect off ${nor_bank_start} +${nor_img_size};" \
170 "erase ${nor_bank_start} +${nor_img_size};" \
171 "setexpr nor_img_size ${nor_img_size} / 4; " \
172 "cp.l ${nor_img_addr} ${nor_bank_start} ${nor_img_size}\0" \
Lukasz Majewski97c07802019-10-15 10:28:46 +0200173 "factory_SPL_falcon_setup="\
174 "echo 'Write Falcon boot data'; " \
175 "setenv kernelnor 0x08180000;" \
176 "cp.l ${kernelnor} ${loadaddr} ${kernelsize};" \
177 "spl export fdt ${loadaddr};" \
178 "setenv nor_img_addr ${fdtargsaddr};" \
179 "setenv nor_img_size 0x20000;" \
180 "setenv nor_bank_start " \
181 __stringify(CONFIG_CMD_SPL_NOR_OFS)";" \
182 "run nor_update\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100183 "tftp_nor_uboot="\
184 "echo 'Update mccmon6 NOR U-BOOT via TFTP'; " \
185 "setenv nor_img_file u-boot.img; " \
186 "setenv nor_img_size 0x80000; " \
187 "setenv nor_bank_start 0x08080000; " \
188 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
189 "run nor_update;" \
190 "fi\0" \
Lukasz Majewski97c07802019-10-15 10:28:46 +0200191 "tftp_nor_fitImg="\
192 "echo 'Update mccmon6 NOR fitImage via TFTP'; " \
193 "setenv nor_img_file fitImage; " \
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100194 "setenv nor_img_size 0x500000; " \
195 "setenv nor_bank_start 0x08180000; " \
196 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
197 "run nor_update;" \
198 "fi\0" \
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100199 "tftp_nor_img="\
200 "echo 'Update mccmon6 NOR image via TFTP'; " \
201 "if tftpboot ${nor_img_addr} ${nor_img_file}; then " \
202 "run nor_update;" \
203 "fi\0" \
204 "tftp_nor_SPL="\
205 "if tftp ${load_addr} SPL_padded; then " \
206 "erase 0x08000000 +0x20000;" \
207 "cp.b ${load_addr} 0x08000000 0x20000;" \
208 "fi;\0" \
209 "tftp_sd_SPL="\
210 "if mmc dev 1; then " \
211 "if tftp ${load_addr} ${SPL_file}; then " \
212 "setexpr fw_sz ${filesize} / 0x200; " \
213 "setexpr fw_sz ${fw_sz} + 1; " \
214 "mmc write ${load_addr} 0x2 ${fw_sz};" \
215 "fi;" \
216 "fi;\0" \
217 "tftp_sd_uboot="\
218 "if mmc dev 1; then " \
219 "if run load_uboot; then " \
220 "setexpr fw_sz ${filesize} / 0x200; " \
221 "setexpr fw_sz ${fw_sz} + 1; " \
222 "mmc write ${load_addr} 0x8A ${fw_sz};" \
223 "fi;" \
224 "fi;\0"
225
226/* Physical Memory Map */
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100227#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
228
229#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
230#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
231#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
232
233#define CONFIG_SYS_INIT_SP_OFFSET \
234 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
235#define CONFIG_SYS_INIT_SP_ADDR \
236 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
237
238/* Environment organization */
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100239
240/* Envs are stored in NOR flash */
Lukasz Majewskibe44b182017-01-27 23:16:29 +0100241
242#endif /* __CONFIG_H * */