arch/arm/include/asm/arch-tegra/warmboot.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2010, 2011
 * NVIDIA Corporation <www.nvidia.com>
 */

#ifndef _WARM_BOOT_H_
#define _WARM_BOOT_H_

#define STRAP_OPT_A_RAM_CODE_SHIFT	4
#define STRAP_OPT_A_RAM_CODE_MASK	(0xf << STRAP_OPT_A_RAM_CODE_SHIFT)

/* Defines the supported operating modes */
enum fuse_operating_mode {
	MODE_PRODUCTION = 3,
	MODE_UNDEFINED,
};

/* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */
enum {
	HASH_LENGTH = 4
};

/* Defines the storage for a hash value (128 bits) */
struct hash {
	u32 hash[HASH_LENGTH];
};

/*
 * Defines the code header information for the boot rom.
 *
 * The code immediately follows the code header.
 *
 * Note that the code header needs to be 16 bytes aligned to preserve
 * the alignment of relevant data for hash and decryption computations without
 * requiring extra copies to temporary memory areas.
 */
struct wb_header {
	u32 length_insecure;	/* length of the code header */
	u32 reserved[3];
	struct hash hash;	/* hash of header+code, starts next field*/
	struct hash random_aes_block;	/* a data block to aid security. */
	u32 length_secure;	/* length of the code header */
	u32 destination;	/* destination address to put the wb code */
	u32 entry_point;	/* execution address of the wb code */
	u32 code_length;	/* length of the code */
};

/*
 * The warm boot code needs direct access to these registers since it runs in
 * SRAM and cannot call other U-Boot code.
 */
union osc_ctrl_reg {
	struct {
		u32 xoe:1;
		u32 xobp:1;
		u32 reserved0:2;
		u32 xofs:6;
		u32 reserved1:2;
		u32 xods:5;
		u32 reserved2:3;
		u32 oscfi_spare:8;
		u32 pll_ref_div:2;
		u32 osc_freq:2;
	};
	u32 word;
};

union pllx_base_reg {
	struct {
		u32 divm:5;
		u32 reserved0:3;
		u32 divn:10;
		u32 reserved1:2;
		u32 divp:3;
		u32 reserved2:4;
		u32 lock:1;
		u32 reserved3:1;
		u32 ref_dis:1;
		u32 enable:1;
		u32 bypass:1;
	};
	u32 word;
};

union pllx_misc_reg {
	struct {
		u32 vcocon:4;
		u32 lfcon:4;
		u32 cpcon:4;
		u32 lock_sel:6;
		u32 reserved0:1;
		u32 lock_enable:1;
		u32 reserved1:1;
		u32 dccon:1;
		u32 pts:2;
		u32 reserved2:6;
		u32 out1_div_byp:1;
		u32 out1_inv_clk:1;
	};
	u32 word;
};

/*
 * TODO: This register is not documented in the TRM yet. We could move this
 * into the EMC and give it a proper interface, but not while it is
 * undocumented.
 */
union scratch3_reg {
	struct {
		u32 pllx_base_divm:5;
		u32 pllx_base_divn:10;
		u32 pllx_base_divp:3;
		u32 pllx_misc_lfcon:4;
		u32 pllx_misc_cpcon:4;
	};
	u32 word;
};


/**
 * Save warmboot memory settings for a later resume
 *
 * @return 0 if ok, -1 on error
 */
int warmboot_save_sdram_params(void);

int warmboot_prepare_code(u32 seg_address, u32 seg_length);
int sign_data_block(u8 *source, u32 length, u8 *signature);
void wb_start(void);	/* Start of WB assembly code */
void wb_end(void);	/* End of WB assembly code */

#endif